Shears Sharpening Near Me? The 128 Correct Answer

Our goal is to provide professional quality sharpening to every customer. We bring our knowledge, cutting-edge technology and over 25 years of experience to the service of the Mid-Atlantic region.

We will bring your knife blades, scissors and other items back into optimal condition. We are committed to the satisfaction of our customers.

The ProEdge is:

EASY – A sharp edge makes your job easier and safer

Expert – Expert sharpening keeps an edge longer

Economical – A great edge requires less sharpening.

Environmentally Conscious – Sharpening allows you to reuse your items

sustainability

ProEdge has set itself the task of setting a high standard for sustainable,

environmentally friendly operation. We’re always looking for ways

use resources wisely and reduce our impact on the environment.

ProEdge strives to run its own business with a balance of costs

effective, sustainable practices and solutions.

Whether you’re a restaurant chef or an avid hunter, anyone who uses knives often knows the importance of keeping them sharp and smooth at all times. A dull blade can take any simple task and turn it into a long and tedious one. So by making sure your knives are always serviced, you avoid last-minute problems. But how much does sharpening cost you?

Knife sharpening is a relatively inexpensive service. When you buy a DIY knife sharpening set, you only pay about $50 to have it always on hand. In contrast, a professional sharpening two to three times a year will cost you around $75 to $100, depending on the type and number of knives being sharpened.

Keeping your knives well cared for all year round doesn’t have to be a financial burden. You can control how much you end up spending sharpening your knives by choosing how the process is done, whether visiting a local knife sharpening shop, mailing them to an online sharpening service, or buying a personal knife sharpening kit yourself do.

How much does it cost to sharpen a knife?

The factor that will have the most impact on the cost of sharpening your knives will be how you do it. There are three knife sharpening options available:

Visit a local knife shop for professional sharpening Make an online request and mail in your knives for professional sharpening. Invest in a DIY personal knife sharpening kit

In general, you can expect to pay $75 to $100 a few times a year for a professional sharpening service, while a quality DIY kit can have a one-time cost of around $50.

Professional local sharpening

One option for all your knife sharpening needs would be a local knife sharpening service. You may be able to find these types of services at a nearby hardware store, but your best bet is to find a profession-specific store.

Note: most shops have comparable prices but pay close attention to the quality of the services offered; Just because they all charge the same fee per knife doesn’t mean you’ll get the same type of work. Do some homework and make sure the shop you choose uses the right sanding equipment and can guarantee quality results.

Local sharpening costs

When you go to a professional, the price per knife is relatively the same no matter where you go. They charge an average of $1 to $2 per inch of blade for each knife; This can vary slightly depending on the retailer and the exact type of knife you have, but in general you will most often pay this as part of the flat rate.

However, if you require services beyond a simple sanding job, expect additional charges:

If your knife is bent, a $5-$10 repair fee may be added to your bill.

Broken knives or blade tips can cost anywhere from $5 to $20 to have professionally repaired.

If it broke off and needs repairing, expect to pay an extra $5 to $20 depending on the knife type.

Thinning your blade is another add-on that you may request when having your knife set serviced. Here the sharpener reduces the width of the bevel behind the main cutting edge of the knife, increasing its strength and performance. This service can cost around $10.

Professional online sharpening

Online shopping has become very popular and is getting easier by the minute. You can buy everything from food and exercise classes to knife sharpening services.

This can be a great way to sharpen your knives without doing a lot. In fact, some online services will offer to send you a pre-labeled package to wrap your knives in and drop them off at your local post office or other post office to mail them back.

Of course, this makes the process a bit easier than driving to and from a local knife shop, and saves you some time too.

online sharpening costs

The prices you can expect for online sharpening services look similar to going to a local store, with just a few notable differences:

Costs typically start at $1 to $2 per inch of blade.

If you choose to have pre-labeled boxes mailed to you for shipping your knife set, the average amount spent on shipping plus sharpening service is $14.75 per knife.

Without a pre-made label, expect to pay around $10 for shipping (excluding service fees).

Most online services offer discounts for multiple knives. Additionally, some companies offer free shipping when you spend a certain amount on sharpening services (usually around $75).

Some online services also offer a subscription option that allows members to send in their knives for regular sharpening at a discounted rate for service or shipping.

DIY knife sharpening kits for the home

Have you ever heard the old saying, “If you want to do it right, you have to do it yourself?” If this is how you sharpen your knives, then investing in a home knife sharpening set is the best option for you.

There are many types of DIY kits; Some come as an electric device, where you simply insert the blade into the machine, and the spinning stone inside sharpens the knife as you slide it back and forth.

Or, if you’re more old-fashioned and like to use some elbow grease to get the job done, a simple stone, block, and oil set is another excellent option. The options online or in stores are endless and cater to every need.

Cost of the home sharpening set

If you’re not planning on starting a knife sharpening business, or are an avid knife collector and own hundreds of blades, the cost of a kit might make a better choice financially.

Because the only price you have to pay initially is the sharpening kit itself. You don’t need to buy another one as long as it continues to work properly, which could be a few years or less depending on your level of use.

As mentioned earlier, there are different types of sharpening sets available, all of which vary in price:

Electric Knife Sharpener Kits: $30-50 – Electric knife sharpeners were designed to make sharpening knives at home faster and easier. Products like the Edge Keeper or the Narcissus Knife Sharpener are uniquely designed with rotating grinding wheels that give your knives smooth, sharp edges. If you’re looking for a professional sharp blade edge without the hassle of working with a block or the shipping costs, this is a great option.

– Electric sharpeners are designed to make sharpening knives at home faster and easier. Products like the Edge Keeper or the Narcissus Knife Sharpener are uniquely designed with rotating grinding wheels that give your knives smooth, sharp edges. If you’re looking for a professional sharp blade edge without the hassle of working with a block or the shipping costs, this is a great option. Stone and Block Set: $20-50 – Older stone and block sets have been used for generations and give you control over every aspect of sharpening your blades for a very small price. Kits are easy to purchase at almost any department store, hardware store, or online. Easy to use kits like the Sharp Pebble and the Whetstone Knife whetstone are great, reliable products that will give you a fantastic sharpening finish for half the price of professional service. Learn how to sharpen a knife with a stone.

– Legacy stone and block sets have been used for generations and give you control over every aspect of sharpening your blades at a very low cost. Kits are easy to purchase at almost any department store, hardware store, or online. Easy to use kits like the Sharp Pebble and the Whetstone Knife whetstone are great, reliable products that will give you a fantastic sharpening finish for half the price of professional service. Learn how to sharpen a knife with a stone. Professional Sharpener: $200-$700 – These machines are slightly more expensive than the other home options; However, they can save you a lot of money in the long run. If you’re a professional, say in the hospitality industry, and you frequently need to sharpen large quantities of knives, machines like the Tormek T-2 Pro will save you time and money on professional services, possibly within the first few sets you’re sharpening.

$200-700 – These machines are slightly more expensive than the other home options; However, they can save you a lot of money in the long run. If you’re a professional, say in the hospitality industry, and you frequently need to sharpen large quantities of knives, machines like the Tormek T-2 Pro will save you time and money on professional services, possibly within the first few sets you’re sharpening. Chef’s Vision SmarterEdge Knife Sharpener: $11.95 – We’re a little biased, but of course we recommend our SmarterEdge Knife Sharpener, which has a carbon groove for dull blades and a ceramic groove for everyday sharpening. Six designer colors to enhance your kitchen decor and create the perfect complement to all Chef’s Vision products.

Which Knife Sharpening Method Is Worth the Cost?

As mentioned above, the type of sharpening method you choose is a major factor in how much you end up spending. However, if you are unsure which route will save you the most money and/or time in the long term, consider these factors:

how many knives do you have The more knives that need to be sharpened, the more expensive it gets. However, there is also a way you can save if you have a lot of knives that need maintenance. Some online companies offer discounts on a large number of blades. It’s also worth considering that it takes more time to sharpen many knives if you’re a DIY enthusiast.

The more knives that need to be sharpened, the more expensive it gets. However, there is also a way you can save if you have a lot of knives that need maintenance. Some online companies offer discounts on a large number of blades. It’s also worth considering that it takes more time to sharpen many knives if you’re a DIY enthusiast. What knife set do you have? If you are a professional chef and you are using an expensive well designed set of knives then you should consider hiring a professional as they are capable and well trained to do a perfect job. On the other hand, if you just need to sharpen a set of basic knives for regular kitchen use, a DIY kit might be a better investment.

If you are a professional chef and you are using an expensive well designed set of knives then you should consider hiring a professional as they are capable and well trained to do a perfect job. On the other hand, if you just need to sharpen a set of basic knives for regular kitchen use, a DIY kit might be a better investment. what is your budget If you own a restaurant business and have the budget for professional sharpening services, go this route instead. You will find that some companies offer deals on contracts with restaurants.

If you own a restaurant business and have the budget for professional sharpening services, go this route instead. You will find that some companies offer deals on contracts with restaurants. How often do you use your knives? Think about how often you need to sharpen your knives. With daily use, the costs of hiring a professional add up quickly. On the other hand, if you don’t use your knives often, a DIY kit is the best bet for your wallet.

Think about how often you need to sharpen your knives. With daily use, the costs of hiring a professional add up quickly. On the other hand, if you don’t use your knives often, a DIY kit is the best bet for your wallet. Prefer to sharpen your knives a certain way? Some people care a lot about how their knives are sharpened; If you think you fit into this category, then investing in your own DIY kit is the best option for you.

It’s also worth considering the pros and cons of each method to determine which one works best for your budget.

Pros and cons of local sharpening services

Most communities have their share of locally owned sharpening services. Choosing local services helps the community as a whole and can make the whole process a little more personalized to your needs.

advantages

Save on Shipping Costs: Shipping items by post can be expensive; If you use local retailers, there are no additional costs for shipping.

Shipping items by post can be expensive; If you use local retailers, there are no additional costs for shipping. You control the transport: there is no risk of your knives being lost or damaged in the mail; You can control the travel conditions and make sure they get to their destination safely.

There is no risk of your knives being lost or damaged in the mail; You can control the travel conditions and make sure they get to their destination safely. Shorter processing time: If you stay local, the shipping and receiving process does not play a role in the processing time. Instead of waiting a week for your knives, most local retailers offer them back within 48 hours.

Disadvantages

Transportation: You have to bring the knives to the store and then back again when they are ready for collection. Finding time to do this can also be a challenge and a hassle.

You must take the knives to the store and then go back when they are ready for collection. Finding time to do this can also be a challenge and a hassle. Late Fees: Some companies charge late fees if you don’t pick up your knives at the scheduled time. Any fees incurred can quickly add up.

Pros and cons of online sharpening services

Like so many other services these days, online knife sharpening is becoming a popular choice, and for many reasons. Companies like Knife Aid or SK Sharpening offer the professional and reliable service of a local shop with the added convenience of being able to ship your knives.

advantages

No commuting: You don’t have to waste time taking the knives to a service location or going back to pick them up when they’re done. You can ship them and have them delivered straight to your home.

You don’t have to waste time taking the knives to a service location or picking them up again when they’re done. You can ship them and have them delivered straight to your home. Easy Shipping: Shipping your knives is easy with pre-labeled shipping packages sent to you. Some sharpening companies offer ready-made packages to make getting your knives to them and home as safe as possible.

Shipping your knives is easy with pre-labeled shipping packages sent to you. Some sharpening companies offer ready-made packages to make getting your knives to them and home as safe as possible. Subscribe and save: Some online businesses offer subscription options to their customers and set up pre-scheduled services a few times a year. This service offers a small discount for early signing of a service contract.

Disadvantages

Shipping costs: The shipping costs depend on the weight of the package. Shipping a large set of knives can be expensive.

The shipping costs depend on the weight of the package. Shipping a large set of knives can be expensive. Longer waiting time: Due to shipping and receiving, this way you will wait much longer for your knives to be returned than if you were there.

Due to shipping and receiving this way you will wait much longer to get your knives back than if you went locally. Problems with the mail: If you take your knives to a professional in the mail, you risk losing or damaging them along the way.

If you take your knives to a professional in the mail, you risk losing or damaging them along the way. Customer Service: Contacting online businesses can sometimes be more complicated than contacting local businesses. You don’t have the opportunity to go there to ask questions directly.

Pros and cons of homemade sharpening

Families have been sharpening their own knives for generations. This form of sharpening gives you the ability to control every step of the process and ensure your blades are sharpened the way you want them to be. Although the labor involved may be more, you can save a lot of money and stress by buying your own knife sharpening kit.

advantages

Always at hand: When you buy a DIY set, you always have the sharpener with you when you need it.

When you buy a DIY kit, you’ll have the sharpener whenever you need it. You are in control of the product: when you sharpen your own blades, you can decide which item is used to sharpen them. You can choose the right stone or another sharpening product for each individual knife.

When sharpening your own blades, you can decide which object to use for sharpening. You can choose the right stone or another sharpening product for each individual knife. No Shipping Costs: You don’t have to worry about sending your knives in the mail and paying the postage.

You don’t have to worry about sending your knives in the mail and paying the postage. No service fees: You do all the work yourself. You never have to worry about paying service fees to others.

You do all the work yourself. You never have to worry about paying service fees to others. No Drop or Pickup: Save time walking back and forth to the store; You can sharpen your knives in the comfort of your own home.

Disadvantages

Time-consuming: Sharpening can take anywhere from 10 to 15 minutes per knife. Working on multiple blades each time can take you all night, especially if you’re inexperienced.

Sharpening can take anywhere from 10 to 15 minutes per knife. Working on multiple blades each time can take you all night, especially if you’re inexperienced. Technique: Sharpening knives is not an easy task; You must know what you are doing or you risk ruining your knife. You also need to do some research to make sure you’re using the right sharpening products for your blades.

Sharpening knives is no easy task; You must know what you are doing or you risk ruining your knife. You also need to do some research to make sure you’re using the right sharpening products for your blades. No Guarantee: If you break your knife while sharpening, you will have to pay for the repair or replacement.

If you break your knife while sharpening, you will have to pay to have it repaired or replaced. Sharpen more often: Since you’re using a home kit that probably isn’t as sophisticated as what the pros use, you probably won’t get the same results. This means you have to sharpen your blades more often.

Final Thoughts

The cost of sharpening your knives can vary wildly depending on the type, how many you have and how you have it done, from as little as $50 for your own sharpener to a few hundred dollars for professional services. In other words, how much you spend on sharpening your knives ultimately comes down to preference and budget.

However, if you’re looking for more bang for your buck, we recommend the old stone and block method. You’ll spend a lot less money buying these kits and still be able to create the smoothest, sharpest edges you need. If you just need regular touch-ups without learning complicated sharpening techniques, consider the $11.95 SmarterEdge knife sharpener.

Aside from the cost, doing it yourself will also remove the stress of the professional service options available. There are no mail-in complications like lost packages, longer wait times, limited business hours issues or poor quality service.

Chef’s Vision is an Amazon Associate and earns from qualifying purchases.

You probably sharpen your kitchen knives regularly, but when was the last time you bothered to sharpen your scissors? Probably never. Too bad, because sharp scissors cut quickly and cleanly, and bringing dull scissors back to razor sharpness is no more difficult than sharpening knives.

Now you can buy sharpeners specifically designed for sharpening scissors, but here are four other ways to sharpen scissors using tools and materials you probably already own.

⚠️If using any of the first two techniques below, it’s best to unscrew the scissors and sharpen each blade individually. When the blades are riveted together, you’ll be sure to keep a blade out of the way while sharpening.

Option #1: Use a whetstone

A whetstone, sometimes called a bench stone or whetstone, is the simplest and most traditional way to sharpen scissors. The stone has two sides: typically . Always start sharpening on the coarse side of the stone.

Begin by wetting the surface of the stone with either honing oil or plain water. Then lay the inside of the scissor blade flat on the stone. Applying gentle downward pressure, draw the blade down the length of the stone, from base to tip. Depending on the bluntness of the blade, 10 to 20 strokes are usually sufficient.

What you need to sharpen your scissors

Next, use a permanent marker to draw a black line along the beveled cutting edge of the blade. The line serves as a visual guide and shows when the entire edge has been sharpened. Place the blade on the stone and adjust it so the beveled edge lies flat on the stone.

While maintaining this angle, draw the blade across the stone five or six times. Stop and check the black ink line to make sure you’re holding the blade at the right angle. Keep sharpening until the black line of ink is gone and the entire edge is shiny, indicating the blade is sharp.

This content will be imported from {embed-name}. You may find the same content in a different format or more information on their website.

After sharpening, check for burrs along the inside edge of the blades. Remove the burr by laying the inside edge of the blade flat on the stone and then drawing very lightly across the stone.

Now turn the stone over, wet the surface, and sharpen the blade’s edge to super sharpness by sweeping the beveled edge across the fine-grained side of the stone. Here, too, 10 to 20 strokes are sufficient.

Repeat the steps above to sharpen and sharpen the other scissor blade.

Option 2: Use a rotation tool

A portable rotary tool, often referred to as a , is an extremely versatile power tool that can accommodate a variety of attachments, including rotary whetstones ideal for sharpening scissors.

⚠️ Always wear safety glasses when using a rotary tool.

Begin by clamping the scissor blade firmly in a vise, beveled edge up. Next, insert one into the rotary tool and tighten the collet nut. Hold the tool firmly with both hands, turn on the motor and place the sharpening stone very lightly against the beveled edge.

Now – and this is important – keep the stone at the same angle as the beveled edge and keep the stone moving at all times. If you stop in one spot for even a second, you’re grinding a hollow in the blade.

Using very little pressure, pass the rotating stone over the beveled edge from base to tip eight to ten times. If you feel burrs on the flat side of the blade, grind them down with the stone.

Repeat the above steps to sharpen the second scissor blade.

Option #3: Cut sandpaper

If the scissors are very dull or damaged, the two sharpening methods described above are required. However, if your scissors still work but cut roughly, try this trick: take a blade and fold it in half so the sharpening surfaces are facing out. Now cut the sandpaper into narrow strips with the scissors. Be sure to make full cuts to expose the entire edge of the blades to the sandpaper.

The abrasive particles on the surface of the sandpaper act like tiny whetstones, sharpening the cutting edge of both blades at the same time. Wipe the blades clean with a cloth or paper towel to remove abrasive grit. Test the scissors by making several cuts in scrap paper. If necessary, repeat the process.

Option #4: Cut aluminum foil

This technique is similar to cutting sandpaper, except you use aluminum foil. Again, this will easily sharpen dull scissors, but will not sharpen scissors with very dull or damaged blades. Start by tearing off a piece of foil about 30 cm long. Then fold the foil several times until it is at least six layers thick.

Now cut the package of foil with scissors into 10 or 12 strips. Test the sharpness of the scissors by cutting off some old paper. If necessary, cut several more strips of foil until the scissors cut quickly and cleanly.

Finally, wipe the blades clean to remove any tiny bits of aluminum.

🎥 Watch now:

Joseph Truini Joe is a former carpenter and carpenter who writes extensively on remodeling, woodworking and tooling techniques.

This content is created and maintained by a third party and imported to this page to help users provide their email addresses. You may find more information about this and similar content on piano.io

Scissors in the art room can quickly become dull when so many students are sharing them and cutting who-knows-what! However, sharpening your inexpensive classroom scissors is easy and can breathe new life into dull scissors that you might otherwise just throw out and replace. And the best part is, you probably already have everything you need to do it!

1. Plain aluminum foil is great for cleaning scissors, straightening and aligning blades, and smoothing small amounts of rust and rough edges. Here’s everything that goes with it:

Tear off about 12 inches of foil and fold it in half three or four times. (If you’re using heavy foil, it doesn’t need to be quite as thick.) Then simply use long scissor strokes to cut your foil into strips. Finally, do the same with a piece of wax paper to lubricate the blades. (I’ve heard you can also sharpen punches this way, although it’s never worked well for me. Maybe mine were just too far off!)

2. You can also sharpen your scissors by cutting through a piece of fine grit sandpaper. This might be a little trickier for your scissors, but it really works! Cutting a piece of steel wool has a similar effect and is great for removing rust.

3. Another method is to run the blades of your scissors against the edges of a safety pin. Using a reverse cutting motion, start with the pin at the tip of your scissors and pull it back toward you as the scissors open. (You can also use a regular pin, but I find a safety pin is a bit easier to carry in my pocket!)

Repeated sharpening using these techniques can eventually wear down the steel of your scissor blades, but it’s worth considering whether the alternative is to buy newer ones. Letting your old scissors last a little longer and making better use of them is the greener and more economical way!

But read on to learn the best way to sharpen your scissors…

4. Finally, the Smith 10 Second Knife & Scissor Sharpener is a great investment (for very little money). For less than $10, you can sharpen both left- and right-handed scissors quickly and easily, and it’s so easy to use, your students will want to do it for you! You can also use this sharpener at home to sharpen your knives and use your X-acto blades even longer. Check out all the great reviews for this sharpener on Amazon! (Note: This is an affiliate link and not a sponsored post. I have not received any payment or free products to promote this sharpener. I am sharing it because I love it and I think you will too!)

Of course, it goes without saying that any really expensive, high-quality scissors should be sharpened by a professional or through the skillful use of a sharpening stone or wheel to preserve the integrity and original angle of the edges. But most classroom scissors (like mine!) are probably not worthy of that care!

Do you sharpen your scissors or just replace them when they become dull?

Please share!

0 shared pin

Split

tweet

Why bother sharpening dull scissors when they’re so cheap you can just buy a new pair? Because sharpening is easy to do yourself and saves money. You can sharpen the scissors using items you already have at home such as: B. a knife sharpener.

You can use a scissors knife sharpener as it is designed for different types of blades. However, it is better to use a special scissor sharpener, as it is specially designed for this purpose. A scissor sharpener will hold both blades securely and sharpen them at the same time.

For those curious about sharpening scissors, we discuss the pros and cons of knife and scissor sharpeners, as well as alternative tools.

Sharpening scissors with knife sharpeners

Instead of spending a lot of time and effort manually sharpening scissors with a stone, you can use a scissor sharpener, which makes the process nearly foolproof.

We recommend a multipurpose sharpener such as the Smith JIFF-S 10 Second Knife & Scissor Sharpener. Fast, safe and easy to use, it sharpens left-handed scissors on one side and right-handed scissors on the other. Its carbide blades are reversible and interchangeable. The preset sharpening angle guarantees results. It has two steps and two slots: one for sharpening the scissors and one for rough grinding.

The next tier is Smith’s 50185 Jiffy-Pro Handheld Sharpener, which has three tiers and three slots. The third is for ultra-fine grinding.

Luna Regina, the founder of Healthy Kitchen 101, recommends the Grocery Art lightweight 3-in-1 electric tool sharpener. This two-stage, multi-angle sharpening set has features superior to many more expensive alternatives. It is battery operated and electric with retractable cord.

It has four slots for sharpening scissors, screwdrivers and knives – a feature rarely found on other hand sharpeners. It provides a sharp blade after just a few hits.

How do you properly sharpen scissors?

This depends on which method you use. In general, it’s best to disassemble the scissors first and then sharpen each blade individually. Use a screwdriver to take out the screw. When the blades are riveted together, you’ll be sure to keep a blade out of the way while sharpening.

Loh Yiren, knife sharpener at The Polished Edge, says there are a few ways to sharpen scissors, but the general principle is the same. Each scissor blade has two sides: the inner flat side and the outer beveled side. Separate the blades. Sharpen the beveled side heel to the tip until a burr* forms on the inside of the blade. This is a sign that the blade has been sharpened.

Be consistent with your sharpening moves. Then remove the burr. Wipe the blades clean. Put the scissors back together.

If you’re using a scissor sharpener like the Wamery 4-Step Kitchen Knife & Scissor Sharpener, open the scissors and insert both blades into the slot. Gently press five to seven times. Test the freshly sharpened scissors on a piece of paper. Repeat if necessary.

If you’re using a manual sharpener, Police Capt. Bill McMahan suggests opening the scissors and putting tape on the side you’re not sharpening. (Others use a sharpie to mark the side to be sharpened.) Run the scissors on the sharpener like you would a regular knife. Once the burr forms on a blade, stop. Repeat the process with the other blade.

Various tools for sharpening scissors

Scissors are just two knives connected at a pivot point. So, with these tools you can sharpen scissors like kitchen knives:

Sandpaper – the easiest way to sharpen scissors that really works. It also smoothes out dents and nicks on the blades. Use a single #240 grit and then a #400. The higher the grit number, the finer the grit.

First fold the sandpaper so that both sanding sides are visible. Using the scissors that need to be sharpened, cut the sandpaper into narrow strips about 10 to 20 times. Use the coarser sheet first. Wipe off the remaining pieces of sandpaper on the blades with a damp paper towel.

Whetstone (also called whetstone or benchstone) – any good quality two-sided stone will do. You can also buy one from Amazon, like the Lansky Puck dual-grit multi-purpose blade and tool sharpener. I own one myself, it’s great for my survival axe. Its compact size and user-friendly shape make sharpening a breeze.

If your scissors are very dull, start with the coarse side and then move on to the finer side. If you only need fine adjustment, only use the finer side. To remove the burrs left after sharpening, open and close the scissors a few times. Then use it to cut fabric, paper or cardboard, making sure the rest is knocked off by the blades.

Rods or round files – more convenient to use due to their portability and because you can “squeeze” scissors around them.

– handier to use due to their portability and because you can “squeeze” scissors around them. Electric sharpener – only use if it has a setting or guide for scissors.

—Only use where there is an adjustment or guide for scissors. Glass Mason Jar – A wide-mouth jar used for preserving food. If you don’t have one, use a wide-mouth jar instead. Open the scissors fully, positioning the blades around the sides of the jar. The glass should go between the two blades as far as possible. Squeeze the scissors. Slide the jar out between the blades while closing the scissors with light pressure. Have the glass sharpened for you.

Repeat this process until the blades have a smooth, clean edge. Use a damp paper towel to wipe glass particles off the blades.

Sharpening sets and pre-angled sharpeners – do the thinking for you. The basic ones are the ones you slide the blades through. The correct way to do this is to apply pressure as if you are cutting and then pull the blades out.

Other alternatives:

sewing needle

file

emery cloth

bench grinder

Various fixed angle tools

A flat tile

steel wool

A pane of glass

Can any of these methods or materials ruin a pair of scissors? Yes, if made or used incorrectly. If this is a problem, have your scissors professionally sharpened.

What is the best angle to sharpen scissors?

Channel expert Cutlery Lover claims not to worry too much about the angle and just follow the edge of the blade. If you’re using a sharpening stone, turn the blade towards it until it hits the edge. That’s exactly the angle you need. When using a rod, the edge of the blade must lie flat against the rod. Follow the angle already on your scissors.

The aforementioned JIFF-S has a ceramic rod that levitates between the blades. It automatically adjusts to the correct angle when scissor blades are pulled or pushed through the opening. It’s important to gently squeeze the scissor handles together as you would lightly cut a piece of paper. Maintain constant pressure. All you need is a few passes for a pair of sharp scissors.

Does cutting aluminum foil really sharpen the scissors?

Yes, according to WikiHow. Use 8-10 inches of aluminum foil. Fold it lengthwise several times until you have a thick folded strip. The foil layers sharpen the blades with every cut.

Use your scissors to cut ribbons from the strip to the fullest until you’re done. Cut from the base of the scissors to the tip. The resulting sharpness of the scissor blades depends on how you cut the ribbons: many thin strands or a few thicker ones. Wipe off the foil residue on the blades with a paper towel dampened with warm water.

The exception to the rule

The above information does not apply to expensive, high-quality cosmetic or grooming scissors. Hair scissors should be sharpened by professionals either by hand or with a suitable machine. The wrong technique or equipment can destroy this type of scissors.

Professional knife designer, thrower and sharpener Thomas Stuckey explains that cleaning shears can be easily damaged if care is not taken due to their small size and the hardness of the metal. Also, hair clippers have a rounded convex edge that is not chiseled. Cosmetic scissors should be sharpened at a certain angle to cut through hair. Only a professional can depict this angle perfectly.

Conclusion

Generally, if you prefer a more refined finish, get the job done faster, or want to simplify the scissor sharpening process, use specialty equipment. This is mandatory for certain edges or work that is too risky or time consuming. However, on a regular day, all you need is a good knife or scissor sharpener, or any of the above household items to use as tools for the same purpose. Just don’t get too obsessive and don’t do it too much. They don’t have to be that sharp to work well.

We hope the above suggestions pave the way for a long and happy life for your scissors.

_____________________________________

* A burr is a burr or rough edge on a metallic object left by a machine or tool.

Hey, I’m Jim and I’m the author of this website. I’ve always been interested in survival, fishing, camping and all things natural. When I was growing up, I actually spent more time on the water than on land! I’m also a best-selling author and have degrees in history, anthropology and music. I hope you find value in the articles on this site. Feel free to contact me if you have any questions or input!

Please share!

Leading Edge Sharpening specializes in all types of sharpening for professional groomers, groomers, industrial, cooks, hobbyists and home use. If you need scissor or blade sharpening services, blade sharpening or lawnmower blade sharpening, please see the list according to your industry or needs. If you don’t see your tool or item on the list, let us know!

We also offer spare parts and repair services for pet dryers and hair clippers.

There’s no denying that professional hairdressers need professional tools – especially since it’s not just about their client’s hair, but also their reputation. After all, people love to talk about good experiences, but they just LOVE to share bad ones.

However, if you have looked through professional hairdressing scissors before then you must have realized that most are quite expensive – some of them costing several thousand. While it may not really come as a surprise to anyone who has been in the industry for years, it doesn’t mean it doesn’t raise questions like “why are hair shears so expensive?”.

There are a few reasons hair clippers cost so much, some of which we’ve listed below. So if you want to find out why the best hairdressing scissors are often also the most expensive, just read on.

Made from better materials

This is probably the number one reason professional scissors cost more than regular ones. Expensive scissors are made from higher-quality materials, such as Japanese stainless steel, which is often considered the best material for professional scissors in the world.

Depending on the origin of your scissors – whether German, Japanese, French, etc. – the brands use different types of steel.

For example, here are the types of steel that Japanese brands commonly use, ranked from highest quality (level 6) to standard quality (levels 1 and 2):

Hitachi ATS 314 – Stage 6

Hitachi 440c – Stage 5

V10 (VG10) – Level 4

V1 (VG1) – Level 3

440C – Stage 2

440A – Stage 1

Sometimes manufacturers will advertise a product that is made from the highest quality materials but make sure it costs less than $50. The truth is that professional hairdressing tools, especially those made from such good material as Japanese steel, for example, will not come at such a low price. It just wouldn’t be profitable for the company that makes them.

Professional scissors are designed to last a few years at least, so it should come as no surprise that their condition matters a lot. If the scissors are properly cared for, they can sometimes even last for decades.

It’s also important to note that some of the scissors you see on professional hairdressing websites like Scissor Tech contain Swarovski crystals, which, let’s be honest, aren’t the cheapest either. It’s also one of the reasons why some pairs are more expensive than others – the procedures need to recoup the money they spend on details like these crystals.

Made for professionals

It’s important to remember that salon shears are not made for home use. They are a tool for hairdressers that they need to perform at their best. Sure, you can use them at home if you really want to, but the truth is that if they’re only used a couple of times a year, it might not be worth it.

On the other hand, professional barbers use theirs at least a couple of times DAILY. Understanding why professionals don’t mind spending a few hundred (or thousands) on a pair of barber scissors is actually quite simple and involves a lot of basic math. The easiest way to say it is that they can afford it since it’s their tool of the trade.

Let’s say an independent hairdresser bought a pair of scissors that he will use every day for $2,000. They charge $30 a haircut. In a day they perform an average of 5 such haircuts. They work 5 days a week which means they can make $750 in that one week. Assuming they save $200 each week to later reinvest in their business, they can recoup the amount they paid for their scissors in 10 weeks. That is if they only do haircuts, but most barbers, whether they are self-employed or work in a salon, do a lot more, which means it doesn’t take 10 weeks – maybe around 5 or 6 weeks.

Serve different purposes

Cheap hair scissors are usually not adapted to certain hair types, which can be very harmful, especially with sensitive hair. Professional tools, on the other hand, come in a variety of shapes, all suited to different types of haircuts.

Take scissors used for thinning hair as an example. Use different scissors depending on how thick the hair is and how much of it you want to thin out. If you are dealing with hair that is not too thick, you can opt for regular thinning scissors as they will do the job well. On the other hand, if your client’s hair is thick or curly, it’s best to use wide-toothed thinning scissors.

more customizable

One of the great things about professional hair clippers is that they are meant to fit you and your preferences – not the other way around. That’s exactly why there are so many items to choose from.

First of all, the handle design. There are a few types of grips on the market, but the classic and offset grips seem to be the most popular choices. Which one is right for you depends mainly on how you hold your scissors.

Another thing you can “personalize” is the blade. Do you want your hairdressing scissors to have a beveled or a convex edge? There are a few things that can influence your choice, but in general, convex edges are more recommended for experienced barbers, as they won’t have as much trouble controlling them as a beginner would.

Next we have the option to choose between right and left handed scissors. When it comes to regular scissors, there is no such choice – it’s not a big deal as left-handed people sooner or later get used to using right-handed scissors. However, when it comes to cutting hair and being a barber, it is crucial that the hair scissors are comfortable for you to grip as it can be a matter of life and death (maybe not literally but you get what we mean ). It’s about giving your client sharp cuts.

Something that may be less important to some, but still appreciated by many, is the ability to choose the color of your scissors. In most cases regular scissors are only available in silver – if you are lucky you might find them in black. But that’s all. Professional scissors, on the other hand, come in a variety of colors. If you decide to shop on our site, you will find that we offer pink, rainbow, rose gold, silver and matte black scissors.

Last but not least, scissors may or may not have the finger rest. Many of the expensive scissors have a removable finger rest, as some hairdressers prefer to work without. If you change your mind one day, you don’t have to buy a whole new set of scissors, you can simply screw the finger rest back on. Many hairdressers swear by it, because a finger rest ensures that work is as comfortable and pain-free as possible.

Longer Guarantee

In most cases, companies that offer expensive premium scissors offer a much longer warranty than retailers that offer regular hair scissors. It is actually very practical for them, because the guarantee usually remains unused, but the customer still has the certainty that a manufacturer stands behind his product.

Here at Scissor Tech we offer our customers a lifetime guarantee because we know how important it is to be able to rely on the company you bought them from to help if something happens to your hair clippers and you Don’t end up throwing your money down the drain.

name recognition

While all of the above things have a bearing on why premium hair clippers cost so much, brand is also one of the factors that influence this.

Just think about it – there are many brands that are more expensive because they are that particular brand. And it’s not just that, for example, a famous person is promoting them, as is often the case, but because the products they offer are frankly so good that people just don’t mind, so much for to pay something from them.

Take Joewell or Matsui as an example — both of these companies are on the expensive side, but people still buy them, love them, and buy them again. Why? Well, there are many reasons. They’re made from Japanese stainless steel, one of the finest materials on earth, they’re aesthetically pleasing, they have sharp blades, and they’re crafted with precision that many may be envious of. While it is not easy to make such an investment, you can rest assured that if you buy something from these companies, it will last you for a very long time.

The final result

When it comes to hair management, having the right tools is paramount. For example, if your scissors aren’t sharp enough, they could damage your client’s hair, which is probably the last thing you want.

If you, as someone who is not in the hairdressing industry on a daily basis, have ever googled what a pair of hair clipping scissors cost, then you were probably surprised at how much a pair of barber or hairdressing scissors actually costs. Having said that, it must be said that barber scissors can be expensive, but not without reason.

First, they are made of better materials than regular scissors, such as B. Japanese steel. They are also, as the name suggests, for professional use, meaning they are not aimed at anyone who is not a member of the industry. In addition, various types of scissors are available so that every hair type of the customer can be easily cared for.

Professional scissors are also more customizable as you can choose what type of handle design or blade you want.

Here at Scissor Tech we offer a variety of durable professional grade scissors, all from reputable and established brands that craft their tools from the finest materials including Japanese steel. And if you’re not quite ready to dive into pro-level tools, we also offer kits that are perfect for trainees or just anyone who wants to grind their teeth into hairdressing and haircutting.

If you have any questions about our products, do not hesitate to contact us! We will be happy to help you choose the best match and solve any doubts you may have. Thank you for choosing Scissor Tech!

One of the most common questions we get asked about hairdressing scissors in Australia is “why are they so expensive?” and that’s a really good question.

If you’ve been using barber scissors for as long as I have, stop thinking about the price as you can see that a good pair will last 5 to 10 years and cut almost every day.

The reason hair clippers and thinning scissors are so expensive is due to the higher quality materials and craftsmanship that go into making professional quality scissors. Professional hairdressing scissors are more expensive due to their high quality steel, sharper blades and professional quality guarantees.

The reason hairdressing scissors are so expensive is because they use high quality materials such as:

Hairdressing scissors designed for professionals with high quality craftsmanship and the best materials available

These professional tools are designed for everyday pruning and will last five, ten or twenty years

The expensive quality steel used to make hairdressing scissors keeps the blades sharper longer, and is resistant to corrosion, rust, and physical damage

Professional ergonomics, such as An offset or crane design, for example, allows for a more comfortable grip that reduces fatigue, allowing barbers to trim while standing for five or ten hours

The tension adjustment screws and gears are uniquely designed to hold the pair tight even after 5,000 haircuts

So when we ask “why are hairdressing scissors so expensive compared to Kmart or Priceline scissors?” we know that they are as sharp as your last haircut every day and will last for many years to come.

So if you are looking for the reason why the prices of regular scissors and hairdressing scissors are so different, then now you know that the expensive price means quality.

The old adage “you get what you pay for” applies to many things, but hair scissors are an exception. What you’re looking for in a quality pair of hair clippers has far more to do with their construction than their price, and you should also consider the cost of sharpening. If expensive $200 pair of hair scissors will do an extra 100 haircuts but can’t be easily sharpened and therefore need to be replaced, it’s not a good investment. So what do you look for in a quality pair of scissors, and should you have to pay an arm and a leg for them? Not at all. A good set of hair scissors, with proper care, should last up to 400-500 haircuts before needing to be sharpened or replaced. Since your average haircut costs anywhere from $10 (for men) to $100 (for women) and beyond, that’s a pretty big return. There is no reason to spend extra money on expensive hair scissors and limit those gains. High-quality hair clippers simply last longer. Stainless steel hair scissors will last much longer than lower quality materials as they do not rust easily and will keep their cutting edge for many more haircuts. There are tons of stainless steel hair clippers for anywhere in the $40 price range; Simply paying more is not worth the investment. Another factor to consider is the price of shear sharpening. A good scissor sharpener costs between $15 and $30 plus about $10 for shipping, with the higher price range being reserved for scissors with convex edges. Beveled edge will save you quite a bit of money if you intend to keep using the same hair scissors. However, if you find a quality stainless steel hair scissors you like, in the $35-$60 range, it might be a better idea to completely replace your scissors. That’s a cost decision you wouldn’t even consider with a $200 pair of scissors – but with inexpensive, good quality scissors, you can get a new pair without waiting for the scissors to be sharpened. For both home users and professional hairdressers in beauty salons, hair scissors do not work by themselves. No matter how expensive those hair clippers you have been looking at, they will not cut hair for you and will not give you a better cut quality. What you are looking for in expensive scissors is simply a measure of their quality so you can cut hair more easily and without prolonged sharpening. Stainless steel scissors with beveled edges are the best choice for quality hairdressing scissors because they last the longest and are the least expensive to resharpen. If you’d like to see some examples of beveled edge hair clippers that, with proper care, will last up to 500 cuts without breaking the $60 budget limit, try our store at www.theshearsdepot.com. Julie N Sullivan – August 10, 2009