How Long To Wait To Wash After Sublimation? The 25 Correct Answer

DYE SUBLIMATION TRANSFER SHEET PRESS INSTRUCTIONS AND GENERAL INFORMATION

These are MY specific processes and results may vary as each heat press is different (I have a Power Heat Press – which I love) and each material presses a little differently. These processes have worked really well on all the shirts I’ve ironed, but find a process that works for you, your equipment, and your fabric!

Dye sublimation is intended for 100% polyester materials in light colors (white, grey, pastel). It is possible to sublimate onto low poly count materials, but the lower the poly count, the less bright the image will be. I always say 100% poly gives you 100% full color transfer and 50% poly only gives you 50% full color. 50% offer more of a vintage look. Also note that if it is less than 100% it will also wash out in the wash. And note that a colored shirt will affect the color of the final design as the design colors “mix” with the shirt color.

TRANSFER SHEETS: The dye sublimation transfer sheets do not always “match” the colors or vibrancy of the design on the product listing. Please note that this does not mean there is anything wrong with your transfer slip. Colors are always muted on paper and the vibrancy comes out when the design is pressed. I’ve often noticed that greens appear gray, blues look very pale, almost non-existent, but they push in the right colors. I have many photo examples of pre-press transfer sheets and post-press material (before/after) on my Facebook group (PLT Wholesale) to give you an idea of ​​what to expect.

*Set heat press for 60 seconds at 400 degrees with medium-high pressure. Allow the heat press to preheat. Depending on the equipment and material, the temperatures can vary between 385 and 400 degrees and the time between 45 and 60 seconds. Also dye sublimation cannot be used with an iron. The temperature doesn’t get hot enough, you can’t get an even temperature or the right pressure. I also don’t think the process will work with a Cricut Easy Press, but I have yet to verify that.

* Pre-press the shirt for 5-10 seconds to smooth out creases in the shirt and remove any moisture that may be present. I like to take this time to press a center line into my shirt to ensure a straight design. I do this by folding the shirt in half lengthways and pressing. This creates a nice straight line down the middle of the shirt.

*Roll up the shirt to remove any residue that may be present as this can affect the adhesion of the sublimation design and can also result in blue looking dots appearing after pressing that will not wash out, so this step is very important!

* Place plain white copy paper between shirt layers to prevent bleeding on the back of the shirt.

*Fold the sublimation transfer sheet in half all the way up and all the way down (I don’t fold any part that has ink on it… just the very top and the very bottom). This is just to find the center of the design and mark it for proper alignment of the design. (If your design is not in the center of the arc, you will need to find another alignment method.)

*Align the center of the shirt crease line with the top and bottom center crease lines on the transfer sheet. The transfer sheet should be face down on the shirt at this point. The general rule for collar collar length is 3-4 finger widths down.

* Place parchment paper or unwaxed butcher paper on the transfer sheet. Teflon is designed to retain moisture, so it is not recommended for use in dye sublimation. To be honest, I’ve used teflon sheet on every shirt I’ve ever ironed and I’ve never had a problem, but this isn’t the recommended approach. I think you can use regular copier paper as well, but I’ve never tried that. Also, be careful using the same sheet multiple times as the design/ink can transfer onto the sheet and then onto your next shirt! Periodically check the sheet for ink deposits.

*Press shirt at 400 degrees for 60 seconds at medium-high pressure. If the design is primarily black I’ll press up to 70 seconds, but knowing your gear I won’t do this if you find your press is running hot.

*Open the heat press and remove the transfer film and press again for another 2-3 seconds.

*Remove the shirt from the press and shake it a few times to remove the iron lines.

Transfer sheets should not be used more than once. If you try, you might get a certain result for the second shirt, but it probably won’t be a good result. Once the transfer sheet is heated, it should be discarded.

Useful hints:

PRESS LINES: If you have problems with press lines, you can try the following: a) tear off the edges of the transfer before ironing to soften the edges b) use an ironing pad c) shake the shirt several times immediately after pressing. If the lines are coming from the actual roller and not the transfer sheet, try medium pressure instead of heavy pressure.

GHOSTING: If you’re having trouble with ghosting, make sure you’re applying enough pressure so the design doesn’t move during the heating process. You can also use an adhesive spray intended for sublimation. This will help hold the sheet against the shirt. *Note: Do not use any type of spray adhesion on your transfer sheet when using color printing spray. This results in the design not properly adhering to the shirt fibers.

BURN/BROWN: If you accidentally burn a shirt and it turns brown, try a 50/50 mixture of peroxide and water in a spray bottle and spray generously. Wash in the washing machine as usual. If you have a lot of shirt tanning/burning problems, you should get a heat gun and check that your heat press temperature is correct. Also, make sure your heat press hasn’t accidentally switched to Celsius.

LOW POLYESTER SHIRTS: If you’re ironing a shirt that’s less than 80% polyester, it’s a good idea to add dye press spray to the shirt to give the design better adhesion and improve wash-out. More on that later.

SHIRT SELECTION: Dye sublimation produces the best results on 100% polyester shirts. The results will be beautiful and shiny and there is no wash-out after washing. I would not use a shirt with less than 50% polyester. A 50% polyester shirt gives a vintage look because the dye sublimation will adhere to polyester fabric (so if there is 50% polyester you basically get 50% dye adhesion. The design may look better initially after pressing, but the Color also washes out after washing ). There is a product on the market called Dye Press Spray that can help with this. More on that below. Dye sublimation also gives the best results on white or light pastel colors. I sublimate some darker colors but personally I prefer to only use these if the design is a black design with no other colors. There is a stigma in the market that polyester shirts are ugly and/or uncomfortable on the skin. If you find this to be a problem, you need to do more research to find another shirt. I promise you, there are shirts made out of 100% polyester that feel like cotton.

GENERAL INFORMATION ON DYE SUBLIMATION; Dye sublimation is a permanent process and you never have to worry about things like cracking and peeling (like with vinyl). The dye sublimation process actually turns the ink into gas and permanently bonds to the fabric. As a result, the shirt does not feel heavy at all. Nothing “sits” on the shirt like vinyl or screen printing. The design is basically not felt at all. It’s part of the jersey.

DYEPRESS SPRAY: If you decide to buy a shirt that is less than 100% polyester and you want to preserve as much color as possible, there is a product on the market that will help you with that. It’s called dye press spray. This spray adds poly to the shirt for better press results. When using the Dye Press Spray there is no change in the pressing process, but before the pressing instructions above you should do the following:

*Spray a light mist of the dye press spray onto the shirt surface. If the shirt is wet, you have used too much.

* Press the spray well into the shirt fabric. This can be achieved by rubbing in with your hand or a clean brush. You want the spray to adhere to the shirt fibers as much as possible.

*Let the shirt dry completely. You can air dry it or throw it in the dryer. Squeezing the shirt without allowing the spray to fully dry will cause the shirt to burn, so just don’t do it.

*Now you can go back to the standard pressing instructions above.

* Do not use any type of spray adhesion on your transfer sheet when using color printing spray. This results in the design not properly adhering to the shirt fibers.

Want to get the most out of your sublimation projects? Here are seven tips for sublimation success:

1 – Take the correct measurements

In order to correctly sublimate the image on your item, you must measure accurately. When you purchase Pro World products, please refer to the product page for dimensions and instructions. And if you’re using Sawgrass Creative Studio, you can use the design template to help ensure a proper fit!

2 – Remove the protective cover

Some sublimation blanks have a protective film, check your blank to remove before printing.

3 – Check the temperature of the heat press

In order to cook your product properly, it is important that the temperature of your heat press is correct. Use the help of a digital thermometer to ensure your heat press is at the correct temperature. If the temperature is too low, your dish will be undercooked, and if the temperature is too high, you will scorch your project.

4 – Watch out for moisture

If you work in a humid area, be aware of moisture. Moisture on your project can cause flashing, which removes ink from the designated area. We recommend that you store your paper in a dry place. You can store it in a container or a resealable bag. If you are working with a garment, you can also pre-press it for 10 seconds to remove moisture and remove wrinkles. You can also place a dehumidifier in your work area to remove moisture from the air.

5 – Always attach your paper to your product

It is crucial that your sublimation paper stays in place during the pressing process. The slightest movement can cause ghosting, which is a shadowy effect. We recommend attaching your sublimation paper to your blank. You can do this with heat resistant tape or an adhesive spray.

6 – Cover your product

We recommend using a non-stick sheet or blank copy paper to protect your product and prevent the ink from rubbing off on other surfaces.

7 – Read the blank instructions before pressing your project

Read the instructions for your product to ensure you have the correct settings before you begin. Once you have finished sublimating your image, be sure to follow the transfer removal instructions. When the instructions say hot peel, it means you need to remove the transfer paper quickly to allow it to cool. Prepare for a hot scrub by donning your heat-resistant gloves so you don’t burn yourself. The sublimation paper, the product and the surface of the heat press are HOT.

Sublimation takes 10 minutes to learn and a lifetime to master. Gear and products are always changing, so there are always new lessons to learn whether you’ve been sublimating for 20 years or two days.

As a sublimation specialist, it’s my job to make these lessons easier for decorators. I am fortunate to be part of a team that has accumulated a bag of tricks for successful sublimation through years of trial and error.

Here are 10 tips passed on to me — and now to you — to help you do this process better.

1. Extend the life of the printer. To ensure the long life of the printer, keep it powered on at all times. It’s a common misconception that this causes more ink to be wasted, when the opposite is true. Leaving the printer on allows it to run short maintenance cycles to keep ink flowing and prevent clogged printheads. If you turn off the printer every night, the next time you turn it on, it will perform a more complete and thorough cleaning with a larger amount of ink.

2. Use it or lose it. A printer’s sublimation inks have a shelf life. Leaving them in the printer for too long causes problems such as color shifts, clogged printheads, and banding. Many people agree that you can print past the “use by” date without any problems, but a good rule of thumb is to use up the cartridges within six months of installing them. It is not recommended to print out the last six months of the expiration date. Marking the cartridges with the date you installed them is a good way to keep track of their lifespan.

3. Invest in good press. With proper maintenance, a quality heat press can last 10 years or more. Look for an industrial quality press that recovers quickly between presses and also has a digital display where you can see the temperature rise and fall. Investing in a digital pyrometer, a device that measures the heat of your press, can ensure the accuracy of the temperature reading.

4. Know your substrate. Certain substrates require additional accessories or a specific type of press for successful sublimation. Check with your dealer for product instructions and specifications to ensure you have the necessary equipment.

5. Always have extras. Always have extra parts on hand when sublimating, especially when working with a new product. Mistakes are made, be they human or mechanical, that affect your production process. So it’s always good to have backups.

6. Use everyday objects. You can use some common household items to successfully sublimate. Paper towels with no textured pattern or printing can be placed under hard substrates to evenly distribute pressure and contain spilled ink. Replacing Teflon sheets with butcher paper — also known as end roll paper — keeps double-sided items, such as B. Clothing, clean during production.

Use a lint roller on clothing to remove any stray fibers from the manufacturing process that can cause permanent blue spots on the finished product. Finally, lighter fluid can be used to remove fingerprints and adhesive residue from hard surfaces, resulting in a clean finish.

7. Choose the best glue. Use heat tape on hard substrates and repositionable spray on clothing. However, the latter comes in handy on double-sided, hard substrates when both sides are sublimated at the same time.

8. Improve your design skills. For some, the hardest part of sublimation is using design software, so take the time to learn these programs. Just knowing the basic navigation tools can save you time and headaches. Start small and build on your skills.

9. Use resources. Check with your distributor for available resources such as how-to videos, webinars, product templates and specifications, design software tutorials, and technical support.

10. Set the right price. There is no specific formula for pricing sublimated goods. Start by determining your production costs. Always remember that the value of a personalized item depends on what it is worth to the customer. 

Colin VanLint joined JDS Industries in the fall of 2015 and currently works as a sublimation specialist. He graduated from Northern State University with a Bachelor of Arts degree with a concentration in multimedia design. If you would like more information or would like to comment on this article, email Colin at [email protected].

What are the reasons for fading of sublimation prints on T-shirts?

spread the love

Last updated on:

There is a strong relationship between the fading of sublimation prints and sublimation transfer paper. Because the dye ink is easy to dissolve in water and fade due to poor quality sublimation paper. At present, the ink-jet printing method uses a principle that the sublimation paper is set at a high temperature like the ink-jet printing press method. The principle of sublimation paper is that the ink film continues to melt at high temperature and then melts in the fabric. Therefore, the above condition implies that the sublimation printing with a poor quality transfer paper will wash out the ink after washing. So gradually leads to fading.

Inkjet printing is commonly used in sublimation printing. Therefore, the cloth should be made of cotton or a polyester fiber material.

Discoloration from sunlight:

Sublimation prints easily fade when exposed to direct sunlight from UV rays. It has nothing to do with the sublimation paper and ink. The main reason is long-term exposure to pressure under direct sunlight. It fades sublimation printing faster.

How to overtake your competitors? Buy more!

Arrange a free consultation

spread the love

Tips for cleaning sports jerseys

At YBA Shirts, we’ve perfected our sublimation printing processes to bring you prints that remain bright and durable throughout your winning season. However, proper care can also play an essential role in ensuring that your sports jerseys last a long time. Here are a few tips to keep your team looking good.

Wash them together

One of the best ways to wash jerseys is with other jerseys. If you don’t have other jerseys to throw in the washing machine, you can use towels as well. The main idea here is to give the jersey enough weight for thorough cleaning. If you wash it alone, it will float on the water.

Neutral detergent

Make sure you use the right products and chemicals when cleaning your jerseys. Detergent is not just laundry detergent and dry cleaning chemicals can severely damage your jersey. Otherwise, you may find your jersey cleaned of its logos and numbers. With YBA shirts, our sublimation printing fuses the ink with the material itself, creating jerseys that will outlast the wear and tear of machine washing.

Rinse repeatedly

If your jersey hasn’t been washed in a while, consider rinsing it at least three times. This will ensure that all concession stand stains, sweat and grass stains come out clean.

Warm water

The temperature of the water is another important component in the care of your jersey. While many cleaning products work better in warm water, you should avoid anything above 100 degrees. If you know the water in your house is hot, try the cold setting.

Avoid the dryer

Dryers are never okay for sports jerseys. Even with high quality sublimation prints, a dryer can shrink the jersey overall and burn in what would otherwise have been temporary stains. Luckily, materials like polyester and mesh dry quickly, even without going through a drying cycle.

At YBA Shirts we can help you create the perfect designs using durable materials and prints. Our high-end sublimation and screen printing will keep your team looking sharp all the way to the championship. Best of all, we can have your custom made uniforms delivered to you within two to three weeks. Visit our website today to learn more.

Sources: https://www.mensjournal.com/style/keep-it-clean-jersey-care-for-rabid-sports-fans-20141222/

Sublimation opens up a whole new world of design possibilities. I really like that I can make a full color design as big as my sublimation printer will print. On top of that, I absolutely love that I don’t have to worry about layering. Don’t get me wrong, I love working with heat transfer vinyl. In fact, I often add it to a garment that I sublimate. But sublimation brings vibrancy with less effort and just one print.

The advantage of sublimation

One of the biggest disincentives to sublimation is that you need to have “special” materials. You can’t transfer a sublimation print to a plain mug from your local store. Well you could, but it would just rub off. If you try to sublimate onto any phone grip, you’ll end up just melting the plastic grip and making a big, smelly, gooey mess. You can’t just pull a shirt from your stash and print a nice sublimation design on it and call it a day. It must be a polyester shirt.

The problem of sublimation on natural fibers

If you could see my stock of 100% cotton shirts you would think I was a retailer (I’m not). Like most crafters, I was wild when I first started making shirts with HTV. Whenever there was a sale I stocked up and ended up having both youth and adult shirts. I have long sleeve and short sleeve shirts. I have red, yellow, black, white, green and even safety orange.

Here’s the problem though: you can’t sublimate onto natural fibers like cotton. BUMPER! Additionally, the best transfers are on light colors, not safety orange or black. DOUBLE BUMMER! However, if there’s a workaround, know I’ll find it. And that’s exactly what I did!

The trick to sublimating on cotton

While it’s true that dye-sublimation doesn’t work DIRECTLY on cotton, there is an INDIRECT solution. Through research (by research I mean checking out other great creators on YouTube and Instagram) and a little experimentation, I discovered that I can sublimate glitter irons. Well that was all I needed to know! I’m a glitter lover so this solution worked great for me. I also found that the same was the case with herd HTV. These are great alternatives because while you’re adding the full color of sublimation, you can also add extra texture and interest to your designs.

The magic trick: sublimation fabric sheets

I recently found out about another method. Did you know “sublimation fabric sheets” are a thing? They are. I found them on JDC.com, an online supplier of vinyl materials like HTV, Craft Sign vinyls, and other craft supplies.

The basic process is that you print your sublimation design onto sublimation paper. Then transfer the print to the sublimation fabric. The final step is to press your pressed sublimation fabric onto your garment. Easy enough right? It sure beats trying to cut and align multiple layers of HTV.

At first I was a bit skeptical. But the price point was low so it wasn’t a big deal. Also, I’m trying to figure out what works. Craft fails and I’m no stranger and I would never know if I hadn’t tried. So I gave it a try and the results were better than I expected. In fact, they are amazing! Alright, enough small talk. Let’s get down to business and create a sublimation design and press it onto a 100% cotton shirt. As a note, most of the materials are from JDC and I will link to them in the listing. Did you know that as a Creative Fabrica Craft or All Access subscriber, you can get an exclusive discount on JDC’s products? Be sure to check that out!

materials and accessories

cotton shirt

sublimation paper

sublimation fabric

Heat resistant tape

sublimation printer

Heat Press or Easy Press (household irons are not recommended)

Shirt design (I used this one from Creative Fabrica)

Cricut or other cutting machine (optional)

Green or Blue Cricut Cutting Mat

Teflon foil and/or parchment paper

lint roller

Note: If you do not have a sublimation printer, you can purchase a pre-printed sublimation print. Search “sublimation prints” on Etsy to find some options.

The process

creation of your design

Buy and download Creative Fabrica’s Autumn Sublimation Design. Upload the file to your cutting software (Cricut Design Space Silhouette Studio, etc.). If you’re using Cricut Design Space, you should upload it as a print-then-cut file. Paste the autumn sublimation design on your canvas. size of your design. In Cricut Design Space, you are limited to 6.75″ x 9.25″ for any print-then-cut design. You can also paste your design into a new Word document or other blank document and scale it there. You will have to cut it by hand if you choose this option. Select your design and create an offset. Your offset can be as thin or as wide as you like. Any part of the offset not covered by the design will appear white on your final design. The offset is what we will cut out of the sublimation fabric. Submit your design for cutting.

Working with the full color design (sublimation paper)

Be sure to “mirror” the full-color design. Load the sublimation paper into the printer. The paper I bought from JDC came in 11″ x 17″ sheets. I used a paper cutter to cut my sheets in half to 8.5 x 11 inches for use in my Sawgrass 500 printer. Make sure it is placed so that it is printed on the unprinted side and not the printed side. Send it to print. I prefer the system dialog for printing. This is especially important when printing on a sublimation printer. After printing you can either cut it with your cutting machine or trim it with scissors. Put aside.

Working with the offset (sublimation fabric)

Don’t mirror the offset. Lay your sublimation fabric backing (shiny side) down on your mat. Choose your material type for your cutting machine. On my Cricut Maker 3, I selected Glitter Cardstock and increased the pressure to More. cutting and weeding.

*Save extra sublimation fabric to use on future projects. We don’t waste good product.

Press your design

Set your heat press to 400 degrees Fahrenheit. Set the time to 50 seconds. Place your printed design, printed side down, on the fabric side of the sublimation fabric. (That’s why we printed the design in reverse).

You can use heat resistant tape to hold your design in place. Place the pieces on top of your heat press with the sublimated piece on top. Cover with a piece of parchment paper or Teflon wrap. Press at 400 degrees Fahrenheit for 50 seconds. Your design will be hot, so be careful when removing it from the press. Remove the top sheet of sublimation paper to reveal your design.

In the photo above, the left side shows the sublimation paper after pressing. The right side is the actual sublimation fabric after I press the design onto it. Honestly, I was so hooked at the time I didn’t even bother adding it to my shirt. The design was so bright! I was really amazed at the results. But then I remembered that the purpose of this project was to successfully sublimate a cotton shirt. So let’s finish what we came to do.

Press the design onto the shirt

Set your heat press to 302 degrees Fahrenheit and set the timer to 12 seconds (weird numbers, huh?). Place your shirt on your heat press and press for just a few seconds to remove moisture and wrinkles. Use your lint roller to remove any lint or dust from the shirt. Trust me, there will be fluff that you can’t see that will end up sabotaging your project. Remove the backing film from your printed design. Place your design on your shirt. For adult sizes, the general rule is about 3 inches from the collar. For children’s sizes, 2 inches is usually ideal. Baby bodysuits are about 2 finger widths down. Cover the design with a teflon sheet or a sheet of parchment paper. Press for 12 seconds at 302 degrees Fahrenheit. Remove the ironed shirt from the press.

My shirt came out beautifully and I couldn’t be happier. The transfer is soft and goes well with my shirt fabric. I love that even though I used a gray shirt I still have the full vibrancy of the design because I use the white sublimation fabric. I can go back and put some HTV up my sleeve just to get my HTV fix. But overall I’m very happy with the results. In fact, I’m already making more kid sizes so my kids and I can fit together (yes, I’m one of those moms). As I mentioned earlier, JDC sublimation fabrics are affordable. The package I purchased contained 3 sheets, each measuring 8.5″ x 12″. I can easily get 2 full baby designs from each sheet. Plus, I’ve taken the guesswork out of whether or not it really works for you.

Vinyls for your sublimation projects

JDC offers many more cool HTVs for your smart projects. Your Inkjet Printable HTV that not only accepts standard dye and pigment ink (from standard size inkjet printers) but also holds sublimation ink very well. This HTV allows you to sublimate 100% cotton and dark colored garments with your existing equipment.

They also list beautiful Rainbow White Glitter HTV which you can use to sublimate over the vinyl, cut, weed and apply to clothing for a full color glitter design.

More vinyl and HTV projects

If you’re not really into sublimation, there are still plenty of fun projects you can do with vinyl and HTV. Here are a few I liked:

Add HTV to shoes for a customized look

Create unique mouse pads

Make decals for your home, office or even your vehicle

Make funny stickers for your kids (Who am I kidding? The stickers are really for me)

Make signs for the porch

Add decals to your mugs and mugs

The list can be continued at will. For me, one of the best things is using Creative Fabrica images for these projects. Sometimes I use the images as they are and sometimes I combine them with other elements to create something new. I just love that I can easily download images and create whatever I want whenever I want. Combine that kind of creative freedom with cool products like the ones I’ve found at JDC and you have a winning combination.

If you love the beautiful fall design I used as much as I do, you can find it and many more designs on Creative Fabrica. Search “Autumn Sublimation” designs to choose from a huge selection. I would love to see what you create with sublimation fabric to sublimate onto cotton. Please tag me on Instagram, Facebook or TikTok. I’m EJsFunCrafting on all platforms. Make something nice!

Affiliate Disclosure: As an Amazon Associate, I earn from qualifying purchases. In addition, I may receive commissions for purchases made through other affiliate links in this post.

To prewash or not to prewash…that’s the question of whether you make and sell shirts or other apparel in your Silhouette or Cricut small business. (I’ve heard this is debatable in the sewing world too!) I say no pre-washing of clothes before embellishing. Here’s why:

4 reasons not to pre-wash

Washed is not the same as new. Washed shirts feel different than unwashed shirts. Customers expect a brand new item when they purchase. Prewashing can also lead to shrinkage! Manufacturers do not recommend it. I’ve never seen manufacturer instructions that recommend pre-washing a shirt (or other garment) before ironing. It is recommended to pre-iron with your heat press to remove moisture and wrinkles – but do not pre-wash. (If you’ve seen this from a manufacturer, please let me know. But I’m talking heat transfer material manufacturers, not bloggers or retailers.) Allergies and sensitivities. Many people are allergic or sensitive to dyes and fragrances. To avoid problems, skip the prewash. It’s time consuming. I don’t know about you, but I have enough laundry to do with 4 kids, a husband and a dog. The last thing I need is more laundry!

Tell me in the comments: Do you wash clothes before beautifying?

Was this post helpful? Save the image below to Pinterest.

Jimmy Lamb has over 25 years of product decoration experience and extensive knowledge of many facets of digital decoration and embellishment including business creation, applications, techniques, marketing, sales, mobile, manufacturing and management. He currently works at Sawgrass Technologies as Manager of Communications and Education where he was instrumental in the development of the training seminars and webinars.

What are the reasons for fading of sublimation prints on T-shirts?

spread the love

Last updated on:

There is a strong relationship between the fading of sublimation prints and sublimation transfer paper. Because the dye ink is easy to dissolve in water and fade due to poor quality sublimation paper. At present, the ink-jet printing method uses a principle that the sublimation paper is set at a high temperature like the ink-jet printing press method. The principle of sublimation paper is that the ink film continues to melt at high temperature and then melts in the fabric. Therefore, the above condition implies that the sublimation printing with a poor quality transfer paper will wash out the ink after washing. So gradually leads to fading.

Inkjet printing is commonly used in sublimation printing. Therefore, the cloth should be made of cotton or a polyester fiber material.

Discoloration from sunlight:

Sublimation prints easily fade when exposed to direct sunlight from UV rays. It has nothing to do with the sublimation paper and ink. The main reason is long-term exposure to pressure under direct sunlight. It fades sublimation printing faster.

How to overtake your competitors? Buy more!

Arrange a free consultation

spread the love

THIS INSTRUCTION SHOULD BE INCLUDED WITH ALL ITEMS SOLD TO YOUR CUSTOMERS!

Screen printed or sublimation clothing, blankets, bags, neoprene items:

Turn garment inside out (if applicable).

Machine wash COLD, GENTLE cycle.

DO NOT use fabric softener or bleach.

NO or LOW heat to dry: Hang dry is preferred.

Do not dry clean.

Sublimated mugs and cups

Mug: HAND WASH ONLY

Cups: Dishwasher safe