Are you looking for an answer to the topic “ideal standard alto toilet seat soft close“? We answer all your questions at the website https://chewathai27.com/ppa in category: https://chewathai27.com/ppa/blog. You will find the answer right below.
Table of Contents
Is ideal toilet seat soft close?
Built to stand the test of time, the Ideal Standard toilet seat is available with standard or soft close depending on your preference and has a streamlined appearance. With its white finish, it can fit in with your existing washroom design and its plastic material is easy to clean and maintain.
Do soft close toilet seats fit all toilets?
No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying.
Why do soft close toilet seats stop working?
Soft-close toilet seats have hinge dampers that help control the speed at which your seat closes. If your slow-closing toilet seat is slamming shut, chances are these dampers need tightening.
How do I know which Ideal Standard toilet I have?
Carefully remove the toilet tank lid and set it gently on the floor, with the bottom facing up. Look for the manufacturer name or a number on the bottom side of the water tank lid.
DIY Basics: How to Replace a Toilet Seat
How to find your toilet manufacturer and/or model number: Carefully remove the toilet tank lid and gently place it upside down on the floor. Look for the manufacturer’s name or a number on the underside of the water tank lid. It can be stamped into the cap or painted on – sometimes even handwritten if the gas cap has been replaced by a forward-thinking plumber.
If there are no numbers on the tank cap, grab a flashlight and start looking inside the water tank itself. Most often you’ll find the manufacturer’s name or number (either stamped or painted in waterproof paint) above the waterline, but some of them are below the waterline or behind the inflation valve. Take your time and tilt the flashlight so you can see stamps better. Some manufacturers even stamp the number on the bottom of the tank, so be sure to look directly inside the tank as well.
Sometimes you can take a cloth (don’t use your hands for rough spots on the porcelain) and wipe the inside of the tank. This doesn’t actually clean the back of the tank interior, but it will leave dirt in the crevices or indentations where the number is located, which will help you find it and/or make it easier to read.
Note that a large number of modern toilets have the manufacturer’s name in small print on the bowl between the toilet seat mounting screws (but ignore any names printed on the seat itself as they are not usually of the same brand as the toilet are!) – This can at least get you on the right track to finding your model number, either by contacting the manufacturer or using one of our toilet picture sites.
If you have a signature toilet like the ones pictured below, you may be able to find your model number simply by browsing our toilet picture pages.
If you just can’t find any information about your toilet, check out our guide to finding ‘fit’ toilet parts for further help and a handy checklist of all the information we need from you to help you.
American standard
briggs
caroma
case
crane
Eljer
tanner
Charcoal burner
Mansfeld
porter
pool
Universal Rundle
Handy Tip: Once you find your model number, press “CTRL” and “F” on your keyboard at the same time to search on this page.
Do you already know your manufacturer? Do you have a part number or just want to find your parts quickly? Use the links to jump directly to this manufacturer.
Note that manufacturer numbering conventions are generally different, but there can be more than one manufacturer with the same number (especially if you only have a partial model number). Carefully compare the shape of your toilet tank to the images and diagrams (where provided) on our toilet parts pages to ensure you receive the correct parts.
American standard toilet model numbers
View our full listing of American Standard toilet parts
Briggs toilet model numbers
View full listings for Briggs toilet parts
4130
4130
4132
4134
4135
4140
4142
4143
4400
4404 4411
4430
4431
4432
4433
4434
4435
4440
4441
4442 4443
4444
4445
4460
4461
4484
4488
4490
4492
4494 4496
4800
4802
4804
4805
6000
6001
6002
6003
6004 6005
6006
6011
6012
6014
6080
6083
6085
6088
Case toilet model numbers
View full listings for Case toilet parts
Caroma toilet model numbers
View full listings for Caroma toilet parts
Crane toilet model numbers
View full listings for Crane toilet parts
3119
3153
3186
3192
3217
3227
3229
3245
3246
3436
3437
3438
3439
3501
3502
3543
3544
3545
3546
3549
3592 3593
3652
3654
3655
3663
3673
3693
3740
3741
3742
3743
3746
3762
3763
3772
3773
3780
3782
3783
3790
3792 3793
3811
3813
3814
3820
3842
3843
3845
3846
3847
3848
3852
3853
3854
3855
3856
3862
3930
3931
3932
3943 3944
31002
31054
31055
31056
31062
31063
31079
31086
31087
31088
31147
31148
31242
31243
31246
31352
31353
31362
31363
31372 31373
31512
31542
31543
31552
31553
31554
31672
31676
31682
31686
31692
31740
31742
31743
31744
31746
31822
31892
32002
Case toilet model numbers
View full listings for Case toilet parts
Eljer toilet model numbers
View full listings for Eljer toilet parts
Gerber toilet model numbers
View our full list of Gerber toilet parts
Kohler toilet model numbers
View our full listing of Kohler toilet parts
Mansfield toilet model numbers
View our full list of Mansfield toilet parts
Porcher toilet model numbers
View full listings for Porcher toilet parts
Toto toilet model numbers
View our full Toto toilet parts list
Universal Rundle toilet model numbers
View our full listing of Universal Rundle toilet parts
How do you tighten a toilet seat with no access underside?
In these situations, you can hold the nut in place with a pair of pliers while using the screwdriver to tighten the bolts. The wing located on the nut will prevent the bolt from turning back on itself by locking it in place. Again, keep tightening the bolt until the seat feels secure.
DIY Basics: How to Replace a Toilet Seat
If you need guidance, read on for our guide.
Can you learn how to tighten the toilet seat without access to the underside?
You absolutely can! You may feel better knowing that tightening the toilet seat without an access base is not difficult, although the screws may not be in an intuitive place. Often many toilet seats have small holes for access from the bottom that have just been hidden from your view.
There are other types of toilet seats that may have slightly different holes and fittings, but with a little guidance you can certainly figure those out too!
Before we get to our step by step guide on how to put on the no access bottom toilet set, let’s consider what types of tools are required for this project.
Read on for valuable information!
Is there a tool to tighten toilet seats?
Luckily, you don’t need any special tools to tighten toilet seats. In fact, you may already have them around the house or in the garage.
To create your own toilet seat fastener kit, get an adjustable wrench or socket, a flat head screwdriver and pliers as that should be all you need to tighten these toilet seat hardware.
And while it’s not necessary, you can consider wearing protective gear like gloves and goggles so your hands and eyes don’t encounter any fragments of anything coming off your toilet in the process.
How do you attach a toilet seat with concealed hardware?
Step 1: Check the toilet again
Since most regular toilets have holes somewhere for access from below, the first thing you should do again is to look for them around your toilet. A common place to look is on the seat hinges, where there may be hidden buttons you can press to dislodge the lid and reveal the mounting studs and screws.
In some cases, there are toilet seats with special covers that you may have to slide to the side or simply pry up to access the fittings below. These covers protect the mounting bolts from anything that could damage the locks. In this situation, carefully look for a round-cut piece to locate the covers.
The instructions above work well for most floor-installed toilets, but if yours is in-wall installed, you may need to remove the toilet from its mounting base. The holes for tightening your wobbly toilet seat should be on the screws that attach the toilet to the wall.
Step 2: Readjust the seat
Now that you’ve found the bottom access to the toilet seat screws, you can adjust the seat before tightening everything back up. If you find that your seat is out of alignment, you probably want to true it. You can use clamps to hold it in place.
Step 3: Tighten the screws
Once you have the toilet seat centered, you can start tightening the screws. A flathead screwdriver would be best here, but if you find that a different screwdriver head works better, go for it as you don’t want to damage the screws and shorten their lifespan. Tighten the screw until it can no longer be screwed in.
In the lower entrance of some toilets, e.g. B. Soft close toilets, a special wing nut can be adjusted to get a more secure fit for your toilet seat. In these situations, you can use pliers to hold the nut while you use the screwdriver to tighten the screws. The wing on the nut prevents the bolt from turning back on itself by locking it in place. Re-tighten the screw until the fit feels secure.
Step 4: Check the tension
By now your toilet seat should be secure again. But before you pack your tools, check the tension by banging on the screws to see if anything moves. If this is the case, retighten the screws as much as possible. When everything seems secure, close the lid, making sure nothing is preventing it from closing properly. Then you are done!
How do I stop my toilet seat from moving sideways?
As an additional accessory you only need two adhesive disks. First, locate the screws that attach the toilet seat to the bowl. Then use your flathead screwdriver to hold the screw in place while you remove the nut underneath.
If it’s just a plastic nut, you can probably remove it by hand, but if it’s particularly tight or metal, use your pliers to twist it. Now remove the lid, clean the ceramic thoroughly and put the seat back in place. Put the screws back in the holes and then take your washers.
Peel off the pad and then slide each screw down until it reaches the bowl. Finally, simply tighten the nut as tight as you can, which will secure the bolt and prevent the seat from slipping.
How do you fix a toilet seat that keeps falling off?
The most common reason a toilet seat keeps falling off is that the seat was placed too far back on the tank. All you have to do is unscrew the seat, pull it forward as far as you can, then tighten securely.
Is there a standard toilet seat size?
Typical width: 14″ – 14-1/2″ Typical round length: 16″ – 17″ Typical elongated/extended length: 18″ – 19″
DIY Basics: How to Replace a Toilet Seat
However, your friends here at PlumbingSupply.com® are here to help with a quick guide on how to correctly measure a new toilet seat. You can either use your existing seat or, if you have a new toilet without a seat, use your toilet bowl. However, it is important to understand that these measurements and the measurements of the toilet seat you purchase may not always match 100% exactly. The majority of toilet seats available (even those sometimes included with new toilets) are made by secondary manufacturers, not the same company that made the toilet. Therefore, there may be minimal dimensional variations to allow the seat to fit a larger number of toilets.
All you need to get started is a tape measure, pen and paper. Then just follow the instructions below to make sure you get the right numbers. We have provided basic guidelines for most toilet seats. So if your numbers vary significantly from these ranges, or if you have an unusually shaped bowl, please measure again or contact us if you need further assistance. Additionally, you can always browse our full list of toilet seats for brand specific toilet seats, decorative toilet seats, or any other hard-to-find seat for older toilets.
Guide to measuring your existing toilet seat or toilet bowl
How do soft close hinges work?
How Do Soft Close Hinges Work? Soft close hinges have a mechanical device built into the hinge that prevents a cabinet door from slamming. It slows down the door and shuts it ‘soft’. These devices are also sometimes called self closing hinges.
DIY Basics: How to Replace a Toilet Seat
How do soft close hinges work?
Soft close hinges have a mechanical device built into the hinge that prevents a cabinet door from slamming shut. He brakes the door and closes it “gently”. These devices are also sometimes referred to as self-closing hinges.
Why should you upgrade?
I remember the first time I closed a closet door with soft close hinges and it was amazing! The closet door closed slowly and quietly by itself. Maybe I’m just a nerd, but I’ve been obsessed with soft-close hinges ever since.
Installing soft-close hinges on your cabinet doors is an upgrade you’ll appreciate every day.
Compared to the high cost of most kitchen renovations, this DIY project is very affordable. Adding soft-close hinges to cabinets in a kitchen will make it feel a little more gourmet without breaking the bank.
Can you DIY this project yourself?
Yes! This is the perfect project to tackle yourself as a DIYer. Certain home renovation projects involve expensive equipment, advanced technical knowledge, or safety risks… but this is not one of them. Some projects are better left to the professionals, but I recommend trying this one for yourself if you have some DIY motivation and a few basic hand tools.
The hardest part of this project is choosing the right hinges to match your furniture style. This tutorial is designed to help you choose the right hinge hardware that is compatible with your cabinets and then walk you through the steps to install it. Let’s start!
Related: How to Add Under Cabinet Lights (In 30 Minutes!)
How to choose the right hinge
Choosing the right hinge for your cabinets is important. There are different types of cabinets and doors that require unique hinge styles. If you don’t use the right style, it won’t work with your cabinets.
face frame, frameless, partial overlay, full overlay, insert, compact, long arm… WHAT????
All the closet terminology might seem intimidating at first, but don’t worry, it’s easier than it seems! In the steps that follow, this tutorial will give you all the information you need to choose soft close hinges that will work with your cabinets.
Step 1: Identify your closet style
Do you have “Face Frame” or “Frameless” cabinets?
The first step in choosing the right hinge for your cabinets is to determine whether you have framed or frameless cabinets.
Most standard cabinets in the United States are of the face frame style. They are called “face frames” because a wooden frame is built on the front of the case. In this type of cabinet, the door hinges attach to this frame.
Frameless cabinets (also called European, Modern, or Flat Panel) have hinges that attach directly to the walls of the cabinet body.
The following images will show you the difference between a face frame and a frameless closet.
The hinge is attached to a panel on the front of the face frame housing.
The hinge attaches directly to the wall of the frameless cabinet.
face frame cabinet
Frameless closet
Both images above use “hidden hinges”. They are called hidden hinges because they are not visible when the cabinet doors are closed. If you have exposed hinges that are visible when the cabinet doors are closed, it’s possible to convert them to hidden hinges if you prefer the hidden style. This conversion requires some additional steps. The conversion process is fairly simple and is covered in detail in the How to Install Hinges section.
Step 2: Determine the style of the cabinet doors
Are your cabinet doors: standard, full overlay, or inset?
The second step in finding the right soft close hinge is to determine what type of cabinet doors you have. Use the images below to determine what type of cabinet doors you have. Each of the 3 styles requires a unique soft-close hinge design. “Partially overlay” cabinet doors are also referred to as “standard”. Partially overlay doors are the most common style in American closets.
The following images show you the difference between: fully overlay, partially overlay and recessed cabinet door.
These illustrations show front framed cabinets, but the door function is the same as frameless cabinets. Imagine the doors without the frame on the front of the cabinets.
Cabinet door styles: front view
Cabinet door styles: top view
Choose high quality cabinet hinges
When writing how to install soft close hinges, I wanted to find the best affordable products that we can recommend to our readers. I started by testing several cheap soft close hinges from Amazon.
All of Amazon’s inexpensive soft-close hinges felt clunky. They just didn’t seem to work well. Some only seemed to work if you gently close the cabinet doors. Others didn’t work well on the large closet doors. Those cheap hinges just weren’t the amazing upgrade I was hoping for.
Next, I tested some of the more professional brands used in high end cabinets. IMPRESSIVE! What a difference. What I learned is that choosing quality soft close hinges is very important!
Step 3: Choose a hinge style
Do you want compact hinges or long arm hinges?
This step is a matter of preference, not compatibility. Both types of hinges will work with your cabinets. The choice depends mainly on price, quality and performance. The pros and cons of both styles are listed below.
Long arm hinges – a premium option
Long arm hinges are also sometimes referred to as Euro or European style hinges. They are strong, durable and accommodate a large, heavy-duty hydraulic soft-close mechanism. Long arm hinges are typically used in high quality cabinets. Aside from being more expensive, the only downside to long arm hinges is that they are physically larger and take up a bit more closet space. Unless closet space is extremely limited, it doesn’t matter.
I tested several long arm soft close hinges and found that some performed better than others. My biggest gripe with some of the hinges was that the cabinet doors had noticeable resistance when opening. This made using the cabinet doors a bit awkward. There were also hinges that seemed overpowered by larger doors and slammed, defeating the purpose of adding soft-close hinges.
After all the testing, one brand stood out as the clear winner. All of the Blum hinges were excellent and seemed to perform better than the competition.
The winner: I recommend using Blum hinges – especially the BLUMOTION soft-close hinges. These Blum hinges are made in Austria and you can feel it! BLUMOTION’s hydraulic soft-close mechanism is perfectly smooth and works exactly as it was designed. In my opinion, Blum hinges offer the best value for money because they’re not super expensive and they feel the best overall.
Best Soft Close Hinge Recommendation:
Face frame, partial support: Blum BLUMOTION Long Arm – Soft Close
Frameless: Blum BLUMOTION Long Arm – Soft Close
Note: These are the two most common hinge styles. Please follow the steps under Choosing the Right Hinge to ensure you get the right hinge for your cabinets.
Compact hinges – a budget option
Compact hinges are small, simple and affordable. They work well but aren’t quite as smooth and sturdy as premium long arm hinges. Depending on your budget for this project, compact hinges might be worth considering as they cost about half as much as long arm hinges.
With compact soft-close hinges, the hydraulic mechanism resides within the hinge itself. This design has an inherent space limitation for the hydraulics. Because of this smaller size, performance suffers.
We tested Blum hinges – specifically the Blum BLUMOTION compact hinges. They were installed in our kitchen for about two weeks. The soft-close hinges worked well and proved to be a handy upgrade compared to standard non-soft-close hinges. If you are looking for a cheaper option, the compact Blum hinges are your best choice!
The biggest downside to compact soft-close hinges is the slow recovery time.
Recovery time: the time a cabinet door must be open before the soft-close mechanism becomes operational. If a hinge is closed before it is “recovered,” the soft-close feature will not work properly (or not at all).
A slow recovery time means that if you quickly grab an item from the closet and close the door within 1 or 2 seconds, the hinge will not work properly and the door will slam like a regular ol’ non-soft-close hinge!
All of the compact hinges we tested had relatively slow recovery times, but some were far worse than others. Times ranged from about 2 seconds to over 5 seconds. The Blum BLUMOTION hinge was the fastest recovering compact hinge.
For comparison, the Blum BLUMOTION Long Arm Hinge achieved an instant recovery time of 0.0 seconds, making it my top overall recommendation.
To learn more about Blum, you can visit their website for a full list of products and details.
How to install soft close hinges
Installing soft close door hinges is a relatively easy project that can be completed in a weekend. Some projects are best left to the professionals, but this is the perfect kitchen upgrade for any DIY enthusiast with basic hand tools and a drill.
installation tools and accessories
Step 1: Remove old cabinet door and hinges
Begin by removing the closet door from the closet. Small wood screws are used to attach the hinges to the cabinet with small wood screws. I recommend using a drill and a #2 Phillips bit for this job, but an old-fashioned screwdriver will do the job as well.
Next, remove the old hinges from the cabinet door.
Step 2: Drill a 35mm (1 3/8″) Hole
If your old cabinets already had concealed hinges (aka concealed hinges), there should already be a 35mm hole for the new hinges. If you are converting to concealed hinges for the first time, you will need to drill new holes with a 35mm adjustable depth Forstner bit.
Cabinet doors already have holes Drills should be checked for depth. Traditional non-soft-close concealed hinges are often flat, so you may need to drill the hole further down.
Step 3: Install the hinge in the cabinet door
After removing the old hinge and drilling the 35mm hole to the correct depth, you are ready to fit the new soft-close cabinet door hinges! This is a pretty easy step. As long as the hole is drilled correctly, the soft-close hinge should snap into place with a little persuasion. It should be a sung seat, but it shouldn’t take a ton of force to get it in place.
You should be able to push the hinge into the hole by hand. If the hinge is stubborn, you can tap it with a rubber mallet. If the rubber mallet isn’t enough, the hole probably wasn’t drilled properly.
Make sure the soft close hinge is properly seated and flush with the top of the cabinet door. Once it’s lined up correctly, you can attach it. Use the small wood screws that come with your Blum Soft Close hinges.
Step 4: Install the clip-on mounting plate
The next step is to install a mounting pad on the cabinet. The image above shows a mounting plate that is installed on a front frame cabinet. The mounting plate mounts directly to the face frame.
It is referred to as a “clip-on” mounting plate because the cabinet door clips onto the mounting plate after installation. This makes installation a lot easier compared to standard hinges that require you to hold the cabinet door while you attach the hinge to the cabinet!
Use the screw holes from the old hinges you removed to center the new mounting plate in position on the cabinet. Before attaching the mounting plate to the cabinet with a wood screw, pre-drill with a 5/64″ or 3/32″ drill bit to avoid cracking the wood.
Step 5: Clip hinges into mounting plates
This is the easiest and most satisfying step! Hold the cabinet door with one hand and one of the soft-close hinges with the other hand. With a large closet door, it can be helpful to have a second person to help hold the door and guide it into place. Slide the soft-close hinge into the mounting plate, and then press into the plate to snap into place.
If the hinges are not perfectly aligned with the mounting plates, you may need to loosen the screws on one or both mounting plates and adjust as necessary. Clipping the soft-close hinges into the mounting plates is easy as long as they are properly aligned. As an added bonus, the cabinet doors are just as easy to remove for cleaning or other reasons.
Step 6: Test Out Your New Soft Close Hinges!
Voila! You are done. Test your new soft close closet doors to make sure they work properly, then enjoy!
Tips for success installing soft close hinges
Make sure you choose the right style of hinge that is compatible with your specific cabinets.
Choose a quality hinge that offers a great user experience. Cheap hinges usually don’t work well.
Always use the correct PPE (Personal Protective Equipment) and use safe practices when working with power tools.
Use the right tools and accurate measurements to make the cabinet doors work properly and fit your cabinets perfectly.
Be careful not to overtighten the wood screws! Dealing with stripped screws is a nightmare.
UP NEXT: Renovating a kitchen on a $10,000 budget
How to install soft close hinges on your cabinets
What does quick release toilet seat mean?
What is a quick release toilet? These are toilet seats that feature quick release technology. As the name suggests, the quick release technology incorporated in some toilet seats allows you to easily remove the toilet seat thanks to an innovative hinge mechanism.
DIY Basics: How to Replace a Toilet Seat
Quick Release Toilet Seats are here to make your life easier. Therefore, in this article we will explain how.
Surely everyone knows the importance of good hygiene in the bathroom. Especially since these germs and bacteria can cause serious illnesses. Plus, we already know how uncomfortable it is to walk into a dirty bathroom.
We find these pathogens in the bathroom, especially in the most inaccessible corners, such as under the toilet seat. However, cleaning in this area is very difficult. In fact, until now, the only way to get there was by thorough cleaning, and even then there is always some dirt left behind.
What is a quick release toilet?
These are toilet seats with quick release technology. As the name suggests, the quick release technology built into some toilet seats allows you to easily remove the toilet seat thanks to an innovative hinge mechanism.
How does it work? What makes them different?
The toilet seat consists of two main parts: the seat with the lid and the hinges. In fact, the secret lies in the hinges and lid mechanism.
The hinges consist of two discs with rods into which we insert the toilet seat. These hinges are attached to the toilet bowl and have a groove to lock the seat so that it doesn’t come out if we don’t want it to. To remove the seat, all you have to do is press a button on the underside of the seat to unlock and easily remove it.
Why should I get a quick disconnect toilet?
By now you can imagine why you should get a quick release toilet seat, right?
Even when you think you’ve cleaned the toilet thoroughly, you know deep down that a lot of dirt will still accumulate in those inaccessible nooks and crannies. It makes cleaning easier and ensures that your toilet is perfectly clean. You can remove the seat in one easy movement with just a push of a button to unhook it and access the space under the seat.
In addition, these seats are usually equipped with soft closing. Do not you know? Soft closing is another feature, a mechanism that slowly lowers the lid and prevents the lid from slamming shut causing annoying noise or damage to equipment. No more sudden noises when you go to the toilet at night!
Which one should I take?
Here we show you some seating furniture from well-known brands, quality products with an attractive design for every bathroom.
First and foremost is the Grohe Bau Ceramic toilet seat with soft closing and quick release and a slim design. It’s also made from Duroplast and comes with a 5-year warranty. Alternatively, this elegant and functional design and quality is also available in another version without cushioning.
Secondly, this is the Villeroy and Boch Avento D-shaped toilet seat, which features Soft Close technology and is made of Duroplast.
In third place is the Sento toilet seat from Vitra with its ultra-flat design. In addition to its slim design, it features soft-close technology.
Finally you have this square toilet seat Euro Ceramic from Grohe for compact toilets made of Duroplast without soft closing.
Give us your opinion, do you think it’s worth it? Let us know in the comments.
How To Fix Soft Close Toilet Seat
See some more details on the topic ideal standard alto toilet seat soft close here:
Ideal Standard Alto Toilet Seat for sale – eBay
Buy Ideal Standard Alto Toilet Seat and get the best deals at the lowest … Ideal Standard ‘Alto’ Resin Replica Seat in OLD ENGLISH WHITE with SOFT CLOSE.
Source: www.ebay.co.uk
Date Published: 10/4/2022
View: 4780
Alto Soft Close Toilet Seat – Ideal Standard – Victorian Plumbing
A stylish toilet seat designed for use with Ideal Standard Alto toilet pans. Featuring a soft close mechanism, this practical and durable seat can withstand …
Source: www.victorianplumbing.co.uk
Date Published: 12/22/2022
View: 1446
Ideal Standard Alto Toilet Seat – E759401 – Bathroom Planet
Features. Manufactured from Plastic; Comes in White finish; Soft Close model; Curved Shape; Feature standard closing bottom fix hinges; Wth: 395mm …
Source: www.bathroomplanet.com
Date Published: 5/17/2022
View: 6195
Ideal Standard Alto Toilet Seat And Cover – E759401
COMMERCIAL DEPOT SHIPPING CHARGES AND OPTIONS
Trading Depot currently only offers UK delivery.
All small stock items are shipped directly from Trading Depot to the customer unless ordered together with larger items or FREE Click & Collect from Trading Depot is selected at checkout.
Region Delivery Service Delivery Cost (incl. VAT) UK Mainland (England, Wales, Scotland) Trading Depot Standard Delivery (2-4 working days) £7.95 UK Scottish Highlands and Islands Trading Depot Standard Delivery (2-4 working days) £16 UK Jersey, UK Guernsey, UK Isle of Man, UK Isle of Wight, UK Isle of Scilly Trading Depot Standard Delivery (2-4 working days) £25
Special Orders: Please note that some special orders have longer delivery times which are clearly stated on the product page.
DELIVERY EXCLUSIONS
Unfortunately, delivery to the following UK regions is not offered at checkout. If you would like to place an order for any of the regions listed below, please contact customer service.
Excluded Regions: United Kingdom Northern Ireland.
FREE CLICK & COLLECT FROM TRADE DEPOT
FREE click and collect at Trading Depot’s Maidenhead warehouse is also available. Simply select this option at checkout and your items will be ready for pickup in 1-2 business days (provided the item is in stock at the time of order). You will be contacted when your order is ready for collection.
RETURNS
We offer an unconditional 14 day return policy on all goods supplied, subject to a few minor exceptions. Returned products must be in their original packaging. View full details of our returns policy and learn how to request a return.
REFILL FEE
A restocking fee may apply to returns of this item.
Important Disclaimer: All delivery dates are approximate and not “guaranteed”. We try to inform our customers as best we can about any changes or delays in delivery. Trading Depot shall not be liable for any costs incurred as a result of such delays in waiting for goods. For this very reason, Trading Depot strongly advises against booking traders before goods have been safely received and inspected.
Ideal Standard Alto soft close toilet seat with cover White
We use cookies on our website. By continuing, you agree to the use of cookies. Visit our Policy page to learn how to manage cookie settings.
DIY Basics: How to Replace a Toilet Seat
How to replace a toilet seat
Installing or replacing a toilet seat is a fairly simple task. Whether you are replacing your toilet seat because it is old or damaged, or you want a new style; All you need are some basic tools.
Installing a toilet seat is often one of the easier and quicker DIY jobs to do in your bathroom and can be completed in minutes.
Read on for our full guide explaining the steps of the process…
Why should I replace my toilet seat?
Toilet seats can be replaced for a number of reasons. These may include the seat being broken or cracked, the fasteners may have disappeared causing it to wobble and move when you sit on it, or you want a new style.
Read more: Update your bathroom on a budget
If you’ve had a new bathroom installed the seat will likely be made for you, but if not this is another reason to install a seat in your loo.
Do all toilet seats fit the same?
No, not all toilet seats fit the same as toilets come in different shapes so you need to check yours before buying.
Read more: What types of toilets are there? Buying advice for toilets
There are three types of toilet shapes commonly found in UK homes. These are round, D-shaped and square seats. Another popular feature is a soft-close seat. So if you prefer this, you need to measure correctly to ensure this type of seat fits your toilet.
Replacement toilet seats can usually be fitted to older or non-standard toilets. However, the seat must be supported at the contact points or hinges.
Most toilet seats are oval in shape, although some have a more contemporary square or D-shape. So it’s important to keep this in mind when looking for a replacement in a store or from the original manufacturer.
Before you buy a seat, there is something important to do…
How to measure a toilet seat
This is arguably the most important part of replacing your toilet seat – you don’t want to buy one that doesn’t fit.
Are toilet seats a standard size?
No, due to different toilet styles, there is no standard size for all toilet seats. To find the best seat for your toilet, you need to measure your toilet. Read how to do this below.
There are important measurements you need, although most seats are adjustable to accommodate most common toilet bowl shapes. The measurements are:
The distance between the mounting holes – where the screws are located. This is often a standard 155mm measurement, but it’s worth checking
The width of the toilet bowl at its widest point
The length from the front of the shell back to the two seat mounting holes
With these measurements you can be sure that you are buying the right size toilet seat.
Do I need to take any safety precautions before changing my toilet seat?
Toilets are an obvious place for harmful germs to grow and can be a source of potential infection, so you should take precautions before you begin.
Always wear rubber cleaning gloves when changing a toilet seat. Ideally, clean it before removing it. After removing the seat, thoroughly clean your entire toilet. Use an antibacterial spray that you can buy at most stores.
Use an antibacterial hand wash after replacing your toilet seat to ensure you’ve removed any harmful bacteria.
What tools do I need to change a toilet seat?
You’ll need pliers or an adjustable wrench to remove the nuts that attach the seat to the toilet—these are often wing nuts.
You may also need a flathead screwdriver to remove any plastic caps covering the nuts. Most of these tools can be found in a garden shed or bought for little money at most stores.
Depending on the seat you buy, it may come with a kit to attach it. If you’re just replacing the hardware like the nuts and not the whole seat, you’ll probably have to buy the parts yourself.
Some newer toilets may not have traditional screw-on seats, but instead have a push-in seat. So it’s best to check before you buy a replacement.
How to remove an old toilet seat
Most toilet seats attach to the toilet with hardware. These are held together by two bolts, usually hidden behind plastic caps on the back of the seat.
You may have to crouch or stand on the ground to access it properly.
If there are plastic caps over the nuts, use your flat head screwdriver to remove them. This can be more difficult with older seats if they have been there for a long time. Working your way around the cap, without being too rough to damage the toilet itself, carefully remove the caps.
Once you remove the caps you will see the top of the screws with wing nuts holding your seat in place. These nuts are often made of plastic, but can also be made of metal – depending on the age of the seat. Use your pliers to loosen the nuts, then remove them by hand.
The seat should then lift off, but depending on the brand you may need to unscrew it with your screwdriver. If it’s stiff or too rusted to lift off on its own, spray some WD-40 to lubricate it and wait up to 10 minutes before lifting the seat off.
If they’re still stuck, you may need to carefully saw them off with a small hacksaw.
Some toilet seats vary in how they are held in place, but most work in a similar way. If your seat is different, take a look at the hardware and you should be able to figure out how to remove it.
It can be difficult and not the most pleasant work, but it shouldn’t take long. Just remember the process for next time.
As mentioned above, after removing your old toilet seat, give the entire toilet a thorough cleaning with antibacterial spray.
How to install a new toilet seat
Once you’ve removed your old seat, it’s time to install the new one. With the new seat you will receive hardware, including manufacturer’s instructions for installation.
Essentially, installing a new toilet seat is the reverse of the removal process.
First, line up and attach the new fittings – by inserting the screws through the toilet’s mounting holes. Make sure your seat sits evenly on the perimeter of your toilet bowl and center it. Use your hands or pliers to secure the wing nuts once you are happy with the position of the seat.
Be careful not to over tighten them as you may want to adjust them once the new toilet seat is in place. Additionally, plastic bolts – if they are – don’t need to punish much before either yielding or breaking.
You can also have rubber washers that you can place between the nut and the toilet to act as a cushion.
You will do this on both sides of the seat as there are two bolts so two wing nuts that need to be tightened altogether.
If plastic caps were included with the new toilet seat, snap them into place by pressing down on the screws onto the wing nuts.
By following these steps you should be able to replace your toilet seat quickly and easily.
toilet seat designs
No matter the size or style of your bathroom, you’re guaranteed to find the right toilet seat for your home. Available in a variety of shapes and sizes and a range of colours, from classic white to bright pink to a seat with a beautiful animal design, there is a toilet seat for every taste.
Olli Lyon
Ollie is a self-trained handyman who has a particular love for kitchen and bathroom renovations. In his free time, Ollie enjoys biking and hiking.
We love seeing your bathroom makeovers and sharing them on our Instagram page – if you’ve had a Plumbworld makeover, tag us in your photos to be featured!
We’d love to know, so why not share your favorite designs with us on social media?
Find us at:
Facebook | Twitter | Instagram | Tiktok | pin rest
Alternatively, sign up for our newsletter to receive the latest offers, latest product launches and advice.
Are you planning a new bathroom or kitchen? Shop online at Plumbworld for guaranteed lowest prices and next day delivery.
Don’t forget to read the rest of our blog for more bathroom and kitchen tips.
Related searches to ideal standard alto toilet seat soft close
Information related to the topic ideal standard alto toilet seat soft close
Here are the search results of the thread ideal standard alto toilet seat soft close from Bing. You can read more if you want.
You have just come across an article on the topic ideal standard alto toilet seat soft close. If you found this article useful, please share it. Thank you very much.
