Sliding Screen Door Side Channel? Top 99 Best Answers

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies. However, you can visit the cookie settings to give controlled consent.

Sliding glass doors typically have 2 to 4 panels. Like anything mechanical, the parts that help these heavy doors slide require maintenance, will wear out or break with prolonged use or time. Rollers located under the sliding door in the frame tend to wear out, making the slider difficult to open. The most common solution for homeowners is to simply lubricate the roller or track as much as possible. This may or may not be a temporary solution. With wear and tear and performance degradation occurring over time, you really don’t realize how bad the problem is. It’s like living at the airport, living there long enough, you don’t hear the planes at all.

As soon as one part of the door mechanism starts to move, others will move quickly as well. Glass doors are fragile and very heavy, and repairs to sliding doors must be carried out with reasonable caution and skill.

Common problems with sliding doors:

1. Bottom rollers are worn out.

2 Track on bottom of sliding door is worn, punctured, damaged, or misaligned.

3. Heavy accumulation of dirt and hair on the rollers.

4.Sliding door hardware is under-lubricated and/or the wrong lubricant is used.

5. The head can sag.

Pro Sliding Glass Door Repair has technicians who can fix these common problems for less than you think. Each repair is a little different as there are so many different types of doors, rollers, tracks and fittings, each with their own problems. We can give you an estimate for your repair and schedule insured technicians to quickly get your doors back to near-new condition.

While we’re on site, you may also consider upgrading your door with:

1. Improved double bolt locking system

2. New handle to make opening and closing your new door even easier

One phone call does it all. Call Pro Sliding Glass Door Repair today at (941) 928-2263.

Few things are more annoying than a door that makes noise and constantly jams. By lubricating your sliding doors from time to time, you ensure that they open and close easily, safely and smoothly. To help you with that, I’ve compiled a list of the best lubricants for sliding glass doors and windows. But before I get into that, let’s see what actually causes them to start working incorrectly.

What to look for when buying door lubricants

Can withstand extreme temperatures

Since sliding glass doors are most commonly installed to connect the inside of your home with the outside, a lubricant should be able to keep up. Some products can withstand up to 350° Fahrenheit, making them ideal for those living in warmer states. On the other hand, if you live in a cold climate, you want to make sure the product doesn’t freeze as soon as you apply it.

Silicone based

Lubricating oils are often thicker than other products and dirt and dust stick to them more easily. On the other hand, silicone-based lubes are long-lasting and don’t need to be constantly reapplied. As I only want to include the very best door and window lubricants, I will only list silicone based products.

non-toxic

Some substances that these lubricants contain can be harmful to you, your children, and pets. Even though these harmful chemicals sometimes give the product a longer lifespan, you must use them with caution. This isn’t a deal-breaker, however, as products with a short drying time also evaporate more quickly – making them safe to use.

Serves more than one purpose

In most cases, you don’t need to use a full can of lube to fix your problem, and if there’s any left over, you need to find a purpose for it. Sure, if you have dozens of sliding doors and windows in your home, you can empty a can in no time. However, if you don’t want to be wasteful, buy a product that works well on several different types of materials.

List of the best lubricants for sliding glass doors and windows

With poor lubrication being the number one reason for noisy windows and doors, buying the right product is crucial. Rollers need to be lubricated to keep them running smoothly at all times. Also if you apply silicone spray to the splint it will help them function properly and will not attract dirt. Now I’m going to list the best lubes and rank them by weight, starting with the lightest.

3M Silicone Spray (Dry Type) Lubricant – 5.6 oz

3M offers a high quality silicone lubricant that can work on a variety of surfaces. The product is not specifically made for sliding glass doors, which is not necessarily a bad thing. Because of this property, you can also use it for other types of doors, such as wood or PVC, and also for windows. Because it is so versatile and works in different environments, it has also found wide use in the automotive industry.

3M’s formula stays intact from -28 to 350 degrees Fahrenheit. As for warmth, it’s one of the most durable. The silicone lubricant will help you get rid of your door’s squeaky noises and prevent it from sticking and retaining moisture. A great feature of the formula is that it doesn’t contain any petroleums that can pollute your door and everything around it. In addition, it can also protect your sliding doors and windows from corrosion and rust.

Although the formula can withstand extreme temperatures, it is preferable to use it on room temperature materials. Low temperatures can reduce the pressure in the can and high temperatures can increase it significantly. It is best to apply it evenly to the rails of your door and let it work for a few minutes.

Another great feature is that it comes with an extension tube that can reach most places on the door and window rails. Many products require you to twist and turn to find the right angle, but 3M makes it a lot easier.

Features:

Withstands extreme temperatures

Includes extension tube

multipurpose

Protects against corrosion and rust

>>> Check the price on Amazon <<< Why The Frog Sliding Door Lubricant - 8.6 oz Why The Frog Lubricant allows you to get your doors working properly with just a few sprays. It is specially designed for sliding glass doors of all shapes and sizes. In addition, it can withstand temperatures from -35 to 180 degrees Fahrenheit, protecting your door all year round. It also contains rust inhibitors to preserve the appearance of your sliding door and add years to its life. Its mineral base means it's non-toxic and safe to use around pets and children, and you don't need to wear gloves when using it. It also contains no volatile organic compounds (VOCs) and is good for the environment. One of my favorite features is that it's odorless, almost odorless, so the fumes won't give you a headache. It features a silicone-based formula that helps keep your sliding glass doors smooth for a long time. The dry lubricant also works well on plastic as it will not stick to or damage it. Application is pretty simple, all you have to do is spray it on each wheel and track to lubricate them. After applying, be sure to slide the door back and forth a few times to distribute the lube properly. Features: anti rust Withstands extreme temperatures Environmentally friendly non-toxic Unscented >>> Check the price on Amazon <<< 3-IN-ONE Professional Garage Door Lubricant - 11 oz This product is considered by many people to be one of the best sliding glass door lubricants, so I decided to give it a try. Although it's marketed for garage doors, I've tried it on regular patio glass doors and windows - and it worked like a charm. The smart straw system includes 2 sprays so you can apply as little pressure as you like. In addition, you can easily get into the nooks and crannies of every sliding door. Because it is silicone based, the spray dries quickly and doesn't attract dust or dirt. One difference I've noticed (and really appreciate) is that it leaves no residue and almost no odor. It's perfect for residential and commercial windows and will not deteriorate even if your home gets a lot of foot traffic. The formula also includes ingredients that help prevent corrosion and damage from external elements. If you're having trouble with an uncomfortably noisy garage door, 3-IN-ONE's Lubricant could be the simple solution. Spray all hinges, chains and wheels and let them dry for a few minutes to prevent your doors from getting stuck and noisy. Aside from glass, you can safely use it on different types of materials like wood, metal, and plastic. The only thing you should be aware of is that it contains some toxic materials, so you should take some precautions while using it. Don't let your pets or children touch it before it has had enough time to evaporate. Features: Intelligent straw system Fast drying multipurpose Protects against corrosion and rust >>> Check the price on Amazon <<< Other causes of sticky and noisy sliding doors and how to fix them Bad alignment Sliding doors and windows move over a track that allows them to open and close. However, if these rails come loose, your door could easily come loose. If they start moving in a direction that isn't straight right-to-left, there are likely some alignment issues. What to do in case of bad alignment: Raise the door put it back You can lift the gate and carefully place it on the center of the track to get it running smoothly again. If you want to prevent your doors from having alignment problems, be sure to open and close them carefully. Slamming your sliding doors could cause them to go off track and break. Dirty tracks Since your door likely gets a lot of traffic, it can easily get dirty over time. If the rails are not clean, they will cause your sliding doors to malfunction by allowing dirt to stick to them. However, this is one of the most common reasons for sticky doors, and the fix is ​​quick and easy. What to do with dirty tracks: Vacuum the splint. Clean the splint with a vet wipe. Apply a lubricant Thoroughly clean the rails to remove dust and dirt to get your gate working properly again right away. If you want to prevent this from happening again and again, clean your doors at least once a month. You can include vacuuming and mopping the rails into your cleaning routine. Damaged rollers Sliding glass doors use rollers to move along the track. However, they can easily become dirty, damaged or broken and cause your door to malfunction. If the rollers are dirty you can try removing the gate from the tracks, cleaning the rollers and spraying them with a lubricant. What to do with damaged rollers: Remove the rollers. Clean them. Apply a lubricant You can also try readjusting them if you notice that their alignment is wrong and they are going off track. If the problem persists, the rollers are probably broken or too badly damaged and need to be replaced. Broken doors and windows Sometimes, despite your best efforts to fix something, you have to acknowledge that it's time to say goodbye. After all, doors and windows are heavily used and sometimes cannot be repaired. If you still can't open and close it properly after checking the alignment, tracking, and rollers, consider buying a new one. Lubricate your doors and windows regularly Windows and glass doors can fill your home with natural light and give you a beautiful view of the outside from your living room. In addition, they add to the visual appeal of your home, provide fresh air, and allow you to move more easily from the inside out. Because they are so important to the design and function of your home, you need to make sure they are always working properly and safely. If you lubricate your doors and windows regularly, you can use them for years and not have to constantly hear them squeaking. I hope my list of the best lubricants helps you make the best decision.

How to clean window screens without removing them

Clean windows and screens help maintain a great view and view from the inside out. Dirty or dusty screens can also look unattractive from the outside and hurt “edge appeal”. There are two basic methods of cleaning screens; on the one hand the screens are removed and on the other hand the screens are cleaned while they remain in place, or in other words without having to laboriously remove them. How to clean window screens without removing them:

1. Dust off the window grilles

The first thing you want to do is dust off the screens. This will help remove excess and debris and make further cleaning much easier. You should open the windows as wide as possible to access as much screen as possible. You may have to reach behind the window sash to dust the entire area.

Start by lowering the top sash and dusting the top half of the screen first so any loose dust or dirt falls into the undusted areas and is picked up when you dust the bottom half of the screen. The most effective way to dust the screens is to use a lint duster or microfiber cloth, which will attract and hold most of the loose dust and dirt.

You can also use a vacuum hose attachment, but be careful not to use a plastic end. If you decide to use a vacuum, attach a soft brush to the hose to avoid damaging the screens.

2. Protect the walls and floors

When it comes to cleaning window screens without removing them, protecting the interior of your home is paramount. When you’re done dusting/vacuuming the screens, you should quickly vacuum the floor area under the window and place a protective cover on the floor. Since you’ll be using liquid to clean the screens, you’ll want to make sure your painted walls and carpeted or hardwood floors are protected from any potential drips or spills.

A large towel or an old blanket is usually sufficient for this. Having a painter’s masking cloth available can be an ideal way to cover a larger area, such as that needed for large bay or arched windows.

3. Prepare buckets for cleaning and rinsing

You need to prepare two buckets; one for cleaning and one for rinsing. A mild detergent should be added to the bucket used for cleaning. A mild dish soap works great for this, but be careful not to add too much dish soap. You don’t want to create a thick lather of soap on the screen that requires excessive rinsing, so a small amount of soap gets the job done just fine. Your sink bucket only contains warm water.

4. Use a lint-free cloth to clean window screens

Dampen a soft, clean, lint-free cloth or microfiber cloth in the cleaning bucket and wring out most of the water from the cloth to avoid dripping. Use the damp cloth to gently wipe the screen, paying particular attention to spots of excessive dirt or debris. You may need to rinse your rag in your cleaning solution a few times and wipe the screens again depending on how dirty they are.

5. Use a clean rag and clean water to wipe the screens

When the screen is completely wiped, use a clean rag from the rinse bucket and wipe away any soap residue. When your rinse bucket gets dirty, empty it and fill it with fresh, clean water. Depending on how dirty your screens are, it may be a good idea to refresh your dishwashing bucket between each screen. If you see there are still dirty spots, go back to step 4 and repeat the process.

6. Allow the window screens to air dry

Once the screens are cleaned and rinsed, allow them to air dry. The screens dry quickly, but there may be some excess water in and around the window sill. You can use a dry rag to soak up most of it, but if you leave your windows open to encourage natural airflow, the screens will dry quickly.

7. Inspect the area

Before cleaning up, inspect the area to make sure there is no water on the floors, especially if you have natural hardwood floors in your home. Also, make sure there aren’t any dirty water stains or moisture on the surrounding walls that can stain the paint inside your home. Clean the area as needed and then relax!.

Leaving your screens in and cleaning them is a quick and easy process that’s well worth it, especially if you know how to clean window screens without removing them. You will love the results and your home will look and feel cleaner! If your windows are giving you trouble or still don’t look right no matter how clean they are, you may need to consider replacement windows. Call us at 717-399-4708 to talk about your current windows, see if you need to replace them, and also to get a free quote on new windows!

Storm doors are a key factor in protecting your home from the elements. But often storm doors are made with weak parts. Luckily, these parts, including the latch, hinge, and closer, are easy to repair or replace.

If your storm door isn’t working properly, try these tried and true repair tips. If the problem persists, it may be worth replacing the entire storm door with a more solid and weather resistant one.

Most repairs can be completed in about an hour. Before you begin, check the door for blockages and other obstacles that could cause problems.

How to install a storm door

What you need

screwdriver

Drill

Tongs

spare Parts

spray lubricant

Spray the latch

If your storm door is sticking or not closing properly, this is the first repair you need to make. Spray the latch and all moving parts, including where the washers slide, with lubricant. Once the door is working properly, spray the latch a few times a year to keep it in good working order.

Install the replacement closer

Normally openers lose their damping power over time. To install a replacement closer, use a drill with a screwdriver bit to attach the bracket to the jamb side and then the screws that hold the closer to the door.

Set NO contact voltage

If your door takes forever to close or slams shut, you may need to adjust the tension. This simple solution is to turn the adjustment screw on the end of the cylinder until the desired tension is achieved.

Tighten the piano hinge

If the door’s long piano hinge comes loose, try installing longer screws. You may need to drill pilot holes and drive them at an angle so they grip solid wood.

Install the wind chain

A wind chain prevents the door from opening wide, which can damage the hinge. It attaches easily with a few screws. Follow the manufacturer’s instructions for specific instructions.

Replace a corner joint

Step 1: Open the hinge

Metal storm or window sashes often come loose at the corners. Many joints just break apart; If necessary, use a spatula to open the joint. In some connections, the fasteners can be held in place with a screw. Others are held in the frame with a crimp or two that you need to drill out.

Step 2: Pry open the joint

Lever the joint open completely by turning it with a screwdriver. You may need to tap outward on the joint with a hammer to pry the corner apart.

Step 3: Find a match

Use a screwdriver to push the old corner connectors out of the frame. Take parts to a hardware store or hardware store to find matching components. Otherwise, try searching online.

Step 4: Add the replacement

Push or tap in the replacement fitting. Replace all screws. Create a crimp using a hammer and nail set.

Step 5: Slide frame onto glass

Slide the seal over the edges of the glass and gently press the frame onto the glass and seal.

Step 6: Push the frame together

Slide the frame parts together. If necessary, tap lightly with a hammer. Drive in any fastening screws.