Are you looking for an answer to the topic “how to secure porch swing from wind“? We answer all your questions at the website Chewathai27.com/ppa in category: Aodaithanhmai.com.vn/ppa/blog. You will find the answer right below.
Table of Contents
How do you stop a porch swing swinging in the wind?
We hung a porch swing on our porch and used a bungee cord to secure it to the deck railing to prevent it from banging around in the wind.
How heavy can a porch swing be?
On average, porch swings have a maximum weight capacity of 550lbs (250kg). This number is directly linked to the strength of the chains, and the majority are rated at this number. You can purchase stronger chains at a hardware store, which will allow you to increase the weight capacity of your swing.
Can my porch support a swing?
A porch swing can indeed be hung underneath a deck as long as it is done correctly. The swing’s bolts must be secured to the deck’s joists/ceiling joists to be fully secure. An adequate amount of swinging room will need to be created both for safety reasons and swinging efficiency.
How do I know if my porch can safely hold a swing?
A porch swing can actually be hung under a patio as long as it’s done right. The swing bolts must be attached to the joists/ceiling joists of the deck to be fully secure. Sufficient swing space must be provided for both safety and swing efficiency reasons.
If you want to learn more about where to put a hammock swing (other than a porch, of course), you’ve come to the right place!
Read on to learn how to install one under your deck and the pros and cons of doing so. Hopefully you can decide what is best for you, your home, and your swing seat!
Installation of a porch swing under the deck
Whether you are mounting a porch swing under the deck or on the porch, you will need to take similar steps. You also need to consider similar factors when hanging. We’ve written extensively about these factors in our collection of swing chair articles here.
First, find where the ceiling joists are. As previously mentioned, the bars are where you will find the most support and security for your swing. 2×8, 2×6, or three 2×4 beams should be enough to support any average two-person porch swing.
Once you’ve found these beams, please make sure they have enough support on both ends. The last thing you need is for inadequately supported joists to be damaged by too much weight and stress.
Not only will this damage your deck and swing, but it could also prove to be a safety hazard. Don’t skimp on support and security!
Porch Swing Hardware
Next, you’ll need to purchase either chains or rope rated at least 500 pounds (if not more – we’ve written all about how much weight a swing seat can support in this article). This ensures that pretty much anyone can sit safely on the swing without fear of falling. You will also need to purchase hooks, eyebolts or eyebolts to mount them to the ceiling joists. If you are unsure of the size/length you need, speak to a professional.
You can even buy something called a hanger kit that includes lag bolts and swivel hanger mounts. This will surely make the assembly process easier! We also wrote about the best hardware for hanging a porch swing here.
Elderly couple smiling and looking at camera on porch
Measurement
You want to measure for the oscillating chamber! The last thing you want is to be pounding on your home or facility while perched on your porch swing. This quickly becomes irritating and is not good for the swing set or your house.
As a general rule, it’s best to have at least 14 to 16 inches of clearance and 48 inches of swing space on either side of the swing. They should also have a ground clearance of 17-19 inches, so plan accordingly when buying/measuring your rope or chains.
Since you’ve already located the ceiling joists, it’s time to start installing them! Install the eyebolts (or hooks), then your chains (or ropes), and finally the swing. Make sure it’s secure and again make sure your beams can support the weight so accidents don’t happen.
The next and final step is to take a break and ride your new swing! Visit HomeDepot.com for a more detailed step-by-step guide
Different types of hammock swings
As mentioned before, you need to know what type of swing chair you want before you start installing it. Let’s take a look at a few different types of swings!
First of all, we have wooden swings. Basically, the biggest disadvantage of a wooden swing is the fact that it requires some maintenance as wood can rot and splinter or discolor in the sun (cedar is the best choice as we wrote here). Otherwise you just can’t go wrong!
Wooden swings probably have the widest range of styles and designs to choose from. You can choose anything from rustic to farmhouse, and even then the swing can be stained or painted to match your home.
Metal swings are also a great thing! These are quite durable and can withstand all kinds of stress. The only problem is that metal can get very hot in the sun, meaning the swing may not be as comfortable to use in the summer months. Otherwise it’s a good choice! Because metal doesn’t break easily, you can choose a much more elaborate and delicate design for your swing.
Adirondack or polywood swings are also becoming increasingly popular. Adirondack furniture is made from high-density polyethylene (HDPE), the largest component of which is recycled plastic and cardboard. This material will not deteriorate under chemicals, water or even heat. It takes a lot to damage these swings, so many people choose them, especially since their color doesn’t usually fade over time.
The only downside is that they are super expensive!
Young woman texting and sitting on porch
If you prefer a more classic style and look, you can always opt for the timeless wicker swing. Wicker is one of the most comfortable options listed here as it can flex slightly when seated and therefore conforms better to your body shape.
Wicker can usually withstand with the right care and should last for several years. The only downside to a basket swing is that it probably requires more maintenance than any other swing out there, or at least more attention.
You really can’t leave a wicker swing outside all year round as temperature and weather have a huge impact on it. It is recommended that you either bring it inside (particularly during the cold months and when damp) or cover it up if the weather is not comfortable.
If you’re diligent at this, you should have a nice swing on your hands for years! To learn more about and buy porch swings, click here!
How far off the ground should a porch swing be?
An ideal place would have 3 to 4 feet of empty space fore and aft of the swing and at least 14 inches of clearance on each side. The swing should hang at least 17 inches from the floor so the average occupant’s feet can touch the floor.
How do I know if my porch can safely hold a swing?
Choose a size and place.
A hammock swing can be a hanging chair for one person, or it can be wide enough to accommodate multiple people. A 4-foot swing comfortably seats two adults, but there are also swings in 6- and 8-foot lengths. Decide how many people will typically pile on it at one time and allow 2 feet per person.
For placement, find a spot under a sturdy beam or joist that allows for an arc — the distance the swing travels back and forth — of no less than 4 feet. An ideal location would have 3 to 4 feet of clear space in front of and behind the swing and at least 14 inches of clear space on each side. The swing should hang at least 17 inches off the ground to allow the average resident’s feet to touch the ground.
Also consider the view. If you’re admiring your front yard and want to give your neighbors a light wave, position the swing so it’s facing forward. If you prefer a more private space for reading, contemplating, and intimate conversations, consider orienting the swing sideways.
Need help? Receive free, no-obligation project estimates from qualified professionals in your area. Find professionals now +
Think structure and security.
The beam or beam that supports the swing’s hardware—and the fasteners themselves—must be strong enough to support at least 500 pounds. Never mount swing supports in something as thin as plywood or beadboard. A single supporting 2×6 beam or beam can support a two person swing, but a 2×8 is even stronger.
A porch swing hanger kit comes with the correct hardware; If you’re assembling the hardware yourself, though, make sure it’s made of galvanized or stainless steel to withstand the elements. If you are using rope instead of chain, it should be braided marine-grade nylon or polyester.
Familiarize yourself with the installation.
Swingarms hang from either two-chain or four-chain suspension systems. The former design has a chain on each side that branches into two separate chains that attach to the front and back of the armrest. Others use four separate chains; The fasteners on each side support two separate chains – one that connects to the front of the swing and one that connects to the back or bottom.
advertisement
You also have a choice when it comes to the fasteners. Purpose built porch swing hangers include a base, hook and comfort spring. Or you can use eye bolts or S hooks with 4″ to 6″ shanks. Install the fasteners at each end 2 to 4 inches wider than the length of the swing to prevent the chains from rubbing against the swing and to better distribute the weight. When installing the fasteners, drill a pilot hole slightly smaller than the hardware for a snug, secure fit.
No porch? No problem!
You can also be a swinger if your porch beams or beams aren’t enough. Just hang a porch swing from a freestanding frame, or turn to that trusty oak or other hardwood tree with a thick, strong, healthy branch. Loop each chain around the link and secure with a large, weatherproof pin. To protect the branch from abrasion, wrap a rubber hose around the chain where it wraps around the branch.
Check your swing at least once a year. Inspect the seat for chips or loose parts and repair. Also, replace any fasteners that appear rusty or worn. But now sit back and relax!
How do you install an anchor for a swing set?
Attach an anchor to the drill and drill it into the ground. If this isn’t possible, place a screwdriver or small metal bar through the head of the anchor. This will help you twist the anchor into the ground. When installing each anchor, make sure they remain perpendicular to the surface of the ground.
How do I know if my porch can safely hold a swing?
Stake Ground Anchors and Swivel Ground Anchors are good alternatives to concrete when anchoring a non-concrete swing set.
If you’re looking to increase the fun factor in your backyard, you may have thought about adding play equipment. Not only are swings a sure hit, they’re a great source of exercise and entertainment for your kids.
However, installing a swing correctly is of paramount importance. A wobbly swing is a safety hazard. Concrete is the most common way to anchor a swing.
But if you don’t want to deal with the hassle and mess of wet concrete, you can choose a different method to anchor your swing. How to Anchor a Swing Without Concrete, presented by Jerry
Let Jerry Find Your Price In Just 45 Seconds No Spam No Long Forms No Fees Find Insurance Savings (100% Free)
Place your swing
So you’ve built or bought a swing, and now it’s time to install it in your backyard.
The first thing you need to do is find a flat area, free of obstacles, 8 feet in front of and 8 feet behind the swing. This way your children can play safely without fear of climbing into a fence or patio.
The ground under the playset is solid and cannot be flooded when it rains. You might even consider putting one in. It’s also important to make sure that it’s underneath the playset and doesn’t get flooded when it rains. You can even consider adding a protective pad under the swing to cushion potential falls and protect your lawn from wear and tear.
Types of Ground Anchors
The most important step in installing your swing is making sure it is properly anchored. Solid anchors prevent the swing from tipping over and causing serious injury. While you can use concrete for this task, ground anchors are easier and less expensive.
Here are the different types of ground anchors to consider for your swing set:
Post Ground Anchors: Post ground anchors are metal stakes that you drive into the ground. Once in place, attach the legs of the swing to the stakes with screws.
Rotating Ground Anchors: Rotating Ground Anchors are similar to stakes, but instead of hammering them in with a hammer, you twist them into the ground. Once they are firmly in the ground, attach them to the legs of the swing with screws.
How to anchor a swing with ground anchors
Once you’ve found a solid, flat area with no obstructions to install your swing, it’s time to anchor it to the ground. For this process you will need the following tools and materials:
Plastic or wooden ground spikes
A hammer
A drill
A screwdriver or a small metal rod
Ground anchor (standing or rotating anchor)
Screws, bolts and additional fasteners
Once you’ve gathered all the necessary materials, it’s time to set the anchors in the ground. Follow the steps below to properly anchor your swing.
Step 1: Determine where to place the anchors. First mark the area where you want to place the swing. The easiest way is to place the swing in the designated spot and mark where the legs fall by driving stakes into the ground. Move the swing aside.
Step 2: Install the anchors. Attach an anchor to the drill and drive it into the ground. If this is not possible, insert a screwdriver or a small metal rod through the anchor head. This will help you turn the anchor into the ground.
As you install each anchor, make sure they remain perpendicular to the ground surface. A slight angle is fine if you don’t have room to install the anchor vertically.
Make sure enough of the top of the anchor is sticking out of the ground to attach it to the swing leg. Repeat the process until all anchors are attached.
Step 3: Reposition the swing: With all the anchors in place, reposition the swing. The anchors should be in line with the legs.
Step 4: Attach the Anchors to the Legs of the Swing: Next, attach the anchors to the legs of the swing. How you attach the legs will depend on your specific swing set, but usually via a bracket, wire, chain, or other hardware.
Step 5: Make Sure the Fasteners are Secure: Double check that the anchors are secure. Test the swing yourself before letting children play on it to make sure the swing doesn’t wobble. Happy swinging!
How do you make a swing set more sturdy?
Use steel mending plates and L-brackets to reinforce weak joints. Place them underneath cross-members, like the top bar and horizontal bars in the A-frame ends of the swing set. Use galvanized hardware and heavy-duty treated deck screws to attach the brackets to ensure the braces will last.
How do I know if my porch can safely hold a swing?
Wooden swings and other play equipment often become wobbly with regular play, long before they have lived up to their usefulness. Random bracing and repairs can do more harm than good. Adding proper braces can add years to the usefulness of your swing set. If possible, use the same type of wood that the frame is made of, as it will take on the same color as the original swing when exposed to the elements.
advertisement
video of the day
hardware replacement
Tighten any loose screws and bolts with a cordless drill or socket wrench. Remove pieces of iron that rotate in the wood as the threads are stripped. Take the original hardware with you for comparison and buy slightly thicker and longer bolts or screws than the originals. Replace the old hardware with them. This goes a long way in helping to brace the swing and align the pieces properly.
advertisement
add brackets
Use sheet steel and L-brackets to strengthen weak joints. Place them under cross members, such as the top bar and horizontal bars, in the A-frame ends of the swing set. Use zinc plated hardware and heavy duty treated deck screws to attach the brackets to ensure the struts will last. Use as long screws as possible to make the connections as strong as possible.
advertisement
diagonal bracing
Cut 45 degree miters on the ends of 2 x 4 pieces of wood long enough to stiffen the corners of the top bar. Pre-drill the wood braces with a 1/8-inch drill bit. Use 3-inch treated deck screws to attach the braces to the side frames of the swing and the other side of the top bar to stiffen the frame tightly. Lower the bolts so that the heads are flush with the surface of the struts just below. Use at least two screws on each end of each strut.
advertisement
lower frame
Cut treated wood or cedar to fit between the front and back legs of the swing. Place the braces between the legs and drill the legs into the ends of the wooden braces from the outside. Drive long lag screws through the outside of the legs into the ends of the wood braces to tighten them. Fill the space between the braces with sand or coarse gravel to make the swing safer in the event of a fall and to add stability to the brace.
Do wooden swing sets need to be anchored?
When installing any swing set, you should anchor the equipment into the ground to prevent it from flipping over while in use. Concrete anchors are the most secure.
How do I know if my porch can safely hold a swing?
\u00a9 2022 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder Owner of this image under US and international copyright laws This image is not licensed under the Creative Commons license which applies to text content and some other images posted on the wikiHow site. This image may not be used by any other company without the express written consent of wikiHow, Inc.
<\/p>
<\/p><\/div>“}
Will a 4×4 hold a porch swing?
Whether hanging a traditional two-person swing or a larger swing bed, you’ll need a 2×8 joist or 4×4 beam. If your joists aren’t deep enough to support a porch swing, you can reinforce them with 4x4s using these instructions from Home Depot.
How do I know if my porch can safely hold a swing?
We often think of porch swings in front of our homes where you can see all the happenings in the neighborhood, but that doesn’t have to be the case. If you want more privacy or the view is better, the backyard might be a better option.
Whatever you choose, just make sure your porch beams and joists can safely support the weight of the swing and its occupants. Much like you need a structurally sound door frame to add security to your home, you need joists free from rot, cracks, and other damage to securely anchor your swing seat.
Whether you’re hanging a traditional two-person swing or a larger swing bed, you’ll need a 2×8 beam or a 4×4 beam. If your joists aren’t deep enough to support a porch swing, you can reinforce them with 4x4s using these instructions from Home Depot.
Also consider whether you want to look to the courtyard or inward. Hang your swing perpendicular to the street or yard to increase your privacy. Regardless of which direction you face, you can always create outdoor privacy with porch curtains or screens, as we see below.
How many pounds can a swing hold?
The vast majority of playsets today have a maximum capacity of 250 lbs. Any adult who fit within this range can enjoy their swing sets just as much as the children. In fact, swinging on a swing is highly recommended as a stress relief method!
How do I know if my porch can safely hold a swing?
A wooden swing is an important part of childhood fun and imagination. It is a place where creativity can flourish and social skills can flourish. With proper use, your play set can last for decades, which is why it’s so important to know the limits of your swing set. See what your jungle gym can really do and learn to avoid the things it just can’t do.
Maximize your gaming potential
Obviously, different playsets can handle different tasks. The larger the swing, the more capabilities it has and the more weight, pressure, and action it can handle. Things that affect the functionality of your outdoor playset include:
Fort Size: While most yard play equipment you’ll find on the market comes with 4ft forts, this is pretty stifling for older kids. Purchasing a jungle gym with a 5-foot fort deck or larger maximizes the fun potential and ensures your kids can continue to enjoy their backyard set as they grow.
Swing Accessories: Another size-related area of your swing is the accessories department. Again, smaller accessories will only hold their attention for so long. After that, the kids get bored and move on to bigger (literally) and better toys.
So larger sets can handle more kids, older kids, bigger kids, and more fun!
weight restrictions
While we’re all for adults who enjoy their swing purchase with their kids, even durable wooden playsets have their limitations. The vast majority of today’s playsets have a maximum capacity of 250 lbs. Any adult that fits in this space can enjoy their swing as much as the kids. In fact, rocking on a swing set is highly recommended as a stress-relieving method!
[Note: This does not account for changes that innovative parents may have made to the design; for example replacing the chains and mounting hooks with sturdier hardware to allow for greater weight capacity.]Can’t touch that
Here are a few pointers on what not to do if you want your outdoor play equipment to last the 20+ years it can:
DO NOT allow more than the recommended capacity
Swing sets come with instructions, and like anything you buy, your play set will perform at its best if you follow the recommendations. See how many kids a playset is designed to hold and don’t exceed that limit. You’re only damaging your swing set (not to mention a potential safety hazard) by overloading the wooden playhouse with extra weight it can’t handle.
That being said, the most durable swings will be able to withstand all the weight and pressure your kids can dish out.
Don’t get water, water everywhere
Metal and wooden swings can generally handle a small amount of water, including the normal rain, a water fight, and the nighttime dew drop. This is especially true if you’ve maintained your playset with an annual shift of sealing.
However, frequent and prolonged contact with water will damage even the most durable swings. Avoid excessive water play around backyard playground equipment and mop up pools of water. Sitting in water on a wooden playset is a death sentence for the integrity of the structure.
DO NOT convert a residential swing into a commercial one
Although these sets are built to last, they need to be treated properly. Swings intended for private use cannot withstand commercial use such as in a public playground or park. Use the kids play equipment for what it was designed for and you shouldn’t run into any problems.
Your dream playset awaits, so read some essential swing set safety tips, then give your kids the gift of a lifetime – get your free copy of the complete guide to swing set safety now!
We are in:
What is the weight limit for most swings?
Most baby swings have an upper weight limit of 20 or 25 pounds. The manufacturers usually say that you should stop using it before they reach that limit if they start climbing out of the swing.
How do I know if my porch can safely hold a swing?
Most of the advice you can get for finding a good swing for big babies revolves around one thing – weight capacity.
I’ll be blunt – anyone can just give you a list of swings with a 30 pound weight capacity instead of 20 or 25. That’s nowhere near enough.
You need a more nuanced approach to make a good choice. You need someone to tell you which 30-pound swings aren’t great choices because small seats or short straps challenge the high weight limit.
I hope to be that someone. I’ve reviewed baby gear for years and I know my stuff (he said without modesty).
Anyway… I picked three swings for you, plus a great alternative:
One of them is called the best overall due to the highest weight limit paired with a roomy seat and a vibrating unit.
The runner-up is a high-end swing and its main benefit is a fully adjustable seat with no fixed inclines.
The third swing is the lightest of the bunch but still has the largest footprint, making it more stable for fussy big babies.
Let’s take a close look at each one.
Best baby swings for big babies
Mini reviews of the best swings for big babies
In the section below you can see the mini reviews of my top picks.
For the sake of clarity, I’ll briefly explain what’s what here so that you can easily find your way around.
In each product section I want to do three things:
Point out the main benefit/advantage of the baby swing. List the characteristics that make the baby swing (both physical and functional). Highlight the few things I like about it – both in terms of being good for bigger babies and overall
Keep in mind that I’m skipping over some general quality issues (like materials). That’s because there are fundamental qualities implied at this level of curated products and I’d just waste your time pondering them.
It would also make for a boring read, and nobody wants that.
Graco DuetSoothe – Overall the best swing for big babies
Swing Specifications
Specification / Full Name Graco DuetSoothe Size (in inches) 30.8 x 24.5 x 36 Weight (in lbs) 17.9 Weight Limit (in lbs) 30 Preloaded Sounds 15 Bluetooth Connectivity no Vibration yes Number of pan speeds 6
Main advantage – highest resilience paired with stability
Graco DuetSoothe is the only swing in the top 3 with a 30lb weight capacity (everyone else has 25lbs).
The other 30lb capacity swing in my top 5 is also from Graco (the Glider LX). In my opinion the Glider LX is not as suitable for large babies as the DuetSoothe due to the smaller footprint.
DuetSoothe combines a high maximum weight limit with a wide frame, which inspires more confidence (in terms of stability) when you’re a parent of a big baby.
Features of the Graco DuetSoothe
The swing seat is removable and can be used as a seesaw
Nature sounds and music – 15 in total
Suspended Design – Allows from three pan directions
Adjustable speed – choose one of six intensities
Vibration – two modes (speeds)
The extra padded baby seat is comfortable for larger babies
Safe five-point harness
What makes it the best baby swing in the large/tall category
I’ve already emphasized what sets it apart – the highest resilience and a wide, stable frame. Below are some of the other features that I love.
Budget friendly compared to other top swings
Price change and I can’t be exact here. But I can say that the average price of the DuetSoothe over the last few years has been around 30-50% lower than most high end swings.
The fact that it is a simple metal frame and not a robust plastic case plays a role, but functionally the differences hardly justify the additional price.
Vibration for extra reassurance
This is the only swing in the top 3 that includes a vibration unit.
If you have a bigger baby who is also fussy and restless, you need a vibrating swing. There’s solid, undeniable evidence that vibration actually helps calm the little daredevils. It also keeps baby calm, helps with colic and promotes healthy baby sleep.
The numbers are staggering and show that almost all babies (big or small, small or large) respond well to vibration (source).
The detachable swing seat makes it portable
This is crucial when you are alone in the house and need to do chores while keeping an eye on your baby.
For bigger babies, moving a beefy swing isn’t really an option. That’s why the option to take the seat out of the swing and take it with you makes all the difference.
Mains or battery operated
Most swings in this price range come with two options – you get an AC adapter or you get a battery case.
That’s a problem in either scenario — batteries tend to drain quickly, and swapping them out only adds to the thousand things you need to get done in a day, and a power cord limits where you can put the swing.
This Graco intelligently offers both. When consuming electricity, the swing will pay for itself over its lifetime in battery savings (calculated based on two hours of use per day).
4Moms Mamaroo – Best premium baby swing for big and heavy babies
Specifications of the Mamaroo
Specification / Full Name 4moms MamaRoo 4 Multi-Motion Height (in inches) 19.5 x 25.5 x 33 Weight (in lbs) 17.9 Weight / Age Limit 25 lbs / 6 months Pre-installed Sounds 4 Bluetooth Connectivity yes Vibration no Number swing speeds 5
Defining characteristics of the 4Moms Mamaroo
Five soothing sounds and five swing speeds
Unsurpassed backrest adjustability – full range
Connect to your phone via Bluetooth for control from anywhere in the house
Comes with a power adapter
First-class workmanship and high-quality fabrics (machine washable)
why i love it
Largest incline range
The larger and more fussy baby is, the more likely he is to find one of the fixed angles uncomfortable, especially if the padding is subpar.
That’s why the fully adjustable seat makes all the difference.
You are not limited by the preset angles and can experiment by going from a fully reclined position (recommended for a newborn baby) to a sitting position (as baby grows stronger).
The adjustability of the backrest is a big plus for bigger and bigger babies
The term “bigger” isn’t universal, as not all babies grow the same way. Depending on where most of the extra weight is added affects what position is comfortable for them.
A baby with a larger head may become restless when lifting because the neck muscles cannot handle the weight.
Without going into every possible scenario, this is the bottom line – the full range of adjustability reduces the likelihood that the swing will be uncomfortable for above-average number babies, whether it’s weight-related, height-related, or something else (like size too weight ratio).
All-round premium feeling – from the frame to the toy hanger
You might be grinning now because I said I won’t be talking about “quality materials”.
It still does, but we’re not talking about meeting basic quality standards here – we’re talking high-end, premium construction that feels like it won’t give in under heavy babies.
This mamaroo wears that premium aura top to bottom – from the overall imposing design that screams “I’m expensive” to the nuanced things like the toy hanger’s reversible toy balls (I’ll talk about why that matters to the buyer to lead).
Read on: See the full Mamaroo swing review here | Check out the Mamaroo vs Graco Swing comparison here
Fisher-Price Sweet Snugapuppy – Most portable swing for larger (older and heavier) babies
Specifications of the Fisher-Price Sweet Snugapuppy
Specification / Full Name Fisher-Price Sweet Snugapuppy Height (in inches) 35.04 x 44.02 x 37.01 Weight (in lbs) 4.41 Weight Limit (in lbs) 25 Preloaded Sounds 16 Bluetooth Connectivity no Vibration no Number of swing speeds 6
Key Features of the Fisher Price Swing:
Two rocking motions (sideways and front-to-back rocking motions)
Six Pan Motion Speeds (Battery or Mains Powered)
Raised seat pad with additional headrest and machine washable seat cover
Versatile sound unit – 16 melodies and nature sounds
Foldable legs for easier storage and transport
Adjustable lying positions
Why is it a good swing for heavier babies?
This Fisher-Price is (by far) the lightest swing here. Surprisingly, it’s also the one with the largest footprint (just under 9 square feet).
Simply put – it’s strong enough to welcome a big baby and light enough to be portable (more on that in a moment).
The lightest of the bunch
If you have a big baby and need a swing to move them around, this Fisher-Price could be the end of your search.
Let’s say your baby weighs 15 pounds and do some math:
To move them around in the Graco DuetSoothe you’ll need to lug around about 36 pounds
The overall weight of the Mamaroo is slightly lower at 34 pounds
This Fisher-Price will weigh less than 20 pounds. Yes…with your baby in it.
Despite the huge difference in swing weight, there’s no significant difference in the maximum weight limit — it’s listed as 25lbs (same as Mamaroo and 5lbs lower than DuetSoothe).
This may sound contradictory if you have the label “portable” in mind.
Carry with me…
At 8.99 square feet (roughly 35×37 inches), Sweet Snugapuppy has the largest footprint in our top 5.
A large base means stability, which is a big plus for heavy and large babies.
The best part is that it doesn’t compromise on portability as the legs fold together seamlessly.
You may be interested: Can a baby sleep in a swing? how long can a newborn be in a swing | when to stop using the baby swing | can baby swings cause brain damage |
Follow this link to learn more about the difference between swings and seesaws.
Honorable Mention – Graco Sense2Soothe & Glide LX
For the sake of simplicity, I chose the top 3.
The two baby swings below were close to the top 3 but didn’t quite make it in this update. Still, they deserve a mention because they’re not far behind and have some unique perks.
Graco Sense2Soothe – Soothe a big baby with cry detection
Specifications of the Graco Sense2Soothe
Specification / Full Name Graco Sense2Soothe Size (in inches) 18.9 x 28.35 x 32.28 Weight (in lbs) 25 Weight Limit (in lbs) 5.5 – 25 Preloaded Sounds 15 Bluetooth Connectivity yes Vibration 2 Number of Pan Speeds 3
Main Features:
Wine detection sensors automatically start soothing
Vibrates at two intensity levels, which helps calm a fussy baby
Can be controlled manually or by remote control
Eight movement modes in three speed levels
Adjustable in three inclination angles
Versatile sound center – nature sounds, white noise and melodies
Which makes it a good swing for big babies
Graco Sense2Soothe is a rounded swing that ticks all the boxes of a good swing for bigger, heavier babies, and excels in one aspect.
It’s the only swing here that can actually see what’s happening in the seat. When it detects crying, it adjusts the motion, speed, and vibration settings until baby calms down.
What it means for parents of a big and heavy baby
It means more downtime for your arms.
You don’t have to take your baby out of the swing to calm him down – the swing does it all by itself.
The heavier the baby, the bigger the difference.
It’s not cheap
Scream detection is a unique feature you usually see in high-end bassines, but Graco went back to the drawing board with this one and redefined what a swing can be.
To be honest, this is a simplified version of the cry and excitement detection technology you’d find in expensive bassines, but it works well. And that’s all that counts.
It’s not cheap, but cutting-edge technology never is.
Graco Glide LX – high weight limit with an asterisk
Swing Specifications
Specification / Full Name Graco Glide LX Size (in inches) 28 x 24.5 x 36 Weight (in lbs) 17.9 Weight Limit (in lbs) 5.5 – 30 Preloaded Sounds 15 Bluetooth Connectivity no Vibration yes Number of Pan Speeds 6
Key Features of the Graco Glide LX:
Spacious seat with extra body support
Six-speed gliding motion
15 built-in sounds – 10 classic melodies and 5 nature sounds
Battery operated (4D batteries for gliding and one for vibrating)
The frame folds for storage and travel
Features a padded 5-point harness
What makes it good for a big baby
The Glide LX deserves a spot on the list of the best baby swings for big babies for two reasons:
Weight capacity is up there with the highest – listed at 30lbs
It is very easy on the budget and very popular
One caveat applies though – it’s not good for large babies as they’re likely to outgrow the shoulder straps before they reach 25 pounds.
The shoulder strap issue also kept it from making my top 3.
Choosing the best swing for a big baby – the primary and secondary factors
(with a particular focus on swings for bigger, heavier, and taller babies)
High weight limit
Most baby swings have an upper weight limit of 20 or 25 pounds. Manufacturers usually tell you to stop using it before they hit that limit when they start climbing out of the swing.
The baby swings listed at 20 pounds are not a good choice for larger babies. The range that interests us today starts at 25 lbs capacity.
It is a mistake to only select a swing based on the listed capacity. Some swings that should be great for big and big babies are actually only good for the big and heavy – not so much the big.
That’s the kind of detail I’ve tried to cover in this guide.
safety of a swing
In the context of this guide, there are two groups of security policies – specific and non-specific.
The non-specific ones are those that are universally applicable, regardless of the baby’s weight and size.
The specific ones are the ones that apply to bigger babies but are less important for an average baby.
Unspecific Security Policies
Do not leave your baby unattended in the swing
A baby shouldn’t sleep in the swing – if you notice him getting drowsy, put him on a firm, flat surface like a bassinet
Never leave the harness and straps unbuckled
Specific safety guidelines for larger babies
Each swing’s weight and size limit usually lists a specific weight, but also mentions that you should stop using a swing when baby is tall and strong enough to lean on and try to crawl out.
Bigger and taller babies are usually stronger too, which means they can hit that second milestone before they hit the weight limit.
Keep this in mind when dealing with a “diaper muscle.”
Spacious seat pad (especially for big babies)
A generously sized seat paired with a good harness is a must.
What good is a high maximum weight if it’s only on paper?
The problem with this is that maximum height isn’t a common indication in a baby swing’s listing, and you’ll have to dig deeper to see if it’s an issue.
For my top 3 picks, I chose swings that don’t have such a problem. If you search outside of this list, “dig deeper” means you search owner reviews for the word “great.” If there is a problem, it will be displayed.
Stable frame to handle the extra weight
Sturdy doesn’t mean bigger or heavier – in fact, the one baby swing that makes the top 3 for its sturdy frame is also the lightest (Fisher-Price Sweet Snugapuppy).
Stability comes from the large footprint, not the weight of the frame. It’s only natural because there’s little chance your baby will break the frame, but there’s a chance they’ll tip it over as they get stronger.
Secondary factors – not directly related to weight and size
I use the term “secondary factors” in the context of choosing the best baby swing for large babies. So I won’t go into the essentials here.
In a more general sense, there is nothing secondary about it.
baby swing speeds
All better swings allow you to choose the pace of the move.
Usually you can choose from 5 or 6 swing speeds. Most babies have a favorite or two – it’s usually the faster movements that work better during a tricky period and the slow basic movement for rest time.
baby swing movements
Movement modes can range from simple front-to-back or up-and-down rocking (like the DuetSoothe swing) to complex movements that mimic a car ride or tree swing (4 Moms Mamaroo).
If you have a fussy rattle on your hands, you have a better chance of soothing baby if you choose a swing with multiple motion modes.
Nature sounds, music and white noise
Most swings can play music from your phone. For this reason, the pre-installed sounds play a minor role compared to the quality of the speakers.
If the speakers can produce a clear sound, you can choose the relaxing melody or sound your baby likes on your phone.
This may raise some eyebrows, but if you analyze the market you’ll see that even some of the more expensive swings (like the 4Moms Mamaroo) only offer a few preloaded sounds and focus on connectivity features like an MP3 plugin or Bluetooth connection .
My point is this – choose a swing that lets you play anything from your phone. The built-in sounds will be an afterthought.
FAQs about baby swings for big babies
How big can a baby be for a swing?
The baby size limit for a swing is defined as the maximum weight allowed and is usually in the 20 to 30 pound range.
At what age do you stop putting a baby in the swing?
Most babies will outgrow a swing by the time they are 9-10 months old.
Which baby swing is too big?
Baby is too big for a swing if they weigh more than the listed capacity or become strong enough to crawl out.
Conclusion and summary
I’ve set my sights high with this guide and I’m pretty happy with the result.
I feel that the multi-faceted approach to what is the best swing for a big baby worked well. We’ve touched on all the issues – weight, size, and proportions – and found swings that live up to the challenges.
We’ve got every scenario and unique challenge covered – from the highest weight capacity of the Graco DuetSoothe, to the fully adjustable incline of the Mamaroo, to the largest footprint of the Fisher-Price Sweet Snugapuppy.
I will stay tuned and update this guide as the market changes.
How do I stop my porch swing from hitting the house?
A porch swing needs 26 to 36 inches of clearance on the front and back to prevent the swing from hitting the walls of a home. There should also be 14 inches of clearance on either side of the swing to ensure that the swing does not rub against the walls or guard rails on the porch.
How do I know if my porch can safely hold a swing?
A porch swing needs 26 to 36 inches of clearance in the front and back to prevent the swing from hitting the walls of a house. Also, there should be 14 inches of clearance on either side of the swing to ensure the swing does not rub against the porch walls or guard rails.
So when you put up a porch swing, there are a few things you need to keep in mind so that the new addition doesn’t pose a threat to yourself or the building next to it. You can keep everything in top condition if you allow enough clearance for your swing!
Where to put a porch swing
Before you even buy a porch swing, you need to measure where you want your swing to be. Measure the length, width, and height of your porch, then decide what size swing is best for your porch.
A good tip is to have about 3 feet (36 inches) behind and in front of the swing and 14 inches on each side of the swing. This will ensure your swing doesn’t wear down or damage your walls or guard rails. In order for people’s feet to comfortably touch the ground, the swing should sit between 17 and 20 inches off the ground.
If you have a lighter or smaller swing, you may want to add even more room (about 4 feet) for clearance, as the lighter weight will allow the swing to swing higher than expected.
Once you’ve decided on the size of your porch swing, make sure you don’t buy the swing until you’ve determined where the joists are in your ceiling. The best (and only) place to hang a porch swing is from the joists of the porch or deck ceiling.
If you don’t have joists that allow your swing seat to stay away from the walls of your home, you will not be able to hang the swing seat from the ceiling of your home. Instead, you can opt to buy a framed porch swing, which is a great option as you can move it around as you wish rather than having it hanging from the porch.
If you have joists that allow you to hang a swing at least 26 to 48 inches from your porch walls or guard rails, you can successfully hang a new swing set on your porch. First, use a stud finder to find the studs of your post. Once you find these bars, mark them so you can remember where they are.
Once the joists have been identified, it is important to know if the joists can withstand the weight of the swing and multiple people.
The joists must be able to withstand at least 500 pounds, if not more. The joists should be at least 2×6 inches to ensure they can take a large load. If you want to make sure your swing can hold a lot of people, you can always have a professional come and see if your beams are big/strong enough.
To learn more about this and more, visit our main page about porch swings.
What Size Porch Swing Should You Buy?
According to The Porch Swing Company, 4-foot swings are the most popular choice. However, you should choose a swing that can hold the number of people you want, depending on the size of your porch. You can either opt for a swing for one person or for a porch swing that is suitable for several people. A good rule of thumb for size is about 2 feet per person, so a porch swing that is 4 feet long will typically sleep 2 people.
When choosing a swing seat, it is also important to consider the clearance required for the walls and railings of your home and porch. As long as you have enough room for 3 feet in front and behind and 14 inches on each side of the swing, your porch swing shouldn’t bump into your home’s walls or guard rails.
How to remove porch swings
If you have placed a porch swing that is bumping into your house, you will need to move the porch swing to a different location on your porch. To remove a porch swing, you must first lift the chains and swings off the S-bolts. If there is a beam with some clearance above the beam, the porch swing is most likely attached to an eyebolt (we also wrote about the best porch swing hardware in another article). If the swing was attached directly to the porch ceiling, there are two lag-and-eye bolts.
Here are the instructions for removing each of these types of screws.
Removing an eyebolt
An eyebolt is inserted into a hole that has been pre-drilled the full width of an entire beam. To remove these types of bolts, you need to find the nut that is on top of the beam. The nut reinforces the eyebolt, so it must be removed first. Get an adjustable wrench and then adjust it to the size of the nut.
Then slowly turn the wrench counter-clockwise (remember right tight, left loose). Make sure the nut is completely loosened from the eyebolt. Once the nut is loose, turn the eyebolt counter-clockwise (either with a tool or a drill).
Removing Lag and Eye Bolts
If you drilled your swing seat directly into the ceiling, simply use an adjustable wrench and adjust it to the eye of the screw. Then turn the screw counterclockwise until it comes out of the beam.
Make sure you never use the same holes for your studs again when hanging a swing seat. You will need to find a new location for the screws as the pre-drilled holes are now compromised and cannot securely hold the weight of a swing seat.
How do I stop a porch swing from hitting my house?
- Move the swing farther from the home.
- Pad your home.
- Secure the swing with strapping.
- Set the swing on a solid object.
- Wedge the swing still.
- Remove swing during storm season.
How do I know if my porch can safely hold a swing?
So you find yourself with a porch swing that keeps banging against the house. This happens either while you’re swinging in the swing or perhaps due to intermittent gusts of wind. Whatever the cause, you want to keep the swing from hitting the house. In this article, we collect and present several proven techniques to prevent the porch swing from hitting the house.
To keep your porch swing from hitting your house, consider the following options. Which option you choose will depend on how often you use the swing, what materials are available, and the reason your swing is coming into the home.
Move the swing further away from the house
Fill in your home
Secure the swing with straps
Place the swing on a solid object
Wedge the swing still
Remove swing during storm season
Keep reading the rest of this post to learn how to perform each of the above techniques. By reading this guide, you’ll learn everything you need to know to stop that pesky porch swing barrage. Finally, we will answer some questions related to the topic of this post.
How to prevent the porch swing from hitting the house
As you can see, the techniques to prevent a porch swing from hitting the house can be broken down into the category of moving the swing and securing the swing. If the swing hits the house while a person is using it, physically moving the swing farther from the house or padding your house is generally your best option.
On the other hand, if you have a porch swing that routinely bangs into your home during storms or even light breezes, securing the swing is a lot easier. If you live in an area that experiences high winds on a regular basis, securing your swing is a good choice to improve swing longevity and integrity.
Move the swing further away from the house
Porch swings come in two main styles: permanent and self-contained. In the following two subsections, we’ll discuss how to move these two different swing styles.
Self-contained porch swings
Typically, these types of porch swings include a complete structure that supports the swing. This often includes an awning. In most cases, you only need one or two people to push this swing further away from your home.
However, sometimes these self-contained porch swings can be attached to your porch with screws and/or bolts. If this is the case, you will need to remove these fasteners first before moving the swing further from the home. Use the appropriate size drill bit or socket for this job.
When removing, be careful not to damage the decking material. Also note how the fasteners are attached so you can mimic that attachment in the new location.
Permanent porch swings
Moving permanent porch swings is much more difficult than moving the self-contained varieties. Typically, these types of swings have a permanent fixture attached to a ceiling or soffit. In most cases, these are high-strength eyebolts that are fastened through both the fairing and the frame material.
First you should loosen the swing from the eyebolts. Often this is a two person job to avoid injury and ensure proper ladder safety. The goal is to gently lower the swing onto the porch without dealing any damage.
Now that the swing is free, slide it out of the way and unscrew the eyebolts. It is often helpful to use an adjustable crescent wrench to loosen these screws. For this technique, open the wrench enough to wedge it into the eyelet, and then unscrew the eyelet screw.
Next you need to identify a new solid attachment point. First, determine how far the swing needs to be from the wall. Generally, three feet to four feet between the swing set and the house is enough to avoid hitting.
Also make sure that there is about 30 cm of space on the sides of the swing. If you have a very high ceiling, high winds, or boisterous swingers, you may need to give yourself even more space.
Importantly, you now need to identify new solid attachment points. If you have an exposed ceiling frame, you simply need to measure to the center of the frame in the new location.
However, if you have ceiling trim covering the frame, you might want to consider using a bolt finder to make sure you hit the center of the frame with your eyebolt.
Now pre-drill the eyebolt hole with a drill and a drill bit the size of the unthreaded eyebolt shank. The goal is to leave wood for the threads to bite into, but remove all of the wood you would have to force out of the way with the bolt shank.
Finally, you can screw the eyebolts back into your pre-drilled holes and hang your porch swing further away from the house. If you found that the old eyebolts or other fasteners were very rusty, you may want to purchase replacements during this project.
Upholster your home
Another option is to upholster your home with some type of foam or fabric. This is often best when the swing hits a single point like a corner or trim piece.
Click here for a living area pad from Amazon.
The main disadvantage of this method is that you have to drill some kind of hole in the wall covering of your house or add glue that is difficult to remove.
Secure the swing with straps
If the wind is your problem, securing your swing with cam straps or ratchet straps may be just the thing. Cam straps use teeth to hold the strapping in place and are very easy to tighten and loosen.
Click here for Amazon Cam Straps.
Ratchet straps use a ratchet component to pull the strap taut. This makes ratchet straps much tighter but also more difficult to tighten and loosen.
Click here for Amazon ratchet straps.
Also, this method only works if you have a nearby porch railing or other attachment point to attach the strapping to. Consider installing eyebolts on your porch near the wall if there is no other attachment point. Be careful, if you place these attachment points in the wrong place they can prove to be hard-to-spot trip hazards.
Think about how long you want the strapping to be. If you buy straps that are too short, the straps will be completely useless. However, if the straps are too long there is a lot of extra tail that is cumbersome to handle and can flap around in the wind.
Place the swing on a solid object
For this strategy, simply place the swing on a cooler, chest, table, or similar object. This makes the swing as stable as any other piece of furniture on the patio and stops rocking. This can be an easy alternative to strapping, especially if you already have a sturdy item of the appropriate height handy at home.
Wedge The Swing Still
Another strategy for swings that move in the wind is to clamp the swing with a long rigid object. Options include custom lumber or long steel bars. You can thread these through the swing and then into your porch railing or even between decking.
This strategy depends on both your swing/porch setup and the availability of a strong enough material. Unfortunately, this only works in lighter wind situations.
Remove the swing during storm season
If you experience a certain time of year that is very blustery, simply disassembling the swing and storing it in a garage or right on the porch can be a good choice.
This works if you don’t want to use the swing at this time of year either. Again, it’s wise to do this heavy lifting with a helper to avoid damage or injury.
How far from the house should a porch swing be?
As mentioned above, it is common to install a porch swing so that it has three to four feet of clearance behind the back of the swing and the wall.
You also need about 30 cm of free space on each side of the swing. Also, you should install the swing so that it is about 1.5 feet from the porch.
How to strengthen a blanket for a swing?
Crucially, a hanging hammock swing must be attached to a solid ceiling frame. Sometimes this can mean reinforcing 2×4 rafters or old flimsy looking structures. In other cases, you may want to add a frame to mount a swing in a specific location where there is currently no rafter.
For Amazon Quality Construction Screws, click here.
Accomplish both of these tasks by screwing new framing timber into the existing structure. Be sure to use proper construction screws and pieces of wood that fully bridge weak or underframed areas. If you’re ever in doubt, it’s possible to add more structure to increase swing support.
How much weight can a swing seat stand?
Every porch swing has its own weight limits. Also, the fasteners you use to attach the swing to your frame generally have weight limitations. Check the manufacturer’s documentation for these two numbers.
However, it is generally true that porch swings can support around 550 pounds.
Finally
In this post, we covered how to prevent a porch swing from hitting the house. We’ve discussed ways to accomplish this that both leave the swing usable and some that keep the swing still. You should choose a method that best suits your needs. Finally, we answered a few other related questions. Much luck!
Before you head out, be sure to check out these guides:
What does the color of a porch light mean?
15 porch post style ideas to check out
How big should a porch rug be?
How do you secure a canopy swing?
If the ground underneath your swingset is hard enough, you can use wooden stakes as anchors to hold it in place. Wooden swing set anchors can work well if you want to keep the entire set wooden and not use any metal or plastic. If the stakes are driven far enough into the ground, they can be an effective anchor.
How do I know if my porch can safely hold a swing?
Split
A swing set is a great way to add some extra fun to your garden without completely breaking the bank. They can range from a simple single swing to an entire playset complete with slides and monkey bars. However, the most important thing with all of them is to make sure they are safe.
To make a swing as safe as possible, you need to anchor it to the ground. This ensures that the children cannot tip it over and possibly cause serious injury. In this article, we have compiled 11 of the best ideas for anchoring a swing set to help you find the method that is not only effective but also suits the aesthetics of your garden.
Metal swing anchor
Ashman Black Ground Anchor Use these metal ground anchors to anchor a swing set to harder ground. Get the prize
Metal swing anchors are long, galvanized steel rods with a flange that hook into the ground beneath the set. They can be attached to the swing with iron clips or bolts and work well on harder ground that doesn’t give much. The flange is angled like the threads of a screw and digs into the ground for installation, but won’t come up again without rotating.
Metal swing anchors dig deep into the ground and don’t show much above the surface. This makes them a good option if you want the anchors to have a low profile to match the backyard look.
Corkscrew Anchor
Eurmax Anchor Kit This set of trampoline corkscrew anchors works just as well for swings. It comes complete with ratchet straps to allow you to attach the ground anchor to your swing’s bars. Get the prize
As the name suggests, corkscrew anchors are shaped like a wine opener and are meant to dig into softer soil and soil. Each bend in the screw is spaced far apart to get the most soil between them. This way you can get them down low and use each level of the turns to secure the anchors in place.
Corkscrew anchors are usually designed to be almost flush with the ground. You can attach them to the swing with bolts or chains to prevent tripping.
Wooden swing anchor
Kitzman’s Dixon Survey Stakes If you have a wooden swing set, you can attach its stakes to wooden stakes driven deep into the ground. Get the prize
If the ground underneath your swing is hard enough, you can use wooden stakes as anchors to hold it in place. Wooden swing anchors can work well if you want to hold the entire set out of wood and not use metal or plastic. If driven far enough into the ground, the stakes can be an effective anchor.
Wooden stakes work well too, as they can be nailed or screwed directly to the swing frame posts. You don’t have to worry about using straps or chains and you can rest assured that the set will be securely fastened to the anchors themselves.
Heavy Duty Swing Set Anchors
Pinnacle Mercantile Rebar These rebar are best used on hard clay or rocky ground. Hook this to a chain or metal loop attached to your swing before hammering it into the ground. Get the prize
If you have a particularly large swing set or live in an area that gets a lot of wind and inclement weather, you’ll want some sturdy swing anchors. These can be made from galvanized or galvanized rebar and are bent at the end to give you two different anchor points.
Heavy duty swing anchors are designed to secure into all types of soil and soil. The longitudinal ridges act as handles that grip the ground well and won’t let go, even when heavily used.
Swing set anchor kit
XDP Recreation Ground Anchor Kit This kit includes everything you need to anchor your swing to the ground. Get the prize
A swing anchor set is a great option if you want everything to come in one convenient package. An anchor kit includes everything you need to secure your swing to the ground without the hassle of finding all the right parts and materials.
They contain everything from the stakes to the bolts that secure the swing. This could be a good choice if you want to be sure that everything is stable at every connection point.
Swing set inserts
Metal Garden Stakes For small swings that need anchoring to clay or dry loam, these metal stakes are an affordable option. Get the prize
Swing stakes are one of the simplest solutions for securing a swing and work best in very hard ground. Their flat design is meant to be driven into the ground and easily cut through and then rotated to prevent them from coming up again.
These are a good choice if your garden has a hard surface such as clay or dry loam. The flat edge ensures a secure hold without breaking your back when you tuck it in.
Swing set tie downs
Swing Tie Down Straps Use metal pipe clamps to tie down the cross member of your swing set while it is flat on the ground. Get the prize
If your swing has a flat crossbar running along the bottom, you can use metal flange tie downs to hold it in place. These tie downs can be held in place with corkscrew rods or another preferred method.
Tie down straps allow you to easily make small adjustments to swing set placement without having to fully pull out the entire anchor system. They are a good choice if you frequently need to mow the grass around the base of the set and want to be able to trim underneath.
DIY Swing Set Anchor
Swing anchors can be made from almost anything that can be securely fastened into the ground and attached to the swing frame posts. Large hex head screws, tent stakes, and wooden stakes are good options for holding a swing in place.
If you want to make your own DIY swing anchors, be sure to use materials that won’t crack or deteriorate from moisture. The weather and rain will eventually find their way underground and this could compromise the integrity of the anchors.
cement anchor
One of the most secure ways to anchor a swing set is to cast it in concrete. If your swing set has single frame posts, you can dig diagonal holes for them to go in and fill those holes with cement.
Use a spirit level over the top post of the swing to make sure it stays level as you dig the holes. You should also be sure that the swing is where you want it to be as it will be very difficult to move once the cement has set.
ground cover anchor
If you have a very small swing you can also use the ground cover to anchor it in place. Simply bury the frame posts at least 6 inches underground and fill in the holes with packed dirt.
This is a particularly effective method when you want to move the swing slightly. To do this, simply dig out the frame posts and refill the holes before digging new ones in the new location.
flower pot anchor
If you want to take this opportunity to create something really unique and interesting, put some cement in the bottom of four flower pots and use them as your weighted anchors. Then you can actually pour soil over it and plant flowers in it for a nicely integrated design element.
One final thought on how to anchor a swing set in your yard
The most important thing to consider when deciding how to anchor a swing set in your yard is safety. As long as the set is stable and cannot tip over, the only limit is your imagination.
Do you have a unique way you’ve anchored your kids’ swing set? Let us know in the comments section below!
How To Install Ceiling Hooks For A Porch Swing Or Plants
See some more details on the topic how to secure porch swing from wind here:
How To Keep A Patio Swing From Blowing Over – Big Yard Fun
Tie it down · Weigh it down with sandbags · Bolt it down with brackets · Anchor with pins in grass · Block the wind · Sit something on it · Lay it …
Source: bigyardfun.com
Date Published: 2/9/2021
View: 6892
9 Ways How to Secure Outdoor Furniture from Wind
If you have outdoor patio cushions, it is always wise to bring them inse if you are …
Source: thebackyardpros.com
Date Published: 12/5/2021
View: 3651
How do I stop my porch swing from hitting my house?
Invest in Heavy Furniture. · Plant a Windbreak. · Get a Weighted Umbrella Base. · Stack Your …
Source: answer-to-all.com
Date Published: 5/12/2022
View: 3670
Porch swing takes out deck railing! – Houzz
We hung a porch swing on our porch and used a bungee cord to secure it to the deck railing to prevent it from banging around in the wind.
Source: www.houzz.com
Date Published: 10/1/2021
View: 761
8 Ways to Secure a Porch Swing from the Wind
Balcony Boss is reader driven. If you make a purchase through our links, we may earn a small commission at no cost to you. See our policies for more information.
A porch swing is a great summertime addition to an outdoor space, but it can become dangerous when the inclement weather rolls by. A strong enough gust of wind will blow it over or into things, possibly causing damage.
So let’s look at how to protect a porch swing from the wind. Our tips work for built-in porch swings and freestanding patio swings and egg chairs.
1. Consider placement
Works for: patio swing or porch swing
First, make sure your patio swing is set up away from your home, or at least far enough away to swing freely without bumping into anything. Of course, this may not be possible (especially with a porch swing), but by keeping some distance between it and your house, you can avoid the worst of the damage.
2. Staking
Works for: patio swing
A good option for preventing a patio swing from tipping over is to stake it out. Any type of heavy-duty outdoor stake will work, but this only works on soft surfaces like grass.
3. Screw it tight
Works for: porch swing or patio swing
Alternatively, if your porch swing is set up on a deck (or porch), bolt it down. Anything from a corner brace to a swing hanger will get the job done. Canopy sandbags can work for a patio swing if it’s on a freestanding frame and you don’t want to attach it permanently.
4. Bungee cords
Works for: porch swing or patio swing
If your primary concern when securing a swing seat from the wind is the seat itself, bungee cords are a good option. For a patio swing, wrap them through the seat and around the frame and they should keep it from moving in the wind. To secure a built-in porch swing, you must try to attach the seat to something like a railing.
5. Use a windbreak
Works for: patio swing or porch swing
In lighter winds, a simple windbreak should be enough to keep the seat from slipping. Of course, this doesn’t prevent a patio swing from tipping over, but it does make it a little more comfortable to sit on. For porch swings, arrange the windbreak around your porch or install some type of privacy screen.
You can also make a windbreak out of any piece of fabric. The intent isn’t always to stop the wind completely, but to reduce it to the point where it’s no longer a nuisance.
6. Remove the pillows
Works for: patio swing or porch swing
While this isn’t a tip on how to protect a porch swing from the wind, it’s common sense when you know bad weather is coming. Remove the pillows entirely or follow our tips on how to keep them from blowing away.
7. Put things on it
Works for: patio swing or porch swing
It might sound like an obvious suggestion, but put things on the swing so it doesn’t get blown around. However, they must be quite heavy. Consider using other patio furniture, although you risk doing more damage in high winds.
8. Lay it down
Works for: patio swing
Perhaps the easiest way to prevent a patio swing from tipping over is to set it up yourself. Finally, if you’re worried about damaging it, you might as well be proactive!
Final Thoughts
Knowing how to protect a patio swing from the wind is a bit more complicated than with other outdoor furniture. They’re an easier target because they’re big, but at least one of the above options should do the trick. However, if all else fails, you can simply take the swing apart and store it indoors until you want to use it again.
Porch swing takes out deck railing!
We hung a porch swing on our porch and tied it to the deck railing with bungee cord to keep it from flapping about in the wind. When we had 80 mph winds, the porch posts (which weren’t anchored to anything) and railing snapped, scattering them 25 feet away. About $2,000 later we put it back together. I really love a porch swing BUT this can’t happen again. I would like to plant some trees to block the wind there, but we are in an area and the septic tank and drain field are in that area. ideas anyone?
How do I know if my porch can safely hold a swing?
Alternative porch swings for one person
Not every porch is capable of holding a porch swing. With existing porches, there are two areas I am considering for swing installation. The most important [area] are the bars. To support at least 500 lbs, one 2×8 beam or two 2×6 beams must be supported at both ends. If this is not possible, I recommend installing new special joists or two 4×4 joists to span existing joists.
The next [area] is the range of motion. A minimum of 4 feet with the center of the swing centered is important for clearance. Depending on the width of the porch, this may not be possible, and I suggest homeowners look at alternative one-person porch swings.
Related searches to how to secure porch swing from wind
Information related to the topic how to secure porch swing from wind
Here are the search results of the thread how to secure porch swing from wind from Bing. You can read more if you want.
You have just come across an article on the topic how to secure porch swing from wind. If you found this article useful, please share it. Thank you very much.
