Are you looking for an answer to the topic “how to replace a outside tap“? We answer all your questions at the website Chewathai27.com/ppa in category: Aodaithanhmai.com.vn/ppa/blog. You will find the answer right below.
Table of Contents
How easy is it to replace an outdoor tap?
You don’t have to be a fully qualified plumber to replace a garden tap, you don’t even need to be particularly good at DIY. All you need are a few basic tools and materials that can be found on Amazon or your local B&Q, and to read through this quick and helpful guide.
Do you need a plumber to change taps?
Hiring a qualified plumber is the best option for replacing taps, particularly if your taps are leaking or a part has come loose. A plumber will do the job properly, saving you time and stress, whilst ensuring you don’t have to pay any extra from doing the job yourself and creating more damage.
How to Replace a Spigot Washer – Dripping Outside Tap (Bibcock)
Whether you’re renovating or your faucet just isn’t working efficiently, sometimes a faucet replacement is needed. Hiring a qualified plumber is the best option for faucet replacement, especially if your faucets are leaking or a part has come loose.
A plumber will get the job done properly, saving you time and stress while ensuring you don’t have to pay extra for doing the job yourself and causing more damage.
How can Local Heroes help?
A Local Heroes plumber can replace your kitchen faucets and bathroom faucets, be it a simple replacement of the same model or a completely new model e.g. B. with intelligent technology or extendable nozzles. Before starting work, our plumbers will assess your existing plumbing system and see if any changes need to be made to existing plumbing.
Local Heroes helps you find highly qualified plumbers in your area, saving you time looking for the right tradesman and offering you a choice of the experienced specialists instead. If you have other problems with your lines, no Local Hero is too far away.
Do I need a plumber?
Calling a plumber to replace your faucets is the best possible solution as it is not an easy task. For example, replacing a faucet when your sink is already installed can be a daunting task that requires experience, the right tools, and the right method.
How much do plumbers charge to change a tap UK?
Replacing sink taps – £112.5– £250 ( some charges VAT) + Material if needed. Replacing basin taps – £112.5– £250 ( some charges VAT) + Material if needed. Replacing a mixer tap costs –£112.5– £250( some charges VAT) + Material if needed. Replacing a bath tap– £112.5 – £250( some charges VAT) + Material if needed.
How to Replace a Spigot Washer – Dripping Outside Tap (Bibcock)
Here we give you an idea of how much the work will cost you. (only work):
Replacing kitchen sink taps – £112.5 – £250 (some charges VAT) + supplies if required.
Basin tap replacement – £112.5 – £250 (some charges VAT) + supplies if required.
Replacing a mixer tap costs – £112.5 – £250 (some charges VAT) + materials if required.
Replacing a bath tap – £112.5 – £250 (some charges VAT) + supplies if required.
Replacing a kitchen faucet costs – (some charges VAT) + materials if required.
When hiring a professional, it’s important that you choose the right style for your sink or garden. If you are not sure, you can ask the professional to visit you beforehand (usually for minor work like installing faucets, but there is no free estimate), but you can be 100% sure that you will have the faucet in the have the right size.
Unless you have experience in this area, it is best to hire a contractor to install the faucet.
2. Major components affecting installation cost
Even if you want to install an indoor kitchen faucet or an outdoor garden faucet, the installation cost will depend on a number of factors.
Access to the water source
The location of the faucet and pipes is very important. This gives us an idea of the length of the installation in order to provide you with an accurate quote.
location
If the plumber you hire is not on site, the quote may be higher. Using a local can save you money and support local installers.
materials
Obviously the cost is higher if the plumber has to provide the material.
City toll, horrendous parking fees
It’s a big issue in London. If congestion charges apply or the total parking cost is high, the handyman will add this to your final bill.
3. Different tap types and different locations
You already know your design, but it’s important to choose an appropriate faucet as well.
Mixer tap prices
Mixer taps are like floor standing faucets with 2 separate hot and cold water handles, but have the difference that they have one outlet. You will find them both in the kitchen and in the bathroom.
Monobloc faucet prices
It’s a very popular choice these days. Instead of regular handles, it only has one handle that allows you to control the temperature and water flow.
Garden tap prices
Garden faucets are typically found outdoors depending on the plumbing and water source.
Column bathroom faucet prices
Column taps are found in most UK bathrooms, with separate hot and cold water taps. They can also be found in the kitchen.
4. Sign if you need to change your faucet
What are the most common and obvious signs:
Your faucet is dripping
We all know that we’ve all ignored a dripping faucet at least once in our lives. However, it is a waste of water, money and annoying to listen to.
The handles are difficult to turn
Easily fixed with some lube. But sometimes it’s not the case. We recommend replacing it to avoid getting stuck permanently and leaving you running water.
Hammer
This can be caused by several issues.
It is best to bring in a qualified expert who will check this and advise you with the best solution.
Loud taps
A noisy faucet is a sign that the faucet is broken or will be broken soon.
5. How much does it cost to just remove the faucet?
As long as you can shut off the main water and have the right tools, you can do it yourself if you wish.
Calling in a plumber for this takes an hour, but is done professionally. Then he’ll tell you exactly what faucet you need, what size, and whether or not new plumbing is needed.
Tap Installation – Online Quote
We recommend obtaining a quote beforehand. Our Quote my Job feature is perfect for requesting a price for your work. MML Plumbing is your local expert if you are based in North London.
Our hourly rates for tap installation
Our prices are friendly compared to our competitors in North London. Our plumbing services are priced at £75/hour and include VAT. – The length depends on the complexity of the installation. The final price depends on the above factors. For more information on pricing, see our plumbing cost guide.
The question worries many homeowners
Can I install a faucet myself as a DIYer?
As long as you have plumbing experience and know what can go wrong and how to fix it when it does. Make sure you have the right tools, if not you need to buy them. If you must purchase please consider calling a professional as their tools will cost more than your labor to install the faucet would cost.
Why would outside tap stop working?
All outside taps have a one way valve inside them (or sometimes in the pipe). If you connect a hose to the tap then leave the end of the hose in a bucket of water it stops the water in the bucket being siphoned back into the water pipes in your house. Sometimes the valve will jam so no water comes out of the tap.
How to Replace a Spigot Washer – Dripping Outside Tap (Bibcock)
Can’t understand!
It worked until a week or 2 ago, a faint trickle now.
It’s coming from the wall of the house by the kitchen and more or less straight from the power grid (which you could normally use to cut concrete!). The mains power comes into the house under the kitchen sink, then one “half” goes to a) a filtered water faucet next to the sink and b) this outdoor faucet. The other “half” goes through the water softener (therefore part of the water is diverted for the drinking water in the kitchen and the outdoor garden tap, which only goes through the outside wall of the house).
I took a good look at all the inline faucets under the kitchen sink and they are all appropriately turned on or off. One thing is we got an airlock in the “system” when builders had to turn off the water (I assume!) 2 weeks ago to put in a radiator – which involved draining and refilling the CH system. I imagine that has something to do with the fact that we got a water hammer from using that outside faucet for a while – but just this little trickle now.
Why?!
Any solutions?
Why is my outside tap leaking?
If the faucet is leaking at the handle, use the adjustable wrench to tighten the packing nut (which is located right behind the faucet knob). Packing nuts usually get loose over time due to water pressure and other factors and can lead to leaks. Tightening it usually fixes the problem right away.
How to Replace a Spigot Washer – Dripping Outside Tap (Bibcock)
Luckily, fixing a leaking outdoor faucet is something you can easily do. Read on to learn how to get this project done in no time.
Gather the tools and materials you will need
Before you do anything else, make sure you have everything you need on hand. This way you don’t have to get up in the middle of the repair just to look for a forgotten tool. When fixing a leaking outdoor faucet, you’ll need an adjustable wrench, a flathead screwdriver, a small brush (or an old toothbrush), and plumbing tape. You can also buy a new washing machine in advance; If you’re not sure what size or type you need, ask your local hardware store if you can purchase a bag of assorted washers. Alternatively, you can wait until you’ve removed the old shim from the faucet so you can bring it with you to the hardware and purchase an exact replacement.
Identify where the leak is coming from
Check the faucet to see exactly where the water is coming out. Outdoor faucets typically leak in two places: the handle or the spout. Knowing the location of the leak is important as this will determine what to do next.
Turn off the main water supply
Before starting repairs, make sure the main water valve is closed. This way you can safely disassemble the faucet without fear of a water geyser rushing towards you!
Fix the leak
If the faucet is leaking at the handle, use the adjustable wrench to tighten the packing nut (located just behind the faucet knob). Packing nuts usually loosen over time due to water pressure and other factors and can cause leakage. Tightening usually fixes the problem immediately.
Unfortunately, things can get a bit complicated if the faucet is leaking at the outlet. If this is the case with your outdoor faucet, here are the steps you need to take:
1. Use the adjustable wrench to loosen the packing nut and remove the valve stem (which sits under the nut).
2. Take your flat head screwdriver and use it to remove the screw at the end of the valve.
3. When the screw is loose, carefully remove the old washer with the screwdriver.
4. Clean the washer seat with the brush to remove any stuck residue, and then install the new washer.
5. Replace the screw.
6. Place plumbing tape on the threads of the faucet to ensure a secure fit, then reinsert the valve. Be sure to tighten the packing nut with your adjustable wrench.
When you’re done with the repairs, turn the main water supply back on to see if the leak is still there. If this is the case, you need to call a professional plumber as soon as possible. That way you have someone who can troubleshoot your outside faucet and knows how to fix it quickly and easily.
Why would outside tap stop working?
All outside taps have a one way valve inside them (or sometimes in the pipe). If you connect a hose to the tap then leave the end of the hose in a bucket of water it stops the water in the bucket being siphoned back into the water pipes in your house. Sometimes the valve will jam so no water comes out of the tap.
How to Replace a Spigot Washer – Dripping Outside Tap (Bibcock)
Can’t understand!
It worked until a week or 2 ago, a faint trickle now.
It’s coming from the wall of the house by the kitchen and more or less straight from the power grid (which you could normally use to cut concrete!). The mains power comes into the house under the kitchen sink, then one “half” goes to a) a filtered water faucet next to the sink and b) this outdoor faucet. The other “half” goes through the water softener (therefore part of the water is diverted for the drinking water in the kitchen and the outdoor garden tap, which only goes through the outside wall of the house).
I took a good look at all the inline faucets under the kitchen sink and they are all appropriately turned on or off. One thing is we got an airlock in the “system” when builders had to turn off the water (I assume!) 2 weeks ago to put in a radiator – which involved draining and refilling the CH system. I imagine that has something to do with the fact that we got a water hammer from using that outside faucet for a while – but just this little trickle now.
Why?!
Any solutions?
Why has my outside tap lost pressure?
Check your hose
In many cases, outside water pressure can be influenced by something as simple as your hose. Check that there are no leaks or worn parts in your hose. A new hose, or making repairs to your existing hose, may be all that is needed to solve the problem.
How to Replace a Spigot Washer – Dripping Outside Tap (Bibcock)
When plants and flowers need to be watered, grass needs to be sprinkled, or pools and ponds need to be filled and kept clean, having adequate water pressure in the garden is essential to ensure the job gets done quickly and efficiently.
If you are new to the world of garden installation, this is where things can get a bit complicated.
No doubt you are asking yourself:
“How do I increase the water pressure in the garden? How do I check my main water valve? And what is a water butt pump anyway?!”
All questions that will likely overwhelm someone new to the plumbing world.
That’s why we’ve created this complete guide to increasing water pressure in your garden.
We’ll take you step-by-step through the world of garden water pressure and answer every question we’ve ever been asked about garden pumps so you can find the answer to your questions.
Here’s what you need to know…
What causes low water pressure in the garden?
When your outside water pressure is low, watering your garden or filling your pool on a sunny day can prove to be a time-consuming task.
In some cases, your water pressure may not be strong enough to reach the farthest parts of your yard.
Luckily, you don’t have to put up with low water pressure outside.
If you find the cause of low water pressure, you can easily solve the problem.
demand for water
As a first step, is there a pattern for the low water pressure? Does it happen all the time or only at certain times of the day?
Using water at peak times can affect the water pressure.
For example, mornings and evenings are more likely to have low water pressure when water needs are greatest.
Experiment to see if watering outdoors at different times of the day affects pressure.
Check your garden faucet
If only the garden faucet suffers from negative pressure and the pressure in the kitchen is sufficient, it is possible that the pipeline to the faucet or the garden faucet itself is slightly clogged.
Replacing the garden faucet with a new one might fix the problem, but please make sure you turn off the water at the main faucet before doing so.
The cost of a new faucet is approximately £10.
Check your hose
In many cases, outside water pressure can be affected by something as simple as your hose.
Check that your hose has no leaks or worn parts. A new hose or repairs to your existing hose may be enough to resolve the issue.
If your hose appears to be in good condition, perhaps the fitting at the end could be replaced. If it’s old or not providing you with adequate water pressure, a high-pressure spray attachment could make all the difference.
Make sure the hose is properly attached to the nozzle. No water should come out of the spigot. A corroded or damaged spigot can also affect the efficiency of your hose. If this is the case, you should consider fitting a new one.
Check the main water valve
It may seem obvious, but not turning the main water valve on all the way is a common mistake people make that can lead to low outdoor water pressure.
Locate your main water valve – this is usually located under your sink. Check if it is fully open. If you suspect the main water valve is damaged, please contact an installer immediately.
Check the water pressure regulator
Locate your water pressure regulator to see if it can be adjusted to increase water flow. This is often in the same location as your main shut-off valve. Identify the pressure rating (PSI) and if there is an option to change it.
In many cases, it may be necessary to call a plumber to increase the water pressure in your yard. This is especially the case if you want to make any adjustments to your pressure reducer. A plumber may also be able to offer suggestions and diagnose potential problems that may be affecting your water supply.
How do you increase the water pressure outside?
If your outside water pressure has not improved after the above checks, then you need to take further action.
Once you have thoroughly cleaned the garden faucet and checked that your mains water valve is open, low water pressure in the garden is usually caused by the mains water supply.
To fix low water pressure, these are some of the options available.
Note: You cannot connect a booster pump directly to the main water supply.
Buy a submersible water butt pump
Tired of the hose ban? Well luckily we have the tool that can solve all your problems. A submersible water butt pump is a type of jet pump that you simply place in a water butt, connect it to electricity and pump up to 37 liters of water per minute.
The tool is so much easier than filling a watering can, watering the flowers, always going back to the butt. Simply drop the submersible pump into the water butt, turn on the pump and water your garden. Easy.
Alternatively, you can switch the hose attachment to sprinkler.
Unfortunately the pump cannot handle solids larger than 3mm, so it may not be suitable for pumping pond or river water.
How much will that cost?
Cost – £49.00
Installation – self-installation
Buy a Stuart Turner Jet Boostamatic pump
Another option is Stuart Turner’s Jet Boostamatic pump. Designed for pumping clean, non-potable water, the portable jet pump is ideal for many household and light industrial applications including water pressurization and lawn sprinkler boosting. The fully automatic pressure/flow switching control makes the pump ideal for integration with a water butt.
This pump does not rely on gravity to activate, allowing it to work in both positive and negative systems.
How much will that cost?
Cost – £223.00
Installation – DIY for installing rain barrels, plumber for installing intermediate tanks
Install a rainwater harvesting system
Rainwater harvesting is the practice of collecting rainwater from surfaces such as roofs, gardens, and flooded areas before storing and filtering the water to make it suitable for human consumption or use.
Most rainwater harvesting systems use a system of rainwater harvesting equipment – tanks, pipes and pumps located either above or below ground. Most rainwater harvesting systems can be installed to water lawns or flower beds, and can even be connected directly to your garden faucet.
How much will that cost?
Cost – £0 – £2000
Installation – DIY/Contact a Plumber
Turn to anchor pumps
Pumps can be quite complicated, especially if this is your first time buying a pump.
There are many different types of outdoor water pumps that are suitable for specific applications. If you have a specific problem, please contact Anchor Pumps to find out how to increase water pressure in your garden.
Contact us on 0800 112 3134
We are open Monday to Friday: 07:00 – 17:30 and Saturday: 08:30 – 12:30
Looking for information on setting the water pressure? Read our full guide here.
HOW TO CHANGE A FAULTY OUTSIDE TAP – Plumbing Tips
See some more details on the topic how to replace a outside tap here:
How to Replace a Garden Tap
The right way to apply PTFE tape to a thread is to wrap it around it in an anti-clockwise direction. 6-8 turns should be enough, but make sure …
Source: www.gardentoolbox.co.uk
Date Published: 9/6/2022
View: 8429
How to Replace a Spigot Washer – Dripping Outside Tap …
Remove the old O-ring with a screwdriver. Try to get a new one with the same thickness, although a thicker or smaller diameter one may still …
Source: dengarden.com
Date Published: 5/19/2022
View: 2233
How To Replace a Leaking Hose Tap | #7 Step Guide
A tap repair like this is not an expensive job, unless you damage or twist the pipe work behind the wall. Moyle Plumbing service from Brisbane …
Source: www.moyleplumbing.com.au
Date Published: 9/20/2022
View: 5979
Which outside tap and how to replace? – Ultimate Handyman
My outse tap broke the other day. At least I think it d – it just started running water by itself and wouldn’t turn off. So we’ve had the …
Source: www.ultimatehandyman.co.uk
Date Published: 2/27/2021
View: 3011
How to Fit an Outside Tap – Complete 3-Step Guide
To replace an outse tap that you already have fitted, you need to isolate the water supply to the outse tap, …
Source: housewarm.co.uk
Date Published: 3/12/2022
View: 1070
How to Replace a Garden Tap
I’ve never heard a gardener say that having a garden faucet is unnecessary, but I’ve heard many complain about their own faucets. Any type of faucet will deteriorate over time, and it appears garden faucets are more prone to this. The reason could be that garden roosters are exposed to temperature changes and the rest of the elements, but I can’t say for sure.
Whatever the cause, if you have an outdoor faucet you will eventually have problems with it leaking, being stuck or something else, so it is in your best interest to learn how to replace a garden faucet. You don’t have to be a qualified plumber to replace a garden faucet, you don’t even have to be particularly good at DIY. All you need is a few basic tools and materials that you can find on Amazon or your local B&Q and read through this quick and helpful guide.
First things first: you must turn your water off at the main faucet, or your backyard will magically (not so) be transformed into your very own swimming pool once you remove the old faucet. After turning off the water supply, turn on your garden faucet to drain the remaining water.
Removing the old faucet can sometimes be a breeze, but more often than not it takes a fairly old piece of elbow grease to work loose. If the faucet is too stiff, you can either spray some lube in the area where the faucet connects to the pipe, or heat it slightly with a blowtorch, which will also expand and loosen it.
Also, after greasing or heating, you may need to use two adjustable wrenches, one to hold the tube in place while the other unscrews the faucet. Most garden faucets are unscrewed counter-clockwise.
If you remove the faucet completely, a little more water may spill out, but this is perfectly normal and nothing to worry about.
Once the faucet is out, you should use a hard-bristled toothbrush to scrub the inside of the pipe to remove any old teflon tape or other debris inside.
It’s important to get a new faucet that has the same design as the old one so that it fits in easily. Therefore, it is best to take the old faucet to your hardware store and show it there if you are not sure. If you are in the store be sure to purchase some PTFE tape, or Teflon/plumbing tape as it is also called. Armed with your shiny new faucet and duct tape, it’s time to go home and use them.
Check the fitting on your new faucet to see if it has a rubber or felt seal, and if it does, you may not need to use your PTFE tape. However, if your fitting is a male raw thread, you must use the tape.
The correct way to apply PTFE tape to a thread is to wrap it counter-clockwise around it. 6-8 turns should be enough, but make sure to leave a bit of the metal thread showing at the top as this makes it easier to bite down on the internal thread and screw it into the pipe. Crease or cut the tape, then run your thumb over the thread.
Now you need to screw the new tap into the pipe. Start doing this by hand so you can line it up better and make sure you don’t cross over. Once you get to the point where you can no longer turn the faucet by hand, take your adjustable wrenches and again use one to hold the pipe steady while the other is used to fully tighten the faucet.
How to Replace a Garden Tap
I’ve never heard a gardener say that having a garden faucet is unnecessary, but I’ve heard many complain about their own faucets. Any type of faucet will deteriorate over time, and it appears garden faucets are more prone to this. The reason could be that garden roosters are exposed to temperature changes and the rest of the elements, but I can’t say for sure.
Whatever the cause, if you have an outdoor faucet you will eventually have problems with it leaking, being stuck or something else, so it is in your best interest to learn how to replace a garden faucet. You don’t have to be a qualified plumber to replace a garden faucet, you don’t even have to be particularly good at DIY. All you need is a few basic tools and materials that you can find on Amazon or your local B&Q and read through this quick and helpful guide.
First things first: you must turn your water off at the main faucet, or your backyard will magically (not so) be transformed into your very own swimming pool once you remove the old faucet. After turning off the water supply, turn on your garden faucet to drain the remaining water.
Removing the old faucet can sometimes be a breeze, but more often than not it takes a fairly old piece of elbow grease to work loose. If the faucet is too stiff, you can either spray some lube in the area where the faucet connects to the pipe, or heat it slightly with a blowtorch, which will also expand and loosen it.
Also, after greasing or heating, you may need to use two adjustable wrenches, one to hold the tube in place while the other unscrews the faucet. Most garden faucets are unscrewed counter-clockwise.
If you remove the faucet completely, a little more water may spill out, but this is perfectly normal and nothing to worry about.
Once the faucet is out, you should use a hard-bristled toothbrush to scrub the inside of the pipe to remove any old teflon tape or other debris inside.
It’s important to get a new faucet that has the same design as the old one so that it fits in easily. Therefore, it is best to take the old faucet to your hardware store and show it there if you are not sure. If you are in the store be sure to purchase some PTFE tape, or Teflon/plumbing tape as it is also called. Armed with your shiny new faucet and duct tape, it’s time to go home and use them.
Check the fitting on your new faucet to see if it has a rubber or felt seal, and if it does, you may not need to use your PTFE tape. However, if your fitting is a male raw thread, you must use the tape.
The correct way to apply PTFE tape to a thread is to wrap it counter-clockwise around it. 6-8 turns should be enough, but make sure to leave a bit of the metal thread showing at the top as this makes it easier to bite down on the internal thread and screw it into the pipe. Crease or cut the tape, then run your thumb over the thread.
Now you need to screw the new tap into the pipe. Start doing this by hand so you can line it up better and make sure you don’t cross over. Once you get to the point where you can no longer turn the faucet by hand, take your adjustable wrenches and again use one to hold the pipe steady while the other is used to fully tighten the faucet.
How to Replace a Spigot Washer – Dripping Outside Tap (Bibcock)
Eugene is an engineer by training and a self-taught DIY enthusiast with almost 40 years of professional and DIY experience.
© Eugene Brennan
Leaking cone – how to fix it
Like any other faucet (also known as a faucet), a spigot has an internal washer that seals and shuts off flow when the spigot is twisted off. After thousands of on and off cycles, this washer eventually wears out and the result is a dripping spigot.
Luckily, this repair only requires a few tools, and a washer costs tens of cents. Probably the trickiest and most problematic part of the repair is unscrewing the top of the device.
knock mechanism. The black washer part threads onto a seat and blocks flow. Chabacano, CC BY SA 2.0 via Wikimedia Commons
Outside cock or bibcock. © Eugene Brennan
What is a faucet?
Depending on where you live in the world, this valve is known by different names. In the US, it is commonly referred to as a spigot, bibcock, bib, tube bib, outside or garden rooster, or silcock. In the UK and Ireland we call it an outside or garden faucet.
Pliers to hold the spigot body in place Wrench (wrench) or alternatively a second pair of pliers, water pump pliers or pipe wrenches (Stilsons) to remove the spigot upper body
Step 1. Identify where the water is coming from on the spigot
Journals leak either at the spout itself or around the stem (shaft) of the journal where it enters the packing nut (gland nut). If the latter is the case, it dribbles from this point on when switching on.
Step 2. Turn off the water
Locate the valve that shuts off the water to the faucet and close it. These are normally turned off by turning it clockwise. There are three common types:
slider. The handle must be turned continuously until it stops.
The handle must be turned continuously until it stops. Ball valve (quadrant valve). Rotate the lever 90 degrees. When the valve is off, the lever is usually perpendicular to the pipe.
Rotate the lever 90 degrees. When the valve is off, the lever is usually perpendicular to the pipe. Miniature in-line ball valve. These are often used to shut off flow to individual devices. Using a screwdriver, turn the screw 90 degrees clockwise so that it is perpendicular to the pipe.
Turn on the tap to drain water.
Gate valve – Turn fully clockwise to close © Eugene Brennan
Quadrant or ball valve. This is off when the handle is perpendicular or at 90 degrees to the pipe © Eugene Brennan
Miniature in-line valve that opens/closes with a screwdriver. Rotate it so the slot is at 90 degrees to the pipe.
Step 2 – Remove the head of the spigot
Attachment of the trunnion
Open the spigot a few turns. Use the clamps to hold the spigot valve body. A curved jaw vise will provide a better grip than a straight/straight jaw type. Alternatively, hold the stud body with water pump pliers. If you don’t hold the spigot body securely and have to use a great deal of force to loosen the top section or head, there is a good chance the mounting screws will be ripped out and the spigot pulled away from the wall or wood to which it is mounted becomes.
You can use either a wrench, Stilsons (pipe wrench), or water pump pliers to remove the faucet head. The head is removed counterclockwise.
Remove the head. Ideally, you’re also holding onto the body to hold it in place, © Eugene Brennan
Left to right – Wrench, Stilsons, water pump pliers. Either can be used to remove the faucet head © Eugene Brennan
If the head is stuck and difficult to unscrew, try heating the lower part of the spigot with boiling water. This usually works because it stretches the brass body enough to lessen its grip. It is important to only heat the lower body of the cone. If you pour boiling water over both parts, the two sections will expand and defeat the purpose.
You can also try tapping the wrench with a light hammer. This can be tricky (a third hand would be useful to hold the vise grips, but your gut might do!). A second straight-jaw vise is useful if you must do this.
If you can’t remove the head, try hot water. This causes the lower metal body of the spigot to expand and loosen its grip. Only pour water on the bottom half, not the head © Eugene Brennan
Gently tap if head is still difficult to remove © Eugene Brennan
A second vise comes in handy © Eugene Brennan
Head removed from spigot. © Eugene Brennan
The washer seals against the edge of the hole in the trunnion (referred to as the valve seat) © Eugene Brennan
Step 3. Remove the old washer
This is often retained with a “mushroom-like” projection or lug extending from the “jumper” or flange portion. Alternatively, a nut is used to hold the washer.
Worn washer © Eugene Brennan
Worn washer © Eugene Brennan
This flanged piece is called a “jumper” and has a mushroom shaped lug (or nut) in the center to hold the washer © Eugene Brennan
Step 4. Attach the new washer
You will need a 3/4″ or 20mm diameter washer for a 1/2″ stud.
Use your thumbs and nails to press the washer into place.
Push the new washer in place with your thumbs © Eugene Brennan
New washer installed © Eugene Brennan
Step 5. Smear a little petroleum jelly on the threads and put the head back in place
Some petroleum jelly will make it easier to remove the head next time.
Smear a little Vaseline on the threads © Eugene Brennan
Water leaks from the spindle of a spigot
Sometimes a trunnion can leak where the shaft or spindle enters the head. If this is the case, you will need to replace the packing nut washer. This is held in place by the packing nut screwed into the head. Use the same steps above to loosen this nut and you should be able to purchase a replacement from a plumbing supplier or any good home goods store. A solution that may also work is to wrap PTFE tape around the spindle and press it down into the cavity in the head nut. Then replace the packing nut.
If the faucet is still leaking……
The valve seat may be worn. This is the part in the spigot that the washer pushes against to stop the flow. This can be reground flat with a valve adjustment tool. While this option could be considered for faucets on sinks, bathtubs, and sinks, which are more difficult and cumbersome to replace, buying a tool to re-sharpen an outside faucet isn’t worth it. These are relatively cheap compared to their chrome interior counterparts and easy to swap out.
Amazon’s Choice for “Replacement Bib with Sharkbite Attachment”.
If you need to replace your garden faucet, this is Amazon’s choice for an outdoor faucet with Sharkbite fittings. The 3/4″ GHT – 1/2″ NPT Bibcock can be quickly connected by anyone without plumbing skills as it features a Sharkbite barbed fitting for use with copper, PEX, CPVC, PE-RT or HDPE tubing has. So no wrenches are needed. Simply cut the tube square and slide it into the bib. You also need a double non-return valve that is switched into the supply line to the tap to prevent dirty water from e.g. a connected hose that flows back into your house supply. This is usually located indoors in the supply line.
hose bib or garden faucet. Amazon
Repairing a leaking hose connection
If your hose has a fitting like the one below, the o-ring in the coupler can wear out over time.
Remove the old o-ring with a screwdriver. Try to get a new one of the same thickness, although a thicker or smaller diameter can still work. Press the new ring into place with your thumbs, making sure it is fully seated in the groove.
A leaking hose connection is caused by a worn o-ring © Eugene Brennan
O-rings wear out over time and crack, causing leakage © Eugene Brennan
O-ring © Eugene Brennan
Use a screwdriver to remove the old o-ring © Eugene Brennan
Care of hoses in winter
In winter, after turning off the tap/tap, turn the spray nozzle back on and drain the water from the hose. You won’t get all of the water out, but it can leave enough air space in the hose for the water to expand and help prevent bursting in very cold weather. If the spray nozzle hangs down and is off, water can collect in it and freeze, causing the fitting to break. This has happened to me a few times. So leave it on to allow the water to drain. See photo below.
This spray nozzle cracked from being turned off in freezing weather © Eugene Brennan
Simple TapSplitter
If you don’t want to fiddle with wrenches, a novel product available on Amazon UK from ABD Tools makes it easy to safely remove even the most stubborn tab head. The “Easy Tapsplitter” tool is supplied as a set and is suitable for all threaded nuts. See link below:
Easy Tapsplitter Image courtesy of ABD Tools UK
This article is accurate and truthful to the best of the author’s knowledge. The content is for informational or entertainment purposes only and is not a substitute for personal or professional advice on any business, financial, legal or technical matter.
Answer questions
Question: What washer do I need for a garden faucet?
Answer: Usually a 3/4″ / 20mm washer. However, if you remove the top of the faucet you can easily measure the diameter.
Question: How do I get the assembly out of my trunnion washer? I removed and unscrewed the handle, but the assembly will not come out of the spigot.
Answer: If the part holding the water has come loose and got stuck in the spigot, grab it with needle nose pliers and you may be able to pull it out.
© 2015 Eugen Brennan
Josh on April 29, 2020:
Great help thanks! Save fortunes by calling a plumber!
Paula on July 11, 2018:
Thank you for your very helpful and simple guide.
Steve on October 23, 2017:
one of the best visual explanations I’ve seen, thanks
Nigel Tupman on June 4, 2016:
Great pictorial explanation – made the job ten times easier. top grades!
CB on 05/02/2016:
Brill a great help here in the UK. Thanks!
Eugene Brennan (Author) from Ireland on June 01, 2015:
Thank you MG!
MG Seltzer from South Portland, Maine on June 01, 2015:
Many Thanks. I appreciate the details and the clear photos. Voted.
Eugene Brennan (author) from Ireland on May 23, 2015:
Thanks Lukas, glad it was of use!
Luke McCoy from California on May 20, 2015:
Nice picture article, it really helped me, I was thinking of calling a plumber to stop the dripping from the spigot, but now I think I can do it manually without help, but first I think I need a first need to buy washing machine. Anyway, thanks for the article, I really appreciate the way it’s done.
Related searches to how to replace a outside tap
Information related to the topic how to replace a outside tap
Here are the search results of the thread how to replace a outside tap from Bing. You can read more if you want.
You have just come across an article on the topic how to replace a outside tap. If you found this article useful, please share it. Thank you very much.
