Are you looking for an answer to the topic “rocks under above ground pool“? We answer all your questions at the website Chewathai27.com/ppa in category: Top 867 tips update new. You will find the answer right below.
Table of Contents
What is the best thing to put under an above ground pool?
A pool pad is a material designed specifically to place under your above ground pool. They are generally used on a concrete slab. The pool pads can be cut to perfectly fit your pool’s base. Pre-cut pool pads are made of a super durable material and will not trap moisture.
What kind of rock goes in an above ground pool?
Either River Jacks, Brown Landscape Stone, or Pure Red Landscape Stone is a necessity for around an above ground pool.
How deep should stone be around an above ground pool?
Planting around your above ground pool
If you’re looking for maximum benefit then go with a bigger crushed stone like 3/4 inch – 1 and 1/4 inch in size.
What can you put under a pool besides sand?
- Interlocking Foam Tiles.
- Carpet.
- Intex Ground Cloth.
- Flooring underlayment.
- Carpet padding.
- Sand.
Landscaping after you install an Above Ground Pool
Deciding what to put under Intex pools is something you should give a lot of thought to before installing your pool. Choosing the right material will prevent potential problems and extend the life of your inflatable above ground pool.
Whether your Intex pool is on concrete, grass, gravel, paver or a deck, we have a solution for you.
Why it’s important to choose the right material for your portable pool
The image shows an above ground pool on grass. Choosing the right material for your pool is important.
When it comes to what to put under your Intex or other inflatable pools like Bestway and Summer Waves pools, there are several options. Each underpool material has its pros and cons.
Here are some of the benefits of choosing the right material to put under your above ground pool:
Protects the floor from abrasions and punctures
Prevents mold/mildew
Smoother underfoot
Makes cleaning easier
Stops damage from grass and insects
Where to place an Intex pool?
Before you decide what to put below your above ground pool, you need to decide where to place your Intex pool. Popular options include grass, concrete, cobblestone, gravel, dirt and on decks.
Concrete is probably the best option as it is usually 100% level and smooth. In addition, grass cannot grow through concrete, nor can animals and insects damage or pierce it.
Grass or dirt is also another good option, as long as it’s leveled properly and you’ve killed off the grass first.
You could place your pool on pavers, but the weight of the pool can compress the pavers and throw them out of shape. That means you’ll have to fix them if you remove your pool.
What to put under above ground pools?
After you have decided where you want to place your pool, it is time to decide which undermat you will use for your Intex pool. The right material can extend the life of your pool.
Here is a list of the most popular materials to put under an above ground pool, whether it’s grass, paver, gravel, or concrete.
Interlocking foam tiles
carpet
Intex floor cloth
flooring underlay
carpet padding
sand
How to choose what to put in an Intex pool
There are five main aspects to consider when deciding what material to use under your pool.
Breathable
Resistant to punctures
thickness and feel
Easy to install
Costs
A breathable material helps prevent mold and mounds caused by trapped moisture.
Some materials are inherently harder than others, such as commercial pool pads. This is even more important if you plan to put your pool on grass or soil.
The right material simply feels better on your feet. Some people don’t mind, but having rocks in my feet isn’t my preference. If you choose a thicker material or combine two materials together, you will get a better feeling.
A material that lays flat easily is also an advantage. This means the bottom of your pool is wrinkle-free, making it easier to clean (when vacuuming).
Finally, when deciding what to put under an above ground pool, you should consider how easy the material is to work with and the cost. Although the carpet might be free (if you’re lucky), it’s not easy to cut and could be quite a hassle to install.
Interlocking EVA foam tiles are soft to the touch and a protective choice for under-pool padding.
You can find interlocking foam tiles here and at Walmart, Home Depot, and many other stores.
They offer thick cushioning and feel great underfoot. Provided you install them on a flat surface, the bottom of the pool feels nice and smooth.
They are relatively easy to trim and are lightweight and easy to use.
advantages
– Feel good underfoot
– Offer excellent protection against sticks and stones
Disadvantages
– Not breathable
– Can get expensive
>> Click here to check price and read more reviews.
carpet
Old carpet can be used to go under an Intex pool. The carpet is ideal for children’s pools, Summer Waves and Bestway inflatable pools.
Is it a good idea to put a rug under an above ground pool? Carpet is actually a great solution. It offers good protection from rocks and sharp objects piercing the bottom of your pool while providing some comfort under your feet.
If you’re lucky, you can also get it for free!
advantages
– Can be free
– Excellent protection against sharp objects
– Breathable
Disadvantages
– Not as soft as foam tiles
– Harder to crop
You can use an Intex pad to walk under an Intex, Bestway, Summer Waves or Kiddie pool.
Most Intex pools come with a groundsheet. The cloth that comes with Intex pools is more of a tarpaulin. It offers some protection from abrasions or punctures, but reviews say it’s very thin and may not last all that long.
Many Intex pool owners are opting for a higher quality aftermarket solution.
advantages
– Inexpensive protection for your pool
– Cut to the size of your pool
– Ready to install with minimal effort
Disadvantages
– Worse quality
– Offers only minimal protection
>> Click here to check price and read more reviews.
Aftermarket pool pads
Liner Life Blue Wave Liner Pad pre-cut pool liner for above ground pools
Intex isn’t the only company making liners for above ground pools. In fact, there are many of them that offer quality products suitable to go under your pool.
They are often made from extremely tough materials that are resistant to pests, grasses, roots, animals, insects and other rocks.
The other benefit of using a professional pool mat is that some of them are pre-cut to the size of your pool, saving a lot of time and effort during installation.
advantages
– Extremely tough and stronger than other options
– Many are cut to size
Disadvantages
– More expensive than other options
Check pool pad prices here:
Liner Life Precut pool liner
Blue Wave liner pad for above ground pools
Flooring underlay & carpet padding
Floor underlay, also known as padding, is a spongy, flexible foam sheet that comes in rolls. It is usually laid between the laminate floor and the subfloor.
The carpet padding is thicker than the floor underlay. It’s also an economical option to place under your above ground or Intex pool.
If you’re not sure what to put under your inflatable pool, this could be a good option. It’s cheap and easy to work with. However, both are fairly thin and don’t offer much protection.
You’ll probably need a few layers or else you’ll feel rocks or stones under your feet while swimming. Foam tiles are a better choice if you want to avoid this.
advantages
– Very low cost
– Easy to cut and process
– Widespread
Disadvantages
– Provides minimal protection
– Not breathable
– Thinner than foam tiles
sand
Is sand a good choice for going under a pool?
Should You Put Sand Under Your Above Ground Pool? Sand is not recommended for portable pools such as the Intex Easy Set Pools.
While it is easy to lay down and align, and may seem like an ideal material, it can easily erode and partially wash away in heavy rain. Animals and bugs have also been known to tunnel through it.
When this happens, it can cause your pool to shift, or at best you will feel “holes” or depressions under your feet when you swim where the animal has been digging.
advantages
– Easy to install and align
– Inexpensive material
Disadvantages
– May shift or erode over time
– Animals and bugs can tunnel through
installation tips
Should I put a tarp under my Intex pool?
As a bare minimum, you should place a tarp under your Intex pool. Inflatable pools, Bestway and Summer Ways pools also benefit from a tarpaulin.
Although a tarp will help protect your pool, there are far better options, such as a cover. B. Foam tiles or suitable commercial pool pads.
What to put under the paddling pool?
Paddling pools and children’s pools can be treated like other pools. Choose a material that feels comfortable underfoot and protects the bottom of the pool, such as nylon. B. carpet or foam. A thicker material can minimize injury if your child slides over it.
A breathable material is not so important for paddling and children’s pools, as they are often temporary.
What can I put under my inflatable pool?
Inflatable pools or inflatable pools such as children’s pools, paddling pools, and Intex Easy Set pools work well with carpet, interlocking foam tiles, and commercial pool pads
What to put under an above ground pool on grass?
Before putting an above ground pool on grass, you should make sure you kill the grass with weed killer. Some grasses and plants are particularly tough and can penetrate the bottom of your pool.
After killing the grass, you can use rugs, foam tile, commercial pool padding, or any of the other options mentioned in this article.
What to put under an inflatable pool on concrete?
Concrete is a great material to stand your inflatable pool on as it is usually 100% level. However, you must put a material under your inflatable pool to protect the bottom of the pool from abrasion, such as: B. a tarpaulin or a ground pad.
Concrete is also a very hard surface and feels very comfortable on your feet when using something with padding like carpet underlay or foam.
What should I put under Bestway and Summer Waves pools?
Bestway and Summer Waves pools can use the same materials as Intex pools. Any of the materials listed in this article are suitable for your inflatable, Summer Waves or Bestway pool.
summary
By now you should have a good idea of what to think of as Intex pools. You may also be wondering which chlorine to use for your above ground pool, find out here: Which chlorine to use for an above ground pool
There are several options available and you should consider cost, thickness, material breathability and ease of installation before making a decision.
The location of your pool will also influence your decision. If your pool is on concrete, a softer material is great. However, if you have your pool on dirt or grass, you’ll want to make sure the material is sturdy enough to prevent things from puncturing it.
What materials did you use to house your above ground pool? And how did they work for you?
What is the cheapest thing to put around an above ground pool?
Above-ground pools are not surrounded by concrete as in-ground pools are, so add a walkway instead. No one wants to drag dirt and grass into a freshly cleaned pool. Put down simple stepping stones or build something more elaborate, such as a paver walkway, to keep your feet and your pool clean.
Landscaping after you install an Above Ground Pool
Plan fences first
Good fences make good neighbors and good pool owners. A pool fence is the first thing to consider before planning an above ground swimming pool. The International Swimming Pool and Spa Code sets minimum standards for swimming pools, hot tubs and water features, including fencing standards for private pools.
Even if the pool wall represents a barrier for smaller swimmers, experts agree that this is not enough. Install a fence or barrier at the top of the pool wall and secure the entrance with a detachable or gated ladder.
Your city, county, and state determine exactly how these standards are applied in your area. Check with your local authority for building and fencing codes that apply to you.
Make safety your top priority and you’ll have years of fun and peace of mind.
build walkway
Above ground pools aren’t surrounded by concrete like in-ground pools, so add a walkway instead. Nobody wants to lug dirt and weed into a freshly cleaned pool. Set up simple stepping stones or build something more elaborate, like a B. A paved walkway to keep your feet and pool clean.
Choose plants wisely
Like the right blazer, the right plants can give your poolside a polished, pulled-together look. Before you begin landscaping your pool surround, consider these things:
how much sun do you have
Most above ground pools are in a full sun area. Then choose plants that thrive in full sun. If the area gets partial shade during the day, choose partial shade plants instead.
Consider the root structure of the plant
Plants with extensive root systems can grow under the pool liner and cause a bumpy landing for your feet. Here are a few tips to avoid this problem:
Avoid planting trees near the pool and avoid placing a pool within reach of existing tree roots. When planting a tree, know how wide the roots will grow, and plant even farther away to be extra careful.
Plant shrubs with care. Know how deep and wide the roots grow. Also know how difficult it is to remove them when you want to do a landscape makeover. Finally, consider whether your bushes need regular pruning.
For a low-maintenance alternative, go rootless and use mulch or rocks. See “How to Install a Basic Above Ground Pool Enclosure” below.
Planting for a saltwater pool
If you have a saltwater pool, make sure your nearby plants can use a little salt spray. Some plants are extremely sensitive and cannot tolerate salt, while others are real beach bums.
If you live in a Coastal or Northern state, check out your state’s co-op expansion resources online. Salt tolerant landscaping is a hot topic in coastal areas along beaches and in northern states where salt is used to remove ice from roads.
Palm trees and coastal grasses are often salt tolerant, easy to care for, and popular around pools.
Pro tip: Find out what plants work well for other saltwater pool owners in the area and do the same.
Will pool chlorine harm my plants?
According to the Colorado State University Extension, chlorinated water has no long-term effects on soil microorganism populations. As such, a few excessive splashes of pool water are unlikely to harm plants near an above ground chlorine pool.
What plants are best around an above ground pool?
Evergreen: Evergreens are ideal for planting next to an above ground pool (or any pool) as they have little to no leaf litter. No one wants the added chore of skimming leaves from the pool if they can avoid it. Forego the deciduous plants and choose mainly evergreen plants for your poolscape planting.
Grasses: Large grasses, such as feather sedge, are popular additions to pool edges. When planted en masse they provide privacy and a beautiful swaying effect when the wind blows. Some ornamental grasses require annual pruning, so plan for this in your landscaping budget.
Potted Plants: Some homeowners choose to use mulch or rocks on the sides of the pool and add potted plants farther from the pool (such as along a walkway or on the deck).
Well-placed pots offer an opportunity to add splashes of color with flowering annuals or flowering perennials. As a bonus, you don’t have to worry about leaves or roots in the pool. If you live in a colder climate, you can even bring them indoors for the winter.
Privacy: If you want some privacy in your pool area, plan to adorn your yard with hedges, a privacy fence, layered planting, or implement other garden privacy strategies.
Other considerations:
Avoid plants with spikes and thorns next to the pool wall.
If you don’t like the more economical aesthetics of your backyard pool, cover it with siding to enhance its appearance. Bamboo privacy screens and wooden slats are DIY alternatives to the plastic look of many walls. Alternatively, a full surround deck provides the same effect.
Other landscaping ideas for above ground pools
Paving stones are another popular way to surround an above ground pool. Paving stones keep out weeds and provide a polished look around the pool. You can even use the pavers as a walkway and connect them around the pool for a pulled together look.
Many above ground pool homeowners apply mulch or rocks against the pool wall and leave it at that. When you grow bushes, many will need pruning, and some (not all) grasses will need annual pruning as well. Then there are the roots and the mature size of the plant to consider.
If you want to get started super easy, here’s a way:
To install a simple, above-ground pool edge:
Attach landscape fabric around the perimeter
Add a rim or edging to the pool wall to prevent rocks, mulch or debris from getting under the pool wall
Place mulch or rocks on top of the landscape fabric
Add a border or edging to the outside edge (boulder, rubber edging, steel, wood, brick, etc.)
If you choose to go this route, don’t miss out on colorful blooms or tall, majestic grass near your pool. Just keep them farther away from the wall to make your maintenance easier and hassle-free.
Treats for insects
Pests can be a problem for some homeowners. If you know you have a termite problem, have your termite pest treated poolside. Or, if you have an annual termite inspection, ask your pest control expert if termite treatment around the pool is something you need.
Ant treatments can be DIY. Regardless of whether you have ants in the garden or not, use preventative treatment. Ants can eat holes in the bottom of the liner and leak water from the pool.
Take your favorite ant preventative and apply it along the bottom wall of the pool as often as the label recommends. Don’t skip the part of the pool wall under the patio and apply it consistently during the warm season as the ants go dormant in the winter.
Pro tip: If you’re not the DIY pest control type, ask your local exterminator to take care of it instead.
Immerse yourself in decks
If you want something a little fancier, ask your pool builder if they also build above-ground pool decks. Decks around your in-ground pool, like any other deck, can range from simple to sublime. Decks can be partial or surround the entire pool. It’s up to your taste and your budget.
Other advantages of above ground pool decks:
Decks also serve as covers for your pool pump, various pool gear and pool toys, protecting them from the elements and making the pool look nicer too.
Decks increase your outdoor living space, giving you more space to relax and entertain.
If you want to go super chic, build a gazebo for shade. Some homeowners build a pergola over part of the pool, which you could decorate with climbing vines or other shade plants.
Make a splash with seating
One reason to consider a patio around your pool is that it offers the opportunity to add seating. Decks have space for chairs or umbrellas, so those who want to swim and those who don’t want to swim can enjoy poolside time together.
Add lights to lengthen the day
If you enjoy swimming in the pool and gazing at the stars, you probably need some lighting. Install at least some lighting along the walkway and along the stair railing for safety measures. Adding lights around the perimeter, whether shorter solar lights or tall, elegant tiki torches, allows swimmers to enjoy even more light.
If you want something more sophisticated, install pool lights along the inside walls of the pool or buy lights that float in the pool to illuminate the water while you swim. These are available from Amazon or your favorite pool supply store.
Also, don’t forget about the many color options. Red, white and blue would be perfect for a 4th of July swim party.
If you’re too busy enjoying the fleeting summer season, let one of our local lawn care professionals take care of your lawn. They mow, edge and make sure the grass clippings don’t end up in your above ground pool.
Main Photo Credit: Chris Grazioli | flickr | CC BY 2.0
What can I put under my pool to protect it?
By far the best material to place under a swimming pool liner is Armor Shield or Gorilla Pad. These materials are breathable allowing moisture to escape and are extremely tough, keeping insects and moles from coming through and piercing the vinyl pool liner.
Landscaping after you install an Above Ground Pool
One of the biggest concerns or questions for any above ground pool buyer is, “What should I put under the pool liner during installation?” That’s a good question and the answers may surprise you. Every pool installation is different, but there are some general guidelines that must be followed to ensure your above ground pool is installed correctly. Using the wrong materials can cause the pool to corrode or rust prematurely. Follow us as we dispel the myths behind several common materials used under pool liners and help you make the right choice for above ground pool installation.
Above ground pool design
The typical vinyl liner above ground pool liner is actually designed to be installed directly onto the ground with no additional protection for the pool liner. This is perfectly acceptable if the floor is prepared to avoid damage to the vinyl pool liner. It’s been done this way for decades and great results can be achieved. Occasionally you might come across a pool that comes with some form of floor protection, but this may or may not be the optimal material to put under your pool. Let’s discuss the pros and cons of each typically used material.
natural soil
This is the most common finish for a pool installation and certainly the cheapest. Installing your above ground pool directly on the ground is easy and requires no additional costs. To go this route, you need to make sure the bottom is free of rocks, roots, glass, or any other debris that could puncture your pool liner. This is done by simply picking the debris from the earth until you can’t find any more. Then smooth the surface with a rake or shovel until an acceptable level of floor smoothness is achieved.
sandy bottom
Sand is probably the most commonly purchased and discussed pool floor material. This is because sand is readily available almost anywhere in the country. Second, when used sparingly, it does an acceptable job overall. The downside of sand is that the grains don’t stick together. This causes the surface to be uneven and footprint-like. Sand is dirt free and does a good job of creating a smooth surface for the pool liner, but if the sand is more than 2-3 inches thick, the bottom will be soft and footprints will be present. Footprints make the pool floor bumpy and make it difficult to vacuum the pool.
Plastic film and foam floors
You can read a lot here about the use of plastic films as an additional protective layer. Plastic sheeting is the absolute worst material to place under an above ground pool during installation. It does not prevent weed growth and does not control insects and critters. But the most important reason to avoid plastic sheeting is that it causes a swimming pool to rust very quickly. Avoid plastic sheets, foam sheets, foam rollers, roofing felt and other materials that cannot penetrate water. All of these materials and probably a few others are commonly used and are all extremely bad for a swimming pool. Roofing felt is petroleum based and will react with the vinyl causing damage and discoloration. The reason for this is that the swimming pool liner “sweats” or releases large amounts of condensation. This condensation is sucked into the soil below, allowing the pool walls and frame to dry out. When using plastic film under the liner, the condensation is collected and cannot be absorbed by the floor. This keeps the pool wall and frame soaked 24/7 and quickly leads to widespread corrosion.
Carpet under the pool
Sometimes we are asked if we should use carpet under a pool liner. The answer here is to avoid it too. Carpets retain moisture and remain damp, promoting rust. Aside from that, the carpet smells bad and rots under these conditions. Carpet will not stop Nutgrass or Critters and has no benefit.
Pelvic floor padding
By far the best material under a pool liner is Armor Shield or Gorilla Pad. These materials are breathable, allow moisture to escape and are extremely resilient, preventing insects and moles from entering and piercing the vinyl pool liner. The Armor Shield and Gorilla Pad come pre-cut and sized for easy installation. Armor Shield pool floor padding and pool cover are both highly recommended even when installing an above ground pool on concrete. I’ve included a link to another blog that describes installing an above ground pool on concrete surfaces.
Best recommendations
I may have left out many other materials that someone might use during installation under an above ground pool, but you can decide what works best for you. A good rule of thumb is to remember that corrosion will follow if water cannot pass through. If it is petroleum it will react with the vinyl and ruin your pool liner. If it has holes, nut grass or critters can pass through. I’ll give you my proven method to protect your liner from the above problems. During installation I would follow the following procedures for best results:
1.) Smooth the pool floor as best you can and remove any debris. Use a small amount of clean fill dirt or sand of any kind to smooth if necessary.
2.) Apply a weed killer that specifies that it works against nut sedge or nut grass. Use as instructed. Nut Sedge is the only weed or grass that can grow through a pool liner.
3.) Use a pool floor mat like Armor Shield or Gorilla Pad to raise the pool liner off the ground and keep moles, bugs or insects at bay. If your pool is buried deep in the ground or life is scarce in your area, you can skip the bottom padding, although that’s a good thing. But I would never pass on the weed killer. I’ve seen Nut Sedge grow through pool liners even when the pool was sunk 2-3 feet into the ground.
4.) Clear an area around the outside of the pool approximately 30cm from the pool wall. Fill this area with gravel, rocks, or wood chips. Spray this area with weed killer as well and keep a weed and grass free zone at all times. Nutgrass will grow from the outside, under the pool wall and through your vinyl liner. Keep this area around the pool inhospitable to insects and animals. If your pool is buried deep in the ground or critters are scarce in your area, you can skip the bottom pad, but I would never do without the weed killer.
What is the best stone to put around a pool?
- 1 TRAVERTINE. The rich brown and red undertones of travertine allow it to blend completely into a classic landscape and architecture. …
- 2 LIMESTONE. …
- 3 MARBLE. …
- 4 GRANITE.
Landscaping after you install an Above Ground Pool
If you are considering natural stone for your pool deck, read on to find the 4 best natural stones to use for your pool deck.
1 TRAVERTIN
Travertine’s rich brown and red undertones allow it to blend fully into classic landscape and architecture. Travertine is a natural stone that absorbs water immediately. Therefore, it is safer than some other materials. Regardless of the weather conditions, travertine always feels cool. Simply put, it is easy for the natural stone to withstand high temperatures. With a travertine pool deck, you don’t have to worry about burning your hands or feet.
2 LIMESTONE
Limestone is well known for its earthy tones often found in ancient structures; The natural stone is also available in different colours. These bright colors can be exposed to the sun or all weather conditions for several years. This natural stone is fossilized organic and inorganic material that gives it a silky texture. This is a quality not found in other natural stones. This texture makes limestone tiles the softest natural stone there is.
3 MARBLE
As you may know, marble is quarried in mountains around the world. It has a premium feel and look that makes it luxurious. To put the grandeur of a marble floor in perspective, they are classic, stylish and opulent. A timeless beauty. The quality of marble can be recognized by its translucency. One thing to keep in mind is that your pool deck should not be polished as it can pose a risk of falls and slips.
4 GRANITE
If you are looking for hard material, granite is your answer. Granite’s toughness, durability, and classy looks give it the opportunity to be among the top four natural stones to use for your pool deck. In general, granite has high water resistance and creates an appearance that represents elegance.
There are many other materials you could go for, but these are the top 4 out there. Always go for quality as it pays off in the long run.
How much gravel do I need for above-ground pool?
Typically gravel trenches extend at least 2 feet around the perimeter of the pool. You can either measure from the center of the pool to the outer edge of the gravel area, or you can add the width of the gravel area to your “pool radius.” Round up to the nearest half-foot.
Landscaping after you install an Above Ground Pool
What do you backfill above-ground pool with?
Backfill Using Regular Earth And Add Rocks Or Mulch Across The Top. It is common to add rocks or mulch around the perimeter of an above-ground pool as this can be aesthetically pleasing in addition to helping to prevent erosion and stop grass and other foliage from growing against the wall of the pool.
Landscaping after you install an Above Ground Pool
In addition, it is becoming increasingly popular to install an above ground pool partially in the ground. Many people do this for aesthetic reasons, while others are looking for a more affordable solution as the cost of in-ground pools has increased significantly. When an above ground pool is placed partially underground, a hole is dug that is significantly larger than the size of the pool. After the pool has been placed in the hole and filled, the larger hole surrounding the pool must be backfilled.
Even if an above ground pool is installed entirely above ground, a small amount of backfill is still required to cover the rails and slabs on the bottom of the pool and create a natural barrier that prevents moisture from flowing underneath the pool wash away the sandy bottom on which the pool rests and endanger the structure.
Since most yards are not perfectly flat, part of the yard may need to be dug deeper to allow the pool to stand level; The resulting holes must be filled after installation.
Here’s a look at the materials and processes used to backfill above ground pools.
Pool Backfill Materials
The term backfill generally refers to taking soil that has been excavated from an area and returning it to the hole from which it was originally removed. Using the soil that was moved when the pool was installed for backfill is certainly the most cost-effective approach, as the material is already in place and can help avoid the cost of removing soil from the property. However, some homeowners choose to have dirt brought in from elsewhere if the dirt in their yard does not have a desirable composition.
The backfill process
Here are the key steps when backfilling above ground pools.
Place piles of dirt around the hole
If you are installing an above ground pool semi-underground, it’s a good idea to make a hole about three feet larger than the size of the pool. For example, for a standard 24 foot round pool, a 27 foot round hole is ideal. Once the pool is installed, there is at least a foot left around the pool that needs to be filled with debris.
It may be tempting to pile the debris removed when making the hole farther out in the yard so it doesn’t get in the way of installing the pool. However, this is not a good idea because then the debris will have to be transported back into the pool when it is time to refill it. Leaving mounds of dirt around the hole will make it much easier to backfill. In fact, you only need a shovel to spread the debris back around the pool if it’s stored near the pool itself.
Fill the pool with water
It is important that you fill the above ground pool with water before attempting to refill it and not afterwards. Otherwise you risk squeezing the pool inwards, completely destroying it. Even a small collapse requires additional time and expense to repair. Because traditional above ground pools contain a thin, continuous metal wall, they are not designed to handle inward pressure, although they can handle outward pressure very well as they are designed to hold water above the ground keep.
However, once the pool is filled with water, the water in the pool creates an outward pressure that allows it to absorb the inward pressure and weight created by the filling.
Wait a few days before backfilling
Keep in mind that issues like leaks or other types of manufacturer defects with an above ground pool such as a B. separation of the seams in the liner, usually occurs within the first few days after installation. As such, it’s a good idea to leave the pool open so that potential problems can be more easily identified and accessed for repair. This requires considerably more work after the pool has been backfilled.
Top up to a slightly higher level to allow settling
As you remove dirt that has long been in the ground to accommodate your pool, remember that it will become highly compacted. This means that it contains neither air nor water. However, after it’s been moved and then put back into the ground, it’s likely to contain a significant amount of air. Over time, the air is released and the earth begins to settle and compact again.
Therefore, it is important to fill in slightly higher than the level the earth is ultimately intended to reach to account for the inevitable settlement that will occur. This backfill does not normally need to be compacted. In most cases, simply pushing areas down by stepping on them can be enough. Hand tampers and compaction devices are usually not required.
If an above ground pool is more than two feet below ground or on very sandy soil, experts recommend reinforcing the soil or building a retaining wall.
Fill in with regular soil and add rocks or mulch over the top
It’s common to add rocks or mulch around the perimeter of an above ground pool, as not only can this be aesthetically pleasing, but it also helps prevent erosion and keeps grass and other foliage from growing against the pool’s wall . However, it doesn’t require stones or mulch to go all the way down. Instead, it’s best to refill the tank with the soil that was removed when digging the hole. A few centimeters thick layer of stone or mulch can be applied to this.
Contact Dirt Connections
Contact Dirt Connections today to get answers to all your backfill and pool installation questions from our home improvement experts and to learn more about our services.
Can you put pea gravel around a pool?
Pea gravel can be an excellent material for walls, for walkways, driveways, drainage, and swimming pool decks. That’s how versatile this material is. It has been nicknamed as the Mystique of outdoor landscaping because it can pretty much be turned into anything.
Landscaping after you install an Above Ground Pool
If there’s one material a new landscaper or enterprising homeowner should be concerned with, it has to be fine gravel. This material is very versatile and inexpensive; It really stands out as one of the aggregates for home use. Pea gravel can be used for countless different things.
Pea gravel can be an excellent material for walls, walkways, driveways, drainage and pool decks. This material is so versatile. It has been dubbed the mystique of outdoor landscaping because it can be transformed into just about anything.
What is a Pea Gravel Pool Deck?
A pearl gravel pool deck is made up of many small round stones that are about 3/8 inch in size. During installation, a 3-inch layer of fine gravel is placed on top of larger coarse crushed stone.
Pea gravel is a great material to use as infill or decking for pools. The main reason for this is that it has its permeability factor and promotes healthy drainage in the areas where it is installed or applied. It’s also very easy on the eyes.
If you are looking for a budget pool deck option that will make the pool look great; Pea gravel should definitely be at the top of this list.
Pros and cons of pea gravel around the pool
Advantages:
Excellent Drainage – An obvious benefit to the fine gravel used around the pool is its aesthetic and drainage purposes.
Inexpensive Pool Deck Material – Gone are the days of skyrocketing prices as these days you can literally order anything and everything off the internet and prices can turn out to be quite competitive. Although, to be honest, a homeowner or pool decker might have their hands a little tied when it comes to purchases, so the convenience is still in buying it locally.
Easy to Buy Locally – Stone can prove to be quite heavy and a lot is needed as far as pool covers go. The best way to find out would be to look for local shops in the area. Most of them even offer free shipping if you buy in bulk. Price rates can also be quite friendly, as with all commodities when bought in bulk.
Easy to walk on – Another advantage of fine gravel is that its edges are rounded and smooth. It’s much larger than regular gravel and much easier to walk on. It minimizes the possibility of discomfort when bathers walk around barefoot; This is more or less often the case and therefore pool covers should be chosen and planned critically.
Prevents Weed Growth – It prevents weed growth as the recommended liner for this is about 4 inches or more off the ground. In between, no weeds grow. It means it’s clean and has little to no maintenance.
Low Maintenance – Even more so when it rains or gets wet; It doesn’t get muddy or messy compared to the other gravel types and grades on the market.
Disadvantages:
The pool can be stepped on – However, a major disadvantage to gravel pool decking is erosion. It tends to be carried to other areas or parts of the outdoors if not installed properly. Luckily, this can easily be remedied with a little edging; the preferred material for this would be concrete or a mixture of other fine-grained aggregates.
Can be difficult to remove – It’s also not for the fickle. In the event that decisions and preferences change and the pool deck material is to be completely transformed into something different, this can prove to be a bit labor intensive.
It would take a lot of effort to move the gravel, push it around, or remove it and replace it entirely, so it would be wise to take that into account when making decisions.
What is a Pea Gravel Aggregate Pool Deck?
A pearl gravel aggregate pool deck is also known as an exposed aggregate pool deck. It has fine gravel that can be granite, quartz, or other types of natural stones that are mixed with concrete to create a stylish design.
During paving, when the concrete and fine gravel are drying, rock salt is dumped onto the surface and removed with a trowel. Then the entire surface of the pool deck is rinsed off. The result is an exposed gravel surface that is visually interesting and cooler to the feet than bare concrete.
How to repair a pea gravel patio
A disadvantage of a gravel patio is that it tends to sink into the ground over time. With years of wear, it tends to look cracked and faded.
A common way to fix this would have to be a process called resurfacing. Although the concept is fairly simple and straightforward, the recommendation would still be to ensure professional help is hired.
Can you renovate pea gravel concrete?
However, for basic mechanics, repairing a gravel patio would involve first going over the entire surface with a push broom. This is to remove dirt and excess materials that were not originally part of the patio.
The next step would be to wipe down the entire surface, preferably with a damp rag containing a specific mineral spirits or solvent cleaner.
The next step requires a little alchemy. Two parts of sand must be mixed with 3 parts of fine gravel and then 1.5 parts of cement. The consistency should be similar to peanut butter.
Once the mix is ready, the next step is to apply a layer of cement or cement paste to the surface. These materials usually come with applicators, so it shouldn’t be too harsh. This is to ensure that the mix remains in place for the resurfacing and that gaps in the old paving are filled.
And finally would be the spreading of the resurfacing material. Curing time would vary, but the general consensus is that it should be left undisturbed for at least 48 hours. It’s also important to consider the outside elements like rain or intense heat and so on.
For more information, see our gallery of the most popular types of pool surfaces here.
Should I put dirt around my above-ground pool?
Do not attempt to install an above-ground pool below ground where all sides of the pool are surrounded by dirt. The weight of the soil when it becomes saturated with water will cause the walls to collapse. Professional excavation is recommended if more than a few inches of slope must be removed for the pool to fit.
Landscaping after you install an Above Ground Pool
Do not attempt to install an above ground pool below ground where debris surrounds all sides of the pool. The weight of the ground, when saturated with water, causes the walls to collapse. Professional excavation is recommended when more than a few inches of slope need to be removed for the pool to fit.
Swimming pools provide a clean and controlled environment for summer exercise. Above ground pools come in kits that the homeowner can assemble and do not require you to dig a large hole and pour concrete. Many homeowners want to bury their above ground pool to make it look like an inground pool. This is not safe as the walls of these pools are not strong enough to support the weight of the fill material. However, above ground pools installed in a space cut out of a slope may have a small amount of backfill around them to prevent soil erosion.
Is River rock good around pool?
These small to medium-sized stones, also known as river rocks, are multi-colored and smooth, and one of the most popular rock options around pools. These are a great option to landscape the perimeter of any above-ground pool as well, and in my opinion look much more natural than white pebbles.
Landscaping after you install an Above Ground Pool
Another benefit of landscaping with rocks is that they can (to a certain extent) minimize grass or weeds that may grow around the perimeter of your pool over time.
Depending on your budget, aesthetics, pool layout, and preferences, you have a ton of options that may work better than others depending on what you’re trying to achieve.
In this post I am going to break down everything you need to know about using rocks or stones around your pool and the different types and concepts that are available.
River Jack Stone: perfect for creating natural pools
Multicolored and smooth, these small to medium sized rocks, also known as river rocks, are one of the most popular rock options around pools. These are a great option for also framing any above ground pool and I think they look a lot more natural than white pebbles.
River stones come (as you might have guessed) from streams and rivers, so unlike gravel they offer smooth edges.
If you have an in-ground pool, it’s still best to keep them away from the immediate area around your pool as you don’t want them ending up inside.
Pebbles: smooth and easy to walk on
Pebbles for landscaping come in a variety of colors and ideas for areas off the perimeter of your pool. Pebbles differ from river rocks in the sense that they are smooth and are typically found near the beach.
These are typically oval in shape and are referred to as beach pebbles as they have been smoothed by the ocean to give them their round shape.
While pebbles don’t look as natural as river rocks, they are very popular for pool areas as they are much more comfortable to walk on barefoot.
Avoid gravel or small pebbles near your pool
It is highly recommended not to use small pebbles near in-ground pools that experience heavy traffic, especially pools with a vinyl liner. Tiny pebbles can easily damage your pool and cause major problems for your filtration system, vacuum, and even the pool liner.
Small rocks and pebbles work best for other landscape features in your yard that are not immediately adjacent to the pool area.
boulders
These large rocks are ideal for placing around in-ground pools to give the appearance of a natural pool or a desert element.
Boulders grouped in rock formations allow you to create a variety of unique design elements for your pool, such as: B. a jumping rock, a waterfall or even a grotto.
Landscape utility companies should offer a variety of bouldering options depending on what you’re looking for.
Tip: To get consistency and the color and rock type you want, it’s usually a good idea to buy boulders and stones from the same vendor.
Diving rock
A diving rock can be a really fun element to add as an alternative to a diving board, especially if you’re using boulders for landscaping around the pool.
This is essentially a natural stone that mimics the concept of a diving board and extends beyond the deep end of the pool.
Jumping rocks can be more aesthetically pleasing than a diving board, but be aware that they can get slippery when wet. This might raise some concerns if you have young children.
If you’re considering installing a jumping rock, be sure to read my post: Springboard vs. Jumping Rock: What You Should Know to Learn More.
Rocky Waterfall
When designing your pool area with boulders, a rock waterfall is a stunning feature to consider. It can really add to the overall natural aesthetic as it is a beautiful element and the sound can be very meditative and create a peaceful oasis in your garden.
Rock waterfalls work best with lagoon-style pools and feature a cascade of water over rocks into the pool. This is an opportunity to get creative as there are many different types of waterfalls to create.
A masonry or pool landscape professional can help you create the waterfall of your dreams. You can either configure this waterfall to flow into your pool or keep it separate (but next to) your pool.
pool grotto
A pool grotto is another unique Boulder feature that will add maximum luxury to your outdoor pool if you have the budget. It is usually paired with a waterfall, creating a hidden cave into an extra space in your pool for ultimate privacy.
If you have a large pool, you can even turn the grotto into a swim-up bar. While a grotto is a stunning feature and will enhance the aesthetics of your pool, remember that it requires a bit more maintenance as it is more difficult to clean.
Artificial rocks vs. natural rocks in the pool area
When it comes to landscaping, you have a choice of artificial rocks or natural rocks. Artificial rocks are usually made from a composite material cast in the shape of real boulders. Some people may prefer faux rocks as they are easier to maintain and waterproof.
While natural rocks are obviously becoming more slippery, they’re usually a popular choice if you’re planning a lot of rock or waterfall scenery.
Here are some natural rock types to consult with your pool designer:
granite
limestone
quartzite
mill juice
flint
stone slab
Oklahoma stone
boulder
moss rock
lava rock
The choice of stone depends on where you live. When it comes to installation, safety is definitely an issue as large rocks and boulders are extremely heavy and difficult to manoeuvre.
If you’re considering boulders around your pool, it’s best to have them professionally installed by a pool designer or landscaping company that specializes in this type of work.
They can also recommend the appropriate materials to ensure you choose the ideal stone for your design and budget.
Conclusion
Landscaping your pool with rocks, boulders or stones is a great investment to give it a more natural look. If you have young children, slippery boulders can become a problem, so it’s an important factor to consider when deciding to use these.
When making the final decision on what type of rock to choose for your pool area, consider your budget, personal style and always consult a professional prior to installation.
Do you need to put sand under an above ground pool?
Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.
Landscaping after you install an Above Ground Pool
Above ground pools offer a way to own a beautiful pool without breaking the bank. Installing an above ground swimming pool is also a less intimidating task than installing an inground pool. Of course, properly installing an above ground swimming pool still requires some work, including digging a shallow hole to accommodate the bottom of the pool. Once the hole for the bottom of an above ground pool is dug, it is usually padded with a layer of sand before the pool is installed.
advertisement
video of the day
sand depth
Sand is the recommended base material on which an above ground pool should stand. Sand is used underneath an above ground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, underneath an above ground pool, sand acts as a cushion for the floor, making it more comfortable for the feet. The standard depth of sand that should be used below the bottom of an above ground pool is 2 inches.
advertisement
Other upholstery
In many cases, above ground pool owners also install some type of felt-like or rubberized padding over the sandy bottom of an above ground pool. Additional padding over the sand used will help further protect the liner bottom of an above ground pool from potential cracks and tears. At the time of publication, the price for the padding of a typical 18-foot round above-ground pool is around $80. However, always check the instructions that came with the above ground pool before adding any additional padding.
advertisement
type and volume
Use wall sand as the base material for an above ground pool. Make sure the sand you use is free of foreign objects such as twigs, rocks, or other objects that could puncture, tear, or tear a pool’s vinyl liner. An average 18 foot round above ground pool requires about 3 tons or 2.5 cubic yards of sand to provide a 2 inch base. The cost of a cubic yard of wall sand varies, but $48 is about the average.
advertisement
thoughtfulness
Order the sand for your pool base by the meter, not by weight. Sand can retain moisture, and if you buy it by the ton and it’s wet, you’re not buying enough sand for the base of your above-ground pool. For the base of an above ground pool, add the sand in the center of the pool and spread outwards from there. Finally, smooth out the sand that you have laid out as padding for the pool floor before laying the pool liner over it.
How do you prepare the ground for an above ground pool?
- Choose the best area of your yard to set up your pool. …
- Remove all sod and other vegetation from the area. …
- Determine the lowest point of the pool area. …
- Create a wood level. …
- Replace the metal stake with a 2-inch square wooden stake hammered flush with the ground.
Landscaping after you install an Above Ground Pool
Can I put above ground pool on grass?
Installing an above-ground pool on a natural grass lawn is not a good idea, particularly if you plan on taking down the pool for part of the year. There are several reasons why natural grass and above-ground pools do not mix well, but one of the most important is that the pool is going to kill the grass.
Landscaping after you install an Above Ground Pool
Split
In-ground pools are expensive and permanent, which doesn’t always work for homeowners on a budget or who want flexible outdoor spaces that can be used for multiple purposes. One solution to this dilemma is to opt for a less expensive, less permanent, above ground pool that your kids and guests can enjoy in the summer and that can be taken down in the winter or when the kids get older.
When considering installing an above ground pool, an important consideration is the type of surface you will be installing it on. Because this type of pool is generally considered temporary and installed in an already established backyard, they are commonly placed on lawns.
As this is quite common, let’s take a look at a few things to consider when constructing a pool on either a natural grass or artificial grass surface.
Above ground pools on natural grass
Installing an above ground pool on a natural grass lawn is not a good idea, especially if you plan on dismantling the pool for part of the year. There are several reasons natural grass and above ground pools don’t get along well, but one of the main ones is that the pool will kill the grass. There’s no way around it. Leaving your pool open for a long period of time will cause the grass under the pool to die off.
If you take the pool down over the winter, it is possible for the grass to grow back over time, especially with new seeding. However, there’s a good chance that around the time your natural grass finally looks good again, the weather is getting warmer and it’s time to bring the pool back out, starting the cycle again.
Keeping the natural grass around a pool looking lush and healthy is also a challenge, whether it’s an in-ground pool or an above-ground pool. This is due to heavy traffic, excessive water causing mud and pool chemicals damaging the grass. Since natural grass gets muddy and can be quite slippery when wet, there are also safety issues and of course chasing mud and wet grass into the house.
With all of this, it should be noted that above ground pools are very commonly placed on natural grass areas as this is still the ground cover most commonly found in backyards across the country. Usually these homeowners just accept that in the summer they will have a circle of dead grass and a noticeable indentation where their pool is.
Above ground pools on artificial grass
There are many reasons why artificial grass performs better than natural grass around swimming pools. The first thing to note is that artificial grass can withstand pool chemicals that will quickly kill or discolor a natural grass surface. Second, a properly laid turf will provide drainage that is as good or better than the drainage provided by a typical natural turf.
Plus, there’s no mud to slip or get in, and no wet blades of grass to wipe up every time the kids run out the back door. Artificial grass is also less slippery than traditional grass and easily withstands the heavy traffic that often occurs around swimming pools.
If you place a water-filled pool on artificial grass for a long period of time, the blades will go flat. All you have to do is brush them back up when you remove the pool and your lawn will look lush and inviting again.
One of the problems you will face when installing an above ground pool on any surface is determining whether the surface will provide a solid foundation that can withstand the immense weight once the pool is filled with water. After all, even the water in smaller, above-ground pools weighs tens of thousands of pounds. Therefore, if you are planning to place an above ground pool on your lawn, it is imperative that you consult your artificial grass installer to discuss possible weight issues and options when laying the base to achieve the best possible result. It’s also important to note that placing tens of thousands of pounds on almost any surface for an extended period of time has the potential to cause a depression in the ground.
Regardless of where you place your pool, it is incredibly important that the surface is level. A slight incline that creates a discrepancy of just a few inches can shorten the life of your pool and cause the bottom wall to sag or fail. So if you are planning to place your pool on your artificial grass pitch it is important that you communicate this to your lawn installer. Homeowners often want their natural or artificial lawn to follow the natural slope of the ground; However, this type of installation is not ideal for above ground pools that require a level surface.
Pools, artificial grass and pool area: additional information
Foam pool foundation, Coleman Intex best way pool
See some more details on the topic rocks under above ground pool here:
Rock under Intex pool…need some advice please
I just set up our Intex 15’x42″ ag pool over the weekend. I went over the ground almost with a fine tooth comb but we got in for a dip today …
Source: www.troublefreepool.com
Date Published: 2/7/2021
View: 7095
Home – Blog – What kind of rock do you put around an above …
Either River Jacks, Brown Landscape Stone, or Pure Red Landscape Stone is a necessity for around an above ground pool.Apr 14, 2018.
Source: home-knowledge-base.com
Date Published: 5/29/2022
View: 208
How do you get rid of rocks under a pool liner?
What is the best rock to put around above ground pool? Conclusion. Either pure red landscape, river jacks, or brown landscape stones can work …
Source: www.sluiceartfair.com
Date Published: 4/28/2021
View: 4596
What kind of rock do you put around an above ground pool?
Using gravel or rock is one of the most popular ways when landscaping around your above ground pool. These rocks are readily available and …
Source: sport-topics.com
Date Published: 5/18/2022
View: 6926
Objects Under Liner Problems – Shade Builder
Objects under the pool liner are a real problem for above ground pool owners. … If the rock is sitting in a sand base a little tapping will usually settle …
Source: www.shadebuilder.com
Date Published: 10/20/2022
View: 2907
What to Put Under Intex Pool & Above Ground Pools
You’ll likely need a few layers otherwise you’ll feel rocks or stones under your feet when swimming. Foam tiles are a better choice if you want to avo this.
Source: www.myperfectpool.com.au
Date Published: 11/21/2021
View: 4258
Above Ground Pool On Pea Gravel – How To Discuss
The use of landscaping stones around an above ground pool is recommended. The rocks can be anything from pea rocks to 2 inch we rocks. You …
Source: howtodiscuss.com
Date Published: 9/16/2021
View: 4651
What to Put Under an Above Ground Pool
We work with HomeAdvisor to match you with the best pool builders in your area. Whether you need a remodel, a new pool, or just maintenance help, HomeAdvisor will find the best professional for the job.
Pool Landscaping with stone and gravel
Rock and gravel pool landscaping ideas
#Stone and Gravel Around Pool # Pool Landscaping
As the weather warms up, people here in Carroll County are starting to think about ways to improve their landscaping around pools. Westminster Lawn Service have many products that can be used in these projects.
This post focuses on stone and gravel for pool landscaping.
River Jacks
River Jacks are smooth, rounded stones that are easy to carry barefoot. River Jacks are a beautiful colored stone in shades of grey, brown and burgundy that blends well with many landscaping themes. They are a popular option for landscaping around pools.
2 inch brown landscape stone
Another decorative option for smooth stone around pools is the 1″ or 2″ brown landscape stone, which is also barefoot friendly. This off-white stone is a popular choice.
Pure red landscape stone
Pure Red Landscape Stone is a good choice when it comes to an area that you don’t have to cross with bare feet. The brick red color looks good in landscaping themes that feature shades of red or complement the reddish color.
White/Grey Stone; What NOT to use near above ground pools:
Commonly used in driveways, this stone is limestone, so it will corrode the metal liner around an above ground pool. Also, it’s not barefoot friendly. Either River Jacks, Brown Landscape Stone or Pure Red Landscape Stone are a necessity for an above ground pool.
At Westminster Lawn Landscape Supply Yards we have the solution for your pool landscaping projects.
Landscaping after you install an Above Ground Pool
Landscaping after installing an above ground pool
First, once the installation is complete, fill the pool and let it sit for a few days.
Step two, after landscaping, after you’ve installed an above ground pool and the electrical has been completed, is to ensure your pool has been properly inspected by your city or municipality. This ensures that any changes are made before you spend the time landscaping and you don’t have to pull out things you just planned or installed. I know everyone wants to bring the garden back to their own beautiful oasis #lovemypool.
Then you want to put a layer of crushed stone around the perimeter. Start by laying a layer of landscape fabric to discourage weed growth. The rock layer should be placed a few inches up the wall and about 1-2 feet from the pool. This layer of rock provides two durable safeguards against pool failure. First, the gravel acts as a barrier to heavy rain falling under the pool wall and damaging the bottom. Second, if crushed stone is pressed against the wall instead of dirt, the water can drain and dry faster. This keeps the pool wall as dry as possible so that it does not oxidize prematurely.
Plants around your above ground pool
If you plan to plant your above ground pool, make sure you find plants that are well suited to the moisture and chemicals from your pool. We also recommend adding a landscape border between the pool wall and the plant. This will prevent the roots from getting under the pool liner which can cause channels in the liner.
If you’re looking for maximum utility, choose a larger gravel, ranging in size from 3/4 inch to 1 and 1/4 inch. Try to avoid acid washed stone as this will release acid to the wall and rust if this happens faster than Mother Nature ever could.
Landscaping don’ts
While mulch is a great landscaping material after installing an above ground pool to place plants around, be careful not to place a mulched area too close to the pool liner or the water. Mulching plants around the perimeter of your pool can be very effective as a transition from the pool to your lawn, but remember that liners are made of cellulose; Mulch can attract termites, carpenter ants, and other insects that can damage your pool liner. Mulch can also get into the pool when your feet are wet or when the wind is gusting.
Grass up to the pool can cause two problems. First, in most cases the soil is acidic and can greatly reduce the life of the pool wall or bottom rail. Second, weed on the pool wall needs trimming and a weed wacker can seriously damage a pool wall.
[twitter_follow username=”TeddyBearPool” language=”de”][fbshare type=”button” width=”100″]Related searches to rocks under above ground pool
Information related to the topic rocks under above ground pool
Here are the search results of the thread rocks under above ground pool from Bing. You can read more if you want.
You have just come across an article on the topic rocks under above ground pool. If you found this article useful, please share it. Thank you very much.
