How To Clean Silicone Pipe With Glass Bowl? The 98 Correct Answer

Cleaning your bong is necessary for many reasons: It removes the foul-smelling sap, mold, and tar that builds up in a bong over time.

Resin can cause serious lung problems if inhaled often enough. Mold and tar can also be health hazards and a bong filter can only do so much!

If you use your bong regularly, your baby will need to be cleaned fairly frequently. We’ll show you how to clean a bong, whether it’s made of glass, silicone or acrylic!

Sex toys like vibrators, dildos, and anal toys come in direct contact with bodily fluids, so knowing how to clean them properly is important. Cleaning your sex toy doesn’t have to be complicated, but the consequences of neglect can be.

“Using unclean sex toys can potentially introduce unwanted bacteria or other pathogens — like fungi — into the vulva-vaginal environment, which can lead to an overgrowth of bacteria known as bacterial vaginosis, or cause a urinary tract infection,” he said Sexologist Amanda Morgan, a fellow visiting professor at the University of Nevada, Las Vegas. “The thorough cleaning of toys that are used by several partners is particularly important.”

Almost any type of sex toy can be cleaned with liquid soap and water and then air dried. But we will also identify situations when it is better to disinfect your toys more thoroughly.

Which solvent cleans silicone?

Posted at 4:47pm in Blog by admin in Article

Cured silicone is notoriously a difficult substance to remove from any surface. To take it off, you often have to resort to scraping and pulling, and the procedure can be tedious. While you can find industrial silicone remover products, these are not safe for home use. Instead, you can use a range of safer options, some of which you may already have.

Removal of silicone seals

Silicone caulk lasts for many years, but it wears out and when it does you need to remove it before you can apply fresh caulk. Anyone who has done this knows that some household solvents will soften silicone grout, but none will dissolve it. A common removal strategy is to soften the caulk with a liberal amount of plasticizer and then cut it off with a knife or pull it off with pliers. After the bulk is gone, you typically use the same solvent in combination with a scouring pad to remove the residue.

Softening solvents

An item you may have on hand to soften silicone is mineral spirits, which is suitable for removing silicone from hard surfaces such as tile, marble, or concrete. However, when removing plastic or painted surfaces, isopropyl alcohol should be used, which will not attack the surface. Regular alcohol you may have for home use may not be strong enough to get the job done. Instead, try an industrial-grade isopropyl alcohol that is 99 percent pure.

Other solvent options for silicone include toluene and xylene. When choosing a solvent, always consider the material being cleaned to ensure it is compatible. Test your chosen solvent on a hidden spot before using it on a larger scale to make sure it won’t do any harm. It is also important to read product instructions, follow all instructions and warnings, and ensure adequate ventilation.

Silicone sealant has an odor similar to vinegar because, like vinegar, it contains acetic acid. Consequently, white vinegar is another solvent you can use for soaking. It may not work as well as mineral spirits or alcohol, but it poses little danger to the substrate to which the caulk is adhering. Rubbing a tabletop that has been exposed to silicone wax with vinegar can safely remove some silicone.

Cut out the mass

Solvents like vinegar or mineral spirits, and even stronger ones like paint thinner, will swell cured silicone. This loosens the adhesion to the substrate and makes it easier to cut the sealant with a knife.

To remove stubborn grout, you can either apply the solvent repeatedly or soak a rag and place it on the grout. Once it softens, the most efficient way to remove the mass is to cut as close to the substrate as possible with a sharp knife while pulling on the caterpillar. Once that’s gone, a thin residue usually remains.

remove residue

The residue left after you cut out most of a joint compound can still prevent new joint compound from adhering and must be removed. Rubbing with sandpaper or a sanding pad is not a good strategy as the caulk will tend to form small balls that will stick to each other and the paper or pad. The best strategy is to soak the residue with more denatured alcohol, alcohol, or vinegar to soften it further, then scrape it off with a scraper or sharp knife. Continue working on the residue using this strategy until it is completely removed.

Source: https://www.hunker.com/12623575/what-solvent-will-clean-silicone

ترجمه این صفحه به : Persian

Is hand sanitizer bad for silicone rings?

In 2020 we used hand sanitizer copiously as we looked for ways to prevent potential COVID-19 virus germs from infecting us. It sparked stories of hoarding and price gouging, and regular news stories about where to find it in stock, either from an online retailer or in local stores. It has been frequently touted by public health officials as one of the best ways to prevent the spread of the coronavirus, along with washing hands, social distancing and wearing a face covering.

With all the benefits of hand sanitizer and the frequency with which we use it today, many people wonder if it’s safe to use with jewelry like silicone rings. The answer is complicated, so let’s cover the basics here.

Alcohol damage to silicone rings

Silicone rings are made from a silicone rubber material and although the silicone material is generally non-porous, harsh chemicals such as alcohol can quickly dry out the silicone ring and cause the material to deteriorate. Silicone has also been shown to have limited resistance to acids and bases that you may find in hand sanitizer ingredients such as: B. hydrogen peroxide. At very low concentrations it may not cause any problems, but at higher concentrations these chemicals can cause corrosion and discoloration.

Safer cleaning for a silicone ring

The safest way to clean your silicone ring is actually also the easiest. Simply use mild soap and warm water, being careful to get into the grooved areas of the ring to remove any traces of bacteria from daily wear. If you expose your ring to something that won’t come off with hand washing, there are other ways to clean and sanitize it.

Scrub the ring with a soft-bristled toothbrush and mild soap or detergent to remove ingrained dirt and grime.

Boil the ring in a small saucepan of water for 15 to 20 minutes. Carefully remove it with pliers and let it air dry for a few minutes before reinstalling.

Place the ring in the dishwasher for a cycle to sanitize. Since it’s very small, make sure you enclose it in something so it doesn’t fall on the bottom of the dishwasher onto the heating element. A baby bottle nipple holder or in an enclosed part of your cutlery tray works well.

Stay safe with hand sanitizer and protect your silicone ring

As hand sanitizer continues to be a good idea to help protect you from the spread of diseases like COVID-19, don’t give it up entirely. Instead of risking damage, simply remove your silicone ring when you need to apply hand sanitizer. Wait a minute or two for your hands to dry completely, then put your ring back on.

6 / 9 Natalie Board/Shutterstock Clothes with a mixture of bleach and vinegar work great in the washing machine to get the musty smell out of your clothes and keep them looking clean, but don’t think about putting bleach in there too. Mixing vinegar and bleach creates a toxic gas that’s really bad for you and even worse for your clothes. Be sure to avoid these other cleaning products that you should never mix.

7 / 9 smolaw/Shutterstock hardwood floors This varies depending on the surface finish of your floor. Using vinegar on some hardwood floors will damage the finish. While it’s best to use a cleaner specifically formulated for cleaning finished hardwood floors, Cameron says your floors should be fine if you heavily dilute the vinegar with water or other cleaning products. However, if you don’t want to take that risk, a safer DIY solution is a mixture of liquid detergent and water. It’s one of those uber valuable, almost forgotten house cleaning tips from the past.

Glass has always been the material of choice when it comes to making pipes, bongs, dab rigs and other smoking devices. But silicone parts are quickly becoming just as popular.

Silicone is used in all kinds of products these days, and that’s no surprise. Silicone is a synthetic material made by heating a mixture of sand and quartz to create a stable polymer that is highly resistant to chemicals and heat. It can withstand temperatures of up to 520 degrees Fahrenheit and does not emit gases or chemicals when heated like plastic does.

For stoners, this is an ideal next step in the development of smoking devices, as silicone parts are significantly more durable, offering longer life and almost completely eliminating the risk of damaging or destroying a part. Think of all the broken pipes you would have if they were silicone instead of glass.

There are a few differences between glass and silicone, and cleaning is a big one. Silicone hoses take longer to get dirty and are usually much easier to clean. However, the way you clean your silicone pipe is very important. Typical glass cleaning methods should not be used on silicone.

Substances such as salt, vinegar, and isopropyl alcohol are commonly used to clean glass. But these cleaning solutions are too harsh for silicone and can cause it to break down much faster than if you clean it properly.

Common cleaning methods for silicone tubes

The best way to maintain and care for your piece is to rinse with hot water and wipe with a paper towel or cloth after each use. This will help prevent larger resin build-up from forming too quickly. But there will come a time when a thorough cleaning is due. Here are a few ways you can properly clean your silicone parts.

soap and water

This is an easy way. Because silicone provides a non-stick surface, you won’t find the rock-hard, baked-on resin that you typically find on glass pipes, bongs, and other parts. With a little effort, mild soap and water, you can give your jewelry a thorough cleaning. You want to make sure that any soap you use isn’t oil based. Oil can cause silicone to break down over time by causing the silicone to swell as the oil is absorbed. There are specific cleaning solutions for silicone pipes, but as long as you use a gentle, water-based soap, you’ll ultimately get the same results.

dishwasher

feeling lazy? This is for you! Silicone is dishwasher safe. Depending on the type and shape of the piece of silicone you want to wash, you can get a pretty decent clean with this method. But the dishwasher may not always get into the nooks and crannies of your piece. The condition of your rinse water can also affect the end result. If it’s an older, possibly worn-out machine, it may not be enough. You should also always rinse your piece when it comes out of the dishwasher to ensure no detergent residue is left behind. This could degrade the health of your silicone over time, giving you some nasty soapy-flavored hits.

freezing method

This method requires a bit of preparation and waiting time, but is definitely less labor intensive than washing your pipe by hand. For best results, you should have your pipe very dirty. The more build up, the better this will work. Rinse your pipe thoroughly, then stick it in the freezer while it’s still damp. You should leave them in there for at least a few hours. When water and resin freeze, they combine. Once you’ve pulled it out of your freezer, all you have to do is bend and squeeze it. You will hear the resin and ice break off the surface of the silicone. Then simply rinse it well, pat dry with a towel or let it air dry.

The final result

Silicone is becoming increasingly popular due to its durability and convenience. Silicone is efficient, practical, affordable, safe to use and lasts a lifetime. But as with any of your smoking pieces, regardless of material, part of being a healthy and responsible smoker is knowing how to properly care for and clean your pieces. If you want the best hit quality and long lasting durability from your pipe, bong or other silicone tool, keeping that thing clean and fully functional is crucial.

Get a new silicone pipe, bong or other silicone tool at the Atomic Blaze Online Smoke Shop.

They say if you drop a glass pipe and it breaks, your heart will break too.

Next time on glass, swipe left and try hitting a nice young silicone pipe instead!

Silicone hoses never fall or break, they’re easy to clean, much cheaper, and last forever.

We spent a week testing some pretty awesome silicone weed pipes to find out which are the best. See for yourself!

The answer is ultimately up to you

With the advent of herbal smoking taking the world by storm, it would be natural to explore more advanced methods that can enhance the smoking experience and offer more choices to the user. With the various improvements over the years in smoking circles, it was inevitable to come across materials that offered more protection, durability and cost-effectiveness. Meet silicone, which excels in all three areas. The truth is that although silicone offers more to the user in terms of practicality, glass is more aesthetically pleasing, so it undoubtedly comes down to personal preference and what you want.

While glass remains the more popular option of the two due to its sleek looks and ability to deliver a full flavor profile, silicone offers the practicality of ensuring the user gets to the experience without worrying about user-to-user accidents who may or may not be experienced in the use of incense burners. Another advantage of silicone is the fact that you will always leave a session knowing that your investment was indeed a good decision.

The Pros and Cons of Silicone Smoking Pipes vs. Glass Smoking Pipes

tube professionals

Silicone will never break on you like glass. This makes silicone a better option for beginners and those who want to take their smoking devices to parties.

It’s much easier to clean than glass. Simply taking the silicone apart to get into those hard-to-reach places is something glass can never do. Oh yes, it’s also very pliable, which helps to get into the little crevices.

It’s generally the cheaper option between the two as you won’t find a silicone bong for a few hundred bucks. Glass takes more work to produce than elaborate designs, and silicone looks great but is less expensive to make in comparison.

pipe cons

Pure taste is sacrificed for practicality. Granted you can smoke a silicone pipe and you might not notice much of a difference, but in general glass pipes offer users the luxury of purity over all other materials such as metal, wood and of course silicone.

You don’t see the smoke, which many people enjoy. Silicone is usually monochromatic or an abstract mix of swirling colors that obscure the user’s view of the smoke.

Pieces of glass or pipes tend to be prettier. While there are both good and bad designs in both glass and silicone, the general trend is for glass to be more elaborate in design, which makes it nicer to look at.

Should I buy a silicone whistle?

If you’re ever in doubt as to whether or not you prefer a silicone piece to a glass piece, then rest assured that if you choose silicone, it will be a better choice for all of the reasons listed above. The pros outweigh any cons, and silicone is definitely worth a try! You’ll have a hard time finding a bad piece of silicone and most likely you won’t be disappointed. Silicone is efficient, practical, affordable, safe to use and lasts a lifetime. Aside from being easy to clean, silicone offers the added benefit of being food safe like glass.

Although glass offers more purity in terms of taste, silicone doesn’t affect taste as much as metal or other materials and being food safe it is safe to use when heated. Don’t worry about harmful fumes or unwanted chemicals floating around your room or stuff with silicone. If you want a whistle with all these great features, then take the plunge and go for a quality silicone whistle that’s made to last!

Related blog posts

Are silicone hoses dangerous?

Silicone bong vs. glass bong – comparison of water pipes

Silicone bongs – the complete list of this pipe

To clean a glass bong, simply shake it with rubbing alcohol and coarse salt, then soak.

Thoroughly clean your bong about once a week to ensure you’re getting the safest, best-tasting smoke.

Change the water in your bong after each smoking session to avoid inhaling mold and bacteria.

When you smoke cannabis from a glass water pipe called a bong, the resin of the cannabis slowly builds up over time. This will leave a sticky residue on the sides of the glass. Eventually, stickiness will render the bong useless if it builds up too much. It also discolors the water and dilutes the flavor of the smoked cannabis.

“It’s about security,” says Harrison Baum, CEO and founder of Daily High Club, an innovative digital glass business. The safety risk, according to Baum, is that mold and bacteria can grow in the water. “A dirty bong is a health hazard and can also make a bad impression when smoking socially,” he says. “Don’t be the person who pulls out the dirty bong.”

As our culture becomes more accepting of cannabis, it’s wise to follow weed etiquette scrupulously. Luckily, the ingredients you need to clean your bong can usually be found around the house. There are also products on the market specifically designed for cleaning bongs.

How often should you clean a bong?

Sticky resin builds up on the inner walls and quickly turns your water brown. golddiamondphotography/Getty Images

Most experts say you should clean your bong after a few days to a week of use. You’ll also need to replace your bong water frequently, ideally after each smoking session to prevent mold. Any water that is in a water pipe is at risk of mold.

“You’re literally inhaling through your bong, and mold can grow in as little as 24 hours,” says Baum. “If you had mold in your house you would probably freak out, so why should breathing it in be acceptable?”

In fact, inhaling the bacteria and mold in dirty bong water can lead to pneumonia and pneumonia. Additionally, any resin that builds up in the bong can provide an environment for a biofilm to form, which can harbor harmful bacteria that you certainly don’t want to breathe in.

The color of your bong water is your best indicator of when you should give it a deep clean. Even when it’s clean, water in a dirty bong will appear brownish-green due to resin sticking to the glass. When it’s dark and almost black, it’s high time to clean your bong.

Fresh water and a clean glass mechanism help improve the quality of the experience. You can taste the flavor profile of your cannabis more effectively, and cleaning your bong over time will also increase the bong’s lifespan and value.

What You Need Isopropyl alcohol: 91% to 99% isopropyl alcohol works best

Salt such as Morton’s table salt, Epsom salt, rock salt, or Himalayan salt. Salt is coarse enough to scrub off attached resin but soft enough not to scratch the glass.

A large resealable plastic bag

pipe cleaner

detergent

disposable gloves (optional)

How to Clean a Glass Bong Fill your bong with isopropyl alcohol and salt, shake and soak. Lindsey Bartlett This simple and effective method always works. You can put on disposable gloves before beginning these steps if you want to avoid sticky residue on your fingers. Remove shell and stem. The bowl and stem are where you place your cannabis. You can remove this part and it makes cleaning the bong much easier. Ideally, you don’t want to get your head wet when you dump the bong water. Pour out the old water. Bong water is sticky and resinous, so pouring it down the drain is not ideal if you can avoid it. You can throw it in the trash if you have a properly sealed garbage bag, or you can throw it in a sealed container to throw away. You can also dispose of your bong water outside – just don’t try to water any plants with it. The same bacteria and mold that can harm you also harm your plants. Place the bong in a zippered bag. A large gallon-sized bag should be large enough and will help contain the mess. If you don’t have a ziplock bag handy, you can do these next few steps in a trash bag or over your sink. Just be careful because the bong resin can get stuck to the sides of your sink. Pour isopropyl alcohol inside the bong. Pour your isopropyl alcohol into the top of the bong. Use about 16 ounces depending on the size of your bong, or just enough alcohol to fill the bong about halfway. If you’re using a special isopropyl bong cleaning mixture, pour that into the bong instead. If you don’t want to use isopropyl alcohol, you can also use white vinegar and baking soda – just let it soak longer. Put salt in the bong. This salt will help gently scrub the inside of the bong to remove the resin. The alcohol alone will clean it out pretty well, but the salt will remove the buildup from the sides of the bong. Use a healthy amount to ensure the salt can scrub off the resin. Seal bag and shake. This part can get dirty, so seal the bag to shake the alcohol and salt mixture inside the bong. If you have a percolator bong, make sure the mix gets into all chambers. You may have to turn the bong upside down a few times to penetrate all the cracks. Leave on for 30 minutes. Using the bong, let the alcohol mixture sit for about 30 minutes. This step isn’t always necessary depending on how dirty you get your bong, but soaking will improve the effectiveness of the alcohol in cleaning your glass. Remove the bong and discard the bag. This is why the bag is so important: you can just seal the bag with dirty bong water and throw it away. This avoids the resin contamination in the sink. Rinse bong with warm water and soap. It’s best to remove all alcohol and salt from the bong before using it – especially since alcohol is flammable. Dish soap and warm water work well to break down residual oil on the glass. Soak the bowl and stem in alcohol to clean them. Use a pipe cleaner to scrub any stuck resin out of the stem. Rinse it well with hot water and let it dry completely before loading it with cannabis to use.

How to clean latex or acrylic bongs

Unlike glass, you need to be extra careful when cleaning latex, plastic, or acrylic bongs. Use only hot water and a pipe cleaner or large straw brush. This is because alcohol can degrade and strip certain acrylic and latex materials.

Fill the bong with hot water and rinse it out over the sink. You will rinse and repeat until the water runs clean. Latex or acrylic safe bong cleaning solutions are also available.

How to clean a silicone bong

Silicone bongs are very durable and easy to clean. But the traditional methods of cleaning glass bongs can be a bit too harsh for silicone.

Here are several methods to clean a silicone bong and keep it in perfect condition:

Dishwasher Method: If you have a dishwasher, you can take your bong apart and place the parts on the top rack. Then just run it through a wash cycle. If you have fragile attachments, such as B. a glass bowl, you should clean them separately. Rinse the part as soon as you remove it from the dishwasher to remove detergent residue.

If you have a dishwasher, you can take your bong apart and place the parts on the top rack. Then just run it through a wash cycle. If you have fragile attachments, such as B. a glass bowl, you should clean them separately. Rinse the part as soon as you remove it from the dishwasher to remove detergent residue. Soap and Water Method: Mild dish soap and warm water is a safe and effective method for cleaning silicone. Remove any small pieces and set aside. Rinse out your bong with hot water, then pour a generous amount of dish soap inside your bong. Use a bottle brush to remove resin from hard-to-reach places. Rinse the bong thoroughly with warm water and let it air dry on a dish rack.

Mild dish soap and warm water is a safe and effective way to clean silicone. Remove any small pieces and set aside. Rinse out your bong with hot water, then pour a generous amount of dish soap inside your bong. Use a bottle brush to remove resin from hard-to-reach places. Rinse the bong thoroughly with warm water and let it air dry on a dish rack. Freezing Method: Freezing your bong is a great way to remove accumulated dirt and resin. Start by rinsing your bong with water to cover the surface. Place your silicone piece in your freezer for several hours. When you take it out, flex the silicone to remove the frozen dirt from the sides, then eject and discard. You can follow this with a cycle in the dishwasher or a rinse with soap and water to ensure it comes out completely clean.

Quick tip: avoid abrasive cleaners like steel wool as they can scratch and damage the silicone.

Insider snack

Cleaning your bong is essential to your health and enjoyment.

While you can buy blends at the store that promise to clean your bong quickly and efficiently, you can also use a combination of isopropyl alcohol and salt that will clean your bong well.

For other types of bongs, like silicone or acrylic bongs, you’ll need to use a less abrasive method like hot water and dish soap.

It’s pretty sticky work, so wear disposable gloves and avoid dumping dirty bong water down the drain.

Miraculous Forms FAQ

Many of the frequently asked questions about our silicone molds, impression mats and onlays have been answered below. If you have a question that is not answered here, please contact us; We will respond promptly and may add your question below to help others. For general shipping information, see our Shipping and Ordering Information page.

1. Are your silicone molds food safe?

Yes! All of our silicone molds, impression mats and onlays are made from silicone that complies with all Food and Drug Administration regulations in FDA 21 CFR 177.2600. Our silicone has also been subjected to FDA extraction testing by an accredited and independent laboratory. This test expressly certifies that our molds are safe for water-based foods and foods that contain fat.

2. Can I use non-food materials in your molds?

Yes, our silicone molds, impression mats and onlays also work well with other moldable materials such as polymer and precious metal clay, wax, plaster of paris, plastic casting resin, cement, low melting point metals, sculptor’s and potter’s clay, melt & pour, lye soap, paper mache, hot glue and much more. However, if you are using a mold for a non-food purpose, DO NOT use that mold for food. Molds used with food should only be used for that purpose; They are NOT interchangeable with non-food forms.

3. How long will my silicone molds last?

Marvelous Molds are commercial grade molds with a toughness that ensures reliability and durability. However, many things can affect the lifespan of your silicone molds. What is the mold used for? Has it been properly cleaned and stored? How often is it used? The more a mold is used, the more wear and tear it will undergo. Proper care can help keep your molds in good condition for a long time. Improper care will result in more damage to your molds.

4. How should I clean my molds?

Our silicone molds, impression mats and onlays can be washed or boiled with hot water and mild soap. They are also dishwasher safe. Never wash Marvelous Molds with abrasive cleaning pads or detergents such as Ajax cleaners.

5. How should I store my molds?

Always clean your molds before storing them. Silicone molds, impression mats and onlays should be stored flat, either wrapped or in food grade storage containers. Do not store anything on top of it that could weigh it down or deform it, as this could compromise the integrity of the shape and potentially alter its natural shape.

6. What is the temperature range of Marvelous Molds?

Our silicone molds, impression mats and onlays can handle temperatures up to 450 degrees Fahrenheit. They can also be placed in a freezer without damage or loss of flexibility.

7. Do you ship your products outside of the US?

Yes, our products can be shipped worldwide. Generally, we ship international packages through the United States Postal Service.

Cleaning a silicone hookah

I recently sat down with some friends at a party and they were impressed with my silicone hookah. And they had questions. Does it smoke differently? is it safe to smoke how to clean it I can understand your hesitation, but the questions were easy to answer!

Silicone products have hit the market hard. I’m sure you even have a silicone cooking utensil somewhere in your kitchen, and let’s not forget how amazing silicone dab containers have really changed the way we store our wax concentrates. Food grade silicone is perfectly safe to smoke. Its non-stick surface and break resistance make silicone a natural choice for those who frequently break their pipe. But the question remains.. How do you clean it?

Just as there are different methods people use to clean their glass pipes, the same applies to silicone. Let’s go through some of the most popular methods:

SOAP AND WATER

OK, so that’s a given. A little elbow grease and a mild soap with a little water works wonders. Because it’s non-stick, silicone won’t stick to the oils that your glass hand pipe or hookah has burned onto the surface.

DISHWASHER

I wash almost all my dishes in the dishwasher. Heck, I throw everything in there from my toothbrush to my shoes. Putting your silicone pipe in the dishwasher can get it clean, but that’s not my preferred method. I think it depends on how well your dishwasher cleans and what type of detergent you use. Maybe my dishwasher needs replacing (free, after all!).

FREEZE METHOD

I had a friend tell me that he actually just sticks his silicone pipe in his freezer for a few hours to clean it. With this method, your silicone tube must be DIRTY. Like you never cleaned it or it was a really hot minute with a lot of use. Rinse the pipe and toss it in the freezer while still wet. wait a few hours As soon as you pull it out of the freezer you start flexing and squeezing your pipe. You will hear pops and if you did it right all the ice and accumulated resin will fall off cleanly. This method works best when you have time to kill.

Keep in mind that while isopropyl alcohol and salt are great for your glass pipes, they are not a recommended method for cleaning a silicone pipe. Alcohol, hydrogen peroxide, and oil-based cleaning products can chemically damage the silicone and cause unwanted swelling when absorbed into the silicone. At Up-N-Smoke, we think the best solution is plain old soap and water mixed with elbow grease.

If you’ve been thinking about a silicone hookah as an indestructible piece, then you’ve come to the right place. Visit one of ours

. Many of our silicone whistles are currently on sale and our knowledgeable staff are on hand to guide you through the different styles.

Silicone is a non-stick material used in bakeware, cooking pans, spatulas and other tools and is popular for its ease of use as food slides right off the surface. It’s easy to use, but not necessarily the easiest to clean. Although silicone can go in the dishwasher, you will likely need to hand wash the items. Here’s how to clean your silicone cookware in a few easy steps.

How often to clean silicone kitchenware

Silicone dishes should be washed after each use. Once the parts feel sticky, a more thorough cleaning is required or the situation will only get worse.