Are you looking for an answer to the topic “half tie dye hoodie“? We answer all your questions at the website Chewathai27.com/ppa in category: Top 867 tips update new. You will find the answer right below.
Table of Contents
How much tie-dye do you need for a hoodie?
For example, when I tie dyed one women’s small sweatshirt and women’s medium sweatpants using 3 different colors, I used almost all of the dye in my three 12 oz dye bottles. That’s about 18oz of dye per item. If you were to use only one color, you’d need about a 12oz bottle and half of dye for one item.
What is tie-dye hoodie?
With your hoodie placed flat on the plastic tablecloth, grip the center of the hoodie between the armpits and twist in one direction until the hoodie is bunched together. Tie 5 or 6 rubber bands around the outside of the hoodie to keep the swirl intact. Soak it in the dye solution bucket for about 30 minutes to 1 hour.
How do you dye clothes partially?
Dip a small corner of a piece of clean cloth into the hot dye, gently squeezing out the excess. Rub the area where you wish to apply the dye. For extremely small areas, you can use a cotton swab to apply the dye. Allow the dye to set for 20 minutes.
ONELOVE Half Tie-Dye Relaxed Fit Hoodie Sweatshirt
This method works best with Rit All Purpose Dye on natural fabrics such as cotton, linen, silk, wool and ramie. It also works on nylon and viscose. Fabrics with more than 35% synthetic material (such as polyester, acrylic or acetate) are more difficult to color correct using this method. However, we have some tips below.
How do you blend tie dye?
For bright, strong colors, mix 4 to 6 teaspoons dye powder per cup of Urea water or plain water. For medium shades, mix 2 to 4 teaspoons dye powder per cup of Urea water or plain water. For light or pastel shades, mix ¼ to 2 teaspoons of dye powder per cup Urea water or plain water.
ONELOVE Half Tie-Dye Relaxed Fit Hoodie Sweatshirt
5682 S Zedernstr
Littleton, CO 80120
303-763-9730
Direct Tie Dye Application Instructions:
When applying tie dye directly, you make small, concentrated dye solutions and squirt the dye onto the fabric. They don’t make big buckets full of paint and they don’t dip the fabric in the paint. When using dyes and chemicals it is important to protect your work area and always wear gloves and protective clothing. Please read our sensible safety and paint handling instructions before beginning your project.
Equipment you will need:
¨ Staining surface: Disposable, absorbent work surface such as cardboard.
¨ Job protection: Plastic sheeting covered with newspaper provides good job protection.
¨ Personal protective equipment: rubber gloves to protect skin from fixative irritation and paint stains; eye protection; Dust masks to prevent inhalation of powders. “Painting Shirts” to protect clothing.
¨ Bucket for mixing fixative solution
¨ Pitcher or glass for mixing urea water
¨ Beakers, bottles or other containers in which colorants can be mixed.
¨ Ties: Large, thin rubber bands, twine, sinew, cable ties, etc.
¨ Pipettes, squeeze bottles or other tools for applying dye.
¨ Measuring cup and measuring spoon.
Step 1: Wash fabric
Wash the fabric to remove any sizings or oils on the fabric that could affect the dye.
We’re including this guide because it’s a long-standing recommendation in fabric dyeing. Unless you’re concerned about the suitability of the fabric or the color of the tie, you don’t need to bother washing the fabric first.
Step 2: Prepare fixing water
In a plastic bucket or other suitable container, mix 3/4 cup of dye fixative per gallon of warm water. Expand the recipe as needed.
Dye fixative is a chemical called sodium carbonate or soda ash. Wear gloves to keep it from irritating your skin and avoid splashing it in your eyes to avoid irritation and burns; treat it like a strong soap.
Step 3: Soak the fabric
Soak the material to be colored in the color fixing solution. Allow the fabric to soak in the solution for 5 to 10 minutes or until the fabric is completely saturated. You can reuse the fixing water and treat multiple batches of fabric with the same mixture.
Step 4: Fold, twist or tie
Wring out excess fixing water back into the fixing water bucket. Place the pinned fabric on the dyeing surface and fold, twist or tie into the pattern you want to dye. For instructions on common themes, see later in this guide. The dye will spread on the fabric in different ways depending on how wet the fabric is with fixing water. With wetter fabric, the dye will flow into the fabric in feathery or mottled patterns. Dryer fabric gives cleaner lines and less bleeding. Different dye patterns look better with different moisture levels of the fixative in the fabric. For example, marble patterns will look better if you start with a wetter shirt, and striped patterns will look better on drier shirts.
Step 5: Prepare urea water for dyes
The recipe for urea water is ¾ cup of urea to 1 liter of warm water. Optionally, you can add 2 teaspoons of Ludigol and 1 teaspoon of water softener. This urea water is used to mix dye powders to make your liquid dye colors. If you don’t have urea or any of the optional chemicals, mix the dye powders with plain warm water. Expand the recipe as needed.
Step 6: Mix Dyes
At this stage, don’t make big buckets full of dyes. They mix dye powder in small, concentrated batches with urea water or plain warm water by the cup, as needed. You have control over the hue of the colors you mix by using different amounts of dye in your concentrated dye solutions. For bright, bold colors, mix 4 to 6 teaspoons of powdered paint per cup of urea water or plain water. For medium shades, mix 2 to 4 teaspoons of powdered paint per cup of urea water or plain water. For light or pastel tones, mix ¼ to 2 teaspoons of powdered paint per cup of urea water or plain water. Stir the dye well to completely dissolve the dye powder.
Step 7: Apply the color
With the fabric on the surface to be dyed, apply the paint to the fabric by squirting the paint onto the fabric with an eyedropper, squeeze bottle, or other paint application tool. Most dye patterns require the fabric to be saturated with dye. The mistake most beginners make is not squirting enough color into the fabric. At this point, apply all the different colors. Turn the fabric inside out and apply dye to both sides of the fabric, saturating each side of the fabric.
Step 8: After coloring
After you dye the fabric, leave it alone. Don’t solve it. Do not hang to dry. Leave it tied and leave it alone. Let the fabric sit for 2-24 hours. The longer you can let the fabric sit, the easier it will be to wash loose dye out of the fabric. The time you let the fabric sit is not overly critical. If you’re in a hurry, leave the fabric on for as long as your deadline allows.
Step 9: Wash loose dye from fabric
Wear gloves while handling the fabric as the dye will stain your hands until washed. Place the fabric under cold running water and rinse until no more color comes out of the fabric. We always say “rinse until you’re tired of rinsing”. Many loose dyes are washed out of the fabric. That is normal. The wash water can turn black or brown and the fabric can appear discolored by “dirty” dyes. That’s normal too. Put in the washing machine after rinsing. You can wash multiple items at once, up to a full load, even if you wash different colors. Front loading or low water washing machines tend not to wash out loose dye well because they don’t have enough water to dilute and wick away the dye. Spend extra time flushing if using a front-loading or low-water machine.
Use normal detergent in amounts for a normal load. Wash the fabric as many times as necessary until you have washed out all loose dye and the water runs clear on the rinse cycle.
You’re done! Dry like any normal fabric and enjoy!
Can you tie-dye a white hoodie?
Especially with a tie dye kit, a 100% white cotton sweatshirt will make sure the dye sets well. Less than 100% cotton is totally fine as well, but when you get to more than 50% synthetic material (e.g. polyester), the dye may rinse out and you’ll end up with a very pale tie dye sweatshirt.
ONELOVE Half Tie-Dye Relaxed Fit Hoodie Sweatshirt
Less than 100% cotton is also perfectly fine, but if you reach more than 50% synthetic material (e.g. polyester) the color can wash out and you end up with a very faded tie-dye sweatshirt.
You can also tie-dye a colored shirt, but the colors you use for tie-dying may not appear as expected.
In terms of cut or style, you can tie a hoodie, a zip hoodie, or a zip sweatshirt—they can all be dyed! The only consideration is the shape and design you want to make. If you want to make a women’s tie-dye sweatshirt, these tend to have more curves, so straight lines become curved on the sides. If you want to tie-dye a men’s sweatshirt, you will have more straight lines on the sides.
Can you tie dye a fleece hoodie?
You can’t tie-dye fleece using a tie-dye kit because the type of dye used is made for cotton fibers. But even tie-dye kits don’t work as well on natural fleece because due to the texture of the fabric, the dye often can’t penetrate the entire fiber. (You can still use the tools from the kit, but not the dye itself.)
ONELOVE Half Tie-Dye Relaxed Fit Hoodie Sweatshirt
Fleece can be tie-dyed as long as you use the right type of dye. Fleece can be made from cotton or wool, but most of these are synthetic fibers like polyester. Traditional tie dye kits will not work on polyester and due to the nature and texture of the fabric it is best to use Rit Dye which is appropriate for the type of fiber the fabric is made of.
Although you can tie fleece, it’s not one of the easiest fabrics to dye. That’s why I created this detailed guide to teach you how to properly tie fleece. This way, your tie-dye job will come out exactly or even better than you wanted.
Can you tie fleece?
Fleece can be dyed using traditional tie-dye methods and techniques. However, fleece can be made from different fibers, so you need to be careful to use the right type of dye. You should also know that the tie-dye method you use also depends on what type of fleece fabric you have.
Fleece can be made from natural or synthetic fibers. Natural fibers used to make fleece are cotton and wool, while the main synthetic fiber used to make fleece is polyester. Fleece made from natural fibers is much easier to tie than synthetic fleece.
When tie-dying polyester fleece, you should use an emulsion dye as it is made for synthetic fibers. You cannot tie fleece with a tie-dye kit because the type of dye used is made for cotton fibers. But tie-dye kits don’t work that well on natural fleece either, as the nature of the fabric means the color often can’t penetrate the entire fiber. (You can still use the tools from the kit, but not the paint itself.)
Rit Dye is the best type of dye for tie-dyeing natural and synthetic fleece. Rit Dye has two different types of dyes that you can use. Rit All Purpose Dye is designed to dye natural fabrics such as cotton and wool, but will work on any fabric containing less than 40% natural fibers. Rit DyeMore is suitable for dyeing 100% synthetic fibers or fibers containing more than 40% synthetic fibres. The technique you need to use with these two dyes is also different.
How to tie natural fleece
The squirt bottle method is the most traditional method of tie-dying. When it comes to tying cotton or wool fleece, this is the method you want to use. However, you should use Rit All-Purpose Dye as it will give you the best results.
The great thing about tying natural fleece this way is that you can tie-dye the fleece in one or more colors. But if you’ve never done tie-dye with Rit Dye, I’ll give you a list of all the materials and steps you need to know.
materials
Rit all-purpose dye
Rit ColorStay Dye Fixative (optional but recommended)
squeeze bottle(s)
rubber bands
Plastic tub
baking rack
Salt
measuring cup
plastic gloves
Plastic tablecloth
steps
Remove any stains and wash the fabric before dyeing. Use warm water and mild detergent, but no fabric softener. This will remove oil and dirt to give you the most even tie dye color possible. Do not dry the fabric. Lay the damp fabric on a plastic tablecloth or newspaper to prevent dye from staining your work surface. Put on the plastic gloves every time you work with the actual paint to protect your hands. Create your tie-dye design (the link shows you how to create different designs) and secure with elastics. If you’ve never dyed tie-dye before, the rubber bands will create white areas in the design. If using liquid paint, shake the paint until well mixed. Then fill a measuring cup with two cups of hot water. Add 2 tablespoons of liquid paint and 1 tablespoon of salt to the water. If using powder dye, fill a measuring cup with 2 cups of hot water. Then add ½ teaspoon of powdered dye and 1 tablespoon of salt to the water. Pour the dye and water mixture into a squirt bottle and shake well. If using multiple colors, repeat step 4 or 5 for each color depending on the type of paint you have and pour into a separate squirt bottle. Place the baking rack on the plastic container and place your nonwoven on the sheet. Splatter the paint onto the fabric where you want it. Leave the fabric for 30 minutes to ensure the color can absorb into the fibres. Optional Step: Mix 2 tablespoons of ColorStay Dye Fixative with water in a squeeze bottle. Mix it up and then squirt it all over the fabric to prevent the color from getting onto other garments. Then wrap the fabric in plastic wrap and microwave for 2 minutes. Hold the fabric horizontally and rinse in cold water until the water runs clear. Use scissors to cut off the rubber bands. Wash the fabric alone in cold water with a mild detergent, then tumble dry.
How to tie synthetic fleece
materials
Rit DyeMore
rubber bands
Pot made of stainless steel
Tongs
plastic gloves
Plastic tablecloth
steps
Treat and pre-wash the fleece fabric to remove stains, dirt and oil. Use a mild detergent and remember not to use fabric softener. You don’t need to dry the fabric. Lay the fabric on a flat surface. Create your tie-dye design (visit the link in the section above for ideas) and secure with elastics. Fill a stainless steel pot with enough water to cover the fabric. Three gallons is usually enough. Cover the pot, place the pot on the stove and heat the water to about 180℉, just below boiling point. Put on the plastic gloves. Shake the bottle of liquid paint thoroughly until well mixed. Then add half of the bottle to the pot of water and stir until the color is evenly distributed. Place the damp nonwoven into the pot and stir occasionally for up to 30 minutes. The longer the fabric is in, the darker the color will be. After 30 minutes or until the desired color is achieved, put on your gloves and use tongs to remove the fabric from the water. Squeeze the excess dye out of the fabric. Rinse the fabric in warm water first, then gradually allow the water to dye until it runs clear. Use scissors to cut the elastics from the fabric. Finally, wash the fabric in warm water with a mild detergent and then dry it.
Can you tie a fleece blanket?
Synthetic fleece is more difficult to bind because synthetic fibers don’t absorb dye as well as natural fibers. Because of this, you cannot use the squirt bottle method. Instead, you must use Rit DyeMore and the stovetop method to be able to heat the water to a hotter temperature. It’s difficult to tie-dye fleece in multiple colors this way, so you’ll likely only be able to tie-dye it in a single color. You can technically tie a fleece blanket. However, due to their size, it will be much more difficult to do so. Also, you are very unlikely to be able to tie a polyester fleece blanket. This is because you can only use the stovetop method and you would need to have a large pot to hold the blanket if you wanted it to be colored evenly.
If you want to tie-dye a cotton or wool fleece blanket, there are two methods you can use. You can use the squirt bottle method mentioned above, or you can dye the blanket in the washing machine. Either way, you still need to use Rit All-Purpose Dye.
How to tie a fleece blanket
Remember that you will have the most success if you tie a fleece blanket from natural fibers. With this in mind, the following methods are only suitable for dyeing natural fleece blankets, and not suitable for polyester fleece blankets.
squirt bottle method
If you want to tie-dye a fleece blanket in multiple colors, it’s best to use the squirt bottle method. You can do this by following the steps above. Just be aware as you create your design and bind it that you will be working with fabric in a much larger size.
You still prepare the dye the same way with the same measurements. However, due to the larger fabric you are working with, you may need more dye overall. Also, you may need to skip the optional ColorStay color fix step (step 9) as the blanket will not fit in the microwave. Otherwise the process is completely the same.
washing machine method
The easiest way is to tie a cotton or wool fleece blanket in the washing machine. However, you can only color the ceiling in one color. It’s also important to note that the paint shouldn’t stain metal parts of your washing machine, but it can stain plastic parts. Although it will stain the plastic swabs, the color should not get on your clothes with future use.
materials
Rit all-purpose dye
Washing machine
salt (when dyeing cotton fleece)
Vinegar (when dyeing fleece)
measuring cup
Small container
liquid detergents
bleaching
rubber gloves
Stages of front loading washing machine
Before dyeing, weigh your blanket so you know how much dye you need.
For blankets weighing 1.5 to 3 pounds you will need 1-2 bottles of liquid paint and 2-3 boxes of powder paint.
For blankets weighing 4 to 6 pounds you will need 2-3 bottles of liquid paint and 4-6 bottles of powdered paint.
Pre-treat the blanket and wash in warm water with a mild detergent and no fabric softener. Do not dry. After washing, create your tie-dye pattern in the blanket and secure with elastics. Put the damp blanket back in the washing machine. Turn the water temperature dial to the hottest setting. If your washing machine has a timed wash setting, make sure it’s set to cycle at least 30 minutes or longer, depending on how dark you want the color to be. Put on rubber gloves. In a separate container, mix either the liquid or powdered paint with 4 cups of hot water. In another container, mix 1 cup of salt with 4 cups of hot water if you are dyeing cotton fleece. Mix 1 cup of vinegar with 2-4 cups of hot water when dyeing fleece. Then, add 1 teaspoon of liquid dish soap to the salt water or vinegar water, whichever applies. Remove the detergent cup from the dispenser compartment. Pour the paint into the cup, and then pour the saline or vinegar solution into the cup. Start the cycle and let it run to completion. After washing, remove the detergent cup and rinse thoroughly with warm water until all dye is removed. Remove the blanket from the washing machine and use scissors to cut off the elastics. Place the blanket back in the washing machine and wash again with warm water and mild detergent. Tumble dry it. Clean the washing machine by wiping off any visible dye with an old towel. Then add bleach to the dispenser. Choose the largest load and the warmest water temperature, add a few old towels and some detergent and let the program run.
Stages of the top load washing machine
Before dyeing, weigh your blanket so you know how much dye you need.
For blankets weighing 1.5 to 3 pounds you will need 1-2 bottles of liquid paint and 2-3 boxes of powder paint.
For blankets weighing 4 to 6 pounds you will need 2-3 bottles of liquid paint and 4-6 bottles of powdered paint.
Pre-treat the blanket and wash in warm water with a mild detergent and no fabric softener. Do not dry. After washing, create your tie-dye pattern in the blanket and secure with elastics. Turn the water temperature dial to the hottest setting. Then fill the washing machine with enough water to cover the blanket and let it move freely. If using liquid dye, shake the bottle(s) well to mix, then pour directly into the water. Wear gloves when doing this. Stir the water to evenly mix the paint. If using coloring powder, dissolve it in 2 cups of hot water before putting it in the machine. Wear rubber gloves when doing this. Once the paint has dissolved, put it in the washing machine and stir the water to mix the paint evenly. Put the damp blanket back in the washing machine. Add ½ cup of salt to the water when dyeing cotton fleece; Add 1 cup of vinegar to the water when dyeing fleece fleece. Then add 1 teaspoon of liquid dish soap to the water. The blanket must remain in the wash cycle for 30 minutes to an hour before the rinse cycle begins to ensure the fibers absorb the ink. This means that you may have to restart the wash cycle a few times depending on the length of the wash cycle. After the blanket has been in the wash cycle for 30 minutes to an hour, depending on how dark you want the color to be, run the washing machine through the rinse cycle. After the cycle is over, use scissors to cut off the rubber bands. Wash the blanket a second time with warm water and a mild detergent. Tumble dry the blanket. Clean the washing machine by wiping off any visible dye with an old towel. Then add bleach to the dispenser. Choose the largest load and the warmest water temperature, add a few old towels and some detergent and let the program run.
Can you tie fleece with bleach?
Another technique you can use to tie-dye a fleece blanket is reverse tie-dye. This technique works on already dyed fabrics. Typically, when you reverse tie-dye, you remove the color with bleach. However, you should not attempt to reverse tie-dye using bleach. Because fleece is a soft fabric with a unique texture, bleach is too harsh to use on the fabric.
You can use Rit Color Remover instead of bleach to undo tie-dye. Rit Color Remover is a non-chlorine bleach that is safer to use on fleece and other fabrics. However, Rit Color Remover works best on natural fibers such as cotton fleece. It may not be as effective for polyester fleece. Below are the materials and steps on how to do this.
materials
Rit color remover
Pot made of stainless steel
Tongs
rubber bands
plastic gloves
steps
Wash the fleece fabric in warm water with mild detergent. Do not dry the fabric. Create your tie-dye design in the fabric and secure with elastics. Fill a stainless steel pot with enough water to cover the fabric and allow it to move freely. Cover and heat the pot on the stove until the temperature is just below boiling point (approx. 200℉). Once the water begins to simmer, add a packet of Rit Color Remover and stir into the water to distribute evenly. Add the fleece to the water and let the water simmer. Stir the fabric occasionally in the water. The color will start to come out of the fabric after about 10 minutes, but you may need to leave it in the water longer. Remove the fabric from the water when most or all of the dye has been removed. Then wash the fabric in warm water with a mild detergent. After washing the fabric, you can dry it if you don’t want to add new tie-dye colors. If you do decide to tie it, leave the fabric damp. You can tie the fabric to add color to the white areas using the spray bottle or stovetop method above, depending on the type of fibers that make up the fabric. If you want to bind it, just follow the steps above for each applicable method.
Conclusion
Tie-dyeing can be a great way to breathe new life into fleece fabrics. You can tie fleece using traditional tie-dye methods, but you must use the right type of dye for the type of fleece you have. Rit Dye works best on fleece fabrics as it provides the best color and most even dyeing. If you liked this article, share it with others and leave a comment. Thank you for reading!
Tie Dye Hoodies With Bleach
See some more details on the topic half tie dye hoodie here:
tie dye hoodie – Amazon.com
1-48 of over 5,000 results for “tie dye hoodie” ; Tiedye Pullover Hooded Sweatshirt (PC146) · 490 · $29.40 ; Tie Dye Print Hoodie Long …
Source: www.amazon.com
Date Published: 7/7/2021
View: 423
X-Ray Men’s Half and Half Tie Dye Pullover Hoodie & Reviews
Shop X-Ray Men’s Half and Half Tie Dye Pullover Hoodie online at Macys.com. Add comfort and to your wardrobe with Xray tie dye pullover and long …
Source: www.macys.com
Date Published: 7/27/2022
View: 9461
How to Tie Dye Sweatshirts & Sweatpants
If there’s one look that perfectly represents the Covid-era lifestyle, it’s the tie-dye sweatsuit. With so many of us staying home for the last ten months (omg, has it really been that long?!), comfort is key – so what better way than to inject a little personality into our sweatshirt and sweatpants uniform, than with cheerful batik color?!
Hoodies and sweatpants are odd-shaped items to tie-dye to, so we get a lot of questions about the best approaches to get great results. We’ve been experimenting a lot here at TNTP (both for ourselves and for workshops!) so we definitely have a few tricks up our colorful sleeves!
In this post I will break it down for you:
Tips for Choosing Sweatshirts and Joggers for Dyeing Tie-Dye (and Our Favorite Sources for Those!)
our recommended materials for tie-dyeing these bulky items
the best tie-dye patterns for sweatshirts and jogging pants
Step-by-step instructions for our favorite tie-dye patterns for sweatshirts and sweatpants (as seen in my outfit above!)
and finally, tips on how to rinse and wash them after the color has worked its rainbow magic!
How to tie sweatshirts and sweatpants
CHOOSING THE RIGHT FABRICS
The number one tip for tie dyeing sweatshirts and sweatpants is to check the fabric composition before applying the dye to the fabric. When dying a tie, natural fabrics such as cotton, rayon, silk and wool will take on colour, while synthetic fabrics such as polyester and acrylic will resist it. (Anyone who has dyed a 100% polyester item knows the disappointment when all the color washes out in the sink and you’re left with a still-white garment!)
The ideal sweatshirts and jogging pants are 100% cotton, but most sweatshirts and jogging pants are made from a blend of fibers. Blends also work as long as they are 50% cotton or more. Most well-known basics brands like Hanes and Gildan most commonly offer 50/50 cotton/poly blends (or something similar), but they also have some more cotton-heavy options!
Here are some of our favorite places online (besides Amazon) to source dyeable sweatshirts and sweatpants:
Dharma Trading – this site is the best resource for all things tie dyeing on the web! They source and produce tons of amazing dyes in 100% natural fabrics so they are guaranteed to look amazing. However, their items are often sold out, so check back often or contact them to find out when more items are in stock.
Bella + Canvas – a fabulous *wholesale resource for dyeable fabrics, more than just sweatshirts. You need a store ID and a resale certificate to shop from them. So this is a great resource for small business owners! You can also buy this brand from other stores like Dharma Trading – just search “Bella + Canvas”.
Gap, Old Navy, Target and other well-known retailers – their selection changes seasonally, but during the colder months these stores usually have a wide range of cozy items in 100% cotton or cotton blends
Hanna Andersson – this popular pajama brand doesn’t offer sweatshirts and sweatpants, but their DIY pajamas deserve an honorable mention!
OUR FAVORITE RIBBON ACCESSORIES FOR BULKY ITEMS
When you’re tying bulky items like sweatshirts and sweatpants, you want to be sure you have the right accessories to get the job done easily! These types of items are large and require a lot of paint, so make sure you have the right supplies on hand. We recommend the following:
HOW MUCH DYE IS NEEDED TO DYE SWEATS
Two packs of Tulip® One-Step Tie Dye® will make a full 12-ounce bottle. If you want your color to be more pastel, only use one pack with a full bottle of water.
Depending on the size of your item and the number of colors you use to tie-dye each item, the amount of dye you need may vary.
For example, when I tie-dyed a small women’s sweatshirt and medium women’s sweatpants in 3 different colors, I used almost all of the dye in my three 12 ounce bottles of dye. That’s about 18 ounces of dye per item. If you were to use just one color you would need about a 12 ounce bottle and half the color for one item.
THE BEST TIE PATTERNS FOR: SWEATSHIRTS
The most common thing that throws people off when it comes to tie-dying hooded sweatshirts is the hood itself. It’s an odd protrusion from the rest of the garment and people can easily be intimidated by it. The key is to remember that tie dye is all about surface exposure, so lay your hoodie flat – hood and all! – and choose a pattern or technique that is easy to integrate into the overall pattern. Here are some of our favorite tie-dye patterns for crew-neck hoodies and sweatshirts:
Swirl – see below for step-by-step tips!
Scrunch – see photo above!
Ice Dye – see second photo in this post!
Bullseye – Safety pin arms to body first
THE BEST TIE PATTERNS FOR: JOGGING PANTS
When it comes to sweatpants, the legs are the hardest part. There are two of these and they work independently – so depending on the pattern you choose, it’s almost like dyeing two items side by side. Here are our favorite tie-dye sweatpants patterns and techniques with some additional helpful tips:
Swirl – Pictured above – Begin your swirl in the crotch area and then continue to swirl until both legs are worked into the spiral
Scrunch – scrunch the entire garment into a large scrunch pancake, or scrunch the legs individually to reveal more surface area
Ice Dye – it’s a foolproof method! Crumple your bareback sweatpants into a cardboard ring and let the ice + color work its magic
Accordion Stripes – Both Ways! – Fold your pants horizontally (see step-by-step below!) or vertically for a tie-dye stripe effect
Tuxedo Stripes – accordion fold your pants horizontally (as pictured below) and tie and dye only the outsides of the pants with 1-3 elastics (if more than 1, tie tightly)
HOODED SWEATSHIRT WITH DARK PATTERN
Moisten sweatshirt & lay flat, hood & all!
Swirl up sweatshirt based on Swirl Pattern Tutorial! Make sure to hand-twirl the hood and sleeves around the outside to bring them into the spiral.
Tie it up like a pizza and place it on a tie stand!
Color each “slice” front and back.
Place carefully in a plastic bag and leave overnight. Find tips on rinsing and washing at the bottom of this post!
Do-it-yourself vertical striped jogging pants
Wet the sweatpants, lay them flat, and accordion fold the top of the pants until your legs part.
Accordion fold each leg independently, creating two accordion fold stacks.
Tie your sweatpants together, keeping the elastics a few inches apart.
Dye each section a different color, catching excess dye with your tie stand.
Wrap in plastic wrap to keep the colors from touching and leave overnight. Check out the next section for tips on rinsing and washing!
HOW TO RINSE AND WASH TIE DYE SWEATS
When your items are soaked, it’s time to rinse! Because these bulky items absorb a lot of paint, a lot comes out when you rinse them.
Start by giving the items a hearty rinse with the rubber bands still attached. This will help get rid of a lot of dye without too much mess.
Next, remove the rubber bands and continue rinsing, squeezing out as much dye as possible. Ideally, continue rinsing until the water runs clear, or at least until the water is only slightly tinted.
Wash items separately from other non-dyed items in the machine. Tie-dye items of the same color can be washed together first. For completely differently colored items, we recommend washing them separately.
Tumble dry and enjoy your new tie-dye cozies!!!
And there you have it! ALL my knowledge on how to tie sweatshirts and sweatpants! I hope this post has inspired you to tie some happy cozies to keep your spirits high and your body warm. Check out this post for all of our indoor coloring tips!
Happy crafting and share your tie-dye creations with us on Instagram @theneonteaparty!
peace, love & neon,
Marisa
How to Tie Dye a Hoodie: 12 Steps (with Pictures)
Tie dyeing has been a colorful DIY craft tradition since at least the ’60s, making clothing and linens more colourful, psychedelic and eye-catching. The tie dye process is easy to do in the comfort of your own home, even on something as bulky as a hoodie. Instead of buying a premade trippy hoodie, gather your supplies, set up a workspace, and do it yourself to create your own designs on the cheap!
ONELOVE Half Tie-Dye Relaxed Fit Hoodie Sweatshirt
It was beautiful but it bled so profusely and took on a color. Follow the washing instructions and it was a disaster. Very disappointed it happened
Related searches to half tie dye hoodie
Information related to the topic half tie dye hoodie
Here are the search results of the thread half tie dye hoodie from Bing. You can read more if you want.
You have just come across an article on the topic half tie dye hoodie. If you found this article useful, please share it. Thank you very much.
