Are you looking for an answer to the topic “gsi soft close toilet seat“? We answer all your questions at the website Chewathai27.com/ppa in category: Top 867 tips update new. You will find the answer right below.
Table of Contents
Do soft close toilet seats fit all toilets?
No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying.
Why do soft close toilet seats stop working?
Soft-close toilet seats have hinge dampers that help control the speed at which your seat closes. If your slow-closing toilet seat is slamming shut, chances are these dampers need tightening.
What is the best soft closing toilet seat?
| # | Product | Score |
|---|---|---|
| 1 | KOHLER K-4636-0 Cachet Quiet Close… | 9.35 |
| 2 | Delta Faucet Wycliffe Slow Close… | 8.00 |
| 3 | MAYFAIR 880SLOW 000 Caswell Toilet… | 9.45 |
| 4 | Elongated Soft Close Toilet Seat… | 9.75 |
How do you fix a soft close toilet seat cover?
Rotate the dampers towards the back of the seat to make it close more slowly. Spin each hinge damper towards the back of the seat, ensuring that you align the shape of the dampers with the shape of the holes that they slide into. This will slow down the seat’s hinges so they close it more softly and quietly.
Slow Close Toilet Seats: Slow Close Lid & Seat Advice and Troubleshooting
How do you tighten a toilet seat with no access underside?
In these situations, you can hold the nut in place with a pair of pliers while using the screwdriver to tighten the bolts. The wing located on the nut will prevent the bolt from turning back on itself by locking it in place. Again, keep tightening the bolt until the seat feels secure.
Slow Close Toilet Seats: Slow Close Lid & Seat Advice and Troubleshooting
If you need guidance, read on for our guide.
Can you learn how to tighten the toilet seat without access to the underside?
You absolutely can! You may feel better knowing that tightening the toilet seat without an access base is not difficult, although the screws may not be in an intuitive place. Often many toilet seats have small holes for access from the bottom that have just been hidden from your view.
There are other types of toilet seats that may have slightly different holes and fittings, but with a little guidance you can certainly figure those out too!
Before we get to our step by step guide on how to put on the no access bottom toilet set, let’s consider what types of tools are required for this project.
Read on for valuable information!
Is there a tool to tighten toilet seats?
Luckily, you don’t need any special tools to tighten toilet seats. In fact, you may already have them around the house or in the garage.
To create your own toilet seat fastener kit, get an adjustable wrench or socket, a flat head screwdriver and pliers as that should be all you need to tighten these toilet seat hardware.
And while it’s not necessary, you can consider wearing protective gear like gloves and goggles so your hands and eyes don’t encounter any fragments of anything coming off your toilet in the process.
How do you attach a toilet seat with concealed hardware?
Step 1: Check the toilet again
Since most regular toilets have holes somewhere for access from below, the first thing you should do again is to look for them around your toilet. A common place to look is on the seat hinges, where there may be hidden buttons you can press to dislodge the lid and reveal the mounting studs and screws.
In some cases, there are toilet seats with special covers that you may have to slide to the side or simply pry up to access the fittings below. These covers protect the mounting bolts from anything that could damage the locks. In this situation, carefully look for a round-cut piece to locate the covers.
The instructions above work well for most floor-installed toilets, but if yours is in-wall installed, you may need to remove the toilet from its mounting base. The holes for tightening your wobbly toilet seat should be on the screws that attach the toilet to the wall.
Step 2: Readjust the seat
Now that you’ve found the bottom access to the toilet seat screws, you can adjust the seat before tightening everything back up. If you find that your seat is out of alignment, you probably want to true it. You can use clamps to hold it in place.
Step 3: Tighten the screws
Once you have the toilet seat centered, you can start tightening the screws. A flathead screwdriver would be best here, but if you find that a different screwdriver head works better, go for it as you don’t want to damage the screws and shorten their lifespan. Tighten the screw until it can no longer be screwed in.
In the lower entrance of some toilets, e.g. B. Soft close toilets, a special wing nut can be adjusted to get a more secure fit for your toilet seat. In these situations, you can use pliers to hold the nut while you use the screwdriver to tighten the screws. The wing on the nut prevents the bolt from turning back on itself by locking it in place. Re-tighten the screw until the fit feels secure.
Step 4: Check the tension
By now your toilet seat should be secure again. But before you pack your tools, check the tension by banging on the screws to see if anything moves. If this is the case, retighten the screws as much as possible. When everything seems secure, close the lid, making sure nothing is preventing it from closing properly. Then you are done!
How do I stop my toilet seat from moving sideways?
As an additional accessory you only need two adhesive disks. First, locate the screws that attach the toilet seat to the bowl. Then use your flathead screwdriver to hold the screw in place while you remove the nut underneath.
If it’s just a plastic nut, you can probably remove it by hand, but if it’s particularly tight or metal, use your pliers to twist it. Now remove the lid, clean the ceramic thoroughly and put the seat back in place. Put the screws back in the holes and then take your washers.
Peel off the pad and then slide each screw down until it reaches the bowl. Finally, simply tighten the nut as tight as you can, which will secure the bolt and prevent the seat from slipping.
How do you fix a toilet seat that keeps falling off?
The most common reason a toilet seat keeps falling off is that the seat was placed too far back on the tank. All you have to do is unscrew the seat, pull it forward as far as you can, then tighten securely.
Which is better toilet seat wood or plastic?
Because of the enamel coating, enamel wood toilet seats are not as prone to warping, cracking, or getting scratches compared with wood veneer. Also, because it’s heavier, wood enamel toilet seats tend to have more durable hardware, compared with the plastic pieces found on plastic seats.
Slow Close Toilet Seats: Slow Close Lid & Seat Advice and Troubleshooting
Choosing a wooden or plastic toilet seat is primarily a matter of personal preference. Wooden toilet seats stay warmer and are more comfortable, but can be difficult to clean. Plastic toilet seats are easier to keep clean and more versatile, but they can be uncomfortable, especially in winter.
For a deeper look into the pros and cons of wooden and plastic toilet seats, check out the next section below. We will also highlight the pros and cons of using enamelled wood toilet seats, which combine some of the benefits of regular wood and plastic toilet seats.
Wood vs. plastic toilet seats
Before we start, we need some clarification, there are two different types of wooden toilet seats: enameled wood and wood veneer.
Enameled wood is wood that has been painted with enamel. This makes it appear like plastic and gives it a smooth finish.
Wood veneer is what you probably think of when you think of a wood seat. They are made from strips of wood molded around a wooden core so you can see the natural grain.
In this section we will compare wood veneer seats to plastic toilet seats. And in the next section, we will do a similar comparison for enameled wood toilet seats.
1. Comfort
If you’ve ever sat on a plastic toilet seat in the dead of winter, you know how shocking it can be. Plastic toilet seats don’t retain heat, so when it’s cold, the toilet seat can get REALLY cold.
On the other hand, wood traps some of its own heat. This makes your toilet feel significantly warmer compared to its plastic counterparts.
If you live in a home that gets quite cold in the winter, consider a wood veneer seat for added comfort.
2. Hygiene
Because wood is a porous material, it can be difficult to clean. The wood can trap some of the things it comes in contact with, like urine, and hold the odor if it’s a frequent occurrence.
However, plastic is a smooth surface, which makes it very easy to clean and disinfect.
If you have young children at home who are having trouble aiming, you should probably consider a plastic or wood-enamel seat.
3rd style
A large part of the choice between a plastic toilet seat and a wooden toilet seat comes down to personal preference and style.
Wooden toilet seats give a warmer, more welcoming feel. And goes well with rustic furnishings.
Plastic toilet seats give a sleeker, more modern look.
It’s up to you to decide which one you prefer.
4. Durability
Well, while you might think that wooden seats are more durable than plastic, it’s actually the other way around.
Wood seats are heavier and have a higher compressive strength, but can warp and crack in high heat or humidity. Due to the increased weight, they are often mounted with metal hinges, which are more durable than the alternatives.
Plastic is not prone to cracking or warping, but the smaller plastic parts, such as B. the hinges break more easily.
If you live in a high humidity area, you’ll probably want to stick with a plastic seat to replace your toilet seat less often.
5. Versatility
Plastic seats come in a wider variety of styles and shapes than wood seats. If you have an awkwardly sized or shaped toilet, or want to make sure you can easily get a soft close option, plastic is the type of seat for you.
If you want a toilet seat that closes gently (to avoid the loud bang of a falling toilet seat), you should get a plastic toilet seat.
Wooden seats are much heavier than plastic seats, making it harder and more expensive to have the soft close option.
6th prize
When it comes to price, wood veneer toilet seats tend to be on the expensive side of the spectrum.
A lot of what you pay for when you buy a wood veneer seat is the look and aesthetics of the seat.
If you’re trying to stick to the cheaper end to replace your toilet seat, then plastic is for you.
Enamelled Wood Vs. Plastic Toilet Seats
Enameled wood is a great option when it comes to toilet seats.
I personally use an enameled wood toilet seat and I really like it. It gives you the benefits of a plastic seat but with a few extra features that you might enjoy.
1. Comfort and style
When it comes to comfort and style, enameled wood toilet seats combine many of the advantages of plastic and wood veneer toilet seats.
Enamelled wood toilet seats tend to retain more heat than plastic toilet seats, making them warmer to the touch in colder weather.
Additionally, enameled wood toilet seats can feel more premium and homely because they are heavier. Really light plastic toilet seats, on the other hand, can sometimes feel cheap.
Finally, enameled wood toilet seats are usually white and therefore blend in well with more modern interiors (compared to wood veneer seats).
2. Weight
Because enameled wood seats have a wood core, they have a lot of extra weight. In fact, when you compare toilet seats in the shop, this may be the only noticeable difference between a plastic and an enamelled wooden toilet seat.
Weight can be both good and bad. It’s good because it can make the seat more durable and feel more premium. It’s bad because the seat can hit the bowl hard, making quite a noise (or possibly even causing damage).
Side note: if you were having trouble with your toilet seat falling off all the time, this post might help you fix the problem.
3. Hygiene
Because enamelled wood is coated with enamel, it has a smooth, non-porous surface. This makes it just as easy to care for as plastic.
If you have had the same seat for a long time, be sure to check the seat for cracks or wear in the paint. When the wood core is exposed, it can begin to trap germs and even rot if the damage is not contained and repaired.
Tooth enamel won’t crack or break easily, however, so don’t worry about that too much.
4. Durability
Because of the enamel coating, enamel wood toilet seats are not as prone to warping, cracking, or scratching as compared to wood veneers.
Because they are heavier, wood enamel toilet seats tend to have more durable hardware compared to the plastic parts found on plastic seats.
When it comes to durability, you get the best of both worlds with enamelled wood toilet seats.
5. Versatility
When it comes to versatility, wood enamel is just as versatile as plastic.
It comes in a variety of shapes and sizes.
You can also get the soft-close option with an enameled wood seat, but they’re a bit more expensive.
6th prize
Wood enamel seats come in a variety of price points, some about the same as plastic seats and some much more expensive.
The price range depends on the quality of the seat and if you want a soft-closing toilet seat.
However, a soft-close wood-enamel seat is about as expensive as a regular wood-veneer seat.
related questions
Are wooden toilet seats hygienic?
Enamelled wood is just as easy to clean and disinfect as plastic. However, wood veneer is also hygienic but requires more cleaning than plastic. As wood veneer ages, it can also trap and hold bathroom germs and odors.
Do plastic toilet seats discolour?
Plastic toilet seats can get urine stains. However, the urine needs to stay on the seat for some time to leave a stain. If you clean your toilet seat regularly, stains shouldn’t be a problem.
How often should you replace a toilet seat?
Q. Why should I replace my toilet seat? While a toilet typically lasts at least 15 years, toilet seats last only about 5 to 7 years before they begin to crack or become stained to the point that, no matter how hard you scrub, they no longer appear clean. That’s when it’s time to consider replacement.
Slow Close Toilet Seats: Slow Close Lid & Seat Advice and Troubleshooting
Before removing a toilet seat
Protect yourself from germs and bacteria by cleaning the toilet seat and the surrounding rim well before removing it. Once it’s clean you can proceed to remove the seat by finding the two screws holding it to the bowl. They are often hidden by plastic covers. Open the covers and locate the nuts on the bottom of the bowl. These nuts are usually plastic and can be removed by hand. If the hardware is metal, use an adjustable wrench or socket wrench to remove it.
Measure your toilet seat
Because toilets come in three different shapes – oblong, compact, oblong, and round – you’ll need to measure the bowl to ensure you’re buying the right toilet seat. First measure the distance between the two screws on the back of the seat. Standard width is 5-1/2 inches but may vary with specific toilets. Next, measure the width of the seat at its widest point. Finally, measure the length of the seat at its longest point (from the midpoint between the two screws to the outermost lip).
advertisement
If you have a standard toilet, a round bowl should be 16-1/2 inches long, while oblong bowls are about 18 inches long. A compact elongated seat falls somewhere in the middle. Once you have the measurements, you can look for the correct seat size.
If you don’t want to measure and don’t get a few crooked looks, you can also take the old seat to the hardware store to find a suitable replacement. Just make sure you clean it first.
Choose a new toilet seat
While toilet seat design is certainly not cutting edge, it has seen a spate of innovation in recent years. So if you’re planning on replacing a toilet seat, especially if it’s been a while since you last browsed the selection at your local hardware store, keep an eye out for these key features:
Quiet closing: Gone are the days of slamming toilet seats. You can now choose a product with hinges that gently lower the seat.
Molded Bumpers: The simple, no-nonsense benefit of molded-in-place bumpers? They prevent the seat from damaging the toilet, add stability to the seat and reduce noise when the toilet lid is closed.
Colors: Toilet seats now come in dozens of colors. One manufacturer, Bemis, offers a color picker tool to help homeowners navigate the array of options available.
Cleaning: The better the seat, the easier it is to remove for cleaning. Look for a product that can only be detached with a screwdriver. There are also quick-release seats that allow for easy, tool-less removal so you can clean the seat and the area around the hinges.
Durability: Choose a toilet seat with stainless steel or galvanized hinge posts that will not break or corrode as they will hold the toilet seat in place. Plastic seats are the most common. Although wood is more convenient, plastic is more durable and easier to clean.
advertisement
Versatility: For children, there are “trainer” models with built-in removable potty seats; For seniors, some toilet seat models have side arms with non-slip handles.
Comfort: If you cringe at the thought of sitting on an ice-cold toilet seat in winter, consider upgrading your toilet seat to a heated model.
safety aspects
There are no significant safety risks associated with replacing a toilet seat; However, as mentioned above, it is a good idea to give the toilet a thorough cleaning before starting work. Consider wearing nitrile gloves to protect your hands from germs and bacteria.
Tips for removing a toilet seat
Most of the time, removing an old toilet seat is a simple, if occasionally physically cumbersome, task of holding the bolt in place while you turn the nut underneath. However, if your existing toilet seat is attached to the bowl with metal hardware, bathroom humidity may have corroded the hinges, making the nuts difficult to remove. If this is the case, spray each nut with penetrating oil such as WD-40, then wait 10 minutes and try again.
If the threads on the bolt are badly corroded, no amount of penetrating oil will work. In this situation, get the big guns out by drilling a hole in the bolt with a drill. Start with a 1/16″ bit and work your way up to progressively larger bits. Next, grab your socket wrench or adjustable wrench and turn the nut until the bolt breaks off. Use this method at your own risk as applying too much lateral force to the screw could potentially damage the shell.
Given the location of the screws on the back of the bowl, getting a wrench in position to work on a toilet seat’s hardware can be cumbersome, to say the least. Use a socket wrench with a deep socket that can cover the long bolt while still reaching the nut. The socket wrench does not slip off the nut, while the length of the long bolt and the angle of the wrench handle allow you to turn the nut more easily.
advertisement
To recap, here’s how to remove an old toilet seat:
Use penetrating oil to loosen corroded nuts.
Use a deep socket wrench to get a better grip on the nut.
Break off badly corroded screws by drilling into them.
Once you have successfully removed the old toilet seat, proceed to install the new one.
Installing a new toilet seat
Different toilet seats require slightly different installation methods. Consult the manufacturer’s instructions to understand the quirks and quirks of your chosen product.
One thing is for sure: today’s toilet seats are so easy to assemble that removing the old one is probably the most difficult step in the process.
Few tools are required as in most cases it is just nuts and bolts. First slide the screws through the corresponding holes in the bowl. Then use an adjustable wrench to apply torque to the nut located under the bowl. The larger or more elongated the nut, the easier your job will be. Some toilet seat replacement kits may require the use of a tool specifically designed for tight spaces.
Will these new, easy-to-install toilet seat designs prove their durability over time? We’ll find out.
Frequently asked questions about replacing a toilet seat
If you’re wondering how often you should replace a toilet seat or how difficult the job is, read on for more information.
Q. Is it easy to replace a toilet seat?
Replacing a toilet seat is one of the easier home improvement tasks you can take on. Many newer toilets and toilet seats are secured with finger-tight plastic screws that will not corrode and require no tools for installation.
Q. How long does it take to replace a toilet seat?
Unless you encounter stubborn nuts and bolts, the toilet seat installation should take no more than 15 minutes.
advertisement
Q. Why should I replace my toilet seat?
While a toilet typically lasts at least 15 years, toilet seats only last about 5 to 7 years before cracking or becoming so stained that they no longer appear clean, no matter how hard you scrub. Then it’s time to start thinking about a replacement.
Q. When should I change my toilet seat?
Although toilet seats don’t have an expiration date, it’s a good idea to replace one if it’s cracked or stained, if the screws are badly corroded, or if they’re so worn that the toilet shifts slightly from left to right when you sit on it.
Gsi seat cover: ‘quick-release’ \u0026 ‘soft-close’ features
See some more details on the topic gsi soft close toilet seat here:
Sanitary ware and bathroom furniture made in italy
Designing the bathroom environment means weaving relationships between intimacy, silence, the intrinsic value of a place and shapes, materials, lights and colors. In an infinite number of possible combinations. To make these forms of expression unique, GSI has enriched its product family with color elements. Seductively physical and with a distinctive character, our new matte finishes are designed to accompany supported washbasins as well as semi-inset washbasins. Select pairs of wall-hung toilets/bidets feature the special “Dual Glaze” finish, which combines an opaque glaze on the exterior of the sanitary fitting with a glossy Extraglaze® glaze on the hydraulic parts that come in contact with the water. An exclusive feature that ensures maximum hygiene.
DIY Basics: How to Replace a Toilet Seat
How to replace a toilet seat
Installing or replacing a toilet seat is a fairly simple task. Whether you are replacing your toilet seat because it is old or damaged, or you want a new style; All you need are some basic tools.
Installing a toilet seat is often one of the easier and quicker DIY jobs to do in your bathroom and can be completed in minutes.
Read on for our full guide explaining the steps of the process…
Why should I replace my toilet seat?
Toilet seats can be replaced for a number of reasons. These may include the seat being broken or cracked, the fasteners may have disappeared causing it to wobble and move when you sit on it, or you want a new style.
Read more: Update your bathroom on a budget
If you’ve had a new bathroom installed the seat will likely be made for you, but if not this is another reason to install a seat in your loo.
Do all toilet seats fit the same?
No, not all toilet seats fit the same as toilets come in different shapes so you need to check yours before buying.
Read more: What types of toilets are there? Buying advice for toilets
There are three types of toilet shapes commonly found in UK homes. These are round, D-shaped and square seats. Another popular feature is a soft-close seat. So if you prefer this, you need to measure correctly to ensure this type of seat fits your toilet.
Replacement toilet seats can usually be fitted to older or non-standard toilets. However, the seat must be supported at the contact points or hinges.
Most toilet seats are oval in shape, although some have a more contemporary square or D-shape. So it’s important to keep this in mind when looking for a replacement in a store or from the original manufacturer.
Before you buy a seat, there is something important to do…
How to measure a toilet seat
This is arguably the most important part of replacing your toilet seat – you don’t want to buy one that doesn’t fit.
Are toilet seats a standard size?
No, due to different toilet styles, there is no standard size for all toilet seats. To find the best seat for your toilet, you need to measure your toilet. Read how to do this below.
There are important measurements you need, although most seats are adjustable to accommodate most common toilet bowl shapes. The measurements are:
The distance between the mounting holes – where the screws are located. This is often a standard 155mm measurement, but it’s worth checking
The width of the toilet bowl at its widest point
The length from the front of the shell back to the two seat mounting holes
With these measurements you can be sure that you are buying the right size toilet seat.
Do I need to take any safety precautions before changing my toilet seat?
Toilets are an obvious place for harmful germs to grow and can be a source of potential infection, so you should take precautions before you begin.
Always wear rubber cleaning gloves when changing a toilet seat. Ideally, clean it before removing it. After removing the seat, thoroughly clean your entire toilet. Use an antibacterial spray that you can buy at most stores.
Use an antibacterial hand wash after replacing your toilet seat to ensure you’ve removed any harmful bacteria.
What tools do I need to change a toilet seat?
You’ll need pliers or an adjustable wrench to remove the nuts that attach the seat to the toilet—these are often wing nuts.
You may also need a flathead screwdriver to remove any plastic caps covering the nuts. Most of these tools can be found in a garden shed or bought for little money at most stores.
Depending on the seat you buy, it may come with a kit to attach it. If you’re just replacing the hardware like the nuts and not the whole seat, you’ll probably have to buy the parts yourself.
Some newer toilets may not have traditional screw-on seats, but instead have a push-in seat. So it’s best to check before you buy a replacement.
How to remove an old toilet seat
Most toilet seats attach to the toilet with hardware. These are held together by two bolts, usually hidden behind plastic caps on the back of the seat.
You may have to crouch or stand on the ground to access it properly.
If there are plastic caps over the nuts, use your flat head screwdriver to remove them. This can be more difficult with older seats if they have been there for a long time. Working your way around the cap, without being too rough to damage the toilet itself, carefully remove the caps.
Once you remove the caps you will see the top of the screws with wing nuts holding your seat in place. These nuts are often made of plastic, but can also be made of metal – depending on the age of the seat. Use your pliers to loosen the nuts, then remove them by hand.
The seat should then lift off, but depending on the brand you may need to unscrew it with your screwdriver. If it’s stiff or too rusted to lift off on its own, spray some WD-40 to lubricate it and wait up to 10 minutes before lifting the seat off.
If they’re still stuck, you may need to carefully saw them off with a small hacksaw.
Some toilet seats vary in how they are held in place, but most work in a similar way. If your seat is different, take a look at the hardware and you should be able to figure out how to remove it.
It can be difficult and not the most pleasant work, but it shouldn’t take long. Just remember the process for next time.
As mentioned above, after removing your old toilet seat, give the entire toilet a thorough cleaning with antibacterial spray.
How to install a new toilet seat
Once you’ve removed your old seat, it’s time to install the new one. With the new seat you will receive hardware, including manufacturer’s instructions for installation.
Essentially, installing a new toilet seat is the reverse of the removal process.
First, line up and attach the new fittings – by inserting the screws through the toilet’s mounting holes. Make sure your seat sits evenly on the perimeter of your toilet bowl and center it. Use your hands or pliers to secure the wing nuts once you are happy with the position of the seat.
Be careful not to over tighten them as you may want to adjust them once the new toilet seat is in place. Additionally, plastic bolts – if they are – don’t need to punish much before either yielding or breaking.
You can also have rubber washers that you can place between the nut and the toilet to act as a cushion.
You will do this on both sides of the seat as there are two bolts so two wing nuts that need to be tightened altogether.
If plastic caps were included with the new toilet seat, snap them into place by pressing down on the screws onto the wing nuts.
By following these steps you should be able to replace your toilet seat quickly and easily.
toilet seat designs
No matter the size or style of your bathroom, you’re guaranteed to find the right toilet seat for your home. Available in a variety of shapes and sizes and a range of colours, from classic white to bright pink to a seat with a beautiful animal design, there is a toilet seat for every taste.
Olli Lyon
Ollie is a self-trained handyman who has a particular love for kitchen and bathroom renovations. In his free time, Ollie enjoys biking and hiking.
We love seeing your bathroom makeovers and sharing them on our Instagram page – if you’ve had a Plumbworld makeover, tag us in your photos to be featured!
We’d love to know, so why not share your favorite designs with us on social media?
Find us at:
Facebook | Twitter | Instagram | Tiktok | pin rest
Alternatively, sign up for our newsletter to receive the latest offers, latest product launches and advice.
Are you planning a new bathroom or kitchen? Shop online at Plumbworld for guaranteed lowest prices and next day delivery.
Don’t forget to read the rest of our blog for more bathroom and kitchen tips.
Slow Close Toilet Seats: Slow Close Lid & Seat Advice and Troubleshooting
You can solve more problems than you think by installing or attaching a slow-moving or self-closing toilet seat.
These seats, with their ingenious toilet seat hinges, will probably be in every bathroom one day.
If you haven’t upgraded yet, read some reasons they can make bathroom life easier (not to mention smoother and quieter).
What is a slow closing toilet seat?
A slow-closing toilet seat is basically one that closes on its own once you start pushing it down.
Gravity controls it, but special, tensioned hinges control gravity. This is where the slow part comes in to keep it from hitting.
A light touch is enough to set the seat on its way to closing. After a few seconds, the seat and/or lid land on the floor like a small spring.
It’s whisper quiet. Equipped with special toilet seat hinges, these toilet seats lower very slowly and make virtually no noise when they come into their closed position.
5 Great Reasons to Use a Slow Closing Toilet Seat Hinge 1. No more slamming! The benefits of a slow-closing toilet seat are numerous. Of course, the biggest thing is that you’ll never have to pop down a seat again with a soft-close toilet seat. Children or inattentive adults can let go of the seat without the consequences of a loud noise when the seat hits the stool. This not only relieves waking up, but also helps those who are sleeping, such as in the middle of the night. 2. Safer with small children around Also, a seat that can’t slam is safer. This is especially true for the little ones with tiny hands and fingers, not to mention a pet that loves to drink from the bowl! 3. Keep things cleaner Slow-closing toilet seats are also more hygienic. That’s because the seat requires a little less touching and handling to close it. That means fewer just “dirty” hands gripping the lid; But even better, many models come with removable toilet seat hinges. Sometimes referred to as “lift-off” toilet seat hinges, this design allows you easier cleaning around the toilet seat hinge area. We all know how difficult this is! 4. Helps Close Your Toilet Lid Believe it or not, consumers say family members are more likely to close the lid after installing a slow-closing toilet seat. Maybe it’s because it’s just easier and more convenient? It’s actually less work. Or maybe because it’s just so cool in concept. Anyone who has dealt with standard seats for years loves the novelty of a slow-closing seat. The coolness factor alone could end a lot of marital strife too! 5. Better Quality Seats In addition, the hinges are not your ordinary toilet seat hinges, apart from the ability to slowly close your toilet seat. Most of these products are built a little better than your average toilet seat. In other words, the hinges are of higher quality, making them more durable and lasting longer. Get a quality model and you can use it for many years. The toilet seat hinges themselves are designed not to loosen even after being tightened – a sure sign of an inferior toilet seat; Hinges that move the seat. Sound familiar?
Problems with slow closing toilet seats
As with any mechanical device that is used regularly, parts can wear out, become dirty or even break. There may be times when your fancy self-sealing seat and lid has stopped working or needs an “adjustment”.
Some common complaints about failing or aging seats are:
Loose hinges causing the seat to slide from side to side
Broken hinges causing the seat to drop hard
Cracked seats from perhaps too much pressure
Worn enamel on varnished wooden surfaces
Dirty surfaces that cannot be removed
Bad smells that seem to come from around the seat
How to fix your slow closing toilet seat
In all honesty, all of the above issues are not solely due to slow-closing seats. The fact is that you will find these problems with standard types as well.
This includes anything related to surface wear, odor or permanent stains.
Since the soft-closing style costs more, you obviously expect a longer lifespan.
In fact, when they break, your disappointment makes you want to fix your slow-closing toilet seat instead of simply replacing it.
You can certainly do this, but in many cases you will have to order some new parts. Contacting Mayfair and Bemis directly is the best place to start. Their customer service number is: (888) 722-6488
When it comes to wooden seats, the best solution is actually prevention. Yes, this is the information I hope you have before you install your seat.
Worn, stained or smelly seats
The best rule of thumb when cleaning any surface is to NOT use “bathroom cleaners” of any kind.
These include toilet cleaners, disinfectant wipes or brushes. These will all damage the paintwork over time and the rest is history.
Some medications are known to stain after passing through a person’s system and coming in contact with the seat or lid with urine.
These problems are usually permanent; Therefore, from the very first cleaning, only use a cloth with hot soapy water (e.g. Joy) and rinse with a second, damp cloth.
Slow closing seat not working
In most cases, a slow closing seat that comes down too quickly just needs cleaning. That means from the inside out.
Over time, usage particles can become lodged in and around the moving parts of the hinge.
The repair?
Simply remove the seat and hinges and soak in warm, soapy water for 20 minutes. This will help break up and dissolve debris that is interfering with proper operation.
If you see a visible crack or parts that have come loose from the hinges, then it’s time for a replacement hinge. Simply call the Mayfair/Bemis number above.
If you have another brand, try contacting the manufacturer through their website. Most warranties on these seats last only one year and cover defects only.
Get one of these!
If you buy a slow closing toilet seat, you’ll hear a lot of people say they spent about $50-60 on one. Sounds a bit steep for a seat, lid and some toilet seat hinges, right?
You can get lower quality plastic types for a lot less ie. H. As low as $12 – But the verdict is these just don’t hold up or feel as good. A bit underpowered and with parts that break making for a short lifespan.
Luckily, Amazon offers a few reasonably priced options (ranging from $25 to $33).
They are made by Mayfair and come in traditional and elongated sizes. They are made of wood with a multi-layer enamel finish.
They come with the detachable toilet seat hinge feature, so you can keep these guys a lot cleaner by simply lifting the entire seat off for easier washing.
The Bemis brand also sells these, including soft seat variants. However, user experiences show that the Bemis parts don’t last as long.
Many consumers complain that the hinges break and the seat no longer comes down smoothly. This is interesting because Bemis and Mayfair are essentially the same manufacturer.
For around $30, you can probably afford a slow-closing toilet seat in any of your bathrooms. Not too bad when you consider that not only are you getting a new, high-quality seat, you’re also getting one that’s quiet and won’t pinch your fingers.
And who knows, if you’re having guests over, you’ll have a fun little topic of conversation with those who haven’t seen these cool slow-closing toilet seats.
frequently asked Questions
Can you adjust a self-closing toilet seat?
Some seat hinges are adjustable, some are not; You’ll have to put your DIY hat on and remove the seat to inspect it to find out for sure.
It’s fairly easy to adjust the seat hinges if the seat isn’t level.
If you’re not sure how to proceed, just do this:
Remove the caps to expose the hinge screws. Remove the screws to adjust the hinges and reposition the seat as needed. Attach the toilet seat and lids by pressing down on the hinge pins. Slowly close the seat and lid while aligning them with the front and side of the bowl.
How do you stop a soft close toilet from creaking?
If your slow-closing seat or lid sounds like a prop in a haunted house, it could mean your toilet seat’s hinge mechanism is a bit loose.
Here’s how to streamline things!
Close the toilet lid and remove the screw covers (the little white caps you see above). Locate the nuts holding the bolts in place. Use a pair of pliers to hold it while you tighten the screw with a screwdriver so it’s square and doesn’t creak. Reattach the screw caps. To be on the safe side, spray some silicone lube on the hinges at the back of the toilet seat
Why is my soft close toilet seat popping?
Soft close toilet seats have hinged dampers that allow you to control the speed at which your seat closes.
If your slow-closing toilet seat slams, those dampers will likely need to be tightened.
In most cases, all you have to do is close and remove the toilet lid, find the screws on the hinges, and tighten.
Note: You can follow the first three steps in the previous FAQ!
How Long Do Slow Close Toilet Seats Last?
Depending on your maintenance and usage, soft close toilet seats can generally last five or more years.
They can work for around 30,000-50,000 reps if cared for properly (and your kids aren’t too rough with them!).
Sharing is caring!
Related searches to gsi soft close toilet seat
Information related to the topic gsi soft close toilet seat
Here are the search results of the thread gsi soft close toilet seat from Bing. You can read more if you want.
You have just come across an article on the topic gsi soft close toilet seat. If you found this article useful, please share it. Thank you very much.
