How To Get Sound From Car Dvd Player? Best 51 Answer

“Where there is no sound, there is no entertainment”. Indeed, this is because watching something without audio is a bad experience. In fact, most people would rather not watch at all. Speaking of sound, some users have reported problems with DVD players with no sound and this can happen when users try to watch on TV or on PC. Hence, we will present the possible reasons why this happens and how to fix it.

No sound from the DVD player through the TV

When your TV displays pictures well with no sound, the experience is frustrating to say the least, even after trying to adjust the connections. While there are several reasons why DVDs have no sound, there are almost always ways to fix this problem. Therefore, check out the reasons behind it and the corresponding fixes.

Reason 1: Cable problems

The most common reason why a DVD has no sound when you try to play it on your TV could be the connection. If the cables are loosely connected to the DVD or TV and the cables are not connected to the correct port, you will almost certainly not receive any sound and sometimes even no picture. In this case, make sure that the cables are connected securely. If you are sure that the cables are securely connected, there is most likely a problem with the connector. In that case, take your DVD for diagnostics or invest in a new one as DVD players are very cheap.

Reason 2: Muted audio in your DVD settings

It is possible that the sound of your DVD player is completely muted. To make sure the sound is not muted, go to your DVD settings to check. Alternatively, you can press the mute button on the remote control to unmute.

Reason 3: DVD player or disc problems

You should also check the DVD itself. If it’s too scratched or damaged, that could also be another problem. In such a scenario, you can convert the disc to a video format for playing in other ways. Leawo DVD Ripper can help you with that. Offering a range of output formats, Leawo DVD Ripper is designed to convert DVD to desired video/audio files with simple clicks. Besides, this program also allows backing up DVDs that come with region protection.

Leawo DVD Ripper ☉ Decrypt and rip DVD with disc protection and region code

☉ Convert DVD to MP4, MKV, AVI, MOV, FLV and other 180+ HD/SD formats

☉ Convert DVD main movie to videos to save space

☉ Convert 2D DVD movies to 3D movies with 6 different 3D effects

☉ Fast conversion with acceleration technologies NVIDIA CUDA, AMD APP and Intel Quick Sync DownloadDownload

If the DVD is homemade and non-commercial (homemade DVDs use different codecs), this could also be the problem as the correct audio codecs are needed to produce audio. In this case, try using a newer DVD player with newer software that supports additional codecs.

If you still have audio problems after trying the above fixes, you can try to play your DVD on PC. If you’re having trouble with audio on your PC, see the next section of this guide for the appropriate solutions.

No sound from the DVD player on the PC

Basically, without sound, there is no point in continuing to watch your DVDs because it completely spoils the experience. If you also have no sound from your DVD player on your computer, this can have several causes. So what drives DVD to have no sound on PC problems? Luckily, there are many ways to solve this problem and we’ll show you how to do it.

Reason 1: The main audio might be muted

Before playing your DVDs on your PC, you need to make sure that everything your DVD player needs, including audio, is turned on. It is normal to mute the computer sound sometimes, especially when you are working, and it is also normal to forget to do so. You might also unknowingly mute the sound. To unmute the sound, go to the system tray and unmute from the sound icon.

Reason 2: The sound device might be disabled

For some reason, the audio device on your computer might be completely disabled. When a device is disabled, it means that the device remains connected to the computer, but its driver is unloaded from memory and its resources are freed. As a result, the corresponding device cannot be used. Luckily, you can reactivate the device. To do this, open the Device Manager on your computer and then expand “Audio Inputs and Outputs”. Locate the audio device, right-click it and enable it. If the device cannot be activated, it is probably due to a hardware error. In this case, you should bring the computer in for repair.

Reason 3: Lack of our outdated audio drivers

Audio drivers are a set of files responsible for telling your computer’s speakers how to work by communicating with your computer’s operating system. In fact, all pieces of computer hardware require drivers and cannot function without them. Therefore, if your computer’s audio drivers are missing, no sound can be produced at all. To update or install audio drivers, simply go to your computer’s settings and then click “Check for updates” under “Updates & Security”. Install the appropriate device driver and restart your computer.

Reason 4: An incompatible media player

Also, your DVD may not produce any sound if the selected player is not fully compatible with DVDs. It could also be because the player lacks audio codecs that are needed to play DVDs. To make sure this is the case, try playing a different DVD to see if the problem occurs on all DVDs. If this is the case, contact the developer who made your media player for updates, or you can try an alternative DVD player like Leawo Free Blu-ray Player.

Bonus: Powerful yet free media player to play Blu-ray/DVD on PC

If you consistently have no sound on the DVD player when you play it through a TV, you can try playing your DVDs from your computer. If you are also not receiving sound from your DVDs through your computer, one of the reasons could be the DVD player you are using. In this case, you can try another media playing software like Leawo Free Blu-ray Player.

Here is a video guide on how to use Leawo Free Blu-ray Player:

You can set the HDMI audio signal output from playback devices connected to the receiver with an HDMI connection.

I can’t imagine active loudspeakers without a volume control. No remote control with you? Can you post a model number or picture?

I used to use the same speakers with my LP player (which worked perfectly as the LP player obviously had volume controls). I don’t know if the speakers belong to the LP player or not. From what I understand it may have come with a remote control, but I don’t remember seeing one as the speakers were quite old and used when I got them. I don’t have the speakers handy at the moment but will post a model number or picture when I do!

The lack of audio from your sound system can be frustrating, but the steps below will help locate and resolve the issue.

Note: If the system does not turn on, see Device has no power.

Note: If the system speakers are playing sound but your wireless subwoofer is not, see Connecting your wireless subwoofer.

Does HDMI transmit audio? In general the answer is yes. HDMI is a type of interface commonly used on computers and TVs to carry audio and video data. However, some people find that the HDMI sound does not work when connecting the computer to a TV, monitor or other device. This post on MiniTool will show you how to fix the problem yourself.

On this page: HDMI sound not working

HDMI audio not working

HDMI, short for High-Definition Multimedia Interface, is actually a proprietary audio/video interface widely used on TVs, monitors, computers and other devices to smoothly transmit audio data (compressed or uncompressed) and video data (uncompressed). HDMI is better than similar interfaces like component video cables in picture quality, surround sound audio, 3D support and more aspects.

Want to convert AVI video/audio to other format?

Does HDMI transmit audio? Yes, of course; HDMI can easily transmit both audio and video data. Why do people ask such questions? That’s because they find HDMI sound not working or HDMI audio not working. HDMI audio not working, commonly seen on Windows computers or TVs; The following sections provide instructions for resolving the issue in both cases.

HDMI no sound: Windows

If you find that there is no audio coming out of HDMI after connecting your computer to an HDMI device, please follow the methods below to solve the problem.

Firstly, check that you have used the correct HDMI cable for the HDMI device.

Second, set HDMI as the default audio device.

Press Win + R. Type mmsys.cpl and click OK. Make sure the Playback tab is selected. Select Speakers/Headphones or Speakers and Headphones (make sure the HDMI cable is plugged in). Click the Set Default button. Select the output device connected via HDMI. Click the Set Default button. Click the OK button to confirm.

Tip: If you can’t see all available audio devices in the Sound window, you should right-click anywhere in the list and make sure Show Disabled Devices and Show Disconnected Devices are checked.

Third: Run the Windows Sound Troubleshooter.

Press Win + S. Type troubleshoot. Select Troubleshooting Settings. Scroll down the list in the right pane to select Play audio. Click the Run the troubleshooter button. Wait for the problem detection process and follow the prompts to make the changes suggested by the troubleshooter.

Other methods to try:

Enable all audio controllers.

Update/reset graphics driver.

Uninstall and reinstall the display audio and audio controllers.

Check the monitor or TV audio settings.

How to fix no sound on laptop windows 10?

HDMI to TV No sound

If you find there is no sound through HDMI after connecting the TV with an HDMI cable, please follow the steps below to troubleshoot the issue.

Step 1 Check HDMI signal format in Android TV settings.

Press the HOME button. select settings. Select TV -> External Inputs -> HDMI Signal Format -> select correct HDMI 1~4 -> select Standard Format instead of Enhanced Format. (This step varies from TV to TV.)

Please change the settings for each HDMI port that a device is connected to.

Step 2: Check the HDMI cable.

Make sure the HDMI cable is properly connected to the source device and the TV.

Step 3: Configure your TV.

Set the TV to the correct video input to receive signals from the source device.

Step 4: Configure the source device.

Adjust the audio output setting of the source device to output a compatible audio signal.

Step 5: Try another TV.

Remove the HDMI cable from the current TV and connect it properly to another TV. This way you can determine whether the problem is with the source device or with the HDMI cable.

Step 6: Perform a power reset depending on the TV type.

Step 7 Replace the HDMI cable if there is any problem.

Step 8: Perform a factory reset if necessary.

How to Fix HDMI No Display or No Sound Issues.

How to recover files after factory reset a laptop

The lack of audio from your sound system can be frustrating, but the steps below will help locate and resolve the issue.

Note: If the system does not turn on, see Device has no power.

Note: If the system speakers are playing sound but your wireless subwoofer is not, see Connecting your wireless subwoofer.

Yes, all HDMI cables carry the video and audio signals directly. You can’t have one without the other, so if you only have one of the two, the HDMI cable is almost never the issue.

If you have a problem with the sound, check the settings directly on your source. In Windows, select the HDMI output as the default device in the playback devices audio settings.

If you’re on a console or DVD set, check the audio settings as recommended by Jen_Sai. The audio signal must be selected as HDMI on a PS3, for example.

If you are using a DVI to HDMI cable, DVI usually does not contain audio and may be your problem.

I hope you solve any problem. ^^