Are you looking for an answer to the topic “gas lantern flame tips“? We answer all your questions at the website https://chewathai27.com/ppa in category: Top 711 tips update new. You will find the answer right below.
You should clean your open flame gas lamp burner tip at least twice a year. To do this, run a piece of dental floss or use a wire brush through the cooled slot in the tip to remove any debris or soot that’s settled in the burner tip, and follow that by rubbing it with a soft cloth.Adjust the flame by inserting a flat head tool or screwdriver through the valve access hole in the collar of the lamp. Turn the valve slowly to adjust the height and shape of the flame. Please note: Turning the valve too fast or too far can cause the flame to extinguish.In addition to installation costs, gas lanterns cost an average of $10 per month each to operate, but can cost three times as much to operate, depending on gas prices in the area. The flame is always on unless you extinguish it. If you have a manual igniter, you will have to relight the flame with a match.
Table of Contents
How do you adjust the flame on a gas lantern?
Adjust the flame by inserting a flat head tool or screwdriver through the valve access hole in the collar of the lamp. Turn the valve slowly to adjust the height and shape of the flame. Please note: Turning the valve too fast or too far can cause the flame to extinguish.
Do you leave gas lanterns on all the time?
In addition to installation costs, gas lanterns cost an average of $10 per month each to operate, but can cost three times as much to operate, depending on gas prices in the area. The flame is always on unless you extinguish it. If you have a manual igniter, you will have to relight the flame with a match.
Do gas lanterns give off enough light?
Gas lanterns are definitely not meant to be a main source of light. They give off enough light to see, but additional layers of light would be helpful.
How much gas do gas lanterns burn?
9 gallons of propane per light per month, on average when burning 24/7.
Choosing Between Gas vs Electric Lanterns
WHY BEVOLO?
Bevolo Gas & Electric Lights takes pride in our business and loves to create lighting that matches the aesthetics of our individual customers. When customers are looking for the right lighting for their home, Bevolo is here to show why our indoor and outdoor lighting options are the best options for them:
Customization – We take care of making your home the right size and style
QUALITY – Bevolo lanterns are lights for life and will be the last you ever need to buy
Beauty – Bevolo lanterns only get more beautiful as the copper ages
Continuity – We never discontinue a style of light
Riveted – Aerospace technology is at the root of the strength of our hand-riveted lights
Sustainable – The purest copper has an expected lifespan of 300 years
Efficiency – Our lights feature the world’s most energy efficient bulb
Longevity – Lifetime burners and secondary baffle systems ensure operability in any climate/environment
LOCALLY MADE – We’re proud to be made not only in the USA, but also in Louisiana in the communities of Orleans, Jefferson, and St. Tammany!
CAN YOU BUY DIRECTLY FROM BEVOLO?
Yes, you can purchase the lights directly from us as the manufacturer. Buying direct keeps our consumers from paying all the typical supply chain markups. Lamps sold at other retailers receive multiple awards because there are so many ‘middlemen’ involved. The end result of Bevolo bringing the product direct to you is value. We are able to supply you with higher quality copper mined and milled in America; Master craftsmanship and superior customer service at reasonable prices.
WILL YOU SEND ME A CATALOG?
To request a physical catalog, please email us through our contact page or call (504) 522-9485.
Or you can click here to download our digital catalogue.
CAN BEVOLO HELP ME CHOOSE MY LAMPS?
Yes, we offer a free design service. Send us your plans, views or photos of the area you wish to address and we will put together a free lighting analysis to show you the right size and style of light that best complements the area. You’ll also get photos, schematics, installation instructions, and even supply locations if needed.
Click here for more information
WHICH PLACE SHOULD I VISIT?
Located in the heart of the French Quarter, Bevolo’s sales force is ready to help you with your lighting needs. Visit one of our locations at 521 Conti Street, 304/316/318 Royal Street or our location in Mandeville. All locations have experienced lighting designers. 521 Conti Street has samples of our gas and electric lights for your design service needs. 316 Royal Street is the Bevolo Gas Light Museum and shop where artisans make lanterns for you to see. 318 Royal Street presents the Bevolo Interior Collection and 304 Royal Street is home to our vintage lamp collection. We also have a location on the highway. 59 in Mandeville, LA
Click here for maps and contact information for each Bevolo showroom.
WHAT DO WE MAKE OUR LIGHTS? WHY DO WE USE COPPER? WHY NOT OTHER METALS?
When you buy a Bevolo lantern, you are making an investment for life! For 70 years, Bevolo has been manufacturing lanterns in New Orleans from the highest quality American copper from the mine. Copper is a corrosion-resistant, malleable, durable, and long-lasting metal that responds well to temperature extremes. These properties make copper an excellent material for our fixtures and a popular building material for roofs, flashings, gutters, domes, vaults and doors. For these reasons, copper has been used in architecture for hundreds of years. Although the initial investment for copper is higher than other metals such as aluminum and zinc, it pays for itself in terms of performance and service life.
In many cases we can manufacture our jigs from 316 stainless steel – an alloy with increased corrosion resistance and greater strength at elevated temperatures. Stainless steel fittings work well in modern spaces. It also gives a transitional twist to classic designs.
WHAT FINISHES OR COLORS DO YOUR LIGHTS COME IN? DO YOU HAVE BLACK OR OIL RIBED BRONZE FINISH?
Oxidizing Bevolo fasteners ensure the lantern ages gracefully and evenly over time. Our signature oxidation has become a Bevolo trademark – a beautiful antique copper shade with warm caramel undertones. This coveted color is exclusive to Bevolo and is used on almost all of our lights. For customers wanting a near black or oil rubbed bronze finish, a dark oxidation may be an option. The dark oxidation further accelerates the aging process of the copper, reaching a deep brown hue that is often read as black from a distance.
DO MY LIGHTS CHANGE COLOR?
One of copper’s greatest attributes is that it ages with your home and develops a beautiful patina. The speed at which your lanterns will patinate is determined by your climate. Climates with high humidity and close proximity to salt water tend to patina much faster than others, eventually developing a green-green or green hue like the Statue of Liberty. We’ve seen lamps achieve a full patina in as little as twelve months and up to fifty years. No two houses will have lights that age exactly the same.
WHAT IS THE CURRENT DELIVERY TIME? CAN I GET MY LIGHTS EXPEDITED?
Due to the impact of Hurricane Ida and COVID, our current lead time is 14 weeks and rush orders have been temporarily suspended. Our typical lead time is 2-4 weeks and we plan to get back to that as soon as possible. You may contact us for more information.
WHAT IF I LIVE IN A WIND AREA?
Bevolo lights are designed to withstand normal wind conditions, but further action may be taken in areas with excessive winds such as the Bahamas, Texas, Oklahoma and coastal areas etc. Bevolo offers a wind deflector, which is a discrete secondary wind blocker that easily attaches to the gas nozzle assembly. This can be added when ordering; It’s also something that’s relatively easy to install in the field. The part itself is made of borosilicate glass, which withstands heat very well. For pictures or installation instructions, please call (504) 522-9485 or contact our sales team.
HOW DO I LIGHT MY BEVOLO LANTERN?
It’s easy! All you need is a lighter or a match. Watch this video to show you how to light your Bevolo lantern.
FLAME OUT SOLUTIONS:
We design our copper fittings to last a lifetime and burn continuously in all climates around the world. We take great care that the gas flame does not blow out. However, in rare circumstances such as high winds, high altitudes, or atypical light placements, customers may have trouble keeping their lanterns burning.
Try these 6 quick and easy tips to fix flare-ups:
Check for clogged or damaged porcelain tip or for discrete cracks/crazing in the glass. Bevolo offers replacement glass and tips designed exclusively for Bevolo lanterns.
Make sure the glass panels are snug and tight against the light frame by pressing the small copper tabs firmly (like the back of a picture frame). The glass may shift during installation or shipping, causing small drafts of air inside the fixture.
Pay attention to the correct flame height. For smaller lanterns, the flame height should be about 1.5 inches to 2 inches high. 2 to 2.5 inches for larger lights. Flames that are too large or too small can lead to blow-out problems.
You should always ensure that the underside of your device is free of debris to ensure proper ventilation. However, if you are constantly having trouble with the flame going out, sometimes it is beneficial to reduce the airflow. This can be achieved by placing pennies on every other vent hole to reduce wind flow.
The problem persists, please take a picture of the installation; Ideally photos showing the inside of the top and bottom of the light, the outside up close and from a sufficient distance to see the roofline so we can fully understand the application. Email us ([email protected]) these photos for a professional evaluation.
If these quick tips didn’t work for you, Bevolo offers a wind deflector, a discreet secondary windscreen that attaches to the gas nozzle assembly. This can be installed at the burner tip to protect the flame from being blown out in strong or unique wind situations; It’s also something that can be easily installed in the field.
SHOULD I USE AN ELECTRONIC IGNITOR TO SWITCH MY GAS LIGHTS ON AND OFF?
Bevolo offers the best electronic igniter in the industry. The decision of whether or not to use an electronic detonator should be weighed based on the individual situation. In many circumstances electronic detonators are not required. One of the reasons people choose Bevolo lights is because of the efficiency of their burner assembly. For an 800-1200 BTU burner, the average cost of continuously starting a lantern is $7-$11. If using an igniter saved $3.50 to $5.50 (half) per month, it would take between 8 and 13 years to recoup the initial cost of the igniter, not counting additional maintenance or replacement costs . In some circumstances, the added convenience of a switch or the ability to relight the lantern justifies the cost; Situations where the lantern is difficult to access, in a second home or sometimes in commercial applications would increase the appeal of this feature. Please contact a Bevolo lighting designer for more details.
SEND?
Yes, we ship all over the world. A shipping quote will be created when you place your order.
CAN YOU CREATE A CUSTOM LANTERN?
Bevolo has over 500 lighting and mount combinations and many of these are custom lights. For each individual request we need views or photos as well as a drawing of the individual device with dimensions. This can be sent to Bevolo via a lighting designer. You can call (504) 522-9485 for a lighting designer.
ENERGY STAR COMPLIANT & TITLE 24:
TITLE 24: UPDATED The California Energy Code, or Title 24, Part 6 of the California Code of Regulations, also titled The Energy Efficiency Standards for Residential and Nonresidential Buildings, was introduced in 1978 to reduce California’s energy use. It’s an energy initiative that the state passed and banned the lightbulbs. To discourage people from using incandescent bulbs, there was a code that required a special socket that would not accept incandescent bulbs. Recently the JA8 change allows the use of standard medium base (E26) sockets as well as candelabra (E14) sockets if the installer is using JA8 compliant bulbs. These bulbs are readily available in areas where they are needed. With this law updated, the standard electrical setup that comes with Bevolo Electric lanterns is eligible for Title 24 territories. Bevolo Lanterns Please contact (504) 522-9485 or [email protected] for more information.
ARE BEVOLO LUMINAIRES APPROVED FOR CANADA?
Yes, Bevolo lights are approved for Canada. Beginning in 2010, Canada requires all exterior fixtures to meet their CSA code and requirements. French ETL and warning labels and instructions accompany the device, as well as the Canadian ETL label.
HOW MUCH DOES IT COST TO USE A BULB IN YOUR LIGHT?
Bevolo electric lanterns can use any medium base bulb including CFL and LED. The annual costs vary depending on the lamp type.
Energy costs of the gas lantern:
Natural Gas – A Bevolo natural gas lantern burns 800-1200 BTUs per hour. About $6-9/month to burn 24/7.
Liquid Propane – A Bevolo liquid propane burns 1200-1500 BTUs per hour. Around $29-$36/month to burn 24/7.
HOW MANY GALLONS OF PROPANE DO YOUR LIGHTS BURN ON AVERAGE?
9 gallons of propane per light per month, averaging when burning 24 hours a day.
Why does my gas lantern keep going out?
Clean the burner tip regularly by running a piece of floss through the cooled slot in the brass stem. If any debris has settled or is stuck in this pathway, the gas may not be flowing properly, which can cause more frequent blowouts.
Choosing Between Gas vs Electric Lanterns
Elegant and easy to maintain, the gas lamps offer a unique design element for the outdoor area of your home. On rare occasions, you may need to troubleshoot problems with your gas lanterns to determine if professional maintenance or repairs are needed. While we recommend hiring a local plumber or gas specialist, we’ve put together a few simple tips to keep your gas lights bright and beautiful.
Basic Gaslight Troubleshooting: Where do I start?
gas mantle lamp v. Open flame gas lamp
There are two basic types of gas lamps and lights: gas mantle lamps, which use a special wick to produce light when supplied with gas and ignited, and open flame gas lamps, which operate without a wick and burn gas directly. Fuel and flame are two things that both types of gas lamps need to function properly, and while your gas lamps shouldn’t require much maintenance, small problems that arise can be resolved by looking at these sources first.
fuel
Gas lanterns run on two types of fuel – either natural gas or liquid propane, depending on the style. Parts of the gas lamp can become blocked and cause your lamp not to burn properly. Here’s what you can do if this happens:
Clean the burner tip: If using a gas mantle burner, turn off the gas and remove the gas light mantle. Carefully slide a felt pipe cleaner through each mantle burner tip and air lock ring openings in the burner base at the bottom of the tube to remove soot or debris. Be sure to use a new gas light hood after removing the old one. If using an open flame torch, run a piece of dental floss through the cooled slot in the tip of the brass shaft and rub with a soft cloth to loosen any soot or debris that may have settled or become lodged in that path .
: If using a gas mantle burner, turn off the gas and remove the gas light mantle. Carefully slide a felt pipe cleaner through each mantle burner tip and air lock ring openings in the burner base at the bottom of the tube to remove soot or debris. Be sure to use a new gas light hood after removing the old one. If using an open flame torch, run a piece of dental floss through the cooled slot in the tip of the brass shaft and rub with a soft cloth to loosen any soot or debris that may have settled or become lodged in that path . Check the insect screen: There are insect screens to prevent bugs from getting into your gas lantern. If the screen becomes blocked, there will not be enough oxygen in your gas lamp and the flame will be smothered. Check your insect screen for obstructions and use air to clean it. If it doesn’t come out clean, replace the insect screen.
If you’ve tried these tricks and your gas lamp still won’t burn properly, it’s time to call a professional. You should check the following:
Check for gas line problems: Gas lamps will only work properly if the gas line supplying the fuel is at least 3/8 inch in diameter. If for any reason a smaller gas line must be used, its length must not exceed 8 feet. A licensed plumber can check and correct incorrect gas line measurements.
: Gas lamps will only work properly if the gas line supplying the fuel is at least 3/8 inch in diameter. If for any reason a smaller gas line must be used, its length must not exceed 8 feet. A licensed plumber can check and correct incorrect gas line measurements. Check the gas light regulator: Your gas lamp should have a regulator in the gas line – if you already have one, have it checked by a professional using standardized test equipment. When using natural gas, a water column of 7 inches of gas pressure should be used. When using liquid propane, a water column of 11 inches of gas pressure should be used. If your light does not have a regulator, one should be installed by a professional. Without a regulator, too much fuel can flow to the gas light causing the air/fuel mixture to become too rich.
Fire
An out-of-doors flame can be dangerous, adding to the cost of wasted fuel.
Manual & Electric Ignition: Manual ignition involves lighting your gas lamp using a flat head tool and a long lighter. With electronic ignition, your gas lamp is lit using a light switch or timer, which remotely creates a spark across the gas and ignites the flame. You cannot use a lighter to ignite the flame of the gas lamp if the manual burner or valve is broken and needs to be replaced. If your gas lamp has an electronic ignition module that has stopped working, it is best to have it checked and replaced by a certified electrician.
With our American Gas Lamp Works Limited Warranty, your lamp’s aluminum body and posts are covered for life. The natural gas burner assembly and socket assembly are covered for five years, GasGlow® LED for two years, powder coated finish for one year against chipping and cracking, and copper/brass housing for 90 days. Glass and coats are not covered under warranty.
Frequently asked questions about gas lamp maintenance
Q: My open flame keeps burning out, what can I do?
To reduce the risk of explosions in your natural gas lamp with an open flame, consider working with a local certified gas specialist to make the following adjustments: Ensure the gas valve is 50-75% open. Often times customers/installers will open the valve 100% to achieve the largest flame, but this can create an air pocket between the burner tip and the bottom of the flame which can lead to frequent bursting. In most cases, simply turning back the valve until the bottom of the flame touches the top of the burner will correct this problem. Periodically clean the torch tip by running a piece of dental floss through the cooled slot in the brass shaft. If debris is lodged or stuck in this path, the gas may not flow properly, leading to more frequent blowouts. Consider buying a windbreak. This physical accessory slips over the burner to add an extra layer of protection from extreme winds. It does not obstruct the appearance of the flame and can easily be added to the burner by you or your installer.
Q: How do I clean a gas lantern tip?
If using a gas mantle burner, carefully slide a felt tube cleaner through each mantle burner tip and the air lock ring holes in the burner base at the bottom of the tube to remove soot or debris. If using an open flame torch, run a piece of dental floss through the cooled slot in the tip of the brass shaft and rub with a soft cloth to loosen any soot or debris that may have settled or become lodged in that path .
Q: How do you turn off or unplug a gas lamp to troubleshoot?
All of our gas lamps have a manual ignition valve in the collar of the lamp. The gas flow can be manually controlled at this point with a flat-head tool (such as a screwdriver). To shut off the gas, simply close the valve with a quarter turn of your tool and turn the valve to the 3 o’clock position. To disconnect your gas lamp from your gas main, consult your gas professional to shut off the main supply so that the valve in the lamp can be isolated from the main inside the post, column or wall.
Q: Do I have to change my coat? If yes, how often?
A damaged sheath should be replaced as soon as possible. In addition to replacing damaged shrouds, we recommend that you replace your shrouds at least once a year to ensure your lamp stays bright and economical in use. Visit our gas lamp mantle maintenance page for more information.
Q: How do I clean my open flame gas lamp?
You should clean the burner tip of your open flame gas lamp at least twice a year. To do this, run a piece of dental floss or a wire brush through the cooled slot in the tip to remove any dirt or grime that has settled in the torch tip, then rub over it with a soft cloth.
Q: Who do I contact if my gas lamp problem persists?
If you’ve tried troubleshooting and are still having trouble with your gas light, contact a local plumber, professional gas lighting specialist, or HVAC contractor. If you purchased lamps from American Gas Lamp Works, contact us directly for warranty information.
These tips and tricks are designed to help you care for and troubleshoot problems with your gas lamp. For more issues and questions, see our frequently asked questions. For the quickest solution, it is best to call a local plumber/gas specialist for an appointment. If you have purchased or are interested in any American Gas Lamp Works product, please contact us directly!
Can you turn gas lanterns on and off?
Yes, all natural gas and propane gas lanterns include a shut-off valve located at the base of the burner that can easily be switched to the off position.
Choosing Between Gas vs Electric Lanterns
Yes, all natural gas and propane lanterns have a shut off valve at the base of the burner that can be easily switched to the off position.
Do gas lanterns attract bugs?
Doesn’t attract insects—nothing can ruin an outdoor event like a swarm of mosquitoes. Gas powered lights give off an amber glow that isn’t attractive to insects. Security—gas lighting will continue to operate during an electrical power outage, increasing the safety and security of the home.
Choosing Between Gas vs Electric Lanterns
Natural gas lighting is a great way to add charm and value to the exterior of homes. Outdoor lighting is becoming increasingly popular as homeowners seek to add a touch of elegance while increasing the security and protection of their property. Natural gas lighting adds a warm glow and ambiance to your homeowner’s front entry, patio, or deck.
points of sale
If you’re trying to convince homebuyers to add natural gas lighting as a feature, don’t forget to mention the following additional benefits:
Doesn’t attract insects – nothing ruins an outdoor event like a swarm of mosquitoes. Gas-powered lamps give off an amber glow that is unattractive to insects.
– Nothing can ruin an outdoor event like a swarm of mosquitoes. Gas-powered lamps give off an amber glow that is unattractive to insects. Security—Gas lighting will continue to operate during a power outage, increasing the security of the home.
—Gas lighting will continue to operate during a power outage, increasing the safety and security of the home. No harsh glare – natural gas lighting is warm and subtle, but emits illumination equivalent to a 60-watt incandescent bulb. Those with quad burners produce as much light as a 100 watt incandescent bulb.
—Natural gas lighting is warm and restrained, but emits illumination equivalent to a 60-watt incandescent bulb. Those with quad burners produce as much light as a 100 watt incandescent bulb. Landscaping – Natural gas lighting casts an attractive glow that can be used to highlight and enhance landscaping.
Homebuyers will also love the fact that natural gas lamps are economical and require little maintenance; Some models last for years. Most feature slide-out tempered glass that’s easy to clean, and there’s no need to change lightbulbs.
styles and options
Natural gas light fixtures come in a variety of styles, materials, and options to suit virtually every homebuyer, from traditional to contemporary. A traditional gas lamp post is a perfect addition to an elegant entryway. Smaller lights can be used to illuminate a sidewalk or path. Tiki torch styles are an excellent choice for a deck or patio. Mounting options include ceiling, post, wall and plinth.
Homebuyers can choose between traditional always-on gas lights or models with daylight-dependent electronic dimmer switches. These switches regulate the flow of natural gas during the day and turn it up after dark. Or think of gas lamps with an electronic gas safety starter on a timer or switch. This feature turns a lamp on at dusk and off at dawn; save up to 50 percent in energy costs. Some models also offer battery-powered, solar-charged switches. Models with efficient gas burners and made from recyclable materials are available for the environmentally conscious homebuyer.
Increased value
The elegance and sophistication of natural gas lights add attractive appeal that can actually increase the value of the home. Homebuyers will appreciate this benefit when they are ready to sell and move to their next residence. Make sure your potential homebuyers can tour the home at night so they can see the unique and distinctive look of natural gas lighting.
When it comes to gas lanterns and lights, we can help you find the best gas light or lantern for your home. Contact us to see how we can help!
Can gas lanterns be used indoors?
Surprisingly, some lantern manufacturers claim that gas fixtures are acceptable indoors, so long as they are properly vented, equipped with an electronic ignition, CSA-approved, and professionally installed.
Choosing Between Gas vs Electric Lanterns
Gas lighting has not been popular for either indoor or outdoor use since the 1900’s, but vintage gas fittings are still installed in some historic homes. When it comes to renovations, some homeowners who want to preserve historical accuracy are wondering whether they should restore the old traditional gas lanterns along with other updates. While there are ways to use gas powered appliances in the home, it is risky.
The problem with indoor gas lights
Gas fittings can be configured to produce an open flame or use a gas jacket that uses a cloth or wire mesh bag filled with rare earth metal salts that burn when the jacket is heated. Unlike the open flame, which produces a soft, flickering light equivalent to a 25 watt incandescent bulb, the gas mantle provides an even white light equivalent to a 50 or 60 watt incandescent bulb.
The problem with using gas fittings indoors is that they can generate excessive heat that can ignite combustible materials like wallboard, wood, and fabric, especially if the lights are placed too close to them. Lanterns are designed to vent gas from vents at the top and bottom at temperatures around 450 to 500 degrees F.
In addition, gas lamps emit carbon monoxide (CPO), which can be fatal if absorbed into the blood. The fumes a lantern can produce are the same fumes that a moving car would emit in a closed garage. CPO is both odorless and colorless, meaning it can potentially kill you without you realizing the danger.
These dangers are somewhat reduced with gas mantle lamps compared to open flame models. Similarly, fittings made for propane or converted to bottled gas are slightly safer as this product will burn and produce carbon dioxide and water vapor which is not a hazard. However, as with open flame models, propane torches emit dangerous methane gas. When you combine this information with the fact that lighting in modern homes has historically been used for long periods of time, even propane lights that use gas jackets are not a recommended solution in the home. Given that modern homes and other buildings used to be better insulated, gas lamps are both a fire and health hazard.
Additional problems when installing gas lanterns indoors
Surprisingly, some lantern manufacturers claim that indoor gas fittings are acceptable as long as they are properly ventilated, have electronic ignition, are CSA approved, and are professionally installed. Although gas lanterns meet ANSI indoor and outdoor standards set by CSA, a body that sets codes and standards, there are no national standards for indoor gas lights. Most manufacturers do not guarantee indoor installations.
Another problem is that the local authorities have to approve the installation after the pressure test. If the lamp fails the post-installation inspection, you could be wasting time and money and you would be left with an unusable fixture.
Where traditional gas lanterns can be safely installed
Installing gas lanterns indoors is problematic, but using them outdoors poses fewer hazards, even on outdoor porches, entryways and decks, as well as driveways and lawns. Many manufacturers offer brackets and posts for gas lights.
Outdoors, even lanterns with an open flame are safe. Currently, these models are popular because of the romantic ambiance that the flame provides.
Although outdoor gas lanterns pose fewer risks than indoor relationships, building codes require a licensed plumber to install them
Restoration of traditional gas lanterns
Despite the temptation to restore beautiful gas lanterns in historic homes, the best way to preserve the fixture’s appearance is to rewire it for electricity. According to This Old House, here are the steps you should take:
Make sure the device is in good condition to be rewired.
Clean it by removing paint splashes and dirt. By using a cleaner like Simple Green, you can remove dirt while leaving many original finishes intact. For thorough work, you need to disassemble the jig. If the entire fixture has been painted, you should remove all paint, varnish, and lacquer.
If the finish is “spelter,” which is a zinc alloy that looks like brass, you’ll need to completely strip and refinish it. You can tell if the light fixture is gritty by scraping it in an inconspicuous area and seeing if the surface beneath the surface is white or silver.
Freeze the gas valve with a drop of Loctite, then blow compressed air through the gas line to clear it of dirt and burrs before beginning the rewiring.
Rewire the unit, remembering that electrical wires are thicker than gas flows. The pros recommend using 18-gauge wire that you’ve pre-smeared with a dry bar of ivory soap before threading it through the bracket’s narrow arms. (Attaching the wire to 18, which you can snake through first, may help you pull the wire through.) If the wire doesn’t fit, you may need to route it on the outside.
Prepare your refurbished fixture for use by installing LED bulbs that look like gas flames.
The result of your efforts will be a refurbished light that looks like the original, is safe to use and offers a gas-like light.
Alternative ways to complete your lighting renovation
As you prepare to refurbish historic light fixtures, you may find that the original is too deteriorated to restore without investing a great deal of time and money. A pleasant alternative is to purchase reproduction lights from Lantern & Scroll, who offer many electrified versions of traditional gas lanterns to give your home the right period look.
As you browse our many collections you may find just the right lantern in our Charleston and other collections that you can personalize with scrolls, bows and other details. If you want something you don’t see, we will work with you to create a custom piece that’s just right for your home. Any of our lanterns can be used with candelabra based flickering flame bulbs that mimic the look of gas flames.
Contact us today for information on replacing your outdated gas fixtures with safe, modern electric lanterns that are contemporary to your home.
Are gas lanterns more expensive than electric?
Typical Figures for Gas Lamps
Between the amount of fuel they use and the price of that fuel, gas lamps cost more to operate than comparable electric lights. However, they do not cost so much more as to make them impractical.
Choosing Between Gas vs Electric Lanterns
A gas lamp evokes the romantic elegance of bygone times. The industrial era was dirty and fraught with social hardships, but it witnessed the rise of many mechanical marvels. Gas lamps lit the homes and towns of the time, setting new precedents for the way people used lighting in their lives. Today electric light dominates, but gas lamps survive marginally. The machine-embossed patterns of modern lampposts evoke the craftsmanship of days gone by, and the gaslight itself emits a warm and comforting flame that enlivens the dark hours.
opening hours
The cost of running a gas lamp depends on how much fuel it uses, how much money the fuel costs, and how often you run the lamp. Some gas lamps run all the time. Running yours only when it’s dark enough for the flame to be useful will cut your costs by more than half. You can save even more by not leaving the lamp on all night or just a few nights.
gas consumption
Your lamp should have a tag or label that states how much energy it uses in BTUs per hour. You can also call the manufacturer to get this information. Modern courtyard and driveway gas lamps typically use between 1,000 and 10,000 BTUs per hour based on continuous use. Indoor lamps usually consume a little less. However, with such a wide variety of designs available, you may find models that exceed these ranges.
fuel prices
Gas prices make up the other half of the cost equation. Modern gas lamps typically run on natural gas supplied by your local gas company. Natural gas is a common hydrocarbon, or “fossil” fuel, that is extracted and refined into nearly pure methane before being shipped down utility lines to consumers. You can find out gas prices from your local natural gas supplier by simply calling or visiting their website. Gas suppliers typically price natural gas by the Therm, which is 100,000 BTUs.
Typical values for gas lamps
Between the amount of fuel used and the price of that fuel, gas lamps cost more to run than comparable electric lamps. However, they do not cost so much more that they are impractical. At a typical price of 60 cents per therm, a typical 3,500 BTU per hour outdoor gas lamp would use about 300 therms in a year, which would amount to an annual cost of $180 if operated continuously. By limiting your lamp usage, you could run them for a lot less.
At Gas Lanterns & Lights we specialize in gas lanterns and lights. Contact us today to find out how we can help you.
How much propane does a gas lantern use?
Series 1 & 2 natural gas lanterns use 3451 BTUs per hour; series 3 natural gas lanterns use 4854 BTUs per hour. Series 1 & 2 propane gas lanterns use 2800 BTUs per hour; series 3 propane gas lanterns use 4854 BTUs per hour.
Choosing Between Gas vs Electric Lanterns
Series 1 and 2 natural gas lanterns consume 3451 BTUs per hour; Series 3 natural gas lanterns consume 4854 BTUs per hour. Series 1 and 2 propane lanterns consume 2800 BTUs per hour; Series 3 propane lanterns consume 4854 BTUs per hour.
How bright is a gas lantern?
As a rule of thumb, each gas mantle and GasGlow® LED mantle produces the equivalent light output of a 50-watt incandescent electric bulb. As a result, a quad-mantle gas lamp or GasGlow® LED would produce light equivalent to about two 100-watt incandescent bulbs.
Choosing Between Gas vs Electric Lanterns
Considering gas lamps but not sure where to start? Check out our getting started guide! It contains everything you need to know.
Are gas lamps safe?
Yes! American Gas Lamp Works gas and electric lamps use time-tested designs and technologies. Gas lighting actually predates electric lighting by several decades, and the Welsbach mantle lighting system has been used around the world for more than a century. Note that gas lamps get hot and should not be placed where children or animals can touch them.
Where can I see your product brochure?
To download our product brochure, please click here! Downloadable datasheets for each product are also available through the individual product pages.
PERFOMANCE
What types of gas do your lamps use?
Our open flickering flame gas lamps can be fitted for use with Natural Gas (NG) ONLY. Our Welsbach mantle gas lamps can be equipped for operation with natural gas (NG) or liquid propane (LP). Our electric lamps require 120V power.
Can an open flame be used with liquid propane (LP)?
Our open flame gas lamps are only available when powered by natural gas; they are not compatible with liquid propane. The only LPG option is our gas mantle burner, which is similar to what you see in a Coleman camping lantern. It uses mesh sheaths to produce a solid, white light, like an incandescent bulb. Mantle burners are designed to burn 24 hours a day, not flicker like a flame.
How much gas do AGLW lights use when in operation?
The amount of gas your lamps use depends on the type of gas and burner used. For gas usage in various configurations, see our BTUs and Gas Facts page.
How do you turn a gas lamp on and off?
All AGLW gas lamps have a manual ignition valve located in the collar of the lamp just below the burner. To light the lamp, simply turn the valve a quarter turn with a flathead tool (e.g. a screwdriver) and light the burner in the lamp with a long lighter.
We recommend leaving gas lamps on 24 hours a day to reduce component wear and to keep the gas line warm to prevent the build-up of debris or insects that could interfere with proper gas flow.
If using an open burner with natural gas, you can add an electronic ignition system at an additional cost. This requires both natural gas and 110/120V electricity to be connected to each light and you can control the flame with a light switch or timer.
The electronic ignition system can only be obtained in a new lamp from AGLW. For more information about our electronic ignition system, please click here.
How much light do American Gas Lamp Works fixtures produce?
First, please remember that open flame lamps are designed to produce a soft, flickering light that is primarily intended for atmosphere and not illumination. They are perfect for accent lighting and creating a unique environment, but open flame lamps should not be counted as the primary light source.
Gas mantle lamps, GasGlow® LED and electric candelabra pedestal lamps produce bright light and can be a primary source of illumination. As a rule of thumb, each gas bulb and GasGlow® LED helmet will produce the equivalent light output of a 50 watt incandescent bulb. As a result, a four-jacket gas lamp, or GasGlow® LED, would produce light approximately equivalent to two 100-watt incandescent lamps.
Do you offer low voltage electrical assemblies?
All of our candelabra base electrical assemblies require 120V power. Our dual and triple GasGlow® LED assemblies are available with 12V and 24V drivers upon request.
Can wind affect the performance of gas lamps?
American Gas Lamp Works gas lights are designed for normal wind conditions, but both gas mantled and open flame gas lamps can blow out in high winds. Several factors play a role in the susceptibility of certain lights to wind, including the location of the light in a site or building and the wind patterns in your area.
PRODUCTION
How long will it take before I receive my product?
All of our products are made to order. Parts typically ship from our Pennsylvania manufacturing facility within 1-2 weeks from the date of your order, while lamps and posts typically ship within 3-4 weeks. Additional time should be allowed for special orders and large quantities. Please call 724-274-7131 to review our current estimated shipping time.
What are your lamps made of?
Our lamps are custom made from commercial grade sand cast aluminum and heavy gauge copper. Our lamps are built to last for generations. Please visit one of our dealers to experience first-hand the difference between our foundry craftsmanship and series-produced jigs.
Do you make custom products?
Although all of our lamp models are customizable, we do not offer fully customized services.
Can I return a product if I don’t like it or it doesn’t fit?
All AGLW products are custom made specifically for your order. Due to the custom nature of our products, returns are only accepted for product defects.
PRODUCT INFORMATION
My open flame keeps burning out. What should I do?
To reduce the risk of explosions in your open flame natural gas lamp, consider working with a certified on-site gas specialist to make the following adjustments:
1) Make sure the gas valve is 50-75% open. Often times customers/installers will open the valve 100% to achieve the largest flame, however this can create an air pocket between the burner tip and the bottom of the flame which can lead to frequent bursting. In most cases, simply turning back the valve until the bottom of the flame touches the top of the burner will correct this problem.
2) Periodically clean the torch tip by running a piece of dental floss through the cooled slot in the brass shaft. If debris is lodged or stuck in this path, the gas may not flow properly, which can also lead to more frequent blowouts.
3) Consider buying a windscreen. This is a physical accessory that slips over the burner to add an extra layer of protection from extreme winds. It does not obstruct the appearance of the flame and can easily be added to the burner by you or your installer.
What is the difference between incandescent gas lamps and open flame gas lamps?
Gas light bulbs use incandescent light bulbs as the lighting source. Traditionally known as Welsbach incandescent lamps for their inventor, Carl Auer von Welsbach, gas incandescent lamps produce a bright, even white light when heated by a flame. Gas bulbs can be configured as double, triple or quad bulbs depending on bulb size and lighting requirements. Alternatively, open-flame gas lamps emit a softer, flickering glow similar to that of a candle. Open flame gas lights are preferable when you want the ambiance of an old fashioned gas light but don’t need significant light output.
What is GasGlow® LED?
Our GasGlow® LED is designed to accurately mimic the look, color and intensity of a mantle gas burner. It doesn’t use incandescent bulbs but instead has LED technology built right in. It requires 120V power and has a 2 year warranty. Our GasGlow® LED is proprietary technology unique to homeowners who want to preserve the historic look of gas mantle lighting.
More information about our GasGlow® LED can be found here.
What is the difference between GasGlow® LED and electric candelabra based lights?
American Gas Lamp Works developed the GasGlow® LED as an exceptionally efficient but beautiful replacement for gas incandescent lighting. GasGlow® uses the latest LED technology in combination with our standard gas burner components to accurately mimic the light intensity, color and appearance of gas incandescent lighting. Candelabra base electric lights can be configured as two, three or four base lamps and accept all small base (E-12 base) light bulbs. Most small base lamps currently available are electric incandescent lamps, but alternative LED lamps are increasingly available and offer long-lasting, exceptionally efficient performance.
Can I convert an electric lamp to natural gas?
We do not recommend converting an electric light fixture to natural gas. Luminaires manufactured for electrical use are not properly designed or tested to withstand or ventilate the heat generated by natural gas. The materials from which the lamp is made may also be incompatible or unsafe with gas. Natural gas should only be used to fuel lamps originally designed for use with gas.
Are the lights certified by American Gas Lamp Works?
While our full lights do not carry any certifications, the valve used in all of our gas lamps is UL listed.
Are you a real American manufacturer or just an online marketer?
American Gas Lamp Works and its predecessor, Gas-Lite Manufacturing, have been designing and manufacturing natural gas and artificial gas lighting for over fifty years. Our manufacturing facilities are located near Pittsburgh, PA in the small riverfront town of Springdale. Our lamps have been made by skilled casters and craftsmen for generations.
How do you remove soot from lanterns?
Rub the inside glass of the lantern with the newspaper.
Put your hand inside the lantern and rub the glass with the newspaper and ash. Use a circular motion to avoid streaking the glass and to better remove the soot. As you clean, the newspaper will become dirty. Use a new piece of newspaper and continue the process.
Choosing Between Gas vs Electric Lanterns
\u00a9 2022 wikiHow, Inc. All rights reserved . wikiHow, Inc .is the copyright owner of this image under US and international copyright laws.This image is not licensed under the Creative Commons license, which applies to textual content and some other images used on the wikiHow site This image may not be used by any other company without the express written consent of wikiHow, Inc.
<\/p>
<\/p><\/div>“}
How do I keep my outdoor lights clean?
Use a commercial glass cleaner to clean and shine any glass panes, shades or surfaces. Wipe off the removed light bulbs with a damp cloth. Reinsert the bulbs and reassemble the fixture. Wait until the fixture is completely dry to turn the circuit breaker back on.
Choosing Between Gas vs Electric Lanterns
Aids for cleaning painted fittings made of brass, copper or metal:
stepladder
protective gloves
Old flat brush (for dusting)
screwdriver
old towel
Two utility buckets
Hot water
Liquid dish soap
Soft cloth for cleaning (e.g. microfiber)
Optional: Non-abrasive polishing paste or liquid wax (provides additional protection)
glass cleaner
Step 1
Safety Check – Turn off the circuit breaker for all exterior lights. Make sure all interior light switches for exterior lights are off as well.
step 2
Set up a step stool on a level, flat surface near the light.
step 3
put on protective gloves.
step 4
First remove the bulb(s) to make cleaning the inside easier.
step 5
Using an old household brush, brush away any cobwebs, insect debris, and dust.
step 6
Use a screwdriver to remove any decorative balls, grilles, or shields. Set the pieces aside on a soft surface. A folded towel works well.
step 7
Fill two household buckets with hot water. Add liquid dish soap to a bucket and mix to create suds. Note: Be sure to test any cleaner you use on a small, inconspicuous area before proceeding.
step 8
Place the sphere, shield and various removed parts in the bucket filled with soapy water.
step 9
Dampen a soft cloth or sponge with soapy water. Wipe down the non-detachable parts of the mount that are still attached to the wall. Keep water away from electrical outlets. (If you can reach the outlets, temporarily cover them with tape before cleaning.) Rinse with water.
step 10
Remove the ball, shield and parts from the soapy water. Dip these in the second bucket and rinse with clear water. Dry with a towel.
step 11
Add shine by applying a non-abrasive liquid polish or wax paste to all metal surfaces. Car wax works well.
step 12
Use a commercial glass cleaner to clean and shine any glass panel, bezel or surface.
step 13
Wipe the removed bulbs with a damp cloth. Reinstall the bulbs and reassemble the lamp. Wait until the device is completely dry to turn the circuit breaker back on.
Tip: Cobwebs can quickly accumulate in and around lighting fixtures. After cleaning your exterior lights, spray Miss Muffet’s Revenge Spider Control around the perimeter to keep spiders away!
A few don’ts
In order not to damage the protective coating of the metal outdoor lighting:
Do not use chemical-based all-purpose cleaners.
Avoid cleaning products that contain ammonia or alcohol.
Avoid using abrasive cleaners or rough-textured cleaning cloths.
Cleaning of Craftsman, real brass and copper outdoor lighting
Real brass or copper outdoor lighting (unpainted) can tarnish or develop an unsightly patina over time. You can make your own safe, natural brass and copper cleaners from everyday kitchen ingredients. To clean brass or copper fittings, follow steps 1 through 6 above, then see how to clean unpainted brass or copper surfaces below.
lemon and salt
Remove small marks on brass or copper by rubbing the cut edge of a lemon across the surface. For a more robust cleaner, mix equal parts table salt, lemon juice, and non-iodized cornstarch into a paste. Rub the paste onto the surface with a soft, clean cloth. Mix a bucket of warm water with some mild plant-based soap. (Castilian soap works well.) Use the soapy water to clean the surface, then rinse and dry.
baking soda
Baking soda is a natural mineral powder used in cooking. It’s a fantastic, environmentally friendly alternative to harsh commercially available copper and brass cleaners. Mix two teaspoons of baking soda with a little lemon juice to form a paste. Use the paste applied to a soft cloth to polish the surface. For more stubborn stains, simply sprinkle baking soda on a damp cloth and then rub over the tarnished area. You can also sprinkle baking soda on the cut side of a lemon and then grate. Wash off the paste with a mixture of mild vegetable soap and water. Rinse with clear water and dry with a clean towel.
Visit www.askwetandforget.com for more outdoor cleaning tips and DIY projects for your home.
How do you clean the inside of a lantern?
To clean the interior of your roof lantern:
Gently clean the interior glass with a non-abrasive sponge, a reputable glass cleaning product, and warm soapy water. Where possible, dry the roof lantern with a soft micro-fibre cloth for a clear, streak-free finish.
Choosing Between Gas vs Electric Lanterns
We know that with the warming weather and the easing of lockdown measures, many of our customers are wondering how best to clean their roof lanterns. So let us share with you our top tips for cleaning your roof lantern.
Clean the outside of your lantern roof
Cleaning the outside of your roof lantern can be difficult. We recommend using a sturdy ladder and ensuring someone is standing below for added safety. When standing on the ladder and near the roof lantern it is important to watch your footing and never stand or lean on the lantern. Be extra careful and cautious and never attempt to clean your roof lantern if you are in doubt for your safety. If you are concerned about cleaning the exterior of your roof lantern, you can contact a professional cleaning service.
The outer frame
Clean the outer frame with a non-abrasive sponge, glass cleaning products and warm soapy water. Make sure you never use harsh chemicals or abrasives, and try not to apply too much soap as this can get on the glass and interfere with the glass’s self-cleaning properties. If possible, dry the roof lantern with a soft microfiber cloth for a clear, streak-free finish.
We recommend cleaning your roof lantern on an overcast, hazy day, as cleaning the glass on a warm, sunny day generally dries the windows faster and can cause unnecessary streaks.
How to clean the inside of your roof lantern:
As with cleaning the outside, we strongly advise against cleaning the inside of your roof lantern alone. To reach the roof lantern, you must use a sturdy stepladder, so always have someone stand at the bottom of the ladder to be safe.
Move all the furniture that is under the lantern, put a sheet of old material on the floor to avoid possible messes and grab the corners with a feather duster to remove cobwebs.
Gently clean the inner glass with a non-abrasive sponge, a good quality glass cleaner and warm, soapy water. If possible, dry the roof lantern with a soft microfiber cloth for a clear, streak-free finish.
We recommend repeating this process and cleaning the inside of your roof lantern every two to three months to keep it as good as new.
Conservatory roof options in West Sussex and beyond
If your existing polycarbonate or glass roof has become tired and inefficient, it may be possible to replace it with a new energy efficient glass roof or warm tile roof on the existing structure. This method offers the best of both worlds and is particularly popular with homeowners who want to improve the look and thermal efficiency of their home without having to spend too much.
To find out more about the different options, contact us today via our website or call us on 0800 7318761.
Related blog posts:
Why is my house so cold?
2021 home renovation inspiration ideas!
How do I improve the energy efficiency of my home?
TEAMSK – Cleaning a Gas Lantern
See some more details on the topic gas lantern flame tips here:
General Gas Lantern Maintenance | St James Lighting
Follow all the above steps for either your natural or propane gas lantern. • The igniter probe must me free and clear of carbon build up for a flame to be …
Source: www.stjameslighting.com
Date Published: 7/20/2021
View: 8683
Troubleshooting Your Gas Lamps
Helpful gas lamp maintenance and troubleshooting tips to keep your gas lamps performing brightly, beautifully and safely.
Elegant and easy to maintain, the gas lamps offer a unique design element for the outdoor area of your home. On rare occasions, you may need to troubleshoot problems with your gas lanterns to determine if professional maintenance or repairs are needed. While we recommend hiring a local plumber or gas specialist, we’ve put together a few simple tips to keep your gas lights bright and beautiful.
Basic Gaslight Troubleshooting: Where do I start?
gas mantle lamp v. Open flame gas lamp
There are two basic types of gas lamps and lights: gas mantle lamps, which use a special wick to produce light when supplied with gas and ignited, and open flame gas lamps, which operate without a wick and burn gas directly. Fuel and flame are two things that both types of gas lamps need to function properly, and while your gas lamps shouldn’t require much maintenance, small problems that arise can be resolved by looking at these sources first.
fuel
Gas lanterns run on two types of fuel – either natural gas or liquid propane, depending on the style. Parts of the gas lamp can become blocked and cause your lamp not to burn properly. Here’s what you can do if this happens:
Clean the burner tip: If using a gas mantle burner, turn off the gas and remove the gas light mantle. Carefully slide a felt pipe cleaner through each mantle burner tip and air lock ring openings in the burner base at the bottom of the tube to remove soot or debris. Be sure to use a new gas light hood after removing the old one. If using an open flame torch, run a piece of dental floss through the cooled slot in the tip of the brass shaft and rub with a soft cloth to loosen any soot or debris that may have settled or become lodged in that path .
: If using a gas mantle burner, turn off the gas and remove the gas light mantle. Carefully slide a felt pipe cleaner through each mantle burner tip and air lock ring openings in the burner base at the bottom of the tube to remove soot or debris. Be sure to use a new gas light hood after removing the old one. If using an open flame torch, run a piece of dental floss through the cooled slot in the tip of the brass shaft and rub with a soft cloth to loosen any soot or debris that may have settled or become lodged in that path . Check the insect screen: There are insect screens to prevent bugs from getting into your gas lantern. If the screen becomes blocked, there will not be enough oxygen in your gas lamp and the flame will be smothered. Check your insect screen for obstructions and use air to clean it. If it doesn’t come out clean, replace the insect screen.
If you’ve tried these tricks and your gas lamp still won’t burn properly, it’s time to call a professional. You should check the following:
Check for gas line problems: Gas lamps will only work properly if the gas line supplying the fuel is at least 3/8 inch in diameter. If for any reason a smaller gas line must be used, its length must not exceed 8 feet. A licensed plumber can check and correct incorrect gas line measurements.
: Gas lamps will only work properly if the gas line supplying the fuel is at least 3/8 inch in diameter. If for any reason a smaller gas line must be used, its length must not exceed 8 feet. A licensed plumber can check and correct incorrect gas line measurements. Check the gas light regulator: Your gas lamp should have a regulator in the gas line – if you already have one, have it checked by a professional using standardized test equipment. When using natural gas, a water column of 7 inches of gas pressure should be used. When using liquid propane, a water column of 11 inches of gas pressure should be used. If your light does not have a regulator, one should be installed by a professional. Without a regulator, too much fuel can flow to the gas light causing the air/fuel mixture to become too rich.
Fire
An out-of-doors flame can be dangerous, adding to the cost of wasted fuel.
Manual & Electric Ignition: Manual ignition involves lighting your gas lamp using a flat head tool and a long lighter. With electronic ignition, your gas lamp is lit using a light switch or timer, which remotely creates a spark across the gas and ignites the flame. You cannot use a lighter to ignite the flame of the gas lamp if the manual burner or valve is broken and needs to be replaced. If your gas lamp has an electronic ignition module that has stopped working, it is best to have it checked and replaced by a certified electrician.
With our American Gas Lamp Works Limited Warranty, your lamp’s aluminum body and posts are covered for life. The natural gas burner assembly and socket assembly are covered for five years, GasGlow® LED for two years, powder coated finish for one year against chipping and cracking, and copper/brass housing for 90 days. Glass and coats are not covered under warranty.
Frequently asked questions about gas lamp maintenance
Q: My open flame keeps burning out, what can I do?
To reduce the risk of explosions in your natural gas lamp with an open flame, consider working with a local certified gas specialist to make the following adjustments: Ensure the gas valve is 50-75% open. Often times customers/installers will open the valve 100% to achieve the largest flame, but this can create an air pocket between the burner tip and the bottom of the flame which can lead to frequent bursting. In most cases, simply turning back the valve until the bottom of the flame touches the top of the burner will correct this problem. Periodically clean the torch tip by running a piece of dental floss through the cooled slot in the brass shaft. If debris is lodged or stuck in this path, the gas may not flow properly, leading to more frequent blowouts. Consider buying a windbreak. This physical accessory slips over the burner to add an extra layer of protection from extreme winds. It does not obstruct the appearance of the flame and can easily be added to the burner by you or your installer.
Q: How do I clean a gas lantern tip?
If using a gas mantle burner, carefully slide a felt tube cleaner through each mantle burner tip and the air lock ring holes in the burner base at the bottom of the tube to remove soot or debris. If using an open flame torch, run a piece of dental floss through the cooled slot in the tip of the brass shaft and rub with a soft cloth to loosen any soot or debris that may have settled or become lodged in that path .
Q: How do you turn off or unplug a gas lamp to troubleshoot?
All of our gas lamps have a manual ignition valve in the collar of the lamp. The gas flow can be manually controlled at this point with a flat-head tool (such as a screwdriver). To shut off the gas, simply close the valve with a quarter turn of your tool and turn the valve to the 3 o’clock position. To disconnect your gas lamp from your gas main, consult your gas professional to shut off the main supply so that the valve in the lamp can be isolated from the main inside the post, column or wall.
Q: Do I have to change my coat? If yes, how often?
A damaged sheath should be replaced as soon as possible. In addition to replacing damaged shrouds, we recommend that you replace your shrouds at least once a year to ensure your lamp stays bright and economical in use. Visit our gas lamp mantle maintenance page for more information.
Q: How do I clean my open flame gas lamp?
You should clean the burner tip of your open flame gas lamp at least twice a year. To do this, run a piece of dental floss or a wire brush through the cooled slot in the tip to remove any dirt or grime that has settled in the torch tip, then rub over it with a soft cloth.
Q: Who do I contact if my gas lamp problem persists?
If you’ve tried troubleshooting and are still having trouble with your gas light, contact a local plumber, professional gas lighting specialist, or HVAC contractor. If you purchased lamps from American Gas Lamp Works, contact us directly for warranty information.
These tips and tricks are designed to help you care for and troubleshoot problems with your gas lamp. For more issues and questions, see our frequently asked questions. For the quickest solution, it is best to call a local plumber/gas specialist for an appointment. If you have purchased or are interested in any American Gas Lamp Works product, please contact us directly!
Outdoor Gas Lamp Maintenance
lamp maintenance
Tips for the maintenance of gas and electric lamps
For gas lamps
We recommend coordinating the installation or maintenance of gas lamps and plumbing with trained professionals. Please contact your local plumber, gas lighting specialist or HVAC provider to schedule an installation or service appointment.
Professional gas specialists can often be found in retail stores that sell gas products. For example, a stove and grill, fireplace, or pool and patio store that sells gas grills, gas fireplaces, gas logs, gas torches, etc. Often these locations have a service department staffed with certified or experienced gas specialists that you may schedule an installation or service appointment with for your gas lamp.
To find a specialist, please consult a local directory.
Gas mantle lamps:
Gas mantle lamps are robust, durable lights that can last for generations. However, they require minor maintenance, which is best performed by a professional service technician. In general, we recommend the following:
Replace your incandescent mantles at least once a year and at any given time they are no longer fully intact.
Clean the glass and remove dirt twice a year. Removing debris improves airflow around your coats and improves their performance.
Use only authentic, hard, preformed sheaths in your lamp. Hard coats produce more light, last longer, and retain their shape much longer than “soft” coats at very little additional cost.
Blow out the gas lines annually to ensure proper natural gas supply to your lamp.
Open flame gas lamps:
Open Flame lighting is for the discerning homeowner who wants to fill an outdoor environment with the warm, flickering light of an open gas flame. American Gas Lamp Works’ open flame gas lamps add a dramatic ambience to outdoor spaces, entryways and walkways. We recommend the following routine maintenance for your open flame lamp, which is best performed by a professional service technician:
Clean the glass and remove dirt at least twice a year. Removing deposits improves airflow around the burner and improves its performance.
Clean the open flame burner tip at least twice a year. Run a piece of fine dental floss or use a wire brush to remove any dirt or grime that has settled in the burner tip.
Position the gas valve between 50 and 75% open so the bottom of the flame is touching the top of the burner. Opening the valve too far can create an air pocket between the burner tip and the bottom of the flame, causing frequent blowouts.
Adjust the flame by inserting a flat head tool or screwdriver through the valve access hole in the lamp collar. Slowly turn the valve to adjust the height and shape of the flame. Please note: Turning the valve too fast or too far can cause the flame to go out. When the flame goes out, turn the valve to the OFF position and follow the instructions to relight.
For GasGlow® LED and incandescent electric candlestick lamps
We recommend coordinating the installation or maintenance of electric lights with an experienced electrician to ensure reliable service.
Choosing Between Gas vs Electric Lanterns
The choice between gas and electric lanterns
Gas vs. electric lanterns
Are you looking for a beautiful copper lantern for the outside of your home? You may be wondering which style will look best in your garden, but an important question is whether you should go for an electric lantern or a gas lantern. Lantern & Scroll offer both gas and electric fittings so you can have the look you want no matter the fuel. Here are some important considerations when considering gas and electric lanterns
Shop now: lanternenandscroll.com
Advantages of Electric Lanterns
Electric outdoor lanterns are widely used and have several advantages over gas lanterns.
to complain
Outdoor electric lanterns provide curb appeal. Choose from pole mount, pendant, wall mount or yoke mount outdoor lights to best complement your home’s exterior style and add curb appeal.
Hardwired
If your garden has electricity, installing electric lanterns is an easy way to light up the garden. Hardwired electric lanterns can even be set on a timer so your garden lights come on depending on the time of day or using a light sensor for dusk-to-dawn lighting.
Long lasting
By using LED, incandescent or fluorescent lamps, you can get the desired amount of light. The bulbs are long-lasting, especially if you opt for the more expensive LED models; You just have to replace them every few years and discard the old ones when they burn out.
security
Electric lanterns are quiet in operation and safe around children and pets as they do not generate heat. Using light and motion sensors, your new electric lanterns can serve as your first line of defense for your home security.
Economically
By using sensors and hardwiring your electric lanterns, you can reduce the cost of running your garden lights.
Benefits of Gas Lanterns
Outdoor gas lanterns are a great choice for many homeowners.
The fascinating attraction of gas lanterns
Some people prefer the flickering light of a gas flame, which can reflect off surfaces such as glass windows and patio doors, ponds, pools, and lawns, making gas lanterns an attractive choice. Once installed, a gas light produces a stronger, more intense light, but these lanterns are highly regarded for the soft ambient light they project. Because the flame flickers, it may not provide enough light in the area where you need it. You may need extra light.
Although they are very popular, they do offer some things worth noting.
Installation costs for gas lighting
In the absence of a nearby gas line, installing a line can cost $1,000 or more per line. Installing a gas line is not a DIY project and should be performed by a licensed professional per National Fuel Gas Code ANSIZZ233.1. . The installer must use 1/4 inch copper tubing that is either tinned internally or treated against sulfur corrosion.
Operating costs of a gas lantern
In addition to the installation costs, gas lanterns cost an average of $10 per month to run, but can cost three times that depending on gas prices in the area. The flame always burns unless you extinguish it. If you have a manual igniter, you will need to re-ignite the flame with a match. Gas appliances with electronic ignition can be turned on with a switch.
Dying Flames
The flame can be extinguished by a gust of wind or a draft. You can protect the light with an optional windscreen, but blocking the vents at the bottom of your lantern with pennies or anything else is not recommended as excessive heat can build up inside the device. The wind chimney provides additional protection at the top of the burner to further block any wind entering the lantern.
Well-ventilated location
Because gas lanterns are noisy in operation, give off a lot of heat, and can emit carbon monoxide, they should only be used in areas that are kept away from children and pets and in well-ventilated areas. They are best suited for operation outdoors or in semi-enclosed areas such as outdoor kitchens, porches, porches or patios.
Depending on local regulations, some models can be used indoors if they have electronic ignition or C.S.A. Certified to ANSI Standard Z21.42 for indoor and outdoor use. However, Lantern & Scroll recommends that you place your gas lanterns outdoors. If you want the look of a gas flame indoors, a flame simulation feature is available.
Fuel Flexibility with Lantern & Scroll
If your home has gas lines nearby, you have a choice of what type of lantern to choose. Since Lantern & Scroll offers many versions with gas or electric operation, you can even plan your outdoor light for both fuels.
While you can choose a natural gas or propane pole/pillar lantern from our Charleston, Georgetown Cities or Yacht Basin collections, you can add additional exterior and interior lanterns that are electrically matched.
Regardless of the fuel chosen, copper is an excellent material for outdoor lanterns. Our lights are made from 20 and 32 ounce copper which ensures long lasting durability. Unlike lamps made of nickel, aluminum or composite materials, which last three or four years before the weather destroys them, real copper and brass lanterns only become more beautiful with age. Instead of rusting, copper develops a patina that gives it the appearance of antique bronze. What the product looks like depends on your climate. While copper in coastal regions can develop a greenish hue within a few years, elsewhere it may not do so for decades. Most copper will turn to “patina” in about three years.
Why choose modern pole lights
Modern pole lights and lanterns that run on any fuel add to the safety and attractiveness of your property. You might want a post or column lantern in your garden to light up your driveway or sidewalk leading to your home, or even to light up your entryway for yourself or a guest. Lighting looks great attached to a fence, retaining wall or other permanent structure, or mounted to your siding over flower beds or near yard water features. Pole lanterns allow you to enjoy your deck or patio late into the night. Light from a gas or electric lantern can illuminate the area. Should you choose gas or electric?
To see our collections of gas and electric lanterns, view our collections online. Give us a call or visit our Charlotte showroom for help choosing the best lanterns for you.
Related searches to gas lantern flame tips
Information related to the topic gas lantern flame tips
Here are the search results of the thread gas lantern flame tips from Bing. You can read more if you want.
You have just come across an article on the topic gas lantern flame tips. If you found this article useful, please share it. Thank you very much.
