How To Hang Plants On Vinyl Fence? Top Answer Update

Most homeowners lucky enough to have vinyl siding find that sooner or later something needs to be done to the siding or trim. Christmas lights are a great example, or maybe a hanging plant. Rather than using nails, screws of various sizes are often required and preferred.

advertisement

Accesorizing vinyl trim

Rust is the bad guy when it comes to choosing the right bolts for the job. One of the worst things to see on vinyl siding is a streak of rust flowing down from a simple drywall screw. No matter where you live, moisture causes regular screws to rust, and often the rust shows up quickly. Even some galvanized screws will rust over time, but choosing the right product has a secret.

advertisement

video of the day

Most hardware stores sell screws in their hardware section. They are available in many lengths and thicknesses or diameters. On each box of better quality screws, the manufacturer puts a label that clearly states where the screw should and should not be used. You’d be surprised how many professionals don’t choose the right screw for the job. A stainless steel screw is the very best, but also the most expensive. Vinyl coated screws are great too. In most cases, you can purchase these in rather small quantities. Whichever screw you buy, make sure it’s a Phillips head as it’s the easiest to use.

advertisement

Of course you want to be safe when climbing ladders to drill into the siding. Make sure your ladder is secure and that the cord for your drill is not in your work area. You’ll likely find that cordless drills work well.

Vinyl siding is easy to penetrate, but there are spots you want to avoid inside the siding’s profile. Two-section side panels, known as “ship laps”, have a rib running horizontally down the center of the piece. Attempting to place the screw through this center rib can be awkward. The screw tends to wobble a lot until it enters the bulge. It’s much easier to move up or down into the smoother field where you’re only penetrating a single layer of vinyl.

advertisement

Some homes have siding installed over styrofoam insulation or other fibrous material. Do not screw into areas of the wall where there are no studs. Make sure your screw not only penetrates the siding but also finds one of these studs. If you miss it and the screw is just in the vinyl field it will come loose leaving a bigger hole and can cause whatever you are hanging to fall off and break.

advertisement

Another area is vinyl trim on joists and eaves. This is a vinyl coated flat sheet. Bleeding is usually applied over solid areas. The trick here to avoid running your screw all over the metal fairing is to use a nail set, or even just a larger nail, and tap a small pilot pit in the fairing piece. The screw stays right there and goes easily into the fairing.

advertisement

If you know you’re going to be installing a lot of screws, most hardware stores sell a screw bit that actually holds the screw by itself, so you don’t have to risk your fingers awkwardly trying to hold a screw in place while drilling. These bits are magnetized and relatively inexpensive. If you’re climbing a ladder trying to reach that last screw, you’ll be glad you bought this piece. And always remember to work safely on ladders and with drills.

Whether you need to store something inside or outside your fence, you need to figure out how to attach wire liner to a vinyl fence. Vinyl fences last longer than wood because they are weather resistant; It is less likely to mold when exposed to moisture. If you’ve already installed a vinyl fence and want to make it more secure with a welded wire fence, you’ll need some basic skills and items. Read on for tips to help you complete your fencing project.

Choose a type of welded wire fence

The type of wire liner you choose depends on the type of fence you are creating. If you keep chickens and need to keep small predators like rabbits away, consider using chicken wire. For cattle, you can use welded wire fences. You can choose uncoated, plastic coated or vinyl coated fence to attach to your vinyl fence post.

Pro tip: Vinyl is preferred over other materials because of its weather resistance and durability.

Fasten your fence

To install wire ladder, you should measure the perimeter of your fence. You’ll need enough coils of wire to border your fence—and possibly a gate, too. Unroll your wire liner against your fence and line it up evenly between your vinyl fence posts before attaching for fence staples. If you’re trying to keep small animals indoors or out, dig a trench under your fence and bury some of the wire fences about a foot underground.

Install fence claws

The best fasteners for a welded wire fence are rust resistant and reusable. Cat’s Claw Fasteners are four times stronger than U-Nails and are easy to install with a power drill. You don’t have to be a pro to know how to attach wire liner to a vinyl fence when you can use our fence picks to get the job done quickly and efficiently. Visit our online store to get your first tin of fence claws today.

Vinyl siding suction cups that stick every time

FrogsFeet™ Suction Cups are perfect for vinyl siding because they have a specially designed perimeter seal that conforms and bonds to vinyl siding surfaces, creating an airtight and watertight barrier. Unlike ordinary suction cups where water can seep and slide under the rim of the suction cup, FrogsFeet stays dry under the suction cup and resists lateral movement. This makes our suction cup the best solution when it comes to hanging Christmas lights and decorations on vinyl siding. FrogsFeet™ can also be attached to structured surfaces, while normal suction cups don’t stand a chance! Choose “The sucker that won’t give up!” – FrogsFeet™

Check out our suction cup

How to stick our suction cup to vinyl siding

Further proof that FrogsFeet vinyl siding suction cups are unique is the way they apply to multiple types of surfaces: press and hold the center while lifting the tab, and then run a finger firmly along the outside edge of where you want to place your door. It can support 8 pounds on smooth surfaces and 3 pounds on textured surfaces. See how our suction cup sticks better than other leading suction cup manufacturers.

Why choose FrogsFeet™ for your vinyl siding suction cup

FrogsFeet™ vinyl siding suction cups have an environmentally stable proprietary seal around their perimeter that will adhere to almost any non-porous surface, smooth or textured, outperforming virtually any vinyl siding suction cup maker on the market.

Vinyl siding suction cups withstand extreme temperatures because the polymer gasket compensates for the expansion and contraction of the suction cup and mounting surface. The vinyl siding suction cup will not let go or slip in damp or wet environments such as vinyl siding because the seal prevents moisture from entering and penetrating the interior of the cup. This makes them ideal for longer vinyl siding, in hot and cold, rain and snow. Normal suction cups fail in every respect! FrogsFeet™ Vinyl Siding Suction Cups is the USA suction cup manufacturer you can depend on.

Check out our suction cup

Another way to completely hide a fence behind greenery is to plant shrubs along its length. Shrubs not only hide the fence and add visual appeal, they also add privacy so you can enjoy your garden to the fullest. Oleander’s (Nerium oleander) floral beauty and lush greenery make it a natural choice for clad vinyl fence in USDA Zones 8 through 11. However, avoid planting oleanders if you have children or pets as all parts of the plant are poisonous if ingested. Butterfly bush (Buddleia davidii), suitable for USDA zones 5 through 10, is an excellent shrub for attracting butterflies and hummingbirds to your area, and will do double duty by hiding the ugly fence.

“Is this vinyl fence any good?” asks Jim, a longtime customer of Fence Supply Online.

Jim buys a lot of fences from us and we know him as a man who likes his wood.

“You won’t find any faults or better quality than our black vinyl fencing,” was our expert’s response.

Jim then took a step back, looking a little skeptical but ready to hear more.

You can see that Jim and many other customers only know wood and don’t know much about vinyl fencing.

One morning, over coffee, we were chatting about Jim and his wood-loving friends. The theme was black vinyl fencing and how to show these guys how good the fencing is now.

We can all agree that black vinyl fences can add a touch of elegance to a property. The experts all nodded their heads and made a few suggestions.

Black vinyl fences can add a touch of elegance;

Always looks good

Color will not fade on black vinyl fences

They have an excellent range of styles

Maintenance is not a problem

Let’s take a closer look at each point.

Always looks good

Black vinyl fences will always look good on the property.

When you’re installing a privacy fence you want it to look good and we have a wide variety of styles to choose from.

Our ranch fencing features quality and style while keeping cattle and horses under control.

A vinyl picket fence is proving very popular this season and there’s nothing quite like one on the property.

When you think of vinyl, think of how good it looks and how good it will look for many, many years to come.

Color will not fade on black vinyl fences

Part of the great appeal of vinyl fencing is how long they last and how little maintenance you require.

A problem with black vinyl fences used to be that the paint would fade or chalk in the summer sun.

Our partnership with BLACKline vinyl fencing changes all of those worries.

Your products are guaranteed not to fade, chalk or crease under the summer sun. The additives withstand the heat at far higher temperatures than we get, and for a long time too.

You will enjoy the strong colors for the life of the fence.

They have an excellent range of styles

Adding that touch of elegance to the property should be done from our selection of styles.

The black vinyl fence comes in an elegant style that will always catch the eye of friends, family and neighbors.

Privacy fencing can tower over an area of ​​the garden, but BLACKline fencing enriches your garden without making it feel like a prison.

Ranch fences stand tall, sturdy and proud, keeping the cattle in the paddock and the ranch looking tidy.

The semi-private styles of lattice or batten roofs are new additions and keep the flow of air and light into the courtyard area.

Choose a style that suits you and the vinyl fencing won’t let you down.

Maintenance is not a problem

Many fences look great when you install them.

However, a few years later the color will begin to fade or it will rust and the wood may begin to chip in places.

Maintenance is essential with all fences, but it can get expensive. If you don’t keep up with the work, you will face many problems.

Black vinyl fencing requires almost no maintenance. There is no painting, staining, sealing or touching up rust spots.

The low maintenance is also cost-effective.

Give us a call

At Fence Supply Online we like to talk about black vinyl fencing.

Our experts will help you answer all your questions.

Use our Draw It & Quote It software to get an idea of ​​the costs.

For all of your black vinyl fencing needs, give us a call today.

Enter the characters you see below

Sorry, we just need to make sure you’re not a robot. For best results please make sure your browser accepts cookies.

A quick tip for hanging decor on vinyl siding without damage.

The other day, while sharing our big (well, technically small) patio reveal, I received LOTS of messages in my inbox asking the same question: How did you hang the decoration on the side wall?

Apparently it was worth a whole “another post”. But it’s easy as pie.

(Affiliate links are provided below for your convenience. For more information, see my full disclosure here.)

All you need are these vinyl siding clips.

It took some muscle power to separate our siding enough to wiggle them in there, but it was still quick and fairly easy.

They can’t hold 100 pounds or anything crazy but so far they have been great for holding this pair of metal trough boxes I got from Curtis Creation for my herb garden.

To attach them to the hooks I simply used an old wire hanger to loop them through the screw holes in my boxes, twist and hang them.

The little hooks made it really easy to hang our outdoor lights on the corner of our house too.

The only downside is the hooks only work if you have vinyl siding that can be separated. If you have wood siding that is fully attached to your house, they won’t work.

So far they’ve been great and haven’t caused any damage to our siding at all.

I’m glad the little wall on our patio doesn’t look so bare anymore, and I can just step out the back door and snip some herbs out of those trough shelves whenever I feel like throwing something in my kitchen.

Oh, and I didn’t mention it before, but you see our “table” right there with the lemonade pitcher on it? This is a planter we use as our rustic “tree skirt” at Christmas. It’s a nice parking spot for this keg until December rolls around again. When I was last in the garden department at Lowe’s, there were still plenty of them.

Do you have any outdoor decorating tricks of your own? Have you ever added decoration to your siding? I think I will use these little hooks in other parts of our exterior as well.

If you missed our backyard patio reveal, you can check out the full post and all sources here.

And if you need to come back to this post later, you can pin it here:

*This post may contain affiliate links. We receive a commission at no additional cost to you if you use any of our links. Please read our disclosure for more details.

Decorating your patio to match this festive season sometimes requires the use of string lights, but hanging them is usually the hassle.

However, hanging lights on the patio without holes or nails on any surface is entirely possible.

These inexpensive alternatives are the perfect option to avoid drilling damage and are easy to remove.

The best way to hang patio lights without nails is to use gutter hooks, adhesive hooks, clear tape with a strong and reliable hold, use a hot glue gun or staples to hang the lights. Other methods include zip ties, wrapping the lights around potted plants, or attaching them to the trees.

Although your options may be limited depending on where exactly you want to hang these patio lights without drilling and using nails, some of the methods mentioned in this list will likely work for you.

The first two options are probably the best ways to hang lights, but the others will work too.

Here’s a more detailed look at each of these methods:

Ways to hang lights without holes or nails

1. Gutter Hook

Check out this set of 100 String Light Gutter Hooks on Amazon

For a best practice, using gutter hooks would be the best option.

These are S-shaped hooks that you can buy at any local hardware store that can be attached to the gutter on one side while the other end can be used to hang the lights.

These are easily removable and can be placed anywhere you want them. It’s the perfect way to hang string lights on your patio.

2. Adhesive hook

Get this set of damage-free command hooks from Amazon

An alternative to the previous hooks would be to use adhesive hooks.

These hooks are a peel and stick option where the flat surface is glued to the surface and the hook part can be used to hang your lights.

You can find these hooks in one set and the great thing about this idea is that it can be used on most surfaces.

However, you should pay careful attention to the quality of these adhesive hooks to ensure they are reliable and strong enough to withstand the weight of the lights that attach to them.

Note that some adhesive hooks have a sticky surface (depending on the quality), it’s hard to tell if they will damage the walls or not as they can leave residue.

3. Tape

Here’s another method you could try, and that’s with duct tape.

You should try to use clear tape as it is less obvious. Duct tape ruins the overall aesthetic of these lights.

Try to find some tape that is sticky enough that the lights will actually stay in the area where you plan to hang the lights somewhere on the patio.

4. Glue Gun

Since you want to avoid drilling holes in the walls, you could try using a glue gun to hang your lights.

Alternatively, you could even try gluing the hooks to hang the lights.

Usually a hot glue gun has a pretty good grip, so try a test and see if this method works for you.

The only problem with this option is that you might leave glue marks or residue on the surface that might be a hassle to clean.

5. Staples

The great thing about staples is that they can be easily removed with pliers and leave no visible damage.

At most, you’ll probably only have two small pinholes. Regular office staplers will probably not do the trick, so be sure to get the proper stapler that is typically used in carpentry.

But if you’re hanging something like fairy lights on the patio, this would be a great option.

6. Railing

So this idea isn’t technically about hanging the lights, but you can try wrapping the string lights around your patio railing.

You can still create that atmospheric and aesthetic vibe even if the lights are not hung.

But you can use any of the other options on this list like the adhesive hooks, ribbons or staples to hang the lights on the patio.

7. Zip ties

You can use zip ties to hang the lights from one area to the next and this is especially good for using on plants without damage.

If you want to be frugal, you can get a set of reusable zip ties so you don’t have to cut or throw them away when you turn off the lights.

A similar alternative to using cable ties is cable ties. This involves taking a piece of the tie and twisting it to close it.

Both options are generally inexpensive and do a great job!

8. Potted plants

You can display or hang the fairy lights by attaching them to potted plants.

But you need to make sure these plants are heavily weighted so they don’t all tip over when the lights are attached to more than one of them.

9. Trees

The last option would be to attach these lights to the trees.

You will need to wrap one end of the lights around the branch or you can instead drill a hole in the branch to attach the nails or hooks to hang these patio lights.

This will prevent any structure of your home from being damaged, but it probably won’t do much damage to the trees either.

Conclusion

These are the best alternatives to drilling holes when you need to hang patio lights.

From this list, I’d say the best option is to use gutters or adhesive hooks, but many of the other methods work just as well depending on a few factors.

But considering the main focus is on avoiding drilling, these options are great.

You will be able to avoid using nails and you will have no problem dismantling the lights in the future as they can be easily removed and taken off.

If you have any additional methods that I may have missed, please share them below so others can learn about them.

Before you go, I’d like to recommend a few more ideas that you might enjoy reading:

Where should I hang plants in my room? (tips, ideas & more)