How To Jack Up A Ford Fusion? The 7 Latest Answer

If you hear that bumpa-bumpa-bumpa sound while driving on the road, you know that one of your tires is flat. And that means if you’re not lucky enough to have access to roadside assistance for your vehicle, you’ll soon have to change it yourself. If the mere thought of using a jack makes you break out in a cold sweat – and a lot of people does – don’t worry! Just study these three video clips and follow these six simple steps and you’ll be getting your vehicle airborne in no time without hurting it or more importantly, you.

Step 1: Find a safe place to stop

Get off the road and get as far away from traffic as possible. If you are on a freeway and near an exit, take it. The goal is to get completely off the road and onto a firm, level surface – such as a parking lot – where you can safely use a jack. Otherwise, you want to find your way to a street or road with as little traffic as possible, where you can turn sideways, away from the flow of cars, and stand in a spot strong enough to support a jack. If you’re on a freeway and can’t get off, all you have to do is find the safest spot you can find. You cannot drive miles on a flat tire without destroying it and potentially damaging your vehicle. In this case, drive as far away from the road as possible on the right shoulder. Make sure you are standing on a firm, level surface so the jack does not sink into the ground instead of lifting the car. A soft surface can also cause the jack to tilt to one side when lifting the car, which can cause the car to fall.

Step 2: Secure your vehicle

Make sure the vehicle’s engine is off, it is in park and the parking brake is on. If you happen to have something to block a tire with (a brick, piece of wood, or large rock will do), place it under the tire on the opposite corner of the car from the corner you’re going to jack up ( e.g., jacking up the front right locks the left rear tire). This is another assurance that the car will not roll off the jack. If you have passengers, it’s a good idea to let them get off, but it’s not essential.

Step 3: Locate the jack and jack points

On most vehicles, the jack is stored in the trunk or in the trunk of an SUV under the load floor cover. After finding it, you need to locate the jack points on the body of the car where the jack will snap. The jacking points for most vehicles are reinforced metal ribs specially designed to safely raise the vehicle. There are four jacking points on most vehicles. They are located under the car’s sills, just behind the front wheels and just in front of the rear wheels. In the video above, our car and driver technician points to the right front jack point on the Hyundai Sonata sedan that we are about to lift. To be sure where the jacking points are for your vehicle, check your owner’s manual.

Step 4: Position the jack

Most jacks have a slot at the top of their engagement flange that slides onto the jack point’s reinforced rib – but your car may have a different setup, so check your owner’s manual to make sure you understand exactly how your jack works with the works lifting point. In the video above, our technician must first turn the jack down to fit under the car before beginning jacking.

Step 5: Jack up the car

Slowly turn the jack handle clockwise until the flat tire comes off the ground. Take your time and make sure the jack stays positioned straight up and down while lifting the car. You don’t want the jack to lean because it won’t hold the car securely that way. When jacking up the car to get under it, do some work, or change the oil, you must place a jack stand under the sill near the jack and attach it snugly to the car’s body. This will ensure that the car cannot fall on you in case the jack slips or fails altogether.

Getty Images

Safety note: If you’re jacking up the car to work on it at home, it’s a good idea to use a sturdier jack — the kind with the long handle you pump (pictured above). This type of jack is used in repair shops and in the pits at car races because it is much stronger and more stable than a car’s side jack. A jack stand placed in the correct position is shown below next to a jack (with the handle removed).

Getty Images

Step 6: Lower the car

When you are ready to lower the car, slowly rotate the jack handle in the opposite direction (counterclockwise) until the car’s tire is firmly in contact with the ground and you can remove the jack. Return the jack to its storage location, secure and you are almost good to go. But before you start the engine, don’t forget to remove anything you’ve used to lock a tire or you might think the parking brake is on when you try to pull away.

This content is created and maintained by a third party and imported to this page to help users provide their email addresses. You may find more information about this and similar content on piano.io

Posted by Josh• 9:49 am• Guides, Jacks

If you’ve ever wanted to change a tire or work safely under a car and forgot a jack, you may feel helpless.

Luckily, there are a number of ways you can jack up your car without the need for a jack.

Using a jack involves many risks and has resulted in serious injury and even death. [Source]

This guide will help you with some of those ways so you can change your wheels on the fly, or get under your car to do some auto repairs even if you forgot a jack.

How do I jack up a car without a jack?

Use of natural slopes

In an area where you’ll find raised ramps or even the curbs of footpaths in an urban area, you don’t need a jack.

Drive your car at an angle to the ramp so that one wheel of your car is lifted and you have the necessary height to work under the car.

Drive up at an angle if you want the rear wheels to lift, or you can reverse up the ramp at an angle so the front wheels will lift.

Watch the full video here:

digging earth underneath

Another option is to drive off-road where the ground is not concrete.

Park your car, apply the emergency brake and lock the wheels as usual.

To change tires, you can dig a hole under the tires to get the necessary height.

For this purpose, a shovel can be used to easily dig up the ground.

Continue digging until the axle rests firmly on the blocking material.

This will give you a satisfactory height to easily remove the hoop. Remove the wheel nuts and change your tire.

With pieces of wood / bricks

A cheap and inexpensive way to raise your car high enough to gain access to a lower portion of your car (without buying a jack) is to use chunks of natural, unprocessed wood.

You can stack these pieces and make a block of wood. Avoid using nails to stack the boards.

The reason for this is that nails will break the wooden planks and create a weak point in the middle which can cause the entire block to collapse under the weight of the car (you can use wood glue which will not affect the strength of the wooden blocks). .

Now drive up the car or manually push it onto the wooden block and you will get the desired height to change tires.

Similarly, you can use bricks or other flat boulders to elevate your car. Be sure to use a blocking/support material such as bricks or wooden planks to prevent the hoop from sliding off the platform you are creating.

Necessary precautions: After lifting the car, apply the emergency brakes or lock the wheels to prevent the wheels from rolling. The recommended way is that you do both. The wedge should be placed opposite the side you are lifting. People have lost their lives being crushed by their cars while working under them, so we recommend taking extra care to take all necessary precautions.

Additional information

Using a jack is still the most time efficient and easiest way to raise your car. While not the safest way to fix the car to work underneath, it’s still the easiest tool to get to the height required to change tires.

Park your car, apply the handbrakes and block/lock the wheels opposite the wheels to be jacked up to prevent rolling.

Place the jack under the vehicle frame closest to the wheel to be jacked up. There is a thin lip that runs along the side of the car and this is where the jack should be placed. If you’re still unsure of the safe spots to jack up your car, we recommend reading your owner’s manual.

With the jack in place, insert the handle according to the instructions on the jack and rotate/raise according to the markings on the jack.

Lower the jack when finished. Be careful and slow. First remove any car stands if you have used them before lowering the car with the jack.

Also Read: How to jack up a lifted truck?

Below are some alternatives to a traditional jack:

X Jack exhaust

QuickJack

Cattini lifting bags

AMI pneumatic pallet jack

Safe jack racing stand

Air hydraulic jacks

bladder lifter

Conclusion

There are a number of ways to jack up your car without a traditional jack.

You can of course use raised surfaces, embankments, curbs or footpaths as ramps to elevate your car on one side. You can even use a shovel or your bare hands to dig under the tire to reach the height required for a tire change.

Or if none of these are available, you can use flat rocks, bricks, or wood and build your own ramp to create the space needed to work under a car. Always take the necessary precautions to avoid fatal hazards.

(Visited 2,420 times, 1 visit today)

When you’re driving around and your Ford Fusion makes the telltale sound of a flat tire, you definitely don’t want to spend time looking for a spare tire. They just want to stop and fix the problem.

The newer Ford Fusion models don’t have a spare wheel? Models built before 2019 include a spare tire located in the cargo area. Lift the carpeted trunk to access the spare tire, jack, and tire wrench.

Do all Ford Fusions have a spare tire?

Unfortunately, not all Ford Fusions come with a spare tire. For example, the 2019 Ford Fusion comes with a spare tire while the 2020 Ford Fusion does not. So if you have a 2020 Ford Fusion, you don’t have a spare tire and you have to call a tow truck if you have a flat tire.

If your Ford Fusion did not have a spare wheel, there is no way to retrofit one. The good news is that you can buy a portable air compressor and sealant kit to fix flat tires. These kits are relatively inexpensive and easy to use.

You can also purchase a replacement tire directly from Ford. The cost of the spare tire varies depending on the Ford Fusion model you own. For example, the cost of a spare tire for a 2020 Ford Fusion is $200.

Why have Ford cars stopped having spare tires?

The main reason cars no longer have spare tires is that they are heavy and take up a lot of space. By doing without a spare wheel, cars are lighter and more economical in terms of fuel consumption. Also, many people never use their spare tires and just leave them in the trunk.

Another reason cars don’t come with spare tires anymore is that most people don’t know how to change a tire. With the advent of roadside assistance, it’s easier and cheaper to just call someone to come by and change your tire for you.

Fitting a spare tire to a Ford Fusion

While the newer Ford Fusion models don’t have spare tires, there is a place to store them. To install the part in the Ford Fusion, first open the trunk.

Then locate the spare tire and jack. The spare tire is usually located on the driver’s side of the trunk. Once you find the spare part, place it next to the car.

Next, locate the wheel wrench and remove the hubcap from the wheel. Once the wheel cap is off, use the wheel wrench to loosen the bolts on the wheel. Once the screws are loosened, remove them and keep them in a safe place.

Now you can remove the flat tire and replace it with the spare tire. After replacing the flat tire with the spare tire, you need to lower the car back to the ground. To do this, use the jack to slowly lower the car until the tire touches the ground.

Once the tire hits the ground, remove the jack and place it back in the trunk. Finally, use the wheel wrench to tighten the bolts on the wheel. Once the screws are tightened, replace the hubcap and close the trunk. And that’s it.

Ford Fusion tire size

Although tire size varies depending on Ford Fusion rims, most Ford Fusions are fitted with P215/60R16 tyres. These are all-season tires designed to offer a good balance of traction, handling and comfort.

There is also the tire size 225-50-17, which is also an all-season tire. This side is slightly wider than the P215/60R16 and offers better traction in wet and snowy conditions. However, it may sacrifice some comfort and handling.

The final tire size is 235/45R18. This is the largest tire that will fit on a Ford Fusion and it offers the best grip in all conditions. However, this comes at the cost of a rougher ride.

Can you put a spare tire on a Ford Fusion Hybrid?

No, you should not fit a spare tire on a Ford Fusion Hybrid. This is because the Ford Fusion Hybrid uses a different type of tire than the regular Ford Fusion.

The hybrid model uses low rolling resistance tires that are not meant to be driven for long periods of time. If you have a flat tire on a Ford Fusion Hybrid, you will need to call a tow truck.

What brand of tires does Ford use?

Ford vehicles use Goodyear and Michelin tires. Goodyear tires are known for their durability and Michelin tires are known for their ride quality.

You can usually find your car’s tire brand in the owner’s manual. If you cannot find the information in the owner’s manual, you can also look it up online or ask a Ford dealer.

How long do Ford Fusion tires last?

The lifespan of a Ford Fusion tire depends on the type of tire and how it is used. All-season tires typically last between 30,000 and 50,000 miles. However, if you use your car frequently off-road or in winter, your tires may not last as long.

It is important that you regularly check your tires for signs of wear. If you notice any bald spots or cracks, it’s time to replace your tires.

Does every spare tire fit every car?

No, not all spare tires fit all cars. The size and type of spare tire you need is specific to your car. For example, a Ford Fusion uses a different type of tire than a Honda Civic. Also, the size of the spare tire must match the size of the other tires on the car.

What is a donut spare tire?

A donut spare tire is a small, temporary spare tire intended to be used in the event of a flat tire. These tires are not intended to be ridden for any length of time and should only be used as a last resort.

If you have a flat tire and are using a donut spare, drive slowly and avoid freeways. Also, you should replace the donut spare with a regular sized tire as soon as possible.

What to do if you get a flat tire and don’t have a replacement?

If you have a flat tire and don’t have a replacement, your best bet is to call a tow truck. Roadside assistance can come and change your tire for you or take your car to a nearby gas station.

Attempting to drive with a flat tire is dangerous and can damage your car. If you get stranded without a spare tire, it’s best to wait for help.

Patching a flat tire

If you have a flat tire, it is best to take it to a nearby service station. They can patch the puncture in your tire and get you back on the road.

However, to do it yourself, first remove the tire from the car. Once the tire is off, use a tire patch kit to patch the puncture.

After patching the puncture, put the tire back on the car and inflate it to the correct pressure. Patching a flat tire is a temporary fix and is not intended as a permanent solution. You should still take your car to a gas station to get a new tire.

Conclusion

The Ford Fusion is a popular car known for its comfort and handling. Ford Fusion tires are an important part of the car and must be chosen carefully.

Ford Fusion spare tires are a great option for those who want the best traction in all conditions. We hope our article on ‘Does Ford Fusion have a spare tire? Where is it?” was helpful.

If you have any questions or would like to share your own experience, please leave a comment below.

Jerry works with some of the companies we write about. However, our content is written and reviewed by an independent team of editors and licensed insurance agents and is never influenced by our partnerships. Learn more about how we make money, view our editorial standards, refer to our data methodology, or view a list of our partners

Your Ford Fusion Hybrid came with either a spare tire or a tire repair kit. You can find one or the other in the trunk of your car, in a compartment under the floor. Simply pull up on the bottom tabs to reveal the trunk’s spare tire or repair kit compartment.

It’s not certain why Ford decided to give some Ford Fusion Hybrid model years a spare tire while others didn’t. Both the 2015 and 2019 model years came with spare tires, while all others have repair kits.

Super confusing right? That’s why Jerry, the world’s top rated auto insurance broker and super app, is here to hopefully solve some of the puzzles for you and help you use either the spare tire or the repair kit – whichever comes with your Fusion Hybrid was delivered. So let’s get right in, shall we?

RECOMMENDED Compare car insurance policies No spam or unwanted calls · No lengthy forms · Never fees

Does a Ford Fusion Hybrid have a spare tire?

The 2015 and 2019 Ford Fusion Hybrids came with a spare tire set located in the trunk and under the floorpan. But other model years before, in between and finally had tire repair kits instead.

There’s only one good way to find out what Ford has or hasn’t installed in your car: open your trunk, lift the floor panel, and see what you have. Checking the trunk is especially important if you bought the car used to see if you need to replace the tire or kit.

If your Ford Fusion Hybrid needs a replacement tire, Ford will sell you a replacement tire directly. Buying direct is a good idea if the old spare tire is in use, missing, or if you want to replace your repair kit with a full spare tire—this is a better and safer option than using an aftermarket part.

It’s also a good idea to invest in what can be a real lifesaver if you end up with a flat tyre. Roadside assistance that can be a real lifesaver in the event of a flat tire.

Using the Ford Fusion Hybrid spare tire or repair kit

If you have a spare tire for your Ford Fusion Hybrid, replace it like any other tire:

Stop as soon as safety allows. Try to stop on a level surface free of rocks and other debris

Remove your spare wheel kit from the trunk. The kit should include the spare tire and a jack

Jack up the car and remove the flat tire, then put on the spare tire

Tighten the lug nuts in a star pattern to ensure the tire is securely fastened to the car

Drive to a mechanic, dealer or tire shop immediately. Spare tires are intended for short-term emergencies. They are meant to take you safely to a professional who can replace your tire with a real one

If your Ford Fusion Hybrid came with a repair kit instead, you will need to follow slightly different steps:

Drive by safely. Find a flat, clean spot if you can

Remove the repair kit from your trunk where the spare tire would otherwise be located

Use the supplied lubricant around the puncture

Insert the repair tool into the tire and use it to plug the tire’s puncture, and then remove the tool

Cut the end of the tire plug so that it is level with the tread of your tire

Visit a mechanic, dealer or tire shop. Some patches last, some don’t. You want a professional to inspect the tire and determine if it needs a professional patch or replacement

The repair kit is not suitable for patching large punctures or damage to the sidewalls of tires. If the tire won’t hold pressure, you’ll need to call roadside assistance or claim your towing and labor insurance, if you have one.

RECOMMENDED Compare car insurance policies No spam or unwanted calls · No lengthy forms · Never fees

How to find affordable insurance for a Ford Fusion Hybrid

Replacing a tire can be expensive – some tires are over $100! Most mechanics will recommend replacing both tires on an axle when one is noticeably more worn than the other – so now you’ve got double the cost.

It would be pretty cool if you could save hundreds or even thousands of dollars a year on auto insurance to offset those expensive and always unexpected repairs, right? Yes you can!

Jerry is America’s #1 Top Rated Insurance App, helping millions of drivers save an average of over $800 a year by finding them. You could save enough in a single year to replace all four tires on your Ford Fusion Hybrid and buy a spare tire kit too! Super cheap car insurance. You could save enough to replace all four tires on your Ford Fusion Hybrid in a single year, buy a spare tire kit too!

Here’s how it works. You simply download the Jerry app and answer a handful of questions. Then give Jerry a few minutes to find great deals from top insurance providers.

Once you’ve selected your offer, Jerry will help you sign up from top to bottom without the need for phone calls or filling out paperwork. Jerry even cancels your old policy so you don’t have to. Switching and saving has never been so easy!

Don’t forget to check out our affordable and reliable roadside assistance too! Download Jerry today and give it a try. and

RECOMMENDED Thousands of customers have saved an average of $887/year on their auto insurance with Jerry. This app is great, but the customer service is even better! Not to mention convenient! My husband and I got the lowest price (much lower than the prices I found online through my own searches), fast and pretty much all via SMS! Thank you for a hassle-free experience👍 Gabriella R. Find Insurance Savings (100% Free) 4.7/5 rating on the App Store

frequently asked Questions

Please make sure this is the correct lug nut type for your wheels before ordering. If you have any questions, please contact us.