Large Ceiling Rose Light Fitting? The 139 Latest Answer

To decide which ceiling canopy size is right for your space, you must consider the following information when unrelated to the original ceiling canopy.

We sell ceiling canopies between 300mm and 1460mm. Larger rooms with high ceilings would require the larger rosettes. Small or narrow spaces such as dressing rooms, hallways and rooms with very low ceilings would require the smaller rosettes.

Now how do you decide which ceiling rose is the right size for these medium sized rooms.

The best way to determine which ceiling rose is the right size for you is to measure the size of your room in terms of ceiling height x length x width. For the sake of simplicity, let’s say an average room in an old building is 2.8 meters high x 4.5 meters wide x 4.5 meters long = 56.7 m3.

A room of these dimensions would fit a ceiling canopy of approximately 580mm to 720mm.

How can I try on a ceiling canopy before buying it?

The best way to test how these sizes of ceiling canopies may look on site is as follows:

Cut out a circle of colored paper or cardboard with the approximate dimensions

Glue it to your ceiling at the location of the ceiling rosette

Then stand in the corner of the room and look at your fake ceiling rose and judge the result.

Remember that the real ceiling rose is 2 or 3 cm deep, making it more effective in the room than your paper version. However, this is a good way to determine whether or not the size of your ceiling rose is in proportion to your space and the light. Also remember that once you hang a light from your ceiling canopy, the effect of it will be reduced as the light is the focal point of the ceiling and not the ceiling canopy. If you are using the rosette with a huge or very showy chandelier, you will need to increase the size of your ceiling rosette so that it is not overpowered by the fixture.

Any room smaller than our 56.7m3 would require a ceiling canopy with a diameter of around 300mm to 620mm and any room larger than 56.7m3 would require a ceiling canopy with a diameter of around 700 mm to 920 mm require.

The above are just rough general rules. A very decorative ceiling rose will have more impact than a very plain one, so your own judgment with your paper ceiling rose is certainly the best way to come to your own conclusion.

mollythewitch 11/18/2012 7:18 am

It really is. Victorian house so the rose and bay are lovely. The ceiling is currently painted a deep apricot, which is foul; but forms a contrast to the plaster. I’m worried that if I paint it white everything will look a bit the same… very high ceiling so it’s going to be a real pain in the ass and I don’t want to do it twice if it doesn’t look right. What do you have?

First you need to open the ceiling rosette by turning it around the perimeter. It is divided into ceiling rose cap and ceiling rose base. The cap part has a hole in the center to route the output wires.

On the base part you will see two clamps, one for the phase wire and one for the neutral wire. Each clamp has screws on both sides forming four connection points. Of these, two distant connection points are on the horizontal plane, while the remaining two are on the vertical plane.

The vertical connection points are used to connect input wires while horizontal connection points are used for output wires.

Now disconnect the two input wires and connect the vertical connection points of the two connectors. Similarly, strip both output wires and connect them across each horizontal connection point of both terminals.

Finally, attach both parts of the ceiling rosette to complete the installation process.

An Introduction to Ceiling Medallions

home decor 0

Whether building or remodeling, homeowners want their personal style to be reflected in every detail of their home. One of the most overlooked areas in interior design is the ceiling. The first step to adding a simple, inexpensive touch to any room is to install a ceiling medallion. Find out what these ceiling ornaments are all about and how to apply them.

What are ceiling medallions?

Ceiling medallions draw attention to the area on your ceiling where you hang fans or lights. These flat medallions give your room a finished look and allow you to reflect your personal decorating style on your ceiling.

How to choose a ceiling medallion

location

Ceiling medallions range from 4 inches wide to 4 feet wide and can be installed in any room in your home with a fixture that you want to highlight. If you are building a new home, your medallion will be placed above your ceiling fans or hanging lights. During a home remodel, you will find it easier to keep your lights in place. Moving a fixture is a bit more labor intensive and you will need a professional to move the junction box.

size

Choosing the right size of locket is important. You don’t want one that’s too small and goes unnoticed. You also don’t want a locket that’s too big to become an eyesore.

Most people place their ceiling medallions to emphasize a light or fan that is a focal point in a room. Because medallions are generally placed well above the fixture, they appear slightly smaller than they actually are. Choosing an appropriately sized locket is a matter of measuring the space, not the intended attachment.

Calculating the correct medallion size for your space is easy using the steps in the example below:

Measure your space and find the square footage by multiplying the length by the width (eg: 12ft x 12ft = 144 square feet). Divide the square footage by seven (144 / 7 = 21). The locket size for a room with these dimensions would be 21 inches or less.

For easier reference, keep these general guidelines in mind:

A room measuring 140 square feet or less would require a medallion 20 inches wide or less.

A room measuring 140 to 210 square feet would require a medallion that is 20 to 30 inches wide.

A room measuring 210 to 280 square feet would require a medallion that is 30 to 40 inches wide.

Any room larger than 280 square feet would require a medallion that is 40 inches wide.

While these numbers are guidelines, you can choose a smaller locket if you prefer. Some designers choose larger medallions to emphasize the ceiling in the room’s design, while others choose smaller medallions to add just a touch of stylish flair. If you’re not sure what size you want, you can measure out the sizes you want on butcher paper and apply them to the ceiling to get a better idea of ​​how each size will look on the ceiling.

draft

Ceiling medallion designs range from simple to elaborate. Common styles include Chelsea, Rochelle, Jefferson, Renaissance, and Egg and Dart.

You don’t have to stick to these more traditional choices when choosing your locket. Many ceiling medallion manufacturers offer dozens of styles featuring historical patterns, curves, and floral patterns in a variety of shapes. For the finishing touch, choose a ceiling medallion that matches the molding or crown molding in your room.

Finished

Most lockets are plain white lockets that can be easily painted to match your room’s decor. Faux wood or metal finishes, or pieces in the room’s accent color add a stylish touch that ties it all together.

Brushed metal, copper and stainless steel finishes blend seamlessly with modern lines and elegant designs. Wood finishes add warmth and are exceptional when paired with matching moldings and trim. Chalk paint or distressed finishes add a touch of timelessness. For a more authentic piece, choose lockets with mirrors or glass embedded in the surface.

material

The choice of material mainly depends on the installation. Most finished lockets are made from lightweight plastic, but some metal and hand-carved wood lockets are available. When choosing the material, consider how much time you will need to install your locket. Heavier medallions will take more time to stick to the ceiling and you will need to use more screws or hold them in place.

How to install a locket

While many homeowners would consider this task a simple project, you should never do anything that you feel uncomfortable or unsafe about. Do not climb high ladders or perform electrical work without another person present. If you’re ready to take on this challenge, you’ll need the following tools before you begin:

Drill

sink bit

circuit tester

screws

Adhesive and paintable latex seals

wood filler

You must paint or varnish the locket before installation.

Don’t be intimidated by the installation process. Follow these simple steps below:

Turn off power at the fuse box before removing the light or ceiling fan. Remove the bracket and the protective plate over the wiring. Loosen the wire nuts and check the wires with a circuit tester to ensure all power is off. Drill holes in the locket with the countersink. Thread the chain and wires through the center hole of the locket; Make sure nothing gets between the medallion and the blanket. Make sure the decorative side of the locket is facing down. Apply adhesive to the back of the medallion and attach to the ceiling. Reattach cables and secure with nuts. Screw in the locket without overtightening the screws. Seal gaps around the ceiling with paintable caulk. Patch screw holes with wood spatula and touch up paint as needed.

When your ceiling medallion is complete and installed, you will be amazed at what this decorative element will add to your space.

For a simple, inexpensive way to add a stylish pop or design point to any room, a ceiling medallion is an attractive option. Now that you know how to choose the right locket and apply it yourself, what’s stopping you from embarking on this adventure to liven up an overlooked area of ​​your home?

Questions about ceiling medallions? Share them in the comment section below!

Think of the largest room in your home, whether it’s your living room, master bedroom, or finished basement. You’re probably engaged in all sorts of activities there – watching TV, listening to music, reading books, playing games with your family, drinking coffee with friends – and you might find yourself adjusting the lighting in the room depending on your task. Maybe that’s partly because you can’t get enough direct focus to see your book’s text clearly, or it’s too bright for a relaxing movie.

With the right layers of light in your large space, you can quickly adjust your lighting—whether it’s your traditional recessed lights in your ceiling or decorative accent lights—to work best for whatever you’re doing. And you can make it even easier to enjoy that nifty craft project, super-focused reading, or superior listening experience with the following ideas for lighting up your big space!

Why do you need a large room lighting?

Elevate your environment. Imagine setting up the dream scenario of a large room, be it a huge comfy couch or a big screen TV, but the room still feels cold and uninviting. The right lighting for large spaces can enhance the entire space and help you achieve the atmosphere you want.

. Imagine setting up the dream scenario of a large room, be it a huge comfy couch or a big screen TV, but the room still feels cold and uninviting. The right lighting for large spaces can enhance the entire space and help you achieve the atmosphere you want. Set the mood. Likewise, the right lights can add the finishing touches you need for the perfect setting. Consider a Sky Lite Galaxy projector for an unparalleled relaxation experience, or dim the lightbulbs to watch your favorite movie.

Likewise, the right lights can add the finishing touches you need for the perfect setting. Consider a Sky Lite Galaxy projector for an unparalleled relaxation experience, or dim the lightbulbs to watch your favorite movie. Add personality. You’re not a boring person, so why would you spend time in a boring room? Transform your large space from boring to beautiful with a layered approach to lighting for large spaces. Unusual, attention-grabbing lights can showcase your personality traits more than just plain old ceiling lights on their own.

You’re not a boring person, so why would you spend time in a boring room? Transform your large space from boring to beautiful with a layered approach to lighting for large spaces. Unusual, attention-grabbing lights can showcase your personality traits more than just plain old ceiling lights on their own. Light up the entire room. A single lamp in the corner just isn’t going to reach every corner of your large space. With a smart approach to lighting your large space, you can flood every part of your space with abundant bright light at the push of a button.

A single lamp in the corner just isn’t going to reach every corner of your large space. With a smart approach to lighting your large space, you can flood every part of your space with abundant bright light at the push of a button. Adjust to your needs. Proper lighting is key to properly illuminating all the tasks you and your family do in a large space. A large lamp isn’t effective when you’re trying to read a book, and a task lamp isn’t enough when you need to light up the entire room. Fill your large space with the right mix of furnishings to avoid these hassles and keep your activities on point.

Eight great room lighting ideas

Decorate your space for reading or crafting, make it bright, dim it for relaxing, or do just about anything you want with these eight ideas for brightening up your large space:

1. Colorful LEDs or lasers

When it comes to lighting ideas for large spaces, your options go beyond the everyday white, cream, or yellow color you might expect. Goodbye to predictable blah colors; hello, a rainbow of possibilities!

To get the exact color you want for your large space, you have two main options: LED and laser variants. LEDs can glow virtually any color of the rainbow, but lasers are brighter, more focused, and more adorable. Our Laser Ark Ambient Aurora Light offers a tranquil, almost mesmerizing rendition of a green aurora softly bouncing in a blue mist that spans your entire room.

ARK Aurora Light $69.99 $49.99 Defy reality with a moving abstract aurora. Shop now arrow_forward

2. Sculptural fixtures

In a large room, you might be tempted to put art on your walls. What if you could do that and install lights in one fell swoop? This is where sculptural lights come into play. If your light fixture is unusually shaped and looks like it belongs in a modern art museum, the light fixture can be just as decorative as the light emanating from its bulbs. You’ll usually find that sculptural lights can be hung on the wall or installed overhead, but they’re also known as table lamps or task lights.

3. Accent lighting

Draw attention exactly where you want it! If you have sculptures, paintings, statues, or any other object that you want to be the focal point of your large space, you need to make sure they all stand out. Accent lights allow you to do just that. Install these lights on the sides of a work of art in your large room for an aesthetic touch that blends perfectly with your interior design.

4. Transparent lighting

Transparent lighting is all about reflection – and refraction. Transparent lighting is truly unique and different from other types of chandeliers, lamps and other fixtures. Surrounded by transparent sheets of glass, plastic or a similar material, these objects enhance the sun’s rays and the colors emanating from the lamp’s bulbs. The result is pretty as a picture – or more like a pattern that adorns the walls and ceiling of your large room.

5. Low hanging fixtures

There’s nothing quite like a room with gorgeous high ceilings, but if your great room is long and not tall, low-hanging lights can still give the illusion of sufficient height. This particular category of pendant lights extends from your ceiling to within a few feet of a central piece of furniture, such as a sofa. B. a coffee table. Your long room will appear taller and you will get accent and ambient lighting for your large space.

6. Floor lamps

You don’t always have to climb to your ceiling to give your large space some much-needed ambient light foundation. Start on the ground floor with floor lamps. These simple lights are at most a tad taller than you, and you only need to screw in standard bulbs (or maybe one of our color laser BlissBulbs) to bring your large space to life. Try them out in a few different parts of your space – beautiful lighting design foundations are rarely that easy!

7. Task Lights

A large room means many uses. Maybe you have a reading nook, a seating area, a couch for watching TV, and a small table for arts and crafts. Give these areas their own work lights so whoever sits there can do exactly what they came to do: soft for reading, dim for the TV, bright for crafting – the possibilities are endless!

8. Decorative lighting

With just a push of a button, you can transform your room from an everyday space into an environment where the lights are the decoration! BlissLights projectors and portable USB-powered devices are particularly well suited to this task: our StarPort Laser USB, for example, illuminates our room with a soft starry sky. Similarly, our Christmas tree topper fills a massive space with festive cheer, and our Sky Lite laser galaxy projector casts blue and green skies everywhere. With lasers, you can simultaneously decorate and illuminate your massive space—and set just the right mood—with minimal effort.

Sky Lite Galaxy Projector $59.99 $49.99 Light up a galaxy of moving stars and a blue nebula cloud. Shop now arrow_forward

Choose BlissLights for simple ideas to illuminate your large space

At BlissLights, our red, green, and blue lasers in starry sky, nebula, and aurora patterns adorn your large space, setting the mood and elevating your surroundings beyond what you previously thought possible. No space is too big for our laser bulbs, projectors and portable lights, especially if you use some as accent lights and others as ambient or task lights. Browse our shop to start building your multi-layered, versatile and beautiful lighting for large spaces today!

One of the most critical aspects of an interior design project is the lighting. However, with so many lighting options available, it can be difficult to choose one that suits your home. If you are considering choosing either recessed or recessed lighting, knowing the differences between the two can help you make a better decision.

Recessed lights usually have pots inside the ceiling and carry the lamp socket into which the light bulbs are screwed. They ensure good ambient lighting and narrow light cones. On the other hand, a flush mount light is wider and distributes more light rays in a room. They have canopies instead of pots.

This article will tell you what downlights and downlights are, their types and designs, and their parts. You will learn about the similarities and differences between these two types of lighting.

Recessed lighting: a basic overview

Recessed lights, also known as downlights, box lights or pot lights, are a type of lighting that illuminates a room with lights whose edge is flush with the ceiling. They are particularly suitable for rooms with low ceilings and those that require good ambient lighting, including basements, art galleries, walkways and corridors.

They also save energy as they use LED fluorescent bulbs to provide light. If you’re looking for lighting that doesn’t distract attention from the other details in the room, recessed lighting is the best option.

Structurally, recessed lights have rod hangers that attach them to ceiling joists to hold them in place. Some also come with their junction boxes and contain connectors for circuit wires.

Parts of a canned lighting fixture

metal body. The inverted part where the lightbulbs disappear. The metal housing is usually made of thin metal and houses more than just the bulb. Other components are the reflector, the temperature sensor and the socket into which the bulb is screwed. The metal body determines the size of the downlights as they are available in diameters from 3″ to 9″ (7.6cm to 22.9cm).

Reflector. The shiny finish lining the inside of the inverted canister. It is usually white or silvery and serves to direct the light from the bulb into the room. You can control the direction of the beam with the help of a gimbal.

Power outlet. The Edison socket, characterized by screwing in. This socket only accepts screw-in bulbs or LED bulbs with compatible threads. However, nowadays it is common to use LED bulbs over incandescent bulbs because they generate less heat.

heat sensor. Housed in the metal case, is responsible for reducing overheating. It is a safety device that turns off the light if it detects that the temperature of the light is approaching a dangerous point. Old types of recessed lights do not have this feature.

Trim. The part of the fixture that covers the metal body and hides the ceiling in drywall. It is usually decorative and is added last during installation.

Types of recessed lights

There are also as many different types of recessed lighting as there are parts. We will discuss some of the common types of downlights based on their trim below.

Open recessed lights. Recessed lights with open trim provide brighter lighting. This better lighting is possible because they are left open, with no rim to cover the glare. They are suitable for illuminating larger areas.

Pinhole recessed lighting. The pinhole allows light to pass through a small translucent circle in the center of the light. It creates a concentrated beam of light to focus on the desired area. The surrounding parts of the rim prevent the passage of light rays.

Baffle recessed lights. These recessed types have densely packed spikes or ribs in the metal housing. The ribbed interior helps reduce glare from the bulb. A dark housing interior also reduces glare.

Slotted recessed lights. These recessed types are well concealed and have flat edges that sit flush with the ceiling. They also deliver narrow light cones as in the pinhole. However, they have an adjustable body that allows you to focus the beam through a tilt of about 35 degrees.

Adjustable recessed lighting. Adjustable recessed lighting gets its name from its ability to rotate, giving you the advantage of directing the light where you want it. It also has thin moldings and is flush with the ceiling.

Decorative. The decorative nature of recessed lights adds a touch of art and style to your lighting. The decor is usually on the edge.

Reflector. The reflector has a mirror in its housing. This feature helps improve lighting and provides bright lighting through specular reflection.

Shower. It is best suited for the bathroom and any other wet area. The cover is made of tempered glass that protects the bulb from moisture.

wall washer. This type of recessed lighting combines the properties of the adjustable shutter and the shutter. However, it has a semi-shield that focuses the light from itself and onto parts of your home that you want to light up.

Advantages of recessed lights

Ideal for low ceilings. Recessed lighting is an excellent choice for homes and parts of buildings with low ceilings. They offer the occupant more freedom of movement. Details of the house like attic, basement and closets are excellent places to use recessed lighting.

Unassuming style. The simple style of this type of lighting makes it versatile. It is applicable in both formal and informal situations. If you’re looking to add a little style and design, a few options give you just that.

Targeted lighting. Recessed lights are best known for their directional lighting. Because of this, they are often used to draw attention to specific details. They are also the preferred lighting options in art galleries and around monuments and art in general.

Easy maintenance. The rim or cover that protects the bulbs from dust and moisture. With the exception of the Open and Wellwasher recessed lights, all other types of recessed lights are protected and require very little maintenance. You can use them for several years without maintenance.

Disadvantages of recessed lights

Poor energy efficiency. Although LED lamps and fluorescent lamps are now widely used in downlights, they used to consume a lot of energy, especially when it comes to incandescent lamps. The heat they generate is evidence of the amount of energy they use, hence the need for thermal sensors.

risk of overheating. The possibility of your lights going out when you need them can be frustrating. What to do during the cooling off period, light a candle? One of the disadvantages of using recessed lights is that they could overheat and trigger the thermal sensors to kick into action.

Limited lighting. Recessed lights have less coverage compared to exposed lighting types. Because of this, the amount of light you get from recessed lighting cannot be the same as from exposed lighting, even with an incandescent bulb of the same wattage.

Flush Mount Lighting: A Basic Overview

The flush-mount lighting has little or no space between the fixture and the ceiling, making it suitable for low-ceiling parts of the home. It’s a good option to achieve better overall lighting in small spaces or to illuminate areas of a room where uplights are lacking. They are also ideal as task lights in larger rooms.

Flush mount lights work well in almost all parts of the house, especially when the ceiling clearance is average or small. They are suitable for spaces such as bathrooms, kitchens, bedrooms and even living rooms due to their excellent downlight and do not require the constant cleaning that other aesthetic lights require.

While it offers excellent lighting, it’s more about the lighting it provides than the beauty it brings to any space. It’s more functional than aesthetic; So if you are looking for a light that will draw attention in a room, recessed lights are not the right choice.

Types of recessed lights

Flush mounting brackets come in a variety of shapes and designs. Although they are similar, each has its specific function and is suitable for different purposes. When choosing a flush mount for the rooms in your home, it is important to consider the style, material, mounting location, shade style and use.

Fully flush mount

A fully flush luminaire is characterized by the space it leaves between itself and the ceiling – none. They are firmly attached to the ceiling and leave no room for dust or insects to collect. They are functional and suitable for small rooms with low ceilings as they do not take up space.

Semi-flush mount

The semi-flush mount fixture is similar to the full flush mount fixture in providing light for a small space. However, they require a room with a slightly higher ceiling, say about 9 feet, to be appreciated.

It leaves a small space between itself and the ceiling due to a short pole that connects the fixture to the ceiling. This feature brightens the room more and offers a bit more aesthetics than the full flush mount. It’s easy to confuse semi-flush mounted lighting with pendant lighting. However, the latter hangs further from the ceiling than the former.

Directional and headlights

Directional lights get their name from their characteristic lighting of specific areas. They are similar in construction to the semi-flush mount as they are also suitable for small rooms with a significantly higher ceiling than required for the full-flush mount. However, they mainly serve to direct the focus in a certain way.

This property makes them suitable for illuminating work areas that require focused lighting, such as B. in the kitchen and in the hallway.

Parts of a recessed light

The parts of a flush mount fixture may vary depending on the type of flush mount fixture you are considering. However, some features are found in almost all types of downlights. Here are some of them:

junction box. The junction box is the center where all the wires meet. It is sometimes made of plastic or metal and may even be absent in some lighting fixtures.

pan/canopy. The canopy is the wide part of the lamp, which is usually connected to the ceiling with screws. It’s the second largest part of the fixture in a fully flush mount fixture, but not as big in the other types. It supports all other parts of the lamp and can be a bit decorative, especially in modern designs.

foil insulation. The foil insulation is the part of the fixture that protects the canopy from the heat generated by the bulb or lamp. It also helps reflect rays of light away from the canopy and down onto the diffuser. Sometimes called a reflector, it can be either elliptical (to spread light) or parabolic (to focus light rays).

Center Nipple/All Threads. This is part of the attachment that connects the canopy to the glass or diffuser. It is usually rod-shaped, but is absent from most modern downlights.

Lightbulb/Lamp. This is the source of the illumination. In earlier times, the light bulb was usually incandescent. They produce light but more heat and do not save energy. However, the improvement in lighting and the need for more energy conservation led to the use of fluorescent lamps. His further improvement resulted in LED lamps, which are the best at conserving energy by producing light with very little heat.

lamp holder. The lamp socket secures the bulb in place. It’s the part of the fixture, any fixture, that you screw the bulb into. It receives power from the junction box, if present, or the power source to power the lightbulb.

diffuser. The diffuser covers the bulb, insulation, lamp socket and central nipple. Their main purpose is to diffuse and diffuse light rays down into space. It helps diffuse the light so it has more range. The diffuser also traps heat, and using the wrong material in its design can pose a problem.

Final. The last is the part of the bracket that holds the diffuser to the central nipple. It screws into the central nipple and sometimes wears a decorative cap. With modern recessed lights, the end piece can be missing, since the diffuser is directly connected to the canopy. It adds an impressive decorative touch to the room.

styles of recessed lighting

After choosing your type of flush mount lighting, the next step is to choose a style or design that suits your needs. There are several styles of flush mount lighting on the market, and each is better suited to specific situations.

Traditional

Conventional recessed lights are the old design lights. They add a unique and vintage vibe to the design when used in a room. They are usually made of iron, brass or bronze and with minimal and strategic use can make an excellent addition to even a modern home.

crossing

The transitional style of recessed lighting speaks of a confluence of retro and modern design. It boasts the use of both traditional and modern design elements such as iron and brass or stainless steel and nickel.

There are quite a number of these transitional designs on the market today, mostly available in shell designs and made of plastic or glass.

Contemporary

Modern designs at their best. Contemporary flush mount lighting styles use simple materials to create elegant designs that go well with the decor and style of the era and time. They require the lowest cost to purchase and are easy to use.

Styled

This flush lighting style encourages bold colors and materials to enliven the atmosphere of the space with Nit lights. One must use other designs that complement them; Otherwise there may be color and design conflicts. They can be either contemporary, transitional, or traditional, although most often they are traditional and transitional.

Advantages of flush-mounted lighting

Suitable for small spaces. Flush mount lights are best suited for small and low to medium ceiling heights as they attach to the ceiling and take up little space as one would expect from ceiling lights. In general, the smaller the room and the shorter the ceiling, the better the efficiency of flush mount lighting.

Available in different styles. Flush-mounted lights are available in different versions. Depending on the design of your home, you can choose between traditional, transitional or modern contemporary styles. There are also really stylish designs that require aesthetic know-how to select and combine with other lighting fixtures in the room.

energy efficient. Modern flush lighting uses LED bulbs, which are energy efficient and emit minimal heat. Most of the designs available on the market that used to use incandescent bulbs now use LED bulbs. Its color depends on the color of the diffuser.

Easy-care. Maintaining the flush mount is easy because it attaches directly to the ceiling and the diffuser is attached to the canopy, preventing dust and insects from collecting inside. It is easier to clean compared to other lighting styles.

brighter lights. Remember that recessed lighting is suitable for small rooms with low to medium ceiling heights. Some flush mount lighting designs use more than one bulb in a lighting unit, which allows the room to be better lit. Depending on the material used – glass or plastic – the diffuser allows a better diffusion of the light rays in the room.

Disadvantages of flush-mounted lighting

Incompatibility with larger rooms. Flush mount lights are a poor choice of lighting in large rooms with high ceilings. They act as good secondary light sources to provide ambient lighting, but are never suitable as a primary light source. Also, they cannot fulfill their task lighting function when used in a large room. If flush mounting brackets are used for ambient lighting in a large room, quite a few are needed.

Difficulty changing lamps. If the light bulbs need to be replaced, this can be a challenge as you have to detach the light to change the light bulbs. Most flush mount fixture designs require removal of the diffuser to replace the bulb or lamp. This design can present a challenge if you’re not very hands-on.

Similarities between recessed lights and flush mounted lights

Despite the obvious differences in the structure and parts of downlights and downlights, they share some similarities that cannot be overlooked.

Suitability for rooms with low ceilings

Recessed lights and flush-mounted lights are suitable for small rooms with low ceilings. They are appropriate for these room conditions because they are either fixed to the ceiling – like recessed lights, or recessed into the ceiling – like recessed lights.

Directional lighting

Recessed lighting can provide directional lighting in art galleries or in homes to draw attention to specific features. This special feature lies in the type of wallwasher recessed luminaires. Directed and selective built-in lighting serves the same purpose.

Can be used in wet rooms

The light bulbs in recessed and flush mounted luminaires are usually protected by the casing or diffuser. This design makes them suitable for use in wet areas such as bathrooms and laundry rooms. The moisture in the damp rooms does not reach the light source and does not lead to constant replacement of the light source.

use minimum distance

The space required to install downlights and downlights is minimal. This feature is one of the reasons they are best suited for small spaces with low to medium ceiling heights. The luminaires are close to the ceiling and do not encroach on the workspaces.

Both are ceiling lights

Probably the most obvious similarity between recessed and recessed lights. They are both lights that are considered ceiling lights as they have very little or no clearance from the ceiling. This design means both require minimal cleaning as they don’t harbor dirt and bugs.

Differences between recessed lights and recessed lights

We have seen the similarities that exist between downlights and downlights. Now let’s see the differences between them.

position to the ceiling

Recessed lights, as the name suggests, provide light from the ceiling. The cladding of the lamp is at ceiling level. In essence, recessed lighting looks like it is part of the ceiling.

Flush lighting, on the other hand, looks like an extension of the ceiling. Depending on the type of flush-mounted lighting, it is usually attached to the ceiling with its canopy or a short pole.

Minimalist approach

Flush mount lighting comes in different styles and while it is known for its practicality rather than aesthetics, it has some designs and types that don’t fit the minimalist idea.

The styled nature of flush mount lighting is the opposite of minimalist as it comes in a variety of colors and designs. The traditional flush mount style doesn’t come cheap either.

On the other hand, recessed lights are known to be the perfect option for minimalist ceiling lighting. The contemporary designs also conform to the minimalist idea and cost considerably less than some recessed lights.

light scattering

The diffuser in flush mount lighting fixtures is excellent for light distribution and provides great ambient light in a package. The diffusers are usually made of either glass or plastic. Because the canopy is typically wide and can support more than one bulb at a time, the light it produces is spread more widely.

With recessed lights, the light scattering is not as pronounced as with recessed lights. The light in downlights is usually focused, and sometimes the beams are narrow in downlights like the pinhole. Although recessed lights are useful for providing ambient light, flush mount lights are better at it.

uplighting

Recessed lights are better for brightening. They can be recessed into the ceiling and floor to provide light on special occasions such as concerts.

Flush-mounted lighting is not suitable for this. It can only provide upward lighting when using semi-flush mounted lights and the canopy is made of transparent material so it diffuses the light towards the ceiling.

Conclusion

Ceiling lights are one of the options you have to illuminate your space. They can act as ambient light and task light providers depending on the type chosen. Recessed lights, also called can lights, and downlights are types of ceiling lights, and they also have different designs.

If you need energy efficient, wet room suitable and easy to use ceiling lights, the recessed light is your best choice. However, if the characteristics you are looking for are a combination of modern and historic, energy efficient, easy to work with and good light diffusion, choose flush lighting.

Sources

How to attach a ceiling rosette

Before you install a ceiling canopy, you should first consider how big you want it to be. If you have a large room with a large chandelier, consider using a ceiling canopy to match. For a smaller space, you might prefer a small, more minimalist ceiling rose instead.

Since ceiling roses come in all shapes, sizes and materials, we recommend taking some time to ensure the material and color match your decor.

After purchasing a ceiling canopy, the next step is to prepare it for installation. Remember, if you need to paint it, it’s a lot easier to do it before fixing it to the ceiling. The easiest way to paint a ceiling rose is to apply a few coats of spray paint and then use paint and a brush for decorative detail.

Instructions for mounting a ceiling rosette. A plaster ceiling rose is a beautiful feature in a historic building and the more modern ones can work well even in a new building. You can buy plaster ceiling roses in a variety of styles fairly cheaply. In most cases, plaster ceiling roses require a hole drilled through the center to accommodate the lighting wire. Do this with care and make sure you use a drill bit that is the same diameter as the cable going through the hole.

As with any work on electrical wiring, you must first turn off the power at the mains. Remove the fixture and, if present, the existing ceiling rose, leaving just a single wire hanging down. If there is no existing ceiling rose and the ceiling is very smooth, it is advisable to lightly sand the area where the new rose will be fitted. This creates a better surface for the plaster adhesive.

Hold the new ceiling rose and lightly draw it with a pencil (get someone to help you with this if necessary). You now know where to apply the plaster adhesive.

If you’re installing a larger ceiling rose, it’s a good idea to drill a few screw holes through the rose so you can screw it to the joist above. After the adhesive has set, the holes can be filled with a spatula of a matching colour. Some larger ceiling roses even come with screw holes already drilled. To do this you need to know where the ceiling joists are, so use an electronic joist finder to find them. Mark their position on the ceiling, hold the rosette and mark where the support holes need to be drilled. The holes should be countersunk slightly to hide the heads of the screws.

Small ceiling rosettes can be attached to the ceiling with commercially available plaster adhesive. The suction created should be enough to hold the rosette to the ceiling while the adhesive cures. Use a small glue spreader to apply plaster glue to the back of the ceiling canopy and hold it about 1cm from the edge so it doesn’t splatter.

Thread the rosette onto the lighting cord in the ceiling, align the support holes with the joist marks (if any), then press firmly into place. You need to hold it in place for a few minutes (check the adhesive packaging for exact times). So make sure you have a stable ladder or platform to stand on.

You can then insert wood screws into the support holes you drilled and screw into the joists. The holes should be countersunk and the screw heads should be below the surface. Be careful not to tighten the screws so much that they break the plaster rosette.

Wipe excess plaster adhesive off the edge of the ceiling rose with a damp cloth or sponge. Be careful not to use a colored cloth, otherwise the color can be transferred to the plaster of the ceiling rosette.

Once the glue has completely dried you can rewire the light fixture.

question

What is a Studfinder?

Community Response

The standard stud finder has a short range metal detector powered by a battery. You simply press the switch on the side of the device and move it back and forth against the drywall. It will flash (also beep) when you pass the detector over a nailhead or something metallic. (Nails are usually nailed in studs.) It’s a great tool to have in your box and you don’t need to spend a lot of money for a quality product.

An Introduction to Ceiling Medallions

home decor 0

Whether building or remodeling, homeowners want their personal style to be reflected in every detail of their home. One of the most overlooked areas in interior design is the ceiling. The first step to adding a simple, inexpensive touch to any room is to install a ceiling medallion. Find out what these ceiling ornaments are all about and how to apply them.

What are ceiling medallions?

Ceiling medallions draw attention to the area on your ceiling where you hang fans or lights. These flat medallions give your room a finished look and allow you to reflect your personal decorating style on your ceiling.

How to choose a ceiling medallion

location

Ceiling medallions range from 4 inches wide to 4 feet wide and can be installed in any room in your home with a fixture that you want to highlight. If you are building a new home, your medallion will be placed above your ceiling fans or hanging lights. During a home remodel, you will find it easier to keep your lights in place. Moving a fixture is a bit more labor intensive and you will need a professional to move the junction box.

size

Choosing the right size of locket is important. You don’t want one that’s too small and goes unnoticed. You also don’t want a locket that’s too big to become an eyesore.

Most people place their ceiling medallions to emphasize a light or fan that is a focal point in a room. Because medallions are generally placed well above the fixture, they appear slightly smaller than they actually are. Choosing an appropriately sized locket is a matter of measuring the space, not the intended attachment.

Calculating the correct medallion size for your space is easy using the steps in the example below:

Measure your space and find the square footage by multiplying the length by the width (eg: 12ft x 12ft = 144 square feet). Divide the square footage by seven (144 / 7 = 21). The locket size for a room with these dimensions would be 21 inches or less.

For easier reference, keep these general guidelines in mind:

A room measuring 140 square feet or less would require a medallion 20 inches wide or less.

A room measuring 140 to 210 square feet would require a medallion that is 20 to 30 inches wide.

A room measuring 210 to 280 square feet would require a medallion that is 30 to 40 inches wide.

Any room larger than 280 square feet would require a medallion that is 40 inches wide.

While these numbers are guidelines, you can choose a smaller locket if you prefer. Some designers choose larger medallions to emphasize the ceiling in the room’s design, while others choose smaller medallions to add just a touch of stylish flair. If you’re not sure what size you want, you can measure out the sizes you want on butcher paper and apply them to the ceiling to get a better idea of ​​how each size will look on the ceiling.

draft

Ceiling medallion designs range from simple to elaborate. Common styles include Chelsea, Rochelle, Jefferson, Renaissance, and Egg and Dart.

You don’t have to stick to these more traditional choices when choosing your locket. Many ceiling medallion manufacturers offer dozens of styles featuring historical patterns, curves, and floral patterns in a variety of shapes. For the finishing touch, choose a ceiling medallion that matches the molding or crown molding in your room.

Finished

Most lockets are plain white lockets that can be easily painted to match your room’s decor. Faux wood or metal finishes, or pieces in the room’s accent color add a stylish touch that ties it all together.

Brushed metal, copper and stainless steel finishes blend seamlessly with modern lines and elegant designs. Wood finishes add warmth and are exceptional when paired with matching moldings and trim. Chalk paint or distressed finishes add a touch of timelessness. For a more authentic piece, choose lockets with mirrors or glass embedded in the surface.

material

The choice of material mainly depends on the installation. Most finished lockets are made from lightweight plastic, but some metal and hand-carved wood lockets are available. When choosing the material, consider how much time you will need to install your locket. Heavier medallions will take more time to stick to the ceiling and you will need to use more screws or hold them in place.

How to install a locket

While many homeowners would consider this task a simple project, you should never do anything that you feel uncomfortable or unsafe about. Do not climb high ladders or perform electrical work without another person present. If you’re ready to take on this challenge, you’ll need the following tools before you begin:

Drill

sink bit

circuit tester

screws

Adhesive and paintable latex seals

wood filler

You must paint or varnish the locket before installation.

Don’t be intimidated by the installation process. Follow these simple steps below:

Turn off power at the fuse box before removing the light or ceiling fan. Remove the bracket and the protective plate over the wiring. Loosen the wire nuts and check the wires with a circuit tester to ensure all power is off. Drill holes in the locket with the countersink. Thread the chain and wires through the center hole of the locket; Make sure nothing gets between the medallion and the blanket. Make sure the decorative side of the locket is facing down. Apply adhesive to the back of the medallion and attach to the ceiling. Reattach cables and secure with nuts. Screw in the locket without overtightening the screws. Seal gaps around the ceiling with paintable caulk. Patch screw holes with wood spatula and touch up paint as needed.

When your ceiling medallion is complete and installed, you will be amazed at what this decorative element will add to your space.

For a simple, inexpensive way to add a stylish pop or design point to any room, a ceiling medallion is an attractive option. Now that you know how to choose the right locket and apply it yourself, what’s stopping you from embarking on this adventure to liven up an overlooked area of ​​your home?

Questions about ceiling medallions? Share them in the comment section below!

First you need to open the ceiling rosette by turning it around the perimeter. It is divided into ceiling rose cap and ceiling rose base. The cap part has a hole in the center to route the output wires.

On the base part you will see two clamps, one for the phase wire and one for the neutral wire. Each clamp has screws on both sides forming four connection points. Of these, two distant connection points are on the horizontal plane, while the remaining two are on the vertical plane.

The vertical connection points are used to connect input wires while horizontal connection points are used for output wires.

Now disconnect the two input wires and connect the vertical connection points of the two connectors. Similarly, strip both output wires and connect them across each horizontal connection point of both terminals.

Finally, attach both parts of the ceiling rosette to complete the installation process.

How to attach a ceiling rosette

Before you install a ceiling canopy, you should first consider how big you want it to be. If you have a large room with a large chandelier, consider using a ceiling canopy to match. For a smaller space, you might prefer a small, more minimalist ceiling rose instead.

Since ceiling roses come in all shapes, sizes and materials, we recommend taking some time to ensure the material and color match your decor.

After purchasing a ceiling canopy, the next step is to prepare it for installation. Remember, if you need to paint it, it’s a lot easier to do it before fixing it to the ceiling. The easiest way to paint a ceiling rose is to apply a few coats of spray paint and then use paint and a brush for decorative detail.

Painting a ceiling is a bit trickier than painting the walls, if only because of the awkward nature of working overhead and the risk of mess and dripping throughout the room.

If you do your prep right and invest in the right tools, it’s a job that any competent do-it-yourselfer can do to a good quality.

Painting a ceiling is the first job you should tackle when painting an entire room, to ensure that if you spill paint elsewhere in the room, it doesn’t ruin a coat of paint on the walls and woodwork.

(MORE: How to paint a room)

Tool list for painting a ceiling

preparation

What preparations do I need to make before painting a ceiling?

(Image credit: getty images)

1. Clear room and cover to protect against splashes

In an ideal world, you could move all of your furniture out of the room, protecting it from paint drips while giving you full reach of the room to paint the ceiling without it getting in the way.

Of course, this is not always possible. In this case, move furniture to one side of the room and cover it with dusters. You must use dusters or some other form of floor protection to avoid getting paint on the carpet, floorboards, or tiles.

Expert Tip When working overhead, protective gear such as overalls, goggles, and a baseball cap is a good idea to keep dust from grinding and spattering from your paint roller off your clothing, hair, and eyes.

2. Clean and sand the surface

If the ceiling is smooth with only a few coats of paint, a brush will do to remove dirt, cobwebs, and dust.

If the ceiling is dirty, which is often the case in a kitchen, for example, first wash the ceiling with sugar soap to clean and degrease it. A kitchen sponge is suitable for this.

If the paint is uneven or peeling, sand it down with sandpaper – you can use a sanding stick to speed up the paint. Fill any holes or hairline cracks with a suitable spatula and sand dry. This gives a smoother finish and a better adherent surface for the paint.

(MORE: Mending Band Aids)

Wipe the blanket with a damp cloth or sponge to remove dust from the sanding process.

3. Remove stains

Water-based emulsion paint does not properly cover watermarks or stains. Use a special stain blocker to cover them beforehand.

If you’re already using an oil-based primer or shine, use that instead. This creates a barrier that prevents water stains from seeping through and spoiling your ceiling finish.

(Image credit: Steve Jenkins)

Keep your lights clean

If you have a plain ceiling rose, unscrew the fastener, slide it down and cover it.

Alternatively, use painter’s tape or masking tape around the edges of the fixture closest to the ceiling. Repeat the process to double the width of the tape and cover more of the fitting.

To be on the safe side, turn off the power supply while painting if you can.

How to prepare a textured ceiling

Get a stiff brush and brush the ceiling to remove dirt and debris. You can use a clean broom here so you don’t have to climb a ladder.

It is difficult to paint the edges of a textured ceiling. Duct tape won’t help, so get a small paint scraper (1-2 inches), hold it at a 45° angle on the edge of the quilt, and run it lengthwise along the quilt. This helps create a smoother surface, making it easier to paint straight lines.

application

What’s the best way to paint a ceiling?

Different blankets require different application methods.

A smooth, previously painted ceiling is pretty easy. What is the best brush and paint roller for this type of ceiling? Generally you will need a 2-4 inch brush to cut in and a 9 inch roller to apply the paint.

To paint a simple textured or artexed ceiling, you can use a special segmented foam roller. This is typically a multi-slotted foam roller that provides full coverage. Alternatively, use a block brush or 4 inch emulsion brush to get into all ceiling crevices.

(Image credit: getty images)

Freshly plastered ceilings look different again. They should rest for 4-6 weeks to allow them to dry completely before painting.

The first thing to do with a new plaster ceiling is a fog shore. This is an effectively diluted emulsion.

Use a white emulsion – it’s usually cheaper than a colored emulsion and makes a great base for all colors. As a guide, mix three parts paint to one part water and apply with a roller. Watch out for runs.

Where do you start painting a ceiling?

The best place to start a quilt is in one of the corners. It’s not essential, but makes an ideal focal point.

The first thing to do is cut into the ceiling edges and around all the lighting fixtures. If you have an empty space, do all four edges first before you start rolling the blanket.

Expert Tip For a more professional finish on all edges, overlap the color as usual, but then use a mini-roller to blend the brushstrokes and finish with the big roller.

Create a border around the edge of the blanket that is approximately the width of the brush (3-4 inches).

When you paint the walls, you don’t have to cut into them. You’ll do this when you paint the walls, but make sure you apply the ceiling paint a few inches down the wall to create a base for the wall paint to cut into.

(Image credit: getty images)

How do you cut in when painting a ceiling?

Editor’s Tip You don’t have to be very precise with your lines when cutting in with the first layer. The first coat serves as a base. Be more specific when applying the second coat to get the perfect finish.

“Incising” is the art of drawing a straight line on a ceiling or wall to separate two colors with just one brush.

Use a 4 inch brush fully loaded with paint to incise. Start an inch or two from the edge with the brush parallel.

Slowly move the brush to the edge in a semi-circular motion. Follow the line (hand as steady as possible) until the paint starts to break (don’t cover it completely). To repeat.

In the corners with paint on them, hold the brush straight up and gently wiggle the corner until you get to the edge. Then pull the brush down.

How do you paint a ceiling with a roller?

If you have a rim of paint around the edges of the blanket, the next step is to finish rolling the rest.

Fill your roller bowl with paint, dab the roller in the paint and work the bowl into the roller. Repeat this until you have enough paint on the roller.

For best results, work in one meter increments from one side of the room to the other. Roll into the previously brushed edges as far as possible. Repeat now. This will ensure you don’t miss any areas.

If you’re painting white on white, you should be able to see where you’ve painted by stepping back and finding a position where the natural light is bouncing off the ceiling. You can also place a lamp on the floor to see the painted areas.

(Image credit: getty images)

How do you prevent roller marks when painting the ceiling?

If you have painted an area, go over it again with the roller – without paint, but with a lighter coat of paint. This will help get rid of any lines, drips, or streaks.

Repeat until those are all gone and you have a smooth, clean finish. Make sure you do this while the paint is still wet.

How many coats of paint does a ceiling need?

Be warned – if you use cheap paint it won’t cover as well and you may need to apply an extra coat. Check the reviews before you buy your paint. SteveJenkin

Normally you should only need two coats of emulsion to paint a ceiling. With a freshly plastered ceiling, you may need a third.

Emulsion drying time is typically 2-4 hours – check your paint to be sure. This means you have plenty of time to apply a second coat the same day. Start early and you could have your quilt ready by noon.

Best Tips

What color is best for a blanket?

Standard white emulsion is the popular choice for color and paint. A white ceiling gives the illusion of height, ideal for a small space, but don’t be afraid to try color. A darker color that matches the walls will make a large room appear smaller but cozier.

Matte is the classic color choice for most rooms as it helps hide imperfections. Silk has a low sheen and is easier to clean, but it also doesn’t hide imperfections.

What is the best roller for painting a ceiling?

Paint rollers usually come in two sizes – 9 inches and 4 inches. For ceilings you need the 9 inch option. Professional painters and decorators can use 12 inch rollers, but you must be sure to use a roller to get a good finish.

Rollers sleeves (the piece where the paint goes) usually have a woven cover. The thickness of the woven cover is called the pile or pile.

Use a medium pile for smooth or newly plastered ceilings. This is the most common one you’ll find at your local hardware store. This reduces paint splatter and adds a bit of texture.

If you want a smoother finish, use a short nap roller mantle or a smooth foam roller. These are typically used to shine doors.

To eliminate ladders and paint faster, invest in a roller extension pole or purchase an extension pole with an integrated roller.

Coves and ceiling rosettes

How to paint coves and ceiling rosettes

If you have a cove that needs to be painted the same color as the ceiling, you can paint the cove with a brush first. This allows you to overlap where the fillet meets the ceiling. This will make it easier to paint the rest of the ceiling with a roller.

If you want to paint the coving a different color than the ceiling, use painter’s tape to get a clean, straight line. Allow the paint to dry before applying a second coat (and possibly a third). Wait until the paint is completely dry before removing the tape.

If you are having a new coving installed, have the ceiling painted until the installation process is complete.

For ornate ceiling roses, traditional coves and cornices you will need a small 1 or 2 inch brush. Dab the color into any crevices, then brush across to spread the color. Don’t apply too much paint at once as this will cause runs.

Tips for painting the rest of the room

Check out our other painting guides for more help to give your room a quality finish: