Are you looking for an answer to the topic “inline lead carp rigs“? We answer all your questions at the website https://chewathai27.com/ppa in category: Top 660 tips update new. You will find the answer right below.
Table of Contents
Are inline leads better?
Inline leads are a fantastic method due to the fact when the carp picks up the rig, they come into contact with the heaviest part of the lead first, now this is fantastic but using inlines in the correct situations is definitely vital, due to the hook link and swivel coming out the bottom of the lead, it must be fish …
Are inline carp rigs safe?
Are inline leads safe? Most items of carp tackle are safe in the right hands, and that includes inline leads. Inline leads are safe as long as the lead can come off the end of the leader/line in the event of a crack-off or line break. (This is the case for all lead arrangements).
What is the most effective carp rig?
- ESP — TRIG-HAMMER RONNIE RIGS. …
- GARDNER — RONNIE RIG KIT — BARBED ALL SIZES. …
- NASH — CHOD RIG. …
- KORDA — BASIX HAIR RIGS WIDE GAPE. …
- CARP SPIRIT — HINGED STIFF RIGS. …
- KORDA — MULTI READY TIED RIG. …
- CARP SPIRIT — BLOW BACK RIGS. …
- PB PRODUCTS — RONNIE RIG. BEST FOR HEAVYWEIGHTS.
Is a chod rig a fixed lead?
As the chod rig is so short it is much better for the fish if the lead is ejected every time as this prevents the lead from being close to the fishes mouth and eyes whilst playing it to the bank, though a fixed lead is acceptable.
The 10 Best Carp Rigs of 2022 Reviewed
A helicopter setup is perfect when you are not 100% on the bottom you are fishing on and can be a very fish friendly method when done correctly. A number of manufacturers now offer drop off kits that allow the line to be dropped if the situation calls for it. This is the best way to set up this arrangement when using short rigs – to avoid the lead bouncing around the fish head when playing the fight, or actually avoid snagging the lead when playing the fish. The example shown here uses a fixed lead
It is important that in the event of a break the rig can detach from either the main line or the hooklink. Make sure a drop-off style bead is used and (if using a hooklink) that the rig can be passed over the knot the hooklink is attached to. Again – test it on the shore before you cast out.
After each fish, check that there is no damage to the line/lead where the rig meets the lead – this section can become weak over time and fish can get lost (and drag a rig) if this Part of cord failed.
helicopter set up
A running lead setup is the simplest rig setup and can be useful when fish start using the weight of the lead to cast your rig. A running rig should be just that – the lead should be unfixed to prevent it from slipping off the line if the fish snags or the main line breaks. The biggest mistake inexperienced anglers make is when a split shot is crimped over the lead onto the main line. This is absolutely not fish friendly and should not be used under any circumstances. The lead must be able to slide off the main line in the event of a break.
Structure of the running line
The chod rig is a type of helicopter setup that uses a small “chod” section positioned above the lead – perfect for fishing over debris or weeds. It’s also the rig most commonly misbuilt. The same rules apply to the chod rig as the helicopter rig – making sure the rig can escape the main line/rig is the most important aspect. Because the chod rig is so short it is much better for the fish if the lead is cast out every time as this keeps the lead from being near the fish mouth and eyes while playing it to bank though a solid lead is acceptable. A common mistake when using a chod rig is to peel too much line off the spool after the cast to allow the rig to lay down properly over debris. This isn’t a problem in open water, but if you’re fishing close to obstructions it can potentially result in a fish becoming tangled on the bank with little or no indication. This setup is fantastic over weed but shouldn’t really be thrown near obstacles.
Structure of the chod rig
The image here shows a drop off lead system that can be set up to either keep the lead on a take or drop it when needed. This can be used for both helicopter and chod setups. This type of end tackle is now available from numerous manufacturers and sold locally. Casting the lead should not be taken for granted – it is important that this is only used when the situation calls for it – ie when you need to avoid catching a fish in foliage, trees etc.
Drop off mechanism
In most cases a solid bag approach uses an inline running lead inside and is therefore technically a running rig setup. This is an ideal solution if you are concerned about weeds or dirt on the ground as this method is almost everywhere. In order for the rig to fit neatly in the bag, the rig itself is usually short for ease of hooking. We recommend using rig tubing when using this method as it protects the fish’s eyes and flanks while it is being driven into the bank.
Structure of the running line – PVA bag
When you arrive at a location, you usually have to try to locate the fish while considering the positioning and movements of other anglers. What is often overlooked and more important is “can you fish safely” from your chosen spot? You must consider your own safety and that of your chosen quarry. For example, it is not safe from a fish perspective to set up next to numerous obstacles with light rods and light lines while targeting big carp. Your kit must be able to withstand the likely test it will be subjected to. It’s also not safe to fish up to snags with baitrunners engaged and a pod not firmly anchored. So before you even cast, please think about what will happen if you hook onto a big fish and always ask the question… “Will you be able to land the fish safely?” Lastly, check and recheck all your nodes. It poses a risk to wildlife and fish when a knot fails, which is easily prevented. Not to mention the risk of losing the fish of your life in what is arguably the most frustrating of ways!
first of all
This is certainly one of the most common wiring arrangements and involves a few components that need to be set up correctly. The picture here shows a two-piece lead clip system. The rig tubing routes the main line up from the sleeve end and the rig attaches to a swivel at the opposite end. You can see in the picture here that the line is hooked on with an oversized swivel and the rubber boot just slides down a few notches. These two elements ensure that should the lead get caught, it will disengage from the clip. How to set up a lead clip when fishing near obstructions such as overhanging trees and lily pads etc. As you slide the sleeve over the clip, make sure it is wetted to aid in loosening. Alternatively, if you’re fishing in open water and don’t need to drop the lead, then push the sleeve firmly on to ensure you always retrieve the lead. IMPORTANT – in this case you must ensure that the swivel can slip at the rig end of the clip. You can easily test this on the bench before you drive out. Hybrid Lead Clips need to be used slightly differently – please read the manufacturer’s instructions before using these. Please note which direction the sleeve is facing – a different orientation of the sleeve almost guarantees the line will not come loose and is a dangerous way to attach this arrangement.
The lead clip setup
This example shows an inline drop-off style lead. This can be used on its own as well as in a solid bag as above. This system works on the basis that the main line/lead is not inside the lead but is attached around it. To test the safety of this rig, simply hold the rig by the hook and shake before casting. When the lead falls off, you know the setting is right.
Structure of the running line – drop-off
Tight snag fishing presents a number of problems and must be carefully considered. Sometimes the fish will dictate that this is the only place you can catch them. Start with just one bare wire. You can then cast further with your line clip to avoid hitting the hook and make sure you are as close as possible. This almost eliminates the risk of snagging on your rig – which poses a threat to wildlife if it breaks off.
Make sure your rolls are locked tight – really tight. Carp will go to the nearest shelter almost every time and if the free spool or drag on your reel is loose you have a really good chance of losing the fish and chasing the fish down a rig.
Make sure your banksticks are pressed firmly into the ground to avoid carrying your setup into the lake. While using a pod, you can use stage stands or even tent pegs to secure your rest breaks.
Consider using grip butt rests and snag ears to ensure your rod doesn’t get dragged into the lake.
Make sure you are always close to your rods and NEVER leave them unattended. It’s bad practice, especially when hook fishing.
When night fishing it is advisable to avoid hook fishing altogether as it is almost impossible to get on the rods fast enough. Fish often venture out of these areas at night and we would recommend choosing other spots.
Fishing near tree stumps
What is a fixed lead carp rig?
As the feeder is on a loop, although running for a couple of inches or more, it is fixed within this loop on the main line so by definition, a fixed lead. In carp fishing, a helicopter rig is fixed in that the lead is fixed in position on the main line.
The 10 Best Carp Rigs of 2022 Reviewed
Offline
New member
Posts: 17
Karma: 0
I ask for clarification of club rule number 10:
10. The use of bolts is not permitted.
Please understand at this point that I ask for clarification from the committee members and I have NO objection to such a rule.
I would like clarification as most modern day carp fishing rigs are actually bolt rigs and in many cases are actually fixed. Even a regular river feeder rig fished on a simple loop is usually critically balanced against the strength of the current so the rig becomes a self hooking rig, that is if the fish picks up the bait and interferes with the feeder , the current carries the feeder past the fish and makes the hook. Because the feeder is on a loop, although it runs a few inches or more, it is attached to the main line in that loop, so by definition a fixed hooklink.
When fishing for carp, a helicopter rig is fixed by attaching the lead to the main line. If you don’t succeed in casting the bait, the fish panics in front of the hook and hooks itself against the weight of the lead in a fraction of a second – a fixbolt rig in the truest sense.
I’m not trying to enlighten everyone with the mechanics of such rigs that I’ve described, just explaining how the confusion could arise. I may reconsider the rule, but of course as a new member I don’t want to break any club rules.
I had the pleasure of chatting with the Grimshaws Bailiff in April (Paul) and I really should have asked him that question but unfortunately I didn’t.
For my own carp fishing I prefer a fixed lead that attaches via a safety clip but despite the rig’s safety features it is by definition a fixed bolt rig. The built in safety clip means that if the main line breaks the carp on the other end won’t have to lug around a lead for the remainder of its (probably short) lifespan as the clip would eject the lead once it met resistance. Weed for example, but it doesn’t change the fact that the rig is still a “Fixed Bolt Rig”.
I’ve been around long enough to remember the original idea of a bolt rig and I’ve seen it become the norm as it is today, but so far I’ve only fished an inline lead rig in club waters not “fixed”, but sliding on the leader. Again, this misalignment can get as bad as a fixed lead rig. Using a bead that is too small in diameter to fit over the hooklink knot to the mainline knot would become a ‘death rig’, as would a hooklink connected to the mainline via a swivel or connecting loop like the lead not be able to pass these obstacles and free fall, leaving the fish with only a hooked link – something much less likely to get caught.
After a google search for the actual definition of a fixed bolt rig, I came across this page which seemed to be a question like my own:
www.maldonas.co.uk/?p=2236
Is the club interpretation of the rule the same as the one in the link? That said, a secure system must be built into all carp rigs, or is the rule as clear as it is printed – no fixbolt rigs?
With fish welfare in mind I now prefer to cut my safety clip very short so that only a few mm are covered by the plastic cover. This results in the lead being thrown away on the take and although this costs me a lead for every carp bite I have, the reasons are sound. Firstly, the carp doesn’t have 3 ounces or whatever on the line a few inches from their head during the fight, which can only be better for the fish as it reduces the chance of potential fish injury. Second, the lead bounces around for 5 or 10 minutes during the fight and acts as an ejector. The hopping and hopping around during the fight can and does snap the hook from its grip and I believe it can also enlarge the hook hole in the mouth which obviously increases fish damage. So the thinking is twofold, reducing the risk of fish damage and increasing the chance of landing a fish on the hook.
Once connected to the fish I am in direct contact with it and nothing but the line and hook between the fish and me as the lead has been dumped. This thinking is becoming more mainstream and the introduction of Korda’s new Helisafe clip system means the lead can now be ejected from helicopter rigs (or chod rigs) when fishing.
How does the club board feel about this? That is, the possibility of the lakes being littered with discarded leads?
Hardly backed by any scientific evidence I know of, but I didn’t think a few thousand pipes would have any impact on the lakes as they already have several million pebbles at the bottom, they are former gravel pits after all .
Thanks in advance for any replies
Paul Hi everyone, I’m looking for clarification on club rule number 10:10. The use of fixbolt rigs is not permitted. Please understand that at this point I would like to ask the committee members for clarification, NOT against such a rule are indeed firm. Even a regular river feeder rig fished on a simple loop is usually critically balanced against the strength of the current so the rig becomes a self hooking rig, that is if the fish picks up the bait and interferes with the feeder , the current carries the feeder past the fish and makes the hook. Because the feeder is on a loop, although it runs a few inches or more, it is attached to the main line within that loop, so by definition a solid lead is fixed in position on the main line. If you don’t succeed in casting the bait, the fish panics and jumps through the hook stitch and in this fraction of a second hooks itself against the weight of the lead – a fixed bolt rig in the truest sense of the word. I’m not I tried to enlighten everyone with the mechanics of such rigs that I described but simply explained how confusion arose. I might think about the rule, but of course as a new member I don’t want to break any club rules. I had the pleasure of chatting with the Grimshaws Bailiff in April (Paul) and I really should have said that to the question of him but unfortunately I didn’t. For my own carp fishing I prefer a fixed lead attached via a safety clip but despite the rig’s safety features it is by definition a fixed pin rig. The built in safety clip means that if the main line breaks the carp on the other end won’t have to lug around a lead for the remainder of its (probably short) lifespan as the clip would eject the lead once it met resistance. Weed for example but that doesn’t change the fact that the rig is still a ‘fixed bolt rig’ it is however today so far I’ve only fished an inline lead rig in club waters as it doesn’t ‘fix’ is, but slides on the leader. Again, this misalignment can get as bad as a fixed lead rig. Using a bead that is too small in diameter to fit over the hooklink knot to the mainline knot would become a ‘death rig’, as would a hooklink connected to the mainline via a swivel or connecting loop like the lead not being able to pass these obstacles and free fall leaving the fish with only a hook link – something far less likely to get snagged Question like my own: is the club interpretation of the rule the same as that in the link? That said, a secure system must be built into all carp rigs or is the rule as clear as it is printed – no fixed bolt rigs? For fish protection reasons I now prefer to cut my safety clip very short so only a few mm are covered by the plastic cover. This results in the lead being thrown away on the take and although this costs me a lead for every carp bite I have, the reasons are sound. Firstly, the carp doesn’t have 3 ounces or whatever on the line a few inches from their head during the fight, which can only be better for the fish as it reduces the chance of potential fish injury. Second, the lead bounces around for 5 or 10 minutes during the fight and acts as an ejector. The hopping and hopping around during the fight can and does snap the hook from its grip and I believe it can also enlarge the hook hole in the mouth which obviously increases fish damage. So the thought is twofold, reducing the risk of fish damage and increasing the chance of landing a hooked fish. Once connected to the fish I am in direct contact with it and nothing but the line and hook between the fish and I as the lead has been disposed of. This mindset is becoming more mainstream and the introduction of Korda’s new Helisafe clip system means the lead can now be ejected from helicopter rigs (or chod rigs) when fishing. How does the club committee feel about this? That is, the possibility of the lakes being littered with discarded leads? Hardly backed by any scientific evidence that I know of, but I didn’t think a few thousand leads would have any impact on the lakes as they already have several million pebbles on their bed to begin with, they are former gravel pits after all. Thanks in advance for any replies, Paul
What does no fixed leads mean in fishing?
It simply means the lead can’t come off without the line being broken, an inline could be used in a more complicated drop off style (unecessary). Lead clips class as semi fixed, the lead can drop off the clip without the line breaking.
The 10 Best Carp Rigs of 2022 Reviewed
You can post now and register later. If you have an account, log in now to post with your account.
How long should a solid bag rig be?
Keep the length of the rig inside the bag between 3-5inches and ensure you use a supple braid as the hooklength material. As fish are not moving far and feeding close to the lead the short hook length wallows a greater chance for the fish to be hooked.
The 10 Best Carp Rigs of 2022 Reviewed
This entry was posted on February 10, 2021 by Anna Cooper
Speed is a great aspect when fishing with solid PVA bags. Assembling a load of these bait bags will serve you well a night before a session and are sure to provide a carpet of bait carp can’t refuse. PVA is the ultimate confidence in a bag for all carp anglers!
What is PVA?
Polyvinyl alcohol, also known as PVA, is a water-soluble substance that can be made into solid sheets, ribbons, and cords, or woven into a mesh-like stocking. PVA is great for fishing as once it dissolves it leaves a neat pile of bait around your hook.
Why use solid PVA for fishing?
PVA is usually a product associated with the big carp scene but when used correctly it can be equally effective for smaller commercial carp. It’s particularly good in the cooler months when you’re trying to catch one fish at a time, it’s also brilliant on tough days when you really want or need to chop and change bait.
Check out the video below for more information on carp fishing with PVA bags below.
Attraction as well as a confidently presented rig no matter where it’s cast, the solid PVA bag is certainly a deadly method for all carp sizes and on all venues. The following tips will help you make the most of this epic tactic:
1. The size of the PVA bag is important
Make sure the contents of your bag include lots of smaller items like salmon crumbs and micropellets. Not only do these keep fish feeding around your hookbait for longer, they also allow you to pack the contents of the bag into a solid capsule that is very aerodynamic and will cast well over 100 meters with the right tackle.
2. Preparing your bait bags is key
Use nice short leadcore (or fluorocarbon) hooklinks with your rigs so you can tie loads of bags at home and then just sling them to your main line when you’re on the bank. You can have literally hundreds of these bags pretty and ready to rock and roll by the time you reach your venue, ideal for overnight stays. This saves you from tying bags around on the bank and allows you to maximize bite time and not waste valuable time. Also, make sure your hookbaits are plastic, otherwise pop-ups can shrink and increase buoyancy if left in ready-tied bags for long periods of time.
3. Added Reinforcement
Get a syringe (please make sure you’re careful) and an assortment of oils, goo and other PVA friendly liquids and inject these into your solid PVA bag before tossing it in. This will increase your bag’s pull power, giving you a liquid attractor as well as the food and hookbait in your bag.
4. Keep the rig length short
Keep the length of the rig in the bag between 3 and 5 inches and make sure you use a supple braid for your hooklink material. Because the fish don’t move far and feed close to the lead, the short hook length gives a greater chance of the fish being hooked.
Also, because the hooklink is crumpled up in the finished bag, this does not affect the presentation of a soft utility braid, whereas a mono hooklink will be kinked. Also, always use an in-line lead in a PVA bag, this will increase your rig’s hook and cast potential.
Watch the ADTV video below on how to tie a simple solid PVA bag.
5. Buoyancy of PVA bags
Typically a small pop up (12mm) or critically balanced wafter hookbait are good choices when using a fixed bag. With a small pile of pellets and bait your business end is very light and responsive when fish feed on it so it makes sense that your hookbait be the same. This results in the fish treating the hookbait with less suspicion.
Buy PVA products
We hope you found these top tips helpful! For more PVA know-how, visit the AD blog or go to Angling Direct’s Youtube for more ways to get the most out of PVA while fishing. Remember to share your success with Solid PVA bags with us on our social media!
AD Facebook AD Twitter AD Instagram
How long should a carp hook length be?
By long, we’re realistically talking an absolute minimum of 12ins (that’s 20cm, kids!) and I would suggest 14ins as a good starting point. Adding an anti-tangle sleeve will improve the presentation further, ejecting the hooklink away from the lead at all times.
The 10 Best Carp Rigs of 2022 Reviewed
If the lake has a thick layer of soft silt, a relatively short leader, say less than 10 inches, attached to a lead clip can easily be buried in the sediment.
Many fish have been caught using this method, but it can be hit and miss as success depends on the fish digging up the bait. This problem is exacerbated by the use of thick leads, the weight of which settles through silt over time.
The only benefit of dragging your rig in the silt is that it makes it almost impossible for feeding fish to inspect a hookbait.
If they are “gill deep,” how can they suck in morsels of dirt? Consequently, it can be a valid method when fishing in places with big fish pressure.
However, having your hookbait buried most of the time would inevitably increase the time it takes for a fish to find it, so we tend to actively look for clean spots to fish.
When using this classic approach to carp fishing, you can shorten the hooklengths to optimize the rig’s responsiveness.
However, you must be sure that the lake bottom is suitable. This investigative process takes time and will inevitably lead to some disruption.
Therefore, for short sessions, choosing a more versatile longer hooklength or, dare I suggest, a chod rig in combination with the smallest lead possible will bite you that the ‘foam’ of swimming on arrival invariably wouldn’t get.
What is a snowman rig in fishing?
A snowman rig is a 2 boilie setup with a standard boilie at the bottom and a smaller pop up at the top. It makes the presentation standup odd at the bottom and looks just like a snowman, hence the name.
The 10 Best Carp Rigs of 2022 Reviewed
What is a snowman rig?
A snowman rig is a 2 boilie setup with a standard boilie at the bottom and a smaller pop up at the top. It makes the presentation odd at the bottom and looks like a snowman, hence the name.
Here’s the idea of how they should look like
There is also an inverted snowman with the smaller popup at the bottom and the main boilie at the top. While this doesn’t look like a snowman, it is quite an effective presentation when fished properly. It really helps if you have some boilie extenders available to enhance the presentation.
You can see my guide to the best carp boilies and popups here to help you choose the right bait.
Snowman Rig Fishing Tips
1 – Practice and test them every time
This rig takes a little time to perfect. If possible I would always place the rig on a clear edge so you can see how it’s set up. If it’s not balanced properly, the popup can pull up the entire rig, and that’s not the idea. In this case you can add some tungsten putty next to the rig to hold it in place or use another pop up – preferred way.
You can test them out in a bucket of water at home to make sure you get the right balance. I would recommend checking each rig when you are on the bank just to make sure they are perfectly balanced. It’s easy to either add more putty or trim them slightly for a perfect fit.
2 – Flick them a bit
This is a tip I picked up from a carp magazine a few years ago (I’ve read a few so can’t remember the exact one). Cut the ends of each boilie for a smoother presentation instead of layering 2 balls on top of each other. This really enhances the presentation and can help you get more bites.
If you really want to mix it up you can cut the baits into random shapes and sizes but still act the same way. Chopped baits can be a real advantage on some venues.
3 – Mix it up
You don’t have to stick to the standard rigs, sometimes it pays to mix up your snowman rigs to get a bite. Try different sized boilies and see how they sit in the water. I occasionally use what I call the “fat snowman” rig with a 14mm dumbbell with a 12mm popup like below. Depending on your hair length, some of these will require you to use a boilie extender.
You can also mix and match the colors. The same rig metrics can be applied to a rig with floating corn on a boilie. Here are some color examples –
My personal preference is to fish a lighter colored lure on top. This has always served me well in the past and seems to get the carp’s attention.
To test things out before heading to the lake I also have an old fish tank with some gravel filled with water. I quickly add the bait to the hair rig at home and put it in to see how it looks. This saves a lot of valuable time on the bench and means I can test rigs and setups over and over again.
I’ve also been playing around with a wafter snowman for carp fishing. This plays out differently in the water due to the added buoyancy of the wafter. I carve a small opening in the bottom of the wafter and add some putty once the hair is in. This helps keep it upright, but it will bounce up and down in the water more than a regular snowman.
You can buy old tanks on eBay very cheaply and as long as you have space to store them it’s a good way to try things where you can see the rig/bait.
Here are some of the rigs filmed underwater with my Water Wolf HD – see the review here. (I know the hair is too long, no need to point that out!)
There are many more videos on my YouTube channel, just search “casual carper” to see them all.
4- Fish it over lots of baits
In the warmer months I find the snowman rig to be the perfect option for fishing over a large bed of bait. The presentation lets them sit proud and means it can be one of the first things they see when they come in to feed.
In the winter months I like to fish a snowman as a single in a tiny solid back of pellets. This gives a good level of attraction and still has the visual appearance underwater. Preheat the bottom boilie for extra attraction.
What’s the best Hooklink for carp fishing?
Coated braid is easily the most used hooklink material in modern-day carp angling. It’s very versatile and can be used to create a multitude of different rig presentations. It’s generally fast sinking, very abrasion resistive and it comes in a range of different stiffness and colours.
The 10 Best Carp Rigs of 2022 Reviewed
The slight stiffness of the material makes it a very good leader material for anti tangle and the thin nature of the material also makes it very difficult for the carp to see. Combine this with the great price and it’s a great product for the angler on a budget.
A good example: ESP Syncro XT
Coated braid
Coated mesh is by far the most commonly used hooklink material in modern day carp fishing. It’s very versatile and can be used to create a variety of different rig presentations. It generally sinks quickly, is highly abrasion resistant, and comes in a variety of durometers and colors.
A good example: Korda Soft N-Trap Coated Hook Link
elastic
One of the newest Hooklink products available. Out of the water it acts and behaves like a regular braid, but once underwater it contracts and becomes elastic, adding a new edge to a standard hooklink material.
A good example: Nash Triggalink
amnesia
Amnesia is a very stiff and rigid leader material. Mainly used to make the very popular Hinged Stiff Link, the Hooklink has been around for many years and is still as popular as ever.
A good example: Sunset Amnesia
Sleek braid
Supple braid is a really thin and soft hooklink material that is being used a lot more now than it has been in recent years. For fishing over small pieces of bait and also for short hooklengths in solid PVA bags, a supple braid is definitely the material you need!
A good example: Gardner Trickster Heavy
fluorocarbon
Fluorocarbon is a very good leader material for crystal clear lakes. The leader has a slight stiffness that helps with casts to avoid tangles and aids in hooking ability. A popular performance using fluorocarbon is the Combi Rig.
A good example: ESP Soft Ghost
How do you set up a lead clip system?
- A lead clip consists of two sections. …
- Next, thread on the lead clip part of the system.
- Attach a swivel of the correct size to your mainline or leader.
- Pull the lead clip down over the swivel and fix in place with the supplied peg.
- Attach your chosen lead on to the arm of the clip.
The 10 Best Carp Rigs of 2022 Reviewed
When used correctly, lead clips are one of the safest and easiest systems to use. They can be used in a variety of scenarios but are particularly effective in situations where you need to dispose of the lead. When fishing in thick grass or near obstacles, dropping the lead reduces the chance of catching a fish. You are therefore more likely to land every fish you hook.
A lead clip consists of two parts. The lower part with the arm where the leash is threaded and an end elastic that gently pushes onto the arm to hold the leash in place. How far the end rubber is pushed determines how easily the lead can be cast. Some feature an internal ridge to attach the swivel attached to the end of the main line, and others use a small peg to attach the swivel. This ensures that the lead clip stays on the swivel during casting and fishing and that the lead can be cast out if it gets caught.
A GREAT ALL-ROUNDER
Not only are they easy to throw, the lead clips are also extremely tangle-proof. If you are using tubing or hooklengths, make sure your hooklength is shorter than this to prevent it from tangling around the main line. If the lead penetrates a soft lake bottom, the leader can still settle over shallow silt or weeds because the leader is attached directly to the lead. It’s also an efficient self-hooking rig. When a carp picks up the hookbait and straightens the hooklink, the hook is pulled into its mouth and the sudden resistance causes the fish to snap and snap the hook into place.
1. Thread the end elastic onto your main line or the chosen leader material
2. Next, thread on the lead clip portion of the system
3. Attach the correct size swivel to your main line or hooklink
4. Pull the lead clip down over the swivel and fix it with the peg provided
5. Attach your chosen lead to the arm of the clip
6. Moisten with saliva and gently slide the rubber tail over the clip
TOP TIP For really weedy swim spots, remove the tail rubber and use PVA tape to hold the lead in place on the cast. Once the tape is in the water it will melt and there is no chance the lead will not be cast on the take.
2 WAYS TO ATTACH YOUR HOOK LINK TO YOUR LEASH
1. Tie a figure of eight loop to the hook at the opposite end of your leader. Thread this loop through the eye of the swivel in the base of the lead clip and then thread the hook through the loop. Finally, pull the leader to tighten the knot.
2. A quick-change swivel or clip allows you to attach a new leader in seconds. These are great if you are anticipating multiple bites or threading your hooklink through a mesh PVA bag or stick before casting.
TOP TIP Anti-Tangle Sleeves Adding an anti-tangle sleeve to your hooklink will help push it away from the lead and reduce the likelihood of tangles both during the cast and when landing on the lake bottom.
If you require any further carp fishing tips or information please contact the Angling Active team. We’re here to help.
This article was brought to you in partnership with Improve Your Coarse Fishing Magazine.
How do you tie a hair rig to the main line?
- Tie an overhand loop with the bait floss.
- Thread corn on the the floss using a baiting needle and secure with a Hair stop.
- Thread on 5mm of silicone tubing.
- Thread silicone on to the hook.
- Tie Knotless Knot.
- Trim bait floss and blob with a lighter.
- Cut 8 inches of main line of your choice.
The 10 Best Carp Rigs of 2022 Reviewed
2. Tie an overhand loop with the bait silk.
3. Thread corn kernels onto the floss with a bait needle and secure with a bobby pin.
4. Thread on the 5 mm silicone hose.
5. Thread the silicone onto the hook.
6. Tie a knotless knot.
7. Cut the bait yarn and dab with a lighter.
8. Cut 8 inches of main line of your choice. Connect the main line to the hook with a knotless knot. Make enough twists to cover the floss.
9. So. Tighten the knot with a pulla tool.
10. Attach an anti-tangle sleeve.
11. Tie a loop at the other end.
12. The finished plant.
How to set up an inline lead.
See some more details on the topic inline lead carp rigs here:
What Carp Fishing Lead Setup Should I Use?
Which line laid where?
There are multiple lead setups these days and sometimes choosing the right one for the situation can mean the difference between blanking or possibly having the journey of a lifetime. There are a few different ways to fish across different substrates on the lake bottom that you may encounter.
The lead clip
The lead clip is designed for fishing over firmer lake bottoms, whether it’s gravel, clay or firmer silt, it’s one of the simplest fishing methods and only requires 3 parts, the lead clip, tail rubber and a swivel that sits in the lead clip. Because the leash can be attached or detached from the clip, you can switch between sizes of leash if needed. You just need to take one off and replace it with a bigger/smaller one. It’s probably one of the most popular lead arrangements in modern day carp fishing because it’s so versatile you can adjust it to be semi fixed or drop the lead on the take, it all depends on how far you slide the tail rubber above the clip. It’s always worth wetting the clip before moving the rubber tail so the fish can get rid of the lead if it breaks. The only situation you should avoid using it in grass/soft muddy conditions is the lead will be pulled into the grass and even if your hookbait is sitting on it the hook link will be dished which will hinder your rig presentation.
Setting it up with a quick change swivel instead of a regular swivel allows you to switch between rigs quickly and efficiently and also gives you the option to thread in mesh PVA bags to protect the hook tip.
It is recommended to use a hook link with some kind of coating to help the rig’s anti-tangle properties and to ensure the rig is separated from the line when cast to avoid tangling.
inline leads
In-line leads are a fantastic method as the carp will encounter the heaviest part of the lead first when picking up the rig. This is fantastic but using in-lines in the right situations is definitely important due to the hook connection and swivel coming out the bottom of the lead needs to be fished over a hard bottom to ensure the lead doesn’t clog and your hook link off the bottom of the lake is thrown. You can get around this by placing your inline setup in a solid PVA bag. Not only does this allow you to fish over dirtier bottoms, but it also presents a nice little packet of bait where Hook & Hook bait is attached to prevent it from snagging on debris that may be present on the lake bottom.
Another type of inline fishing is the drop off method. If you like using big leads, this might be for you. The last thing you want is a big lead swinging around on the line with a relatively short leader, it will never end well. The concept of the drop off is fairly simple but is best used with a ring swivel rather than a standard swivel. First slip a tail elastic or piece of silicone over your line, then tie on your ring swivel, attach the hook link to the largest ring as usual, then attach your main line or hooklink to the small ring behind the large ring. Slide the other end of the swivel (without attaching anything to it) into the lead, loop your line around the outside of the lead and slide your tail rubber/silicone down and slide over the lead’s shaft, you must don’t ram it up because you want the fish to cast the lead on the take. If the fish picks up your rig and shakes its head it will release the swivel from the lead and when you pick up the rod the lead should fall off the tail rubber. It’s a fantastic method that works time and time again.
Helicopter Rigs
Helicopter rigs are probably the most versatile presentation you will find, whether you’re fishing over firm or weedy bottoms, they can be perfectly tailored to suit the substrate. There are a few different ways you can fish them, one of which is the traditional way of just having a helicopter case and a top bead. Between the two is a ring swivel for your hook link to attach to. Position the top bead at the depth you think the detritus might be and ensure a perfect presentation every time. You can use heli rigs on both leadcore and naked the main line but an important point is fish safety, this top bead needs to be able to detach in the event of a break so making sure it detaches easily is a must .
Now we have the chod setup, again still presented on a helicopter rig but fished a little differently, this rig was designed for fishing over choddy and weedy bottoms, although you can still get bites with it on shingle spots, there definitely is better options for fishing over clean lake beds. The only difference between this and a traditional helicopter is that an additional bead is installed. This is placed over the helicopter sleeve so the swivel sits between two beads. These can be relocated accordingly to suit whatever debris you may be fishing in. In addition you can also space them a good distance apart for running chods, allowing the rig to slide up your hooklink/line and match height perfectly of the grass. It is recommended to use a small lead when fishing chod due to the extremely short hook link. The last thing you want is a big swinging lead potentially causing the hook to fall out. Another alternative would be to use a heli safe instead of a sheath, this will ensure the lead falls as you play the fish.
Running rigs
Often overlooked in modern day carp fishing, running rigs can be a deadly tactic in the right situation. Incredibly easy to set up, they only require 3 components, a lead, swivel and buffer bead. The inclusion of an anti-tangle sleeve is optional, setup couldn’t be simpler, first slide your lead onto your main line followed by your buffer bead then attach your line to your swivel. They can be very effective when fishing for carp that are under pressure because when they pick up the rig there is no resistance for the carp to try and get rid of the rig using the lead as it slides down the line so when If you feel like you’re getting ready or trying something different than most, then a running rig is definitely worth trying.
Running rigs work best over a cleaner lake bed to prevent the lead from getting stuck in the weeds, potentially preventing the object from running free.
shocker rig
Now you won’t see the shocker rig in a lot of people’s armory, but it can definitely be effective on the day, and if you can get a pickup, they can be wild takes! The idea is that the carp doesn’t feel any initial resistance when picking up the hookbait, but as soon as they move away they get nailed! The way to set them up is like a standard in-line setup, but you don’t want the swivel to be pulled into the lead insert, so you can either use a smaller swivel for a loose fit, or a bead on top lay the swivel to ensure the line cannot pull over it. This creates a running inline setup. Once you have decided how long you want your hook link to be, you can insert another bead over the lead slightly longer than your hook link to avoid tangling. This must be semi-fixed and able to slide off in the event of demolition. What this does is a moment of no resistance as the carp picks up your hookbait, but as soon as it moves away it will hit the full weight of the lead and by that time it should have your rig in its mouth far enough to get one great hook hold, it definitely catches them off guard and can often trip up the more cautious fish but be warned although the takes can be mental! It is recommended to fish this rig over firmer lake beds.
When to Use an Inline Lead Setup
Carp Squad is supported by readers. If you make a purchase through links on our site, we may earn an affiliate commission. Thank you for supporting us!
There are many different lead setups on the market, each serving its own purpose in specific carp fishing scenarios. One of the most common is an inline lead setup, also known as an inline lead rig.
Using an inline lead in the right situation can change the game and improve your hook holds and overall catch rate. Use it in the wrong situation e.g. B. when fishing in deep mud, and it can work against you.
Let’s find out more about what it is and when you should use an inline lead.
What is an inline lead setup?
An inline lead setup is a specially designed carp lead that your line is fed through. Instead of a swivel, you have a hollow center that sits just above your hooklink.
Essentially it is an alternative to a traditional lead that you would mount over a lead clip or helicopter setup.
Inline leads are great, but only when used in the right situations.
What are the benefits of using inline leads?
Improved hook handles
Due to the way inline leads are mounted, the leader quickly comes into direct contact with the lead. This is great for hooking carp as the pressure of the lead helps bury the hook.
Because of this, in-line leads are often used in stalking situations where carp may timidly feed on the edge.
Neatly cleaned up
Once set up, an in-line weight system provides a clean and tidy setup, free from other moving or bulky parts like a weight clip. In-line leads are therefore the number one lead clip arrangement for use in solid PVA bags where space is limited.
Also, when using PVA bags, the carp will mostly eat around the lead assembly, so you want it as little as possible.
Aerodynamic
While not synonymous with distance casting, in-line leads tend to fly properly through the air since the weight is directly related to the line.
When to Use an Inline Lead Rig?
There are a few situations where an inline lead rig can really benefit your fishing. Here are just a few:
Solid PVA fishing bag
As we briefly touched on, in-line leads are predominantly used when fishing with solid PVA bags. They are compact, tidy and offer excellent hooking skills. – A must when carp feed on smaller solid pouch parts. Solid PVA bags are particularly useful when carp fishing in heavy weed as the entire setup can be dived right through the weed and presented on the lake bottom.
stalking
We already know that inline leads offer excellent hooking skills. Because of this, they are often an important choice for stalking or edge fishing. When you can see that your lure is positioned correctly and not clogged in the lake bottom, why not choose a lead that offers excellent hook hold.
When it comes to edge fishing, drop off style inline lead fishing is the right choice for us.
Inline leads are clean and tidy, perfect for solid PVA bag fishing.
When not to use an inline carp lead?
As good as they are, there are times when you should opt for a different lead arrangement over an inline lead. Here are just a few examples:
Deep silt fishing
Of all the lake beds, silt is perhaps the most difficult to fish. Any lead assembly tends to get stuck in the silt, but it happens more with inline leads.
Since the lead is connected directly to the hooklink it is very easy for the lead to pull your hooklink and hookbait into the silt. From a fishing perspective this is disastrous as you are burying your hookbait out of sight of passing carp.
An important part of carp fishing is making sure your hookbait is accessible. If you want to do that in the mud, stay away from inline leads! (Unless you use them in solid PVA bags).
If you are not sure what the bottom of the lake is
Let’s say you show up at a lake and have no idea of the bottom of the lake. In this case, an inline lead is a gamble as you could be fishing on a soft lake bottom. Inline leads tend to dig into the bottom and pull your hooklink down with them.
For scenarios where you’re throwing into the unknown, we recommend going with a chod rig every time.
Are Inline Leads Safe?
Most carp tackle is safe in the right hands and that includes in-line leads. In-line leads are safe as long as the lead can detach from the end of the leader/line in the event of a snatch or line break. (This applies to all line arrangements).
The last thing you want is a carp trailing a 3-4oz inline lead.
How to make your inline lead safer
The problem with traditional inline leads is that the center tube is very thin and made of a tough plastic material. When paired with a lead core or a fluorocarbon leader, it leaves little room to fall off in the event of a break.
For this reason we recommend removing the inner tube and replacing it with a tail elastic. These are much more supple and tend to sit more easily on your hooklink swivel.
Alternatively you can opt to fish a drop off inline lead. The lead core must be guided past the lead on the outside so that it can easily detach from the swivel and tail rubber in the event of a take.
READ MORE: What’s the leader in carp fishing?
How to set up an inline lead
The 10 Best Carp Rigs of 2022 Reviewed
Tying your own carp rods is a satisfying way to catch carp.
But not everyone is able to tie them effectively, e.g. B. those who suffer from poor eyesight or have trouble holding small items such as hooks and other rig components. Ten years ago we would have recommended tying your own rigs, but today the ready-tied rigs available are as good or better than many anglers can tie themselves.
There’s no stigma to using ready-tied rigs. Fishing is a hobby and should be fun. Use whatever products work for you and allow you to enjoy your time on the bank.
Companies like Korda, Nash Tackle, Fox and Gardner are leaders with their ready tied carp rigs.
We have listed 10 of the best for you.
THE BEST FOR ANGLERS WHO FISH ZIG RIGS OR WANT TO TRY IT!
Korda Ready Tied Zig Rigs are ideal for anglers who like zig rig fishing or want to try it out without spending a lot of money on all the separate rig components.
This range of ready tied zigs allows you to use rigs that are as good as those used by the UK’s top anglers. They’ve been tied to exacting standards with proven Korda terminal tackle. The Mixa hook pattern was chosen in a size 10 because it offers a tremendous gap and subcutaneous sharpness, and they are tied to a custom 8-pound zig-hook mono that has been tinted for camouflage.
Each spool comes complete with three ready-tied zigs that can be cut to your desired depth! When your session is over, you can simply wind the zigs back onto the reels for storage. If you want to try zig rig fishing or save yourself the hassle of tying your own line these are for you!
Don’t forget a zig rig storage box to keep them in!
BENEFITS Reusable – Simply unwind the rig from the spool and when you’re done, wind it back up ready for your next session!
Versatile Hook Options – Not only are there different working capacities and line diameters, but also different hook sizes and of course barbed and barbed options!
Hookbait included! – Each spool comes with three different hookbait options in different colors! CONS Thin line can damage — Check rigs for damage before using again.
Shopping now
BEST FOR SMALL CARP
The Korda DF Ready Tied Rigs are traditional blow back rigs and are perfect for a variety of fishing situations. Ideal for bottom baiting or wafters, the DF Ready Tied Rigs are great for those who are new to the sport or don’t fish as often.
Where does the DF in the name come from? Danny Fairbrass!
Let’s be honest; the head of korda catches more than its fair share of fish of all sizes – domestically and internationally. Now you can get one step closer by using the DF ready tied rig range available from all Korda stockists.
These rigs have been bound to the exacting standards that Danny is built to of tried and tested components. The hair length, loop size and amount of coating pulled back are exactly as DF themselves would use them, giving you a big step towards carp success!
So what exactly is the DF rig? Well, it’s the rig that Danny has refined, tweaked and replaced with new components over the past decade as better technology became available. It’s a versatile rig that can be used for direct boilie fishing or with plastic corn over the tip of spodd particles. It’s a great hooker perfect for use with critically balanced presentations, standard bottombaits or pop-ups (with the addition of a split shot, sinker or dark matter putty of course).
It features an all-time classic hook, the impressive Korda Wide Gape, with its secure beak and robust forging, coupled with the best coated braid, N-Trap Soft. Of course, the heat shrink tubing is our finest Safe Zone material, and the rig rings are Korda through and through. Buy a few of these rigs and it will be like having Danny with you on the bank tying your rigs for you!
There can’t be a higher recommendation, right?
PROS Designed by the best – These rigs come straight out of the boss’s tackle box at Korda!
Options — Breaking Load, Hook Size and Hook Type are considered. CONS Specific Application – Not ideal for pop up baits.
Shopping now
BEST WHEN TOUGH, SUPER STRONG RONNIE RIGS ARE REQUIRED!
Designed for a Ronnie rig, the Trig-Hammer Ronnie Hook is one of the premier hooks of choice for thousands of anglers worldwide. New improved Ronnie’s including the super effective Trig-Hammers. This incredibly sharp long shank pattern has established itself as “the” hook of choice for thousands of anglers when using the Ronnie rig.
The subtle curved shaft creates an aggressive angle and together with the needle-sharp point results in excellent hook hold and an impressive hook-to-landing ratio.
These rigs also include a metal bait screw, making pop-up attachment quick, easy and secure. The Grip Stop is in the optimal position on the bend, which means that it does not slip even with extreme casting distances. The hook is attached to a Ronnie Ring Swivel which is encased in 1.6mm heat shrink tubing.
Available in sizes 4, 5 and 6 barbed and barbless, three rigs per pack.
BENEFITS Variety – Good range of hook sizes and barbed and barbed options.
Super Strong – Made from the very best rig components.
Well Done – On closer inspection it is clear that these rigs are made to a very high standard. CONS Bait Screw Only — The method of attaching your hookbait will not please all anglers.
Shopping now
BEST FOR EVERYONE WHO WANT TO MAKE THEIR OWN RIGS BUT NOT SURE WHAT COMPONENTS YOU NEED.
The Gardner Ronnie Rig Kit is a great idea! It allows anglers who prefer to build their own rigs to do so without worrying about choosing the right components.
Everything you need to build a Ronnie Rig is included, and there’s even 1 x finished rig for you to check out to make sure you’re doing it right!
At the forefront of angling innovation, Gardner Tackle has done it again with the Ronnie Rig Kits.
ADVANTAGES Satisfaction – You can build your own rigs and be satisfied with your efforts, especially when you catch your first carp with it!
Flexibility – If you build your own rig, you can change the length of the rig compared to pre-tied rigs. CONS Quality – Until you get it right you may end up wasting some of the components.
Shopping now
BEST FOR POP UP FISHING
This Nash chod rig is perfect for those struggling to tie a chod rig. Let’s be honest – it’s not easy! But no fear. Nash Tackle have developed their own that will get you fishing in no time.
Chod rigs have fallen by the wayside thanks to the Ronnie Rig, but a properly tied chod rig can be just as effective. Trouble is, if you get it wrong, it could very well work against you.
Nash Chod Rigs are made from the finest materials including Nash Pinpoint Chod Twister hooks. All components are the same used by the guys at Nash Tackle.
PROS Excellent Components – Rest assured that these rigs are as good as any you can tie yourself.
Super Sharp — The Nash Pinpoint Chod Twister hooks are razor sharp!
Very Well Made – These rigs are so well made we couldn’t tell the difference! DISADVANTAGES Needs Correct Setup — The chod rig needs to be installed correctly on your hooklink to work effectively.
Shopping now
THE BEST FOR BEGINNERS
Korda’s Basix Hair Rigs are the best choice for those who are new to the sport or even those who don’t want to tie their own rigs. As the name suggests, these rigs are no frills while still remaining as effective as any other rig, just for less money!
The BASIX Ready Tied Hair Rigs are ready to use right out of the pack, all you need to do is add either a bottom bait or a wafter and you’re good to go!
These rigs are tied using the camo green BASIX Coated Hooklink material, with a small section pulled back through the BASIX Wide Gape hook to allow for movement and increase hook potential.
They have a supple hair with a piece of silicone to secure it to the shaft to avoid tangling and the length of this hair has been optimized for hook bait sizes to match the hook size you have selected.
ADVANTAGES Big Price – Affordable without sacrificing quality.
Beginner – Ideal for beginners or those who don’t fish much.
Quality – they may be called ‘Basix’ but they’ll catch you a bucket load of carp! CONS Options – They come in one length so they may not suit all scenarios you might encounter on the bank.
Shopping now
THE BEST FOR THOSE STRIVING TO TYING STIFF HOOK LINKS
The Carp Spirit brand offers these exceptionally well tied stiff rigs for people looking to buy rigs on a budget! This neat little piece of kit is a rig favored by many big fish anglers and made famous by Terry Hearn in his first book, In Pursuit of the Largest.
The Hinged Stiff Rig can be notoriously difficult to tie, but the clever folks at Carp Spirit have taken care of that! These ready to use rigs are made from the finest materials available and are intended for use with super buoyant pop up hookbaits only.
Make sure you do your research and planning before using it and make sure you set it up properly and SAFELY.
PROS Prize – This is a great prize.
Stiff Hinge – Stiff design eliminates tangles and provides great hookbait presentation.
Super sharp – Guaranteed to catch every time! CONS Experience – This item is suitable for experienced anglers who understand their mechanics and how the rig works.
Shopping now
THE BEST FOR POP UP AND WAFFLE FISHING
The Korda Multi Ready Tied Rig is perfect for anglers who want to quickly change hooks when needed. The Multi Rig became famous thanks to Jonny Mac, who wrote a lot about its effectiveness. Remarkably easy to use, the Multi Rig is still a firm favorite with TFT employees.
The Multi Rig is a super versatile rig where the hook can be changed on the fly. They are most commonly used as pop up rigs but can also be used with bottom baits!
Our versions, which have been pre-tied to save you time, are made from Kamo coated braid. The effective banded camo pattern helps it blend in on all types of sea beds.
Danny has been using this setup for a number of years now. The rigs we have produced for you are exact replicas of his version of this presentation.
We’ve mated these rigs with the superb Krank Choddy pattern, which features a wide gape and curved shank for optimal hooking and landing.
PROS Fast Hook Change – With the Multi-Rig you can change hooks in no time.
Versatile – You can use these as pop up rigs or bottom baits. CONS Lack of Specialization — This option lacks the specialization that other rigs discussed here offer.
Difficult to Use – Tying up hookbaits can be tricky.
Shopping now
THE BEST FOR A RANGE OF CIRCUMSTANCES
Another versatile product, Carp Spirit blow back rigs are perfect for pop ups and bottom baits!
The Carp Spirit Blow Back Rig consists of a Camo Core leader and a Razor Point LS (Long Shank) hook. The long shank pattern is perfect for allowing the micro ring to slide along when the fish tries to cast the bait leaving the tip of the hook free and increasing the chances of finding a hold. A Carp Spirit Kicker line aligner is also added to the rig to help turn the hook tip quickly.
This versatile rig is perfect for use with bottom baits and pop ups. Expertly hand tied using Carp Spirit components, it uses a size 8 quick change swivel with a mini anti-tangle sheath for added cleanliness.
PROS Diversification — With this rig you have the best option for tackling both pop ups and bottom baits.
Well done – Carp Spirit rigs are really well done! CONS rigs are one length and only come with a standard hookbait hair attachment.
Shopping now
BEST FOR HEAVYWEIGHTS
This handy pop up rig is one of the most underrated products reviewed here as it is a uniquely focused rig with a specific style. It’s a fantastic product with two hook sizes, 4 and 6, and has been the product of choice for many famous anglers including Kev Hewitt.
PB Products has been enjoying a bit of a resurgence of late and their range of ready tied rigs is mega popular. Constructed from the finest materials and components and paired with a sticky, sharp hook, these Ronnie Rigs are available with either a stiff or soft boom, giving the angler greater flexibility of approach.
PROS Battle Hardened – Used by some of the UK’s top day charter anglers responsible for catching LOTS of carp.
Reliable – We tested these to the breaking point and they were VERY durable. CONS Limited Sizing Options – Like a handful of other products, this item is only available in two hook sizes, 4 and 6.
Shopping now
Conclusion
Although there are a number of carp rigs to choose from, we hope this list has highlighted some of the options available for those who like to use ready tied rigs.
This list is just one of many resources we offer to help carp anglers. Whether you’re a beginner ready to take your first steps into this hobby or a seasoned champion, you’ll find everything you need at Total Fishing Tackle. We’d love to hear how we helped you figure out which of the rigs best suits your specific needs and style!
Shop rigs, rods, bivvies, clothing and more at
Entire fishing tackle
!
Related searches to inline lead carp rigs
Information related to the topic inline lead carp rigs
Here are the search results of the thread inline lead carp rigs from Bing. You can read more if you want.
You have just come across an article on the topic inline lead carp rigs. If you found this article useful, please share it. Thank you very much.
