How To Sew On Cub Badges? Top Answer Update

What to do with your badges when you move to a new area? You can take some of your badges with you, others have to move to your badge blanket

When it comes time to move to a new department, you might want to keep your old uniform as a keepsake, with all your badges intact, just as they were when you left the previous department. Once you’ve invested in your new section, you can purchase a section starter set for a small fee and sew the new badges onto your new uniform. If you want to keep your uniform exactly as it was, you can also purchase replacement badges for staged activities.

If you wish, you can detach and move your badges. The guide below shows what you can do with the badges you’ve earned, and explains which ones you can keep on your uniform when you move to a new area and which ones you can’t. As always, if you have questions about badge placement or which ones to keep, reach out to your section leaders who can help.

You can iron on rather than sew on Boy Scout patches and as long as the back seals properly you don’t have to worry about them falling off when the uniform goes through the wash. Some Scout Masters require Scouts to sew on their patches, but even if the patches end up requiring stitching around the edges, ironing them on before sewing will hold them in place. To ensure you place the patch in the correct location, check the Boy Scout manual for correct patch placement prior to ironing.

Patches are a great way to add personality and color to a garment. It could be that you have an old jacket that you want to personalize, or you have kids that want custom made garments or backpacks with patches from their fandoms. But what if you don’t want to sew these patches onto your clothes?

While sewing patches onto clothing is the best option when you want a more durable garment, it does have its downsides. Anyone short of a needle and thread can panic modifying such clothing. It could go wrong and get messy pretty easily. It’s totally understandable if you want an alternative solution to applying patches without sewing. So what are your options?

How to attach patches without sewing.

The good news for anyone who doesn’t like the idea of ​​sewing patches onto clothing is that there are some great alternatives. You can get some products that fuse or stick the patches onto the product without too much difficulty. You can see some of them below. I’ve provided a brief introduction to the different shapes so you can decide which one is best for your needs. Just be aware that while many people find no-sew methods to be the easiest and less time-consuming option, there are still risks and you need to be careful.

How can you attach patches without sewing?

There are three common options for those who want to apply patches without sewing them. They are:

Fabric safety belt

textile glue

velcro tape

Each option has pros and cons, so it helps to get a better idea of ​​the process and likely outcomes first. From there, you can search online for the best patch adhesive materials and find one that best suits your needs and budget.

Iron-on patches with fabric securing.

This is a popular option when dealing with patches. Fabric Fuse Material is a beautiful thin mesh that adheres to the material of the patch and garment to create a strong hold. You can also use this material to hem clothes because the process is so easy. You simply glue the webbing to the materials and press them together.

I like this option in the right situations. You may find that you get a nice flat surface that you hardly notice the patch is attached to. However, you must be careful how you use the material, as you will see later. Here you can also learn how to make iron-on patches.

Use fabric glue.

Alternatively, you can glue the patch to your material for a strong bond. There are some great glues that are specifically designed for use with fabric. You may also find that there are some that work better with denim or other fabrics. Just make sure to find the best fit so you don’t damage your clothes in the process.

With Velcro.

The term Velcro may be more familiar to you than the term Velcro. It turns out that Velcro is one of those examples of a brand name that has become synonymous with the type of product. In any case, this is a possible solution to attach patches without sewing them. You need to be sure here that you have a self-adhesive Velcro strip, otherwise you’ll need to get fabric glue as well.

Personally, I’m not enthusiastic about this approach, except in certain situations where it’s the most practical solution. The negative side of using velcro for your patches is that you have a very thick layer between the patch and the jacket. This will not look as good as a glued on patch that sits flush with the surface of the garment.

However, there is an option to make the patches interchangeable. You can permanently attach a surface to a backpack with hooks and then switch between a series of patches with the loop material on the back. These patches need to be the same size and shape, but this might work well for kids who want to change up their looks.

How to apply no-sew patches with these 5 products

1) iCraft PeelnStick Fabric Backup Sheets

This first option is great for those interested in the idea of ​​fabric fuse sheets, as you have two large sheets, 8.5 x 12 inches, where you cut them, peel off the backing indicator, and then press the material to attach it together.

2) Thermoweb Peel n Stick adhesive sheets

That’s pretty much the same thing with a similar amount of webbing. You will receive 4 sheets measuring 8.75 x 5.5 inches. While the focus of the description is on crafting and scrapbooking, some users have seen great results with patches when using an iron.

3) iCraft Fabric Fuse Liquid Glue

Since the iCraft webbing is so popular, I wanted to include this liquid glue as an alternative. This product is easy to apply and creates a strong bond with a clear finish. It’s also non-toxic. You only get 2.1 fl.oz, but this is an affordable option for casual projects.

4) Aleene’s Fabric Fusion Adhesive

Get more bang for your buck with this alternative 8-ounce glue. Therefore, it may be preferable if you make a lot of apparel with patches or need glue for other applications. You can achieve a great result if you are happy to let the garments dry for a while. This may be preferable to quick-drying options that cannot be changed once applied.

5) Qidisgoy hook loop strips with adhesive

These strips are great because you only need to trim the length and width for a neat look. You get a lot for very little, it’s a lot of 12 cut into 7 inch strips. They are also self-adhesive for added ease of use.

Important tips to get the best possible result from your patch.

1) Take your time applying for a clean and precise finish.

Whichever option you choose to attach the patch, whether it’s webbing, adhesive, or an off-brand version of Velcro, you need to be careful. Try your best to cut the webbing in line with the edge of the patch. This means there are no unsightly overlaps to deal with. Also, try to cover every inch of your back. Use a craft knife for a cleaner look than scissors. As for the glue, you have to be careful not to use too much so that it starts seeping out the sides when you press it onto your clothes. At the same time, you should not use too little so that the edges peel off.

2) Be very careful with your placement because there is no turning back.

This is the most nerve-racking part of the process when you have a very specific goal in mind with the final look of the garment. Some designs and placements are more difficult than others, especially when you have text that needs to be straight. Some bags and jackets can benefit from a more haphazard approach and whimsical design. Once the patch is in place, there is no turning back. It’s not like a sewn-on patch where you can undo the selection and re-adjust it. The adhesive is permanent until it wears off.

3) Keep in mind that some of these solutions are more durable than others.

The strong adhesion of the textile adhesive is ideal for strong attachment to children’s clothing. These patches should be worn a lot without having a noticeable effect. However, this will not be the same for Velcro and webbing. The properties of the webbing deteriorate over time and regular washing does not help. You can see that the corners are peeling off a bit. As for velcro, if you’ve ever had velcro on shoes you know how messy and flimsy they can get over time. The fluffy side can get messy and trap dirt, hair, and other fibers.

Before I summarize some final thoughts on applying no-sew patches, I would like to recommend one more guide. If you like the idea of ​​using fabric patches to iron-on patches onto clothing, you might also be interested in learning how to make iron-on patches. Creating your own patches from scratch instead of ironing onto pre-made products can be a very rewarding experience. Check out my guide for ideas on how to create these designs using different methods for some great custom made garments and bags.

What is the best way to attach patches without sewing?

As you can see I’m not a big fan of the velcro and would only recommend it for those interchangeable patches on pockets. But maybe you feel that this solution is perfect for your projects. Tissue securing tape is a good option in the right situations because it’s so easy to use and you get a good result – even if it doesn’t last forever. Finally, there is the fabric glue. I say if you have a patch you love and want it as a more permanent addition to your garment, this is the best option.

Application Tips: For best results, the adhesive should be applied to both surfaces and allowed to partially dry before pressing the surfaces firmly together.

Colour: Dries clear.

Coverage: A pea-sized drop per square inch. The adhesive can be spread out for a more even coverage.

Curing Time: Allow at least 24 hours for full curing.

First Aid: If swallowed, call a poison control center or doctor immediately. Do not induce vomiting. In case of contact with eyes, flush with water for 15 minutes. In case of contact with skin, rinse well with water. If inhaled, move person to fresh air. Call 800-420-7186 for medical emergencies only.

Flexible when cured: Yes

Gap Filling: No

Inside: yes

Outdoor: yes

Storage: Wipe the nozzle with a dry cloth and put the cap on tightly. Store cool and dry. Keep away from children and animals.

Application Temperature: Best used between 50°F and 90°F (10°C and 32.2°C).

Operating Temperature: -20°C to 50°C (-4°F to 122°F)

Waterproof/Water Resistant: Waterproof.

Working time: 1-5 minutes. Not repositionable. The best strength is achieved with an open time of 1-2 minutes.

Sienna Pacific is a participant in the Amazon Services LLC Affiliate Program, an affiliate advertising program that allows websites to earn advertising fees by advertising and linking to Amazon.com.

A STICKY TOPIC: SEWING..AND HEMTAPE..VS. STICKER (STICKING BADGES ON YOUR TOP or campfire blanket)

We experience a lot of indecision when it comes to iron-on and sew-on patches. We’re here to tell you there’s not much of a difference. However, we would like to explain both to you so that you can make the right decision for your current project.

First let’s clear up the confusion and I’m pretty sure I know where it’s coming from. Patches that contain a heat seal or iron-on film seem like there’s only one way to attach them.

Iron-on patches contain a thin film (see above) of commercially available heat-seal foil. Guess guys? These can also be sewn on. You don’t have to iron these on and then sew them on. If you don’t want glue on your jacket, backpack, etc. then just sew these bad boys on and forget the iron. The heat seal backing is flexible enough for needle penetration. In my opinion the patch lasts longer because not only is the back of the embroidery knotted but the knots are also heat sealed. A dissolution is therefore practically impossible.

There is also confusion as to whether or not the heat seal pad is plastic. Our company does not use plastic backing. Usually this makes the patch very stiff and cannot be ironed on. Our heat seal makes the patch a little bit more stable… and when I say sturdy, I mean it adds a bit of rigidity to the patch.

Patches are great too. They add flexibility to the garment to which the patch is attached. So if you don’t want your patch to be a little stiff you can omit the backing of the hanger and after sewing on the patch can flow a bit with the fabric.

When deciding whether to buy iron on or sew on patches it really comes down to what you prefer or what look you are going for. However, the iron-on patch really gives you the best options… You can sew it on or iron it on. The best from both worlds.

I wanted to add one more thing as a final thought and great point from one of our great customers, Dori. “Having been using your name patches for well over 5 years the sewing method has worked the best as they have always been removed and sewn up! Love your patches!”.

What a glowing recommendation from Dori, and an excellent point for sewing patches on so they can be transferred and reused!

If you intend to wear the patch from jacket to jacket and don’t want to permanently attach it to a garment, then sewing it on works best. You can unpick it and sew it onto something else. Just remember to NOT iron it on first.

Military insignia, also commonly referred to as insignia or insignia, is an age-old tradition in service uniforms. From Roman times to the present day, they are a meaningful symbolic representation.

Not only in the United States, but these patches are also worn by military personnel around the world to communicate rank, army or division. More importantly, they demonstrate the fighting spirit, pride, and patriotism of the military.

In addition to the standard insignia on the left side of a uniform, there are special insignia awarded to soldiers, especially military leaders, to honor significant achievements.

If you want to wear a military patch, learning how to sew a patch onto a military uniform is important. There are three methods you can consider to sew military patches as follows:

Method 1: sewing with a machine

Step 1: Lay out and iron your uniform

Step 1: Lay out your uniform and iron it Step 2: Take your patch and position it on the uniform

Step 2: Take your patch and position it on the uniform. Step 3: Temporarily secure the patch with tape or a pin

Step 3: Temporarily secure the patch with tape or a pin. Step 4: Set up the sewing machine and get ready to sew

Step 4: Set up the sewing machine and get ready to sew. Step 5: Thread the machine and start sewing at low speed

Step 5: Thread the machine and start sewing at low speed. Step 6: Seal the patch and trim any loose threads

Step 6: Seal the patch and trim any loose threads. Step 7: Try on your newly patched uniform

Method 2: Hand sewing

Step 1: Lay out and iron your uniform

Step 1: Lay out your uniform and iron it Step 2: Place the patch on the uniform

Step 2: Stick the patch on the uniform. Step 3: Have the thread ready and cut it into a single piece if you like

Step 3: Get the thread ready and cut it into one piece as you like. Step 4: Pass the thread through the eye of the needle and secure with a knot

Step 4: Pass the thread through the eye of the needle and secure with a knot Step 5: Start sewing from the inside of the uniform and work outwards

Step 5: Start sewing from the inside of the uniform and work your way to the outside. Step 6: Continue sewing in a straight stitch pattern all around

Step 6: Continue sewing in a straight stitch pattern all the way around. Step 7: Secure the patch with a tight knot and trim off the excess length

Dive into the details of each step!

2 ways to sew on military patches

Method 1: sewing with a machine

What you must have

The first method of sewing patches on uniforms relies on a sewing machine and threads. The latter should be the same color as your patch or as similar as possible. Alternatively, the thread can be clear.

Also, you need to prepare an iron and a roll of iron-on tape or a couple of clothespins. Once you have all of these materials, you’re ready to start sewing!

What you have to do

Step 1: Lay out your uniform and iron to remove wrinkles and creases

First, start by laying out and ironing your uniform to smooth out wrinkles and creases. This is an important step as you will have a permanent aesthetic eyesore when you sew over the creases and creases.

Step 2: Take your patch and place it in the correct position on the uniform

Next, take your patch and position it on the uniform. Make sure it is in the exact location you want before proceeding to the next step.

Step 3: Temporarily secure the patch with ironing tape or a dress pin

Now cut a piece of the prepared iron-on tape and use it to attach the patch to your uniform. If you don’t have tape, you can use a needle.

Step 4: Set up the sewing machine for sewing

Then go to your sewing machine. Slide the garment onto the plate or deck and set the needle ready to make a straight stitch. Also support the presser foot in an “up” position. These are the general steps for most sewing machines, but if it doesn’t seem the same to you, make sure you refer to your model’s instruction manual.

Step 5: Thread the machine and start sewing at low speed

Place your thread on the spool of the spindle. Fill up the coil before inserting it in the right place on the machine. Turn on the machine and set a low speed to start. When you are used to sewing, you can use a higher speed.

Note: A slower speed is recommended for better control.

Depress the foot controller to start sewing. While the needle is running, rotate your uniform as needed.

Top tip: Release the foot pedal before spinning. However, leave the needle in the same place to ensure a consistent pattern.

Step 6: Seal the patch and trim any loose threads

At this point you should have stitched all the way around the patch. Secure it with a knot and use scissors to trim any loose threads. It’s good to leave about an inch of thread so the knot doesn’t snap and ruin the stitches.

Step 7: Try on your newly patched uniform

You’re ready to go! Now all you have to do is take your uniform out of the sewing machine, put it on and admire your sewn patch!

Method 2: Hand sewing

What you must have

The second approach is hand sewing. For this you need a sewing needle and thread. As with machine sewing, the thread should be the same color or as close as possible to the color of your patch. Otherwise, you can use a transparent thread.

What you have to do

Step 1: Lay out your uniform and iron to remove wrinkles and creases

As with the first approach, start by ironing your uniform. When you are sure that there are no more creases or wrinkles, continue to the next step.

Step 2: Apply your patch to the uniform and secure with tape or a pin

Place the patch in the correct position on your uniform. Then secure it with a clothing pin or fabric tie. Make sure the patch is firmly in place. In general, it’s easier to work with tape; No need to sew around the needle and worry about it bumping you.

Step 3: Have the thread ready and cut it into a single piece if you like

Cut the prepared thread into a single piece about 45 cm long. Don’t go longer than that because it can get tangled easily. If you don’t want to cut the thread, you can leave it in the spool and sew at the same time. This can be a good idea if you’re more worried about having to rethread your needle if you run out of thread halfway through.

Step 4: Pass the thread through the eye of the needle and secure with a knot

Pass the thread through the eye of the needle and secure by tying a knot at the end of the thread length. Having a needle threading accessory handy can save you time and effort. Otherwise, twisting the end of the threat and slightly wetting it with your mouth helps. This should temporarily hold the thread stands together and make it easier for you to thread the needle.

Step 5: Start sewing from the inside of your uniform and work your way to the outside

Poke the threaded needle from the inside of your garment out and through the patch. Make sure you don’t do the opposite and go from the outside in as you want the knot of the threads to be obscured.

Step 6: Continue sewing in a straight stitch pattern all around

Continue sewing in a straight stitch pattern. This pattern is the easiest and quickest way to keep the patch on your uniform. Also, it is the least visible to make your patched uniform beautiful. Sew around the patch to finish where you started.

This step is the most time-consuming, but rest assured that the more effort you put in, the better the result will be.

You need to make sure the length of the stitches and weaves are as even and consistent as possible. This will improve the look of your patch.

Step 7: Secure the patch with a tight knot and trim off the excess length

Finally, tie a knot in the thread by forming a loop and pulling the needle to tie it off. Check that your knot is tight, then trim the hanging ends of the thread. Again, about a centimeter should be left so that the threads do not burst and get ruined. You can tuck the excess length under the patch if needed.

Conclusion

Now you can make all changes to military uniforms with sewn patches. Hopefully this article on how to sew a patch onto a military uniform has been of some help. Even if you have old military uniforms and don’t know what to do with them, this article might help you! Before you go, comment below with your thoughts and follow-up questions!

5/5 – (3 votes)

Brownies (7-10)

Brownies are about trying new things that teach girls about themselves, their communities, and their world

Patches are a great way to add personality and color to a garment. It could be that you have an old jacket that you want to personalize, or you have kids that want custom made garments or backpacks with patches from their fandoms. But what if you don’t want to sew these patches onto your clothes?

While sewing patches onto clothing is the best option when you want a more durable garment, it does have its downsides. Anyone short of a needle and thread can panic modifying such clothing. It could go wrong and get messy pretty easily. It’s totally understandable if you want an alternative solution to applying patches without sewing. So what are your options?

How to attach patches without sewing.

The good news for anyone who doesn’t like the idea of ​​sewing patches onto clothing is that there are some great alternatives. You can get some products that fuse or stick the patches onto the product without too much difficulty. You can see some of them below. I’ve provided a brief introduction to the different shapes so you can decide which one is best for your needs. Just be aware that while many people find no-sew methods to be the easiest and less time-consuming option, there are still risks and you need to be careful.

How can you attach patches without sewing?

There are three common options for those who want to apply patches without sewing them. They are:

Fabric safety belt

textile glue

velcro tape

Each option has pros and cons, so it helps to get a better idea of ​​the process and likely outcomes first. From there, you can search online for the best patch adhesive materials and find one that best suits your needs and budget.

Iron-on patches with fabric securing.

This is a popular option when dealing with patches. Fabric Fuse Material is a beautiful thin mesh that adheres to the material of the patch and garment to create a strong hold. You can also use this material to hem clothes because the process is so easy. You simply glue the webbing to the materials and press them together.

I like this option in the right situations. You may find that you get a nice flat surface that you hardly notice the patch is attached to. However, you must be careful how you use the material, as you will see later. Here you can also learn how to make iron-on patches.

Use fabric glue.

Alternatively, you can glue the patch to your material for a strong bond. There are some great glues that are specifically designed for use with fabric. You may also find that there are some that work better with denim or other fabrics. Just make sure to find the best fit so you don’t damage your clothes in the process.

With Velcro.

The term Velcro may be more familiar to you than the term Velcro. It turns out that Velcro is one of those examples of a brand name that has become synonymous with the type of product. In any case, this is a possible solution to attach patches without sewing them. You need to be sure here that you have a self-adhesive Velcro strip, otherwise you’ll need to get fabric glue as well.

Personally, I’m not enthusiastic about this approach, except in certain situations where it’s the most practical solution. The negative side of using velcro for your patches is that you have a very thick layer between the patch and the jacket. This will not look as good as a glued on patch that sits flush with the surface of the garment.

However, there is an option to make the patches interchangeable. You can permanently attach a surface to a backpack with hooks and then switch between a series of patches with the loop material on the back. These patches need to be the same size and shape, but this might work well for kids who want to change up their looks.

How to apply no-sew patches with these 5 products

1) iCraft PeelnStick Fabric Backup Sheets

This first option is great for those interested in the idea of ​​fabric fuse sheets, as you have two large sheets, 8.5 x 12 inches, where you cut them, peel off the backing indicator, and then press the material to attach it together.

2) Thermoweb Peel n Stick adhesive sheets

That’s pretty much the same thing with a similar amount of webbing. You will receive 4 sheets measuring 8.75 x 5.5 inches. While the focus of the description is on crafting and scrapbooking, some users have seen great results with patches when using an iron.

3) iCraft Fabric Fuse Liquid Glue

Since the iCraft webbing is so popular, I wanted to include this liquid glue as an alternative. This product is easy to apply and creates a strong bond with a clear finish. It’s also non-toxic. You only get 2.1 fl.oz, but this is an affordable option for casual projects.

4) Aleene’s Fabric Fusion Adhesive

Get more bang for your buck with this alternative 8-ounce glue. Therefore, it may be preferable if you make a lot of apparel with patches or need glue for other applications. You can achieve a great result if you are happy to let the garments dry for a while. This may be preferable to quick-drying options that cannot be changed once applied.

5) Qidisgoy hook loop strips with adhesive

These strips are great because you only need to trim the length and width for a neat look. You get a lot for very little, it’s a lot of 12 cut into 7 inch strips. They are also self-adhesive for added ease of use.

Important tips to get the best possible result from your patch.

1) Take your time applying for a clean and precise finish.

Whichever option you choose to attach the patch, whether it’s webbing, adhesive, or an off-brand version of Velcro, you need to be careful. Try your best to cut the webbing in line with the edge of the patch. This means there are no unsightly overlaps to deal with. Also, try to cover every inch of your back. Use a craft knife for a cleaner look than scissors. As for the glue, you have to be careful not to use too much so that it starts seeping out the sides when you press it onto your clothes. At the same time, you should not use too little so that the edges peel off.

2) Be very careful with your placement because there is no turning back.

This is the most nerve-racking part of the process when you have a very specific goal in mind with the final look of the garment. Some designs and placements are more difficult than others, especially when you have text that needs to be straight. Some bags and jackets can benefit from a more haphazard approach and whimsical design. Once the patch is in place, there is no turning back. It’s not like a sewn-on patch where you can undo the selection and re-adjust it. The adhesive is permanent until it wears off.

3) Keep in mind that some of these solutions are more durable than others.

The strong adhesion of the textile adhesive is ideal for strong attachment to children’s clothing. These patches should be worn a lot without having a noticeable effect. However, this will not be the same for Velcro and webbing. The properties of the webbing deteriorate over time and regular washing does not help. You can see that the corners are peeling off a bit. As for velcro, if you’ve ever had velcro on shoes you know how messy and flimsy they can get over time. The fluffy side can get messy and trap dirt, hair, and other fibers.

Before I summarize some final thoughts on applying no-sew patches, I would like to recommend one more guide. If you like the idea of ​​using fabric patches to iron-on patches onto clothing, you might also be interested in learning how to make iron-on patches. Creating your own patches from scratch instead of ironing onto pre-made products can be a very rewarding experience. Check out my guide for ideas on how to create these designs using different methods for some great custom made garments and bags.

What is the best way to attach patches without sewing?

As you can see I’m not a big fan of the velcro and would only recommend it for those interchangeable patches on pockets. But maybe you feel that this solution is perfect for your projects. Tissue securing tape is a good option in the right situations because it’s so easy to use and you get a good result – even if it doesn’t last forever. Finally, there is the fabric glue. I say if you have a patch you love and want it as a more permanent addition to your garment, this is the best option.