Roborock S5 How To Clean Sensors? All Answers

When it comes to impressing your guests and improving your overall mood, tile floors are your surprising secret weapon. It’s really interesting to see how tile floors can completely change the atmosphere of your home. A different color or type of tile can instantly add a more European flair to your kitchen or make your bathroom feel like a relaxing spa. The best way to thank your tile floors for adding value to your home is to clean them regularly and properly. Here are our favorite tips for cleaning and mopping tile floors.

Understand what’s under your feet

The first step is to have a basic understanding of the different types of tiles. Generally you have three types: vinyl, ceramic/porcelain and stone/marble. Vinyl is by far the easiest, ceramic/porcelain is a bit trickier, and stone/marble is the most maintenance-intensive. Let’s start with vinyl because that won’t take time.

Cleaning tips and materials

1. How to clean tile floors with vinegar?

To clean vinyl floors, you only need a few utensils from your kitchen. Apple cider vinegar can clean your vinyl floors without damaging them at all. After sweeping your floor, simply pour a cup of apple cider vinegar into a gallon of warm water. Dampen your mop with the mixture and instantly wipe your floors clean. If you find more stubborn stains on your floor, you can put a little baking soda and water on a washcloth and easily wipe away. The best thing about these ingredients is that they are all natural and harmless to your pets or children. You’ll still watch helplessly as your kids eat food they dropped on the floor, but at least you can rest assured they won’t be eating any chemicals from your cleaning solution.

2. Best way to thoroughly clean tile floors and grout

Next we have ceramic/porcelain floors. The key to a clean ceramic tile floor is the right mop. Using a sponge mop on your ceramic tile will only push the dirty water into the grout and make it even more difficult to clean when it dries. The same rules also apply to porcelain stoneware. To get the tiles clean, including any joints between them, use a leather mop. Chamois mops are very gentle yet effective at removing dirt from your pretty tiles. You can use any mild detergent, but we like Honest Floor Cleaner because it smells fresh and uses natural ingredients too.

With delicate tiles such as slate, marble and other types of stone, it is more important to focus on the type of detergent or soap. Anything with a high PH level can damage and etch the surface of your tile. A smart purchase for your stone or marble tiles is the Blackdiamond Stonewash brand. It works for both marble and stone tiles, even enhancing their natural shine and color. The joints will also get nice and clean with your window cleaner, just like with ceramic and porcelain floors.

Best cleaning solution: Roborock S6 MaxV

Okay, if we can be completely honest, all of these tips are wonderful and can keep your floors as long as you want. However, it takes a lot of time and effort. If you have a sensitive back or weak knees, you need to slow down even more to stay away from the chiropractor or massage therapist. What if we could combine all of these tips and you didn’t have to do any of it? This is where the Roborock S6 MaxV comes into play. Its powerful suction gently cleans your tiles and finishes the job with a built-in mop. The vacuum’s bristles are soft for your ceramic and porcelain floors, and the mop is suitable for all floor types, including vinyl and stone. Visit Roborock.com for a video demonstration and see how the S6 MaxV can make anything, not just tile floors, more comfortable for you.

You may also like

5 tips for choosing the best robot vacuum for tile floors

Best robotic vacuum cleaner for vinyl plank floors

How to clean and maintain vinyl plank floors

How to choose the right robot vacuum for hardwood floors

The easy way to take care of your wooden floors

The best robot vacuum for laminate floors in 2019

main features

Capacity: 480ml;

Compatible with all Roborock Roborock Mops: S5 Series, S6 Series, S7 Series, E4Mop, E5Mop;

Derived from plants and scented with tea tree oil;

Boosts cleaning power and leaves your home smelling fresh.

Common vacuum cleaner problems and how to fix them

Our lives are hectic at the best of times, and that’s why we expect our time-saving gadgets to work exactly as they should. Some activities are more fun than others, and traditionally vacuuming isn’t one of the most popular. Nonetheless, vacuuming is an essential task in maintaining a clean and healthy home. Although vacuum cleaners are incredibly reliable most of the time, there will inevitably be instances when problems arise, and they usually happen at the most inconvenient times. Luckily, most vacuum problems are easy to solve once you know what’s going on. Here are five of the most common problems we’ve all faced and how to fix them.

Problem #1: There is little or no suction

Lack of suction power is a big problem for a vacuum cleaner – it’s the most important thing it’s designed for! It is also one of the most complicated to diagnose as there can be many reasons for a lack of energy. Here are some of the most common:

A blockage. Clumps of debris, dirt, or other objects can block your vacuum’s head, hose, or throat. Check this carefully by removing the hose and holding a long object, e.g. B. use a broomstick to remove the culprits.

The bag is full. No matter what type of vacuum cleaner you have, a full dust bag will prevent your device from working properly. Get in the habit of emptying it after each use.

The filter is affected. All airflow through your vacuum cleaner goes through a filter. If this filter is damaged or dirty, the air flow will be restricted. Cleaning or replacing your filter can restore the missing suction.

Incorrect adjustment. Advanced vacuum cleaners can automatically detect the floor covering they are working on and increase their suction power accordingly. If your appliance doesn’t, make sure you’re using the correct attachment, brush height, and power setting for the type of floor you’re cleaning.

Problem #2: Your vacuum smells bad

If you want a clean home, you probably want a pleasant smell to go with it. There are several reasons for this, the most common being deposits in the device. If you leave old dirt and dust in the dust bag for a long period of time, there is a risk that any new air that goes through will expel those particles and odors back into the atmosphere. Other causes include frequent vacuuming of pet hair and moisture (from a wet filter) leading to mold growth in the machine.

So how do you improve the smell?

Sprinkle baking soda: Put some baking soda in the dust bag, it neutralizes all odors. Use cinnamon or coffee beans: These additions are excellent and easy ways to leave a nice, sweet smell in your home. Insert scented pads or lavender drops: Adding a scented pad over the filter is a nifty tool to improve the smell of the expelled air. Drip lavender oil over the filter to make your room smell like flowers. Add fresheners to your floors: Carpet fresheners are stronger than cinnamon and last for days. It also gets sucked into your device, leaving a fantastic scent until your next cleaning.

Problem #3: There is a debris trail

You’ve just completed a cleaning task, only to see a noticeable mark of dirt in the spot you just cleaned… While this may be incredibly annoying, it’s also one of the simplest fixes. Assuming you’ve already emptied the dust bag, your next step is to clean the brush and see if it’s broken. If the brush does not rotate freely, it cannot pick up dirt. If it’s not broken and it still won’t spin, the problem is with the internal belt. Consult your manufacturer’s guidelines and replace it.

Problem #4: It won’t turn on or stays on

This is a frustrating problem and harder to diagnose. If your vacuum starts up successfully but then won’t keep running, it’s likely overheated, causing the system to shut itself down. Turn it off and let it cool down for a long time. If your vacuum won’t even turn on, chances are a part isn’t working anymore. Your first step is to test; It’s not the charger or power cord. Plug it into a different outlet or experiment with a different charger if possible. If any of the issues persist, contact a professional or consider upgrading to something new.

How to minimize these problems in the future

two words maintenance and upgrading. Maintaining your current vacuum cleaner will keep it in the best possible condition so it can keep working without problems. Clean it regularly, empty the dust bag, replace the filter if necessary and check for damaged or worn parts. Doing these things regularly maximizes longevity, performance and value.

“If you want to spend less time cleaning and more time living, look into a robot vacuum.”

If your vacuum has regular problems or just isn’t up to standard, it’s time to consider an upgrade. If you want to spend less time cleaning and more time living, consider a robot vacuum cleaner. You can automate them to run anytime, they’re modern and easy to maintain, and some will even wipe. They create a map of your home and return to their charging station whenever they need a new charge.

Roborock is a global leader in robot vacuums, continuously driving innovation and the latest developments in smart home cleaning automation. Our newly announced model, the Roborock H6 Adapt, is the world’s most durable handheld vacuum. The Roborock H6 is exceptionally lightweight, comes with additional accessories and features an advanced sealed filtration system. Here you can see our entire range. If you have any questions or need advice, contact us today.

Convenient to have, robot vacuum cleaners can make our lives easier. Proper maintenance will ensure that your robot vacuum performs at its best and does its job for many years to come.

Robot hoovers do their job all by themselves when properly programmed. There is no pilot to ensure that the vacuum robot does not vacuum up anything that could harm it. Today we would like to tell you how you can protect your Roborock vacuum cleaner and prolong its life with the following six simple steps.

1. Maintenance after each use

When your robot vacuum has finished its rounds around your house, take a moment to give it a little maintenance. Empty the dust bin and clean the filter to avoid losing suction. Check that the wheels spin freely. Inspect the robotic vacuum to make sure it’s working properly. The whole process shouldn’t take more than a minute or two, but it will keep your machine safe and ready to perform at its best when it’s needed again.

2. Replace the filter in time

It’s a good idea to regularly clean your robot vacuum’s filter. However, this robot vacuum cleaner filter still needs to be replaced regularly. Most manufacturers recommend replacing the filter every month. Consult your owner’s manual to see what is suitable for your machine.

3. Take care of the brushes

Make sure you do regular brush maintenance. As part of your regular routine, you should inspect the brushes for debris that may have become wrapped around the brush cylinder. If you notice that dirt has built up in this area, it’s time to act.

To thoroughly clean the brushes, first remove them from the vacuum robot. Remove any hair, thread and debris that has become tangled around the brush. There are simple and inexpensive cleaning tools on the market that make this process a breeze. Alternatively, you can use scissors along the brush to snip off any tangles in it and then simply comb out the pieces. Snap the clean brushes back into place and your robot vacuum is ready to keep your home nice and tidy again.

4. Clean thoroughly monthly

You should thoroughly clean your vacuum robot at least once a month. Wipe the sensors well so your robot vacuum can see where it’s going. Clean all wheels, removing dust and hair that may have gotten wrapped around them. Do a thorough inspection and wipe the machine completely.

5. Avoid extreme temperatures

Excessive heat and cold can damage the robot vacuum’s battery and other sensitive components. When choosing a location for the home base, make sure it’s far from heating vents or areas that get a lot of sun. A garage or attic is not a good place to store your robotic vacuum as these areas generally do not have adequate insulation to protect it from extreme temperatures.

6. Use only manufacturer’s accessories

If you need to purchase replacement parts like filters or a battery, buy from the original equipment manufacturer. It might be tempting to buy cheaper aftermarket accessories, but these parts aren’t built to last for your robot vacuum. Spend a little more and buy from the manufacturer knowing you’re getting parts designed specifically for your device.

What is the most important thing about a robot vacuum cleaner?

That’s right, the device should clean the apartment reliably!

Therefore, we first check the cleaning performance in our detailed comparison Roborock S7 vs. S5 Max.

We gave them a pretty dirty challenge during our testing:

Extreme test on different floor types (laminate, short-pile carpet, high-pile carpet).

Cleaning test in our everyday life (over a longer period of time).

Roborock S7 vs S5 Max: Cleaning Test Report

Roborock S7 Roborock S5 Max. suction power in Pascal 2500 Pa. 2500 Pa. Cleaning result on a hard floor 98% 96% Cleaning result on a low-pile carpet 93% 84% Cleaning result on a deep-pile carpet 96% 88% Special cleaning properties? “Buttons”. They thoroughly brush through the carpet fibers so that the robot can better remove the dirt. The brush is “floating”, which makes it easier to clean uneven floors. – Carpet detection Yes, with carpet turbo function. It also drives along carpet edges and marks carpets on the map. Yes, with the carpet turbo function. It does not mark carpets on the map. Main brush made of rubber. The “floating” brush can better adapt to uneven floors (e.g. carpets). Made of bristle hair and lamellae. Side brush 1 plastic side brush 1 plastic side brush Removal of animal hair/long hair Very good result. Hair hardly wraps around the rubber brush. Does not come with a cleaning tool. Hair occasionally wraps around the brush. You can remove them with the included cleaning tool. Cleaning performance in corners Good Good Number of cleaning modes 4 (Quiet, Balanced, Turbo, Max) 4 (Quiet, Balanced, Turbo, Max) Dirt container 470 ml 460 ml HEPA filter Yes Yes

check price*

check price*

Cleaning test on laminate

The Roborock S5 Max and S7 had no trouble cleaning the laminate.

Both devices easily remove all types of dirt (lentils, oatmeal, sand) from hard floors.

Roborock S7 Roborock S5 max

When cleaning hard floors, you will be equally satisfied with both models. Here the two vacuum robots are on par.

cleaning on carpets

Carpets tend to be much more demanding for all types of robotic vacuums.

Roborock S5 Max vs. S7: Low pile carpet

Roborock S7 Roborock S5 max

Comparison of Roborock S7 and Roborock S5 Max on a deep pile carpet

Roborock S7 Roborock S5 max

The Roborock S7 masters this challenge better than the S5 Max.

Grainy lentils…

Light oatmeal…

Sand…

The Roborock S7 has shone with flying colors on both low-pile and high-pile carpets.

This is thanks to the following features:

Greater suction power.

Better features of the brush holder.

The improved carpet detection function.

Let’s take a closer look at the unique features of the Roborock S7.

The strong suction power of the Roborock S7 (2500 Pa. vs. S5 Max: 2000 Pa.)

The increased suction power comes in handy on the carpet.

This allows the Roborock S7 to easily remove dirt from the carpet fiber… and vacuum it up.

“Floating” brush holder with buttons

The Roborock S7’s main brush is “Floating”.

This means: The brush can move left/right as well as up/down.

Now the brush adapts optimally to the floor surface.

Left right up down

This makes it easier to clean bumps on the carpet and remove dirt more effectively.

The Roborock S7’s brush holder also has “buttons” (the S5 Max doesn’t have that).

The nubs “dig” into the carpet, like a plow in agriculture. This loosens the dirt from the carpet fibers so the rubber brush can catch and remove it.

Source: roborock.com

carpet detection function

Both the Roborock S5 Max and the S7 have a reliable carpet detection function. The vacuum robot automatically switches to the highest cleaning mode as soon as it drives onto a carpet.

But the Roborock S7 has even more to offer.

It also marks carpets on the map thanks to the new ultrasonic sensor.

Ultrasonic sensor marking of the carpet on the map

This marker can serve as a landmark. You can define no-go zones or no-mop zones or have the carpet cleaned separately (several times if necessary) by the robot.

Furthermore, the Roborock S7 has a special handling on the fluffy ground. It also cleans the carpets separately along the edges.

A great feature, because this is where dirt usually accumulates!

Conclusion on cleaning performance on carpets

The Roborock S7 cuts a much better figure on the carpet.

Our special award: The Roborock S7 is one of the best vacuum robots for carpets

The strong suction power and the innovative features lead to better results in our cleaning tests on carpets.

Long story short: The Roborock S7 is the right choice if you have a lot of carpets at home!

Roborock S5 Max vs S7: Long hair

Both Roborock vacuums have no trouble removing hair.

The only difference is that there is a lot more hair wrapped around the Roborock S5 Max’s brush.

This is different with the Roborock S7. Hardly any hair wrap around the rubber brush.

Cleaning the brush is also much easier on the Roborock S7 compared to the S5 Max.

With the Roborock S7 you can easily “pull out” your hair. With the S5 Max, you need to use the included cleaning tool.

Roborock S7 Roborock S5 max

So if you share your home with long-haired pets (or humans), the Roborock S7 (including the maintenance-free rubber brush) is a better choice.

check price*

check price*

Roborock S5 Max vs Roborock S7: Daily Cleaning

Both Roborock vacuum robots cleaned our apartment (no pets, mostly hard floors, no children) without any problems.

The cleaning result is excellent even in the medium cleaning mode (Balanced).

All you have to do is start the vacuum robot…

…wait about 40 minutes.

…and your apartment is sparkling clean.

To cut a long story short: everyday dirt can neither harm the Roborock S7 nor the S5 Max. You will be 100% satisfied with its performance.

check price*

check price*

The problem

Lately my Roborock S4 vacuum was reporting something like “Error 10 – Check the filter, if it’s wet, dry it” every time it was run. The official Roborock support article simply states that the filter should be thoroughly cleaned and dried.

The problem is that even after thoroughly cleaning and drying the filter for 48 hours, it still reported the same error on every run.

The solution

Since official support didn’t help, I searched the web and came across a reddit post where the original poster had the same issue. Many commented that the real solution is to use compressed air to clean the rear vent.

Sure enough, after cleaning the vent with compressed air, the vacuum has been running flawlessly for over a week now. Hopefully this helps someone else who encounters this problem.

Roborock water filters remove invisible impurities such as sediment in tap water, preventing limescale deposits from damaging the robot.

Two filters constantly control the water flow, regardless of the amount of water in the tank.

A silicone ring around each seal prevents water from leaking around the filter

The easily removable filter can be replaced quickly and without tools when it needs to be replaced

The filters intelligently control water flow, only letting water through when the wipe dries, preventing excessive flow and puddling.

This accessory is compatible with S6 Pure and earlier models such as S6, S6, E35 and E20

The DROP salt sensor alerts you to add salt before the salt runs out. The salt sensor comes standard with all DROP softeners.

features

• Notifies you via push notification, SMS or email when it’s time to add salt

• Standard with all DROP softeners

• Can be added to any softener with a 3.5″ or 4″ salt tank

• Proprietary paddle designs provide the most accurate level gauge on the market

• 7 inch paddle extension available

• 1 year warranty

Salt Sensor Sales Sheet