Are you looking for an answer to the topic “sports afield safe manual“? We answer all your questions at the website Chewathai27.com/ppa in category: Aodaithanhmai.com.vn/ppa/blog. You will find the answer right below.
Table of Contents
Sports Afield SA55-30SM Safe Programming – Sams Club 30 gun
See some more details on the topic sports afield safe manual here:
SPORTS AFIELD GUN SAFE Instruction Manual – Manuals+
1. All Sports Afield Maximum Security Series gun safes come with a preset factory code of [ 1 2 3 4 5 6 # ]. 2. Press the …
Source: manuals.plus
Date Published: 9/26/2021
View: 2978
Updated 1/6/16
Installation Gue & Owner’s Manual. Congratulations on the purchase of your new Sports Afield Gun Safe! Our safes are built to the highest quality standard …
Source: a.sellpoint.net
Date Published: 5/13/2021
View: 7899
How to reset code on sports afield safe – The Dewa Koh Chang
Digital Fingerprint safe Model 96846 Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, …
Source: thedewakohchang.com
Date Published: 6/8/2022
View: 7928
2019 GUN SAFE INSTRUCTION MANUAL IMPORTANT
DO NOT LOCK THIS MANUAL OR THE OVERRIDE ACCESS KEYS IN YOUR SAFE. Thank you for choosing a Sports Afield Gun Safe to protect your valuables.
Source: docplayer.net
Date Published: 1/23/2021
View: 5089
SA Consumer Products: Secure Safes for Firearms and …
Sports Afield has a large selection of gun safes, handgun storage and the best biometric safes in the industry. Find a gun safe dealer near you!
Source: www.saproducts.com
Date Published: 10/28/2022
View: 6218
Electronic – Gun Storage – Safes – The Home Depot
Sports AfieldPreserve – 18 Gun Fire and Waterproof Safe … Electronic Gun Safe – Rifle Cabinet with Keypad, 2 Manual Overre Keys, …
Source: www.homedepot.com
Date Published: 12/20/2022
View: 3559
SPORTS AFIELD GUN SAFE Instruction Manual
GUN SAFE
GUN SAFE | OPERATION MANUAL
Please read this information and follow all safety rules carefully before using your gun safe. Failure to do so will void your warranty.
IMPORTANT INFORMATION
ATTENTION
PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR SPORTS AFIELD GUN SAFE.
DO NOT LEAVE THIS MANUAL OR ACCESS KEYS IN YOUR SAFE.
Thank you for choosing a Sports Afield Gun Safe to protect your valuables. We are committed to securing, organizing and protecting your most important documents, valuables and keepsakes.
Your gun safe is built to last a lifetime. However, please understand that the locking mechanism contains precision parts. If you have difficulty opening or closing your gun safe, DO NOT FORCE THE GUN SAFE. This can jam the components in the lock, requiring a vault technician to unlock your safe. This will cause you inconvenience and may result in the claim being rejected.
If you have any problems or challenges with your gun safe, please contact us. Many problems can be resolved quickly without having to return the product.
Customer Service – (888) 792-4264
1 REGISTRATION
Please ensure you register your new gun safe by visiting our website. Locate the Contact Us button at the top right of the home page. Select Registration from the drop down menu.
www.sportsafieldsafes.com
Registering your Sports Afield Gun Safe allows us to expedite and address any issues or challenges you may have that would otherwise require a notary letter and proof of payment.
OM_GS_0218
www.sportsafieldsafes.com
1
REGISTRATION INFORMATION
The information you collect on this page is needed in the event that you are unable to access the contents of your Sports Afield Gun Safe. Please complete all required information below and retain for your records and safekeeping. PLEASE HAVE THIS INFORMATION BEFORE CALLING TECHNICAL SUPPORT:
Customer Service – (888) 792-4264
PURCHASE DATE:
PURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
PLACE OF PURCHASE:
KEY NUMBER (IF APPLICABLE):
OM_GS_0218
www.sportsafieldsafes.com
2
SAFETY
IMPORTANT
When storing a gun, always follow the proper gun and local laws. SA Consumer Products strongly recommends that no LOADED pistols be stored in this unit.
IMPORTANT
Always follow the firearm safety procedures established by the firearm manufacturer.
IMPORTANT
The Sports Afield Gun Safe or other firearm storage devices are not a substitute for other safety practices, including educating children about the dangers of firearms.
IMPORTANT
YOUR GUN SAFE IS ONLY PART OF YOUR OVERALL SAFETY PROTECTION. SA Consumer Products recommends that you keep your gun safe in a closet, office, basement, bedroom, or any other location that is convenient to you but away from prying eyes. Gun safe location is very important and extreme care should be taken in this consideration.
A NOTICE
SA Consumer Products and its distributors of Sports Afield Gun Safes do not recommend, recommend, advise, encourage or otherwise condone the possession or use of firearms. We believe that the decision to own or use a firearm is a serious decision that should only be made by an adult who has carefully considered the risks and benefits of such a decision.
A NOTICE
Keep your combination number and keys in a safe place, away from children. Keep your combination number in a safe place separate from your gun safe. You will need this information along with your proof of purchase to obtain technical support and replacement keys.
WARNING
The gun safe and safe door are heavy. Always ensure proper installation and do not open the door with the safe on an uneven or unstable floor. Failure to do so could result in serious injury or death.
OM_GS_0218
www.sportsafieldsafes.com
3
TABLE OF CONTENTS
2 SECTIONS
IMPORTANT INFORMATION …………………………………………………………………………….1 1 REGISTRATION……………………………………… ………………………………………………….1 3 UNDERSTANDING YOUR SAFE ………………………………………………………………… . 5 4 CHECKING YOUR SAFE …………………………………………………………………………….7 5 UNPACKING ……………………………… … …………………………………………………………………………….7 6 UNDERSTANDING YOUR MODEL NUMBER ………………………………………………. .7 7 GENERAL INSTRUCTIONS FOR OPENING THE E-LOCK ………………………………………………….8 8 GENERAL INSTALLATION OF THE E-LOCK BATTERY ……………………… ………………… ………9 9 GENERAL E-LOCK SECURITY CODE SETUP……………………………………………………10 10 GENERAL E-LOCK QUIET MODE………… ………………… ………………… 11 11 ESL5 UL E-Lock Battery Installation ……………………………………………… 11 12 ESL5 UL E-LOCK opening instructions ………………………………………………..11 13 ESL5 UL E-LOCK SET UP SECURITY CODE …………………………………… ……………. .12 14 ESL5 UL E-LOCK QUIET MODE ………………………………………………………………..13 15 SANCTUARY SERIES OPENING INSTRUCTIONS …………………… … ………………….13 16 SANCTUARY SERIES E-LOCK BATTERY INSTALLATION ………………..13 17 SANCTUARY SERIES E-LOCK SECURITY CODE SETUP …………………… ……… …….14 18 SANCTUARY SERIES ELECTRIC LOCK SILENT MODE………………………………………………..14 19 SANCTUARY SERIES FACTORY RESET ………………… ………… …15 20 THEFT DETECTION SYSTEM ………………………………………………………… 15 21 REMOVING THE TRANSPORT RAIL ………………………………………………… …………………………………………………………………………………………………………………………………… …………………………………………………………………………………………………………………………………… ……………………………………………… …………………………………………. 17 23 SECURING YOUR SAFE …………………………………………………………..18 24 LOADING YOUR SAFE ………………………… ……………………………………………………………………….19 25 KEEPING SAFE DRY …………………………………………… ……………………… …………….19 26 HINGES AND INTERNAL MECHANISM ……………………………………..19 27 LOCKING SCREWS ………… …………………… …………………………………………………………20 28 CLEANING …………………………………………… …………………………… …………………… 20 29 HOW TO REACH LOST KEYS ………………………………………………… …..20 30 NOTES …………… …………………………………………………………………………………… 21 31 WARRANTY………… ……………………………… …………………………………………………….22
OM_GS_0218
www.sportsafieldsafes.com
4
STARTED
3 UNDERSTANDING YOUR SAFE
Illuminated behind E-Lock
OM_GS_0218
www.sportsafieldsafes.com
5
REFERENCE PICTURES. ACTUAL MODEL AND DESIGN MAY VARY
OM_GS_0218
www.sportsafieldsafes.com
6
4 INSPECTING YOUR SAFE
Check your safe for shipping damage as soon as you receive it. If you find any damage, please contact the delivery company (or carrier) immediately. Any damage not found upon delivery must be reported within fifteen (15) days or there will be no recourse. Any damage found at the time of delivery must be resolved with the delivery company and/or your retailer. SA Products does not guarantee damage in transit.
5 UNPACK
WARNING: RIFLES ARE HEAVY AND MAY BE UNSTABLE ON UNEVEN GROUND. PLEASE USE EXTRA CAUTION WHEN HANDLING UNSECURED SAFES.
1. Remove the packaging. If your safe is on shipping feet, you can simply lift the crate up and off the safe once the strapping has been removed. If your safe does not have shipping feet, you will need to carefully remove the box and ensure you do not damage the safe and/or injure yourself. You should have someone stabilize the safe when you remove the box and other packing material from under the safe.
2. Locate and remove the plastic bag hanging from the handle on the front of the safe. Inside you will find the necessary items needed to open your safe. Remove all items and prepare to access your safe for the first time. Congratulations!
6 UNDERSTANDING YOUR MODEL NUMBER
FOR THE SPORTS AFIELD MODELS LISTED BELOW, INCLUDING THE HAVEN, PRESERVE, TAC LZ AND JOURNEY SERIES SAFES, PLEASE READ Sections 7-10 for Safe and E-Lock opening and operating instructions.
SA5925H SA5930H SA5942h SA5520P SA5924P SA5932P
SA5932PG SA5940P SA5940PG SA7240P SA5520LZ SA6033LZ
SA5516J SA5520J SA5524J SA20 SA24 SA36
SA48 SA48GLOSS SA64 SA80 SA6040WP 3B5942H
OM_GS_0218
www.sportsafieldsafes.com
7
FOR MAXIMUM SECURITY SERIES SPORTS AFIELD SAFES, see Sections 11-14 for ESL5 UL E-Lock opening and operating instructions.
SA6028USA SA6028USAGLOSS SA6043USA SA6034USAGLOSS SA6239USA SAS6239USAGLOSS
FOR SPORTS AFIELD SANCTUARY SERIES SAFES, please see Sections 15-19 for Safe and E-Lock Opening and Operating Instructions.
SA3525S SA5936S
OPERATION OF YOUR SAFE
IMPORTANT: Depending on the model number of your safe, the initial opening instructions and battery installation process may vary slightly. Please refer to your specific instructions.
7 GENERAL INSTRUCTIONS FOR OPENING THE E-LOCK
WARNING: Never leave the override keys in your safe. You will need the override keys to open your gun safe until you have successfully programmed the electronic lock or the batteries are not replaced in time.
1. Locate the jumper keys in the plastic bag hanging from the front of the gun cabinet
2. Carefully remove the electronic keypad from the safe by twisting it counter-clockwise. The keyboard can be detached from the locking ring; Let the keyboard hang slightly under the locking ring
3. Locate the keyhole in the locking ring. Insert the key and turn it clockwise from 9 o’clock to 1 o’clock to unlock.
OM_GS_0218
www.sportsafieldsafes.com
8th
4. Locate the single spoke in the plastic bag hanging from the front of the safe and attach it to the spindle hub by turning clockwise until secure. Gently turn the handle clockwise until the locking bolts are retracted and you can open the vault door.
5. Inside your safe is a small box with the remaining spokes for a secure grip. Take the spokes out of the packaging and thread them into the corresponding holes in the spindle hub.
NOTE FOR DROP GRIP LEVER: Your grip is factory assembled and requires no action on your part.
8 GENERAL INSTALLING THE E-LOCK BATTERY
IMPORTANT: When you open your safe for the first time, you must use the override key. Once the safe is open, the batteries can be inserted. The batteries are in the plastic bag with this manual.
1. The Sports Afield Haven, Preserve, Tac LZ and Journey series e-lock requires 4 x AA alkaline batteries
2. Open the battery compartment on the inside of the door toward the top hinge
3. Insert the batteries in the correct orientation and order. 4. Close the battery compartment door. Always make sure you use new brands
Name batteries with a full charge.
NOTE: This e-lock will alert you when the batteries are low by flashing the red and green light on the keyboard when any key is pressed. Always test batteries when installing or replacing them. When the red and green lights on the lock face illuminate when a button is pressed, you know the batteries are not fully charged.
NOTE: Batteries must be inserted with correct polarity. Exhausted batteries must be removed from the product and disposed of safely. Do not mix old and new batteries. Do not mix alkaline or standard (carbon-zinc) batteries. Do not use rechargeable batteries (nickel-cadmium).
OM_GS_0218
www.sportsafieldsafes.com
9
9 GENERAL E-LOCK SECURITY CODE SETUP
IMPORTANT: It is necessary to reprogram your gun safe with a new security code that you have personally chosen to ensure maximum household security.
A security code is a series of keystrokes on the keyboard. An “enter” is a single press of a key/digit. Your security code must be between 3 and 8 digits long. Choose a security code that is easy to use but difficult to guess. A bad example would be 1-1-1-1 or 4-3-2-1-1-2-3-4.
Be careful when choosing your security code. You want to be sure that you can operate the device quickly without making an input error.
1. All Sports Afield Haven, Preserve, Tac LZ and Journey series come with a factory preset code of [ 1 5 9 # ].
2. For Haven series, you need to wake up the keyboard first by pressing any number on the keyboard. Then enter the code [ 1 5 9 # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. Open the door by turning the handle clockwise.
3. For all other models, including the Preserve, Tac LZ and Journey series, simply enter the code [ 1 5 9 # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. Open the door by turning the handle clockwise.
4. Now, with the door open, turn the handle counter-clockwise to lock and deploy the active deadbolts.
5. Next, on the inside of the safe near the battery compartment, locate the small copper cap. Unscrew and remove the cap.
6. Press and release the reset button. You hear a beep. The yellow light on the e-lock will illuminate to allow you to enter your new code. You can only enter a new code while the yellow light is on.
7. Make sure your latches are in the extended position and enter your new security code (between 3 and 8 digits).
8. Confirm your new security code by pressing the [ * ] icon. 9. DO NOT close the vault door until you have confirmed your new security code at
at least 3 times to ensure the code has been saved and you can lock and unlock the door successfully. 10. Replace the copper cap over the reset button and close the door.
IMPORTANT: If the code fails, repeat the above steps until your code is accepted. If the wrong security code is entered three times, you will be automatically locked out for 20 seconds before you can try your code again. If 3 more failed attempts are made, the keyboard will be locked for 10 minutes.
OM_GS_0218
www.sportsafieldsafes.com
10
NOTE: After entering the correct security code, you have 5 seconds to turn the handle and unlock the door before the locking mechanism reactivates.
10 GENERAL E-LOCK SLEEP MODE
1. To mute the e-lock, enter the code [ * 6 3 3 ]. 2. To turn the sound back on, enter the code [ * 6 6 ].
11 ESL5 UL E-LOCK BATTERY INSTALLATION
NOTE: The Sports Afield Maximum Security Series gun safes do not come with override keys and must be opened with the e-lock.
1. The ESL5 UL E-lock on Sports Afield Maximum Security Series safes requires a 9V alkaline battery.
2. The battery compartment is located under the keyboard. To access, rotate the keypad to the left to release the e-lock from the locking ring.
3. Snap the 9V battery into the connector in the correct orientation. 4. Reattach the keypad to the retaining ring. 5. The e-lock is ready for programming.
NOTE: This ESL5 UL E-lock is equipped to alert you of a low battery by a series of beeps (8 times). If you hear this, the battery needs to be replaced.
NOTE: The battery must be inserted with the correct polarity. Exhausted batteries must be removed from the product and disposed of safely.
12 ESL5 UL E-LOCK OPENING INSTRUCTIONS
1. All Sports Afield Maximum Security Series gun safes come with a factory preset code of [ 1 2 3 4 5 6 # ].
2. Press the [ C ] key followed by the factory preset code [ 1 2 3 4 5 6 # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on.
3. To open the door, hold the spindle hub and turn it clockwise. 4. Inside the safe, locate the spindle handles and screw them into the appropriate holes
on the spindle hub.
OM_GS_0218
www.sportsafieldsafes.com
11
13 SET ESL5 UL E-LOCK SECURITY CODE
IMPORTANT. It is necessary to reprogram your gun safe with a new security code that you have personally chosen to ensure maximum household security.
A security code is a series of keystrokes on the keyboard. An “enter” is a single press of a key/digit. You must use a 6-digit security code. Choose a security code that is easy to use but difficult to guess. A bad example of a secure code would be 1-1-1-1-1-1 or 3-2-1-1-2-3.
MAKE SURE YOUR DOOR IS OPEN
1. Locate and press the latch bar located on the door frame near the hinges. 2. With the latch bar depressed, pull out the locking pins by rotating the handle
counterclockwise 3. Press the [ C ] button and then press the [ # ] button. The ESL5 E-Lock creates a short circuit
warble tone (referred to as “good combo tone”) and the keyboard light flashes with the tone. 4. Enter the last known 6-digit code. When setting up your gun safe for the first time, enter the factory preset code [ 1 2 3 4 5 6 # ]. The [ C ] key can be used at any time to clear an input error. 5. Next, enter your new 6-digit security code followed by the [ # ] key. If the input is valid, the warble sound can be heard. 6. Re-enter your new 6-digit security code, followed by the [ # ] key to confirm. The warble tone confirms that the new security code has been successfully programmed. 7. If the code fails, you will hear four short beeps. The keyboard returns to sleep and the process begins again. Repeat the above steps until success.
IMPORTANT: DO NOT close the safe door until you have confirmed that your new security code has been entered correctly. Try your new security code at least three times to ensure the code has been saved and you can successfully lock and unlock the door.
A NOTICE. To wake up the system, press the [ C ] key before entering a code.
OM_GS_0218
www.sportsafieldsafes.com
12
14 ESL5 UL E-LOCK SILENT MODE
1. To mute the e-lock, press [ C # ] and listen for a short warble. Next, press [ 8 0 # ] and listen for a short warble. Finally, press [ 1 # ] and listen for a long warble.
2. To unmute the E-Lock, press [ C # ] and listen for a short warble. Next, press [ 8 0 # ] and listen for a short warble. Finally, press [ 0 # ] and listen for a long warble.
15 SANCTUARY SERIES OPENING INSTRUCTIONS
1. Locate the override keys in the plastic bag hanging from the front of the safe. 2. Carefully remove the e-lock from the safe by sliding the entire assembly up until
The keypad will disengage from the two mounting screws on the safe’s door. Carefully let the keyboard hang from the wires. 3. Locate the round keyhole in the safe’s door. Insert and turn the key. 4. To open the safe door, locate the single spoke in the plastic bag hanging from the front of the safe and attach it to the spindle hub by turning clockwise until secure. Gently turn the handle clockwise until the safe door opens. 5. Inside your safe is a small box with the remaining spokes for a secure grip. Take the spokes out of the packaging and thread them into the corresponding holes in the spindle hub.
16 SANCTUARY SERIES E-LOCK BATTERY INSTALLATION
1. The Sanctuary series safe e-lock requires 4 x AA alkaline batteries. Always make sure you use brand new, fully charged batteries.
2. Open the battery compartment on the back of the E-Lock. 3. Insert the batteries in the correct orientation and order. 4. Reattach the e-lock to the safe door by aligning the keyhole slots on the back
of the E-Lock with the E-Lock mounting screws and slide it down until you feel a tactile click or physical stop. 5. If the e-lock is too loose or too tight when properly installed on the safe door, the e-lock mounting screws can be adjusted by simply tightening or loosening.
NOTE: This e-lock will alert you when the batteries are low by flashing the red and amber light on the keypad when any key is pressed. Always test batteries when installing or replacing them. If the red and yellow light on the lock face illuminates when a button is pressed, you know the batteries are not fully charged.
OM_GS_0218
www.sportsafieldsafes.com
13
NOTE: Batteries must be inserted with correct polarity. Exhausted batteries must be removed from the product and disposed of safely. Do not mix old and new batteries. Do not mix alkaline or standard (carbon-zinc) batteries. Do not use rechargeable batteries (nickel-cadmium).
17 SANCTUARY SERIES E-LOCK SET UP SECURITY CODE
IMPORTANT: It is necessary to reprogram your safe with a new security code that you have personally chosen to ensure maximum household security.
BE CAREFUL WHEN SELECTING YOUR SECURITY CODE. YOU WANT TO BE SURE THAT YOU CAN OPERATE THE DEVICE QUICKLY WITHOUT MAKING AN ENTRY MISTAKE.
1. To program your new security code, press the [ 0 ] key followed by the [ * ] symbol six times. Two beeps indicate that the entry is valid.
2. Enter the factory preset code [ 1 5 9 # ]. The yellow light on the e-lock will illuminate to allow you to enter your new code. You can only enter a new code while the yellow light is on. (If you change the code, enter the last security code you used.)
3. Enter your new 3-8 digit security code followed by the [ * ] symbol. A beep indicates that the entry is valid.
4. Re-enter your new 3-8 digit security code followed by the [ * ] symbol. Two beeps indicate that the entry is valid.
5. Confirm your newly entered security code by entering the 3 to 8 digit code followed by [ # ]. If successful, you will hear two beeps and the green light will turn on.
6. DO NOT close the safe door until you have confirmed your new security code at least three times to ensure the code has been saved and you can lock and unlock the door successfully.
7. If the code fails, you will hear three beeps. Repeat the above steps until success.
IMPORTANT: If the wrong security code is entered 3 times, you will be automatically locked out for 20 seconds before you can try your code again. If 3 more failed attempts are made, the keyboard will be locked for 10 minutes.
18 SANCTUARY SERIES E-LOCK SILENT MODE
1. To mute the e-lock, enter the code [ * 6 3 3 ]. 2. To turn the sound back on, enter the code [ * 6 6 ].
OM_GS_0218
www.sportsafieldsafes.com
14
19 SANCTUARY SERIES FACTORY RESET
If you have forgotten your security code, you will need to contact the Sports Afield customer service team to retrieve your safe’s unique reset code. This code resets the safe so that a new security code can be programmed.
1. To reset to factory settings, press the [ 0 ] key followed by the [ * ] symbol six times. Two beeps indicate that the entry is valid.
2. Enter your 8-digit reset code followed by the [ # ] symbol. Two beeps indicate that the entry is valid.
3. The yellow light on the e-lock will illuminate for you to enter your new code. You can only enter a new code while the yellow light is on.
4. Enter your new 3-8 digit security code followed by the [ * ] symbol. A beep indicates that the entry is valid.
5. Re-enter your new 3-8 digit security code followed by the [ * ] symbol. Two beeps indicate that the entry is valid.
6. Confirm your newly entered security code by entering the 3 to 8 digit code followed by the [ # ] symbol. If successful, you will hear two beeps and the green light will turn on.
7. If the code fails, you will hear three beeps. Repeat the above steps until success.
20 THEFT ALERT SYSTEM
FOR THE SPORTS AFIELD MODELS LISTED BELOW, INCLUDING THE HAVEN, PSERVE,
TAC LZ, JOURNEY AND SANCTUARY SERIES SAFES
SA5925H
SA5940P
SA5524J
SA48GLOSS
SA5930H
SA5940PG
SA3525S
SA64
SA5942h
SA7240P
SA5936S
SA80
SA5520P
SA5520LZ
SA20
SA6040W
SA5924P
SA6033LZ
SA24
3B5942H
SA5932P
SA5516J
SA36
SA5932PG
SA5520J
SA48
If the anti-theft alarm system is activated, an alarm will sound for 20 seconds if the safe is tampered with. To stop the alarm from sounding, enter your security code or use the override key to open the safe and remove the batteries.
1. To activate, press [ * 0 0 ] to arm the anti-theft alarm system. 2. Each time a correct security code is entered, the alarm will be deactivated. To again-
active press [ * 0 0 ].
OM_GS_0218
www.sportsafieldsafes.com
fifteen
MOVE AND SECURE
21 REMOVE TRANSPORT RAILS
WARNING: WHEN REMOVING THE SCREWS FROM THE SKIDS, ENSURE THAT A PERSON CAN HOLD THE SAFE AND STABILIZE IT TO PREVENT IT TIPPING UP AND CAUSE INJURY AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.
WARNING: BEFORE REMOVING THE TRANSPORT RAILS, ENSURE THE DOOR IS CLOSED AND LOCKED. YOUR SAFE DOOR IS HEAVY AND PRESENTS A SECURITY HAZARD UNTIL THE SAFE IS LATCHED OR PROPERLY SECURED.
1. When you receive your safe, you may find it attached to a shipping rack. The runner is secured from the bottom of the safe with four bolts. Using a wrench or 17mm (11/16″) socket wrench, remove the four screws securing the safe to the skids.
2. Have someone stabilize the safe, carefully tip the safe to the left and pull the transport rail off the bottom of the safe on the right.
3. With the shipping rail removed from one side of the safe, carefully lower the safe to the floor.
4. Follow the same procedure to remove the remaining shipping rail.
FOR SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES (see page 8 for specific model
Counting)
1. When you receive your safe, you may find it attached to a shipping rack. The runner is secured from the inside of the safe by four tie bolts.
2. Open your gun vault door and locate and remove the four black caps on the vault floor. Use a wrench or 14mm (9/16″) socket to remove the four screws securing the safe to the skids. Reattach the four black caps.
3. Then close the door and extend the locking bolts by turning the handle counterclockwise. Make sure the door is properly latched before proceeding.
4. With assistance, slide the safe to one side of the pallet so that the safe extends over the back edge of the pallet. Carefully tip the safe over until the bottom of the safe touches the ground. Then tilt the safe a little more to allow the pallet underneath the safe to be removed.
5. Carefully lower the safe back down.
OM_GS_0218
www.sportsafieldsafes.com
16
22 TRANSPORTING YOUR SAFE
WARNING: SAFES ARE VERY HEAVY AND UNCOMPLICATED TO HANDLE. PLEASE BE EXTREMELY CAREFUL WHEN TRANSPORTING THE SAFE. THE USE OF A TRAINED PROFESSIONAL WITH THE PROPER MOVING EQUIPMENT IS STRONGLY RECOMMENDED.
Gun safe location is very important and extreme care should be taken in this consideration.
1. To maximize the fire protection of your safe, we recommend placing the safe on lower levels in your home where fire temperatures are lower and away from easily combustible materials.
2. To maximize burglary protection and stability, it is recommended that the safe be fixed to the floor.
3. To maximize household security, we recommend placing your safe in a secluded location out of the reach and sight of children.
Move the safe to the desired location using a transport cart that can support the size and weight of your safe. Please take all necessary precautions to protect your flooring and prevent damage.
HELPFUL: TO DETERMINE WHETHER YOUR SAFE CAN GET THROUGH DOORS, STAIRS OR CORNERS, TAKE THE EMPTY SAFE BOX AND CHECK THAT IT WILL FIT INTO ITS FINAL PLACE.
1. The safe should be installed next to a side panel with minimal space on either side of the safe. The safe should lie as flat as possible against the wall and floor. If necessary, remove the baseboard and/or wall paneling.
2. Proximity and location of electrical outlets should be considered when installing powered gun cabinets.
3. Always make sure the safe is in an isolated and dry area. Never place the safe in direct contact with a wet floor. When installing your safe on a concrete floor, the use of a moisture/protective barrier is highly recommended. Otherwise, or if the safe is exposed to chemicals or other adverse environments, the warranty may be void.
4. If your safe appears uneven, you may need to chock the bottom of the safe to prevent the door from swinging open too quickly or closing itself.
OM_GS_0218
www.sportsafieldsafes.com
17
23 SECURE YOUR SAFE
WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS OPENED. HOWEVER, CAUTION SHOULD BE TAKEN TO AVOID TIPPING AND SAFETY HAZARDS. THE SAFE MUST BE FIXED TO THE FLOOR. Otherwise, the security and protection of the safe will be affected.
FOR SPORTS AFIELD HAVEN, PRESEVER, TAC LZ, JOURENY & SANCTUARY SERIES SAFES (see pages 7 & 8 for specific model numbers)
TOOLS REQUIRED TO SECURELY BOLT ONTO A CONCRETE SURFACE DRILL / HAMMER DRILL 1/2″ DRILL (for installing in concrete with hardware provided) WRENCH / 11/16″ (17MM) HAMMER
1. Use the hardware provided or consult your hardware vendor for mounting hardware for your specific mounting surface.
2. Open your gun vault door and locate and remove the four black caps on the vault floor. This will give you access to the factory drilled screw holes.
3. To attach your safe to the floor, you must first drill holes in the floor surface.
4. Drill the appropriate diameter and depth of pilot holes based on the type of hardware being used and the type of floor surface. For the supplied hardware (concrete floor mounting), we recommend drilling the four appropriate holes in the concrete floor with a rotary hammer and a 1/2″ concrete drill bit.
5. Insert the plastic anchor bolts and drive them into the pilot holes. You may need to use a hammer to fully seat the plugs into the pilot holes.
6. Secure the safe by threading and tightening all 4 anchor bolts through the factory drilled screw holes in the bottom of the safe. Make sure that the metal washer sits on the rubber washer. Tighten the screw to compress the rubber washer between the safe and the metal washer. Otherwise, in the event of a flood, water may enter the safe. Journey Series safes do not include rubber washers.
7. Put the four black caps back on the safe floor.
SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES (see page 8 for specific model numbers) ship without hardware. Contact your local hardware store for mounting hardware specific to your mounting surface and location. Follow the same steps as above to adjust the drill diameter and pilot hole depth based on the fastener material selected.
OM_GS_0218
www.sportsafieldsafes.com
18
USE AND MAINTENANCE
24 LOADING YOUR SAFE
1. When loading guns into your safe, make sure they fit securely into the recesses in the gun racks to prevent accidental tipping when the door is closed.
2. Store documents or heat-sensitive items in the bottom of the safe for maximum protection against fire damage.
3. Store ammo separately from valuables. 4. Don’t put anything in your safe that puts pressure on the door when it’s open
is closed. 5. Select safe models have reinforced shelves but as a good security precaution
Store heavier items either on the vault floor or away from the center of the shelves.
25 KEEP SAFE DRY
We recommend placing a moisture/protective barrier between your safe and the concrete floor to prevent moisture, mold and rust from damaging the safe. It is highly recommended that you place your safe in a location with air conditioning (heating in winter and cooling in summer). In areas with high humidity or frequent temperature fluctuations (garages), it is advisable to take appropriate precautions to protect against moisture damage. We strongly recommend using an internal dehumidifier and/or desiccant to protect your contents from rust or mold. Indoor dehumidifiers should not make direct contact with the side or back walls.
26 HINGES AND INTERNAL MECHANISM
The hinges and the internal locking mechanism are permanently lubricated and therefore maintenance-free. Opening your safe’s door panel may void your warranty. Always contact our customer service experts beforehand.
OM_GS_0218
www.sportsafieldsafes.com
19
27 LOCKING SCREWS
Occasionally it may be necessary to lubricate the active locking pins. To do this, pull out the locking bolts completely when the door is open. Wipe a small amount of oil/lubricant around each locking pin.
28 CLEANING
Clean the surface of your safe with a soft, non-abrasive cloth (we recommend lint-free polishing cloths). DO NOT use paper towels as they could scratch, mar or damage the finish of your safe.
Water is often sufficient to clean the surface of your safe, but an ammonia-free window cleaner can also be used. DO NOT use metal polishes or solvents when cleaning.
29 HOW TO RECOVER LOST KEYS
To request replacement override keys, please contact our customer service team on the number below. Please have all registration information ready before calling.
Customer Service – (888) 792-4264
OM_GS_0218
www.sportsafieldsafes.com
20
30 NOTES
OM_GS_0218
www.sportsafieldsafes.com
21
31 WARRANTY
SA Consumer Products, Inc. will repair or replace, at its option, any Sports Afield Gun Safe damaged by fire, forced entry, violent assault or natural flooding for the life of the original owner.
SA Consumer Products, Inc. will repair or replace, at its option, any Sports Afield Gun Safe with defective parts, paint or lock for the life of the original owner.
If SA Consumer Products, Inc. determines that a replacement safe needs to be shipped, SA Consumer Products, Inc. will pay the freight cost of shipping the replacement safe to the original owner.
This lifetime warranty is limited to the safe and specifically excludes any loss related to the contents of the safe.
SA Consumer Products, Inc. reserves the right to obtain full evidence of your misfortune, such as: B. a police report and/or a letter of coverage from the homeowner. This warranty is not valid outside of the United States and Canada.
Proof of registration and a copy of the proof of purchase must be available at the time of the claim. Visit our website at www.sportsafieldsafes.com to register your safe.
The lifetime guarantee only applies to the original owner of the safe.
SA Consumer Products, Inc. will only be responsible and liable if the safe is used in accordance with the instructions in your new Sports Afield Safe Owner’s Manual.
SA Consumer Products, Inc. requires that repairs follow certain guidelines. The safe will be repaired at home if possible (parts and labor included); However, if a factory replacement is required (at the sole discretion of SA Consumer Products, Inc.), the replacement will be shipped freight prepaid, curbside.
This warranty is inclusive and supersedes all other warranties, express or implied. The warranties of merchantability and suitability for a specific purpose are expressly excluded. This warranty is limited to the safe itself and/or its value and does not cover consequential damages of any kind, including but not limited to the contents in and within the safe.
OM_GS_0218
www.sportsafieldsafes.com
22
If you have a question about your Sports Afield Gun Safe, contact the SA Customer Service Team with your registration details.
For more information please visit our website www.sportsafieldsafes.com
Thank you for purchasing a Sports Afield Gun Safe. Your gun safe is built to protect you for a lifetime. However, please understand that your gun safe contains precision parts. If you are having difficulty opening or closing your gun safe, contact the SA customer service team first. Do not force open the gun safe. This can jam the components in the lock, requiring a vault technician to unlock your safe. This will cause you inconvenience and may result in the claim being rejected.
OM-GS-0218
Documents/Resources
2019 GUN SAFE INSTRUCTION MANUAL IMPORTANT:
transcription
1 2019 GUN SAFE USER MANUAL IMPORTANT: Please read this information and follow all safety rules carefully before operating your gun safe. Failure to do so will void your warranty
2 IMPORTANT INFORMATION REGISTRATION INFORMATION ATTENTION PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR SPORTS AFIELD GUN SAFE. DO NOT LEAVE THIS MANUAL OR ACCESS KEYS IN YOUR SAFE. Thank you for choosing a Sports Afield Gun Safe to protect your valuables. We are committed to securing, organizing and protecting your most important documents, valuables and keepsakes. Your gun safe is built to last a lifetime. However, please understand that the locking mechanism contains precision parts. If you have difficulty opening or closing your gun safe, DO NOT FORCE THE GUN SAFE. This can jam the components in the lock, requiring a vault technician to unlock your safe. This will cause you inconvenience and may result in the claim being rejected. If you have any problems or challenges with your gun safe, please contact us. Many problems can be resolved quickly without having to return the product. 1 REGISTRATION Customer Service – (888) Please ensure you register your new gun safe by visiting our website. Locate the contact button at the top right of the home page. Select Registration from the drop down menu. The information you collect on this page is needed in the event that you are unable to access the contents of your Sports Afield Gun Safe. Please complete all required information below and retain for your records and safekeeping. PLEASE HAVE THIS INFORMATION AT HAND BEFORE CALLING TECHNICAL SUPPORT: DATE OF PURCHASE: Customer Service – (888) PRICE OF PURCHASE (EXCLUDING TAX): MODEL NUMBER: SERIAL NUMBER: PLACE OF PURCHASE: KEY NUMBER (IF APPLICABLE): By registering your Sports Afield Gun Safe, we will be in be able to expedite and address any issues or challenges you may have that would otherwise require a notary letter and proof of payment. 2 3
3 SAFETY IMPORTANT Always follow proper gun regulations and local laws when storing a gun. SA Consumer Products strongly recommends that no LOADED pistols be stored in this unit. IMPORTANT Always follow the gun manufacturer’s safety instructions. IMPORTANT The Sports Afield Gun Safe or other firearm storage devices are not a substitute for other safety practices, including educating children about the dangers of firearms. IMPORTANT YOUR GUN SAFE IS ONLY PART OF YOUR OVERALL SAFETY PROTECTION. SA Consumer Products recommends that you keep your gun safe in a closet, office, basement, bedroom, or any other location that is convenient to you but away from prying eyes. Gun safe location is very important and extreme care should be taken in this consideration. NOTICE SA Consumer Products and its distributors of Sports Afield Gun Safes do not endorse, recommend, advise, encourage or condone the possession or use of firearms. We believe that the decision to own or use a firearm is a serious decision that should only be made by an adult who has carefully considered the risks and benefits of such a decision. NOTICE Keep your combination number and keys in a safe place, out of the reach of children. Keep your combination number in a safe place separate from your gun safe. You will need this information along with your proof of purchase to obtain technical support and replacement keys. Table of contents 2 Sections Important Information 2 1 Registration 3 Understand your safe 6 4 Review your safe 8 5 Understand your model number 8 7 General E-Castle opening information 10 8 General e-lock battery installation 10 9 General E-Setup of the Security Codes FOR THE LOCK IN GENERAL ESL5 UL E-LOCK QUIET MODE ESL5 UL E-LOCK INSTALL BATTERY ESL5 UL E-LOCK OPENING INSTRUCTIONS ESL5 UL E-LOCK SET SECURITY CODE ESL5 UL E-LOCK QUIET MODE THEFT ALERT ALARM SYSTEM SHIPPING SLIP REMOVAL TRANSPORTATION SECURE YOUR SAFE I.HDEN KEEPING YOUR SAFE DRY HINGES AND INTERNAL MECHANISM LATCHING SCREWS CLEANING HOW TO RECOVER LOST KEYS NOTICE WARRANTY 21 WARNING The gun safe and safe door are heavy. Always ensure proper installation and do not open the door with the safe on an uneven or unstable floor. Failure to do so could result in serious injury or death. 4 5
4 GETTING STARTED 3 UNDERSTANDING YOUR SECURITY E-LOCKS Standard Home & Office Securam EC-0601A UL ESL5 UL SERIAL NUMBER All series except Max Security Behind E-Locks HANDLE HUB ACTIVE LOCKING BOLT 2 or 4 way locking Varies by model WATER- AND SMOKE PROTECTION 6 7
5 4 INSPECTING YOUR SAFE Check your safe for shipping damage as soon as you receive it. If you find any damage, please contact the delivery company (or carrier) immediately. Any damage not found upon delivery must be reported within fifteen (15) days or there will be no recourse. Any damage found at the time of delivery must be resolved with the delivery company and/or your retailer. SA Products does not guarantee damage in transit. 5 UNPACKING WARNING: GUN SAFES ARE HEAVY AND MAY BE UNSTABLE ON UNEVEN FLOORS. PLEASE USE EXTRA CAUTION WHEN HANDLING UNSECURED SAFES. 1. Remove the packaging. If your safe is on shipping feet, you can simply lift the crate up and off the safe once the strapping has been removed. If your safe does not have shipping feet, you will need to carefully remove the box and ensure you do not damage the safe and/or injure yourself. You should have someone stabilize the safe when you remove the box and other packing material from under the safe. 2. Locate and remove the plastic bag hanging from the handle on the front of the safe. Inside you will find the necessary items needed to open your safe. Remove all items and prepare to access your safe for the first time. Congratulations! 6 TO UNDERSTAND YOUR MODEL NUMBER FOR THE SPORTS FIELD MODELS LISTED BELOW, INCLUDING BASIC, STANDARD, 18-GUN WATERPROOF & FIRE SAFE, SANCTUARY, HAVEN, PSERVE, TAC LZ & JOURNEY SERIES SAFES, please refer to Sections 7-10 for Safes and E-Lock opening and operating instructions. NON-ILLUMINATED SA5520P SA5924P SA5932P SA5932PG SA5940P SA5940PG SA7240P SA5520LZ SA6033LZ SA5516J SA5520J SA5524J SA20 SA24 FOR SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES see sections for ESL5 UL E-Lock Opening and Operating Instructions. SA6028USA SA6028USAGLOSS SA6043USA SA6034USAGLOSS SA6239USA SAS6239USAGLOSS SA36 SA48 SA48GLOSS SA64 SA80 SA6040WP SA42-D75 SA60-WP SA70-D75 SA5526MEL 5924P-ROG 5940P-ROG 7240P-ROG SA5924PNBS OPERATING YOUR SAFE SA5932PNBS SA5940PNBS SA5526BF SA5524BF SA5533Basic SA5526Basic SA5524Basic SA5520Basic SA5516Basic SA5520P-SM SA5516-BF -AC SA5524-BF-AC SA5516AR SA5940P-AC SA5936P-AC SA5526P-AC SA5516 SA5520 SA5926 SA6033 SA6040 SA6046 SA7240 SA6033-GLOSS SA6040-GLOSS SA6046-GLOSS SA7240-GLOSS The instructions for opening the time and the battery installation process may vary slightly. Please refer to your specific instructions. ILLUMINATED SA5925H SA5930H SA5942H SA-IHS5520 SA-IHS5924 SA-IHS5932 SA-IHS5940 SA5924P-75 SA5932P-75 SA5940P-75 SA7240P-75 3B5942H SA3525S SA5936S 8 9
6 7 GENERAL E-LOCK OPENING INSTRUCTIONS WARNING: Never leave the jumper keys in your safe. You will need the override keys to open your gun safe until you have successfully programmed the electronic lock or if the batteries are not replaced in time. Locate the jumper keys in the plastic bag hanging from the front of the gun safe. Carefully remove the electronic keypad from the safe by rotating it counter-clockwise (slide the retaining studs up on lighted models). The keyboard can be detached from the locking ring; Let the keyboard hang slightly under the locking ring. 3. Locate the keyhole in the locking ring. Insert the key and turn it clockwise from 9 o’clock to 1 o’clock to unlock. 4. Locate the single spoke in the plastic bag hanging from the front of the safe and attach it to the spindle hub by turning clockwise until secure. Gently turn the handle clockwise until the locking bolts are retracted and you can open the vault door. 5. Inside your safe is a small box with the remaining spokes for a secure grip. Take the spokes out of the packaging and thread them into the corresponding holes in the spindle hub. NOTE FOR DROP GRIP LEVER: Your grip is factory assembled and requires no action on your part. 8 GENERAL E-LOCK BATTERY INSTALLATION IMPORTANT: When opening your safe for the first time, you must use the override key. Once the safe is open, the batteries can be inserted. The batteries are in the plastic bag with this manual. 1. Sports Afield Basic, Standard, Professional, 18-Gun Waterproof & Fire Safe, Sanctuary, Haven, Preserve, Tac LZ, and Journey series general e-lock requires 4 x AA alkaline batteries. 2. Open the battery compartment on the inside of the door to the top hinge 3. Insert batteries in the correct orientation and order 4. Close the battery compartment door. Always make sure you use brand new, fully charged batteries. NOTE: This e-lock will alert you when the batteries are low by flashing the red and green light on the keypad when the # sign is pressed. Always test batteries when installing or replacing them. If the red and green lights on the lock face come on when a button is pressed, you’ll know the batteries aren’t full. NOTE: Batteries must be inserted with correct polarity. Exhausted batteries must be removed from the product and disposed of safely. Do not mix old and new batteries. Do not mix alkaline or standard (carbon-zinc) batteries. Do not use rechargeable batteries (nickel-cadmium). 9 GENERAL E-LOCK SECURITY CODE SETUP IMPORTANT: It is necessary to reprogram your gun safe with a new security code that you have personally selected to ensure maximum household security. A security code is a series of keystrokes on the keyboard. An entry is made by pressing a key/digit once. Your security code must be between 3 and 8 digits long. Choose a security code that is easy to use but difficult to guess. A bad example would be or Be careful when choosing your security code. You want to be sure that you can operate the device quickly without making an input error. 1. All Sports Afield Basic, Standard, Professional, 18-Gun Waterproof & Fire Safe, Sanctuary, Haven, Preserve, Tac LZ and Journey series come with a factory preset code of [ # ]. 2. For the lighted lock, you need to wake up the keyboard first by pressing any number on the keyboard. Then enter the code [ # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. Open the door by turning the handle clockwise. 3. For all other non-illuminated lock models, simply enter the code [ # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. Open the door by turning the handle clockwise. 4. Now, with the door open, turn the handle counter-clockwise to lock and deploy the active deadbolts. 5. Next, on the inside of the safe near the battery compartment, locate the small copper cap. Unscrew and remove the cap. 6. Press and release the reset button. You hear a beep. The yellow light on the e-lock will illuminate to allow you to enter your new code. You can only enter a new code while the yellow light is on. 7. Make sure your latches are in the extended position and enter your new security code (between 3 and 8 digits). 8. Confirm your new security code by pressing the [ * ] icon. 9. Confirm your password by typing the new password plus the # symbol. If the code has been entered correctly, the indicator light will turn green. If the code is entered incorrectly, the indicator light will flash amber. In this case, go back to step 6 and repeat the security code reset process. 10. Do not close your safe door until you have verified your new security code at least three times to ensure the code has been saved and you can lock and unlock the door successfully. 11. Replace the copper cap over the reset button and close the door. calculated
7 IMPORTANT: If the code fails, repeat the above steps until your code is accepted. If the wrong security code is entered three times, you will be automatically locked out for 20 seconds before you can try your code again. If 3 more failed attempts are made, the keyboard will be locked for 10 minutes. NOTE: After entering the correct security code, you have 5 seconds to turn the handle and unlock the door before the locking mechanism reactivates. 10 GENERAL E-LOCK SILENT MODE 1. To silence the E-lock, enter the code [ * ]. 2. To turn the sound back on, enter the code [ * 6 6 ] Maximum Security Series gun safes do not come with override keys and must be opened with the e-lock. 1. The ESL5 UL E-lock on Sports Afield Maximum Security Series safes requires a 9V alkaline battery. 2. The battery compartment is located under the keyboard. To access, rotate the keypad to the left to release the e-lock from the locking ring. 3. Snap the 9V battery into the connector in the correct orientation. 4. Reattach the keypad to the retaining ring. 5. The e-lock is ready for programming. NOTE: This ESL5 UL E-lock is equipped to alert you of a low battery by a series of beeps (8 times). If you hear this, the battery needs to be replaced. NOTE: The battery must be inserted with the correct polarity. Exhausted batteries must be removed from the product and disposed of safely. 12 ESL5 UL E-LOCK OPENING INSTRUCTIONS 1. All Sports Afield Maximum Security Series gun safes are supplied with a factory preset code of [ # ]. 2. Press the [ C ] key followed by the factory preset code [ # ]. A beep sounds each time you press a button. If the code is entered successfully, you will hear two beeps and the green light will turn on. 3. To open the door, hold the spindle hub and turn it clockwise. 4. Inside the safe, locate the spindle handles and screw them into the corresponding holes on the spindle hub. 13 ESL5 UL E-LOCK SECURITY CODE SETUP IMPORTANT. It is necessary to reprogram your gun safe with a new security code that you have personally chosen to ensure maximum household security. A security code is a series of keystrokes on the keyboard. An entry is made by pressing a key/digit once. You must use a 6-digit security code. Choose a security code that is easy to use but difficult to guess. A bad example of a secure code would be or MAKE SURE YOUR DOOR IS OPEN 1. Locate and press the latch bar located on the door frame near the hinges 2. With the latch bar depressed, pull the latch bolts out by pressing handle counterclockwise 3. Press the [ C ] key and then press the [ # ] key. The ESL5 E-Lock will emit a short warble tone (referred to as a good combo tone) and the keypad backlight will flash with the tone. 4. Enter the last known 6-digit code. When setting up your gun safe for the first time, enter the factory preset code [ # ]. The [ C ] key can be used at any time to clear an input error. 5. Next, enter your new 6-digit security code followed by the [ # ] key. If the input is valid, the warble sound can be heard. 6. Re-enter your new 6-digit security code, followed by the [ # ] key to confirm. The warble tone confirms that the new security code has been successfully programmed. 7. If the code fails, you will hear four short beeps. The keyboard returns to sleep and the process begins again. Repeat the above steps until success. IMPORTANT: DO NOT close the safe door until you have confirmed that your new security code has been entered correctly. Try your new security code at least three times to ensure the code has been saved and you can successfully lock and unlock the door. A NOTICE. To wake up the system, press the [ C ] key before entering a code. 14 ESL5 UL E-LOCK QUIET MODE 1. To mute the E-Lock, press [ C # ] and listen for a short warble. Next, press [ 8 0 # ] and listen for a short warble. Finally, press [ 1 # ] and listen for a long warble. 2. To unmute the E-Lock, press [ C # ] and listen for a short warble. Next, press [ 8 0 # ] and listen for a short warble. Finally, press [ 0 # ] and listen for a long warble
8 15 THEFT DETECTION SYSTEM FOR THE SPORTS AFIELD MODELS LISTED BELOW INCLUDING HAVEN, PRESERVE, TAC LZ, JOURNEY AND SANCTUARY SERIES SAFES SA5936S SA3525S SA5925H SA5930H SA5942H SA-IHS5520 SA-IHS5924 SA-IHS5932 SA-IHS5940 SA.2 SA-IHS594 SA-IHS5940 SA.2 SA-IHS5940 SA.2 -IHS5932 SA-IHS5940 -75 SA5940P-75 SA7240P-75 3B5942H SA5940P-AC SA5936P-AC SA5526P-AC SA5516 SA5520 SA5926 SA6033 SA6040 SA6046 SA7240 SA6033-GLOSS SA6040-GLOSS SA6046-GLOSS SA7240-GLOSS SA6033PRO SA6033PRO-GLOSS SA6040PRO SA6040PRO-GLOSS SA5520P SA5924P SA5932P SA5932PG SA5940P SA5940PG SA7240P SA5520LZ SA6033LZ SA5516J SA5520J SA5524J SA20 SA24 SA36 SA48 SA48GLOSS SA64 SA80 SA6040WP SA42-D75 SA60-WP SA70-D P-ROG 5940P-ROG 7240P-ROG SA5924PNBS SA5932PNBS SA5940PNBS SA5526BF SA5524BF SA5533Basic SA5526Basic SA5524Basic SA5520Basic SA5516Basic SA5516- BF-AC SA5524- BF-AC SA5516AR By activating the anti-theft alarm system, the alarm will sound for 20 seconds if the safe is tampered with. To stop the alarm from sounding, enter your security code or use the override key to open the safe and remove the batteries. 1. Close door and lock active deadbolts 2. To activate, press [ * 0 0 ] to arm the anti-theft alarm system. 3. Each time a correct security code is entered, the alarm will be deactivated. To reactivate, press [ * 0 0 ]. TRANSPORT AND SECURE 16 REMOVING THE TRANSPORT RAILS WARNING: WHILE REMOVING THE SCREWS FROM THE SKIDS, ENSURE THAT A PERSON CAN HOLD AND STABILIZE THE SAFE TO PREVENT TIPPING, INJURY AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES. WARNING: BEFORE REMOVING THE TRANSPORT RAILS, ENSURE THE DOOR IS CLOSED AND LOCKED. YOUR SAFE DOOR IS HEAVY AND PRESENTS A SECURITY HAZARD UNTIL THE SAFE IS LATCHED OR PROPERLY SECURED. 1. When you receive your safe, you may find it attached to a shipping rack. The runner is secured from the bottom of the safe with four bolts. Use a wrench or 17mm socket (11/16) to remove the four screws securing the safe to the skids. 2. Have someone stabilize the safe, carefully tip the safe to the left and pull the transport rail off the bottom of the safe on the right. 3. With the shipping rail removed from one side of the safe, carefully lower the safe to the floor. 4. Follow the same procedure to remove the remaining shipping rail. FOR MAXIMUM SECURITY SPORTS SERIES (See page 8 for specific model numbers) 1. When you receive your safe, you may find it attached to a shipping rail. The runner is secured from the inside of the safe by four tie bolts. 2. Open your gun vault door and locate and remove the four black caps on the vault floor. Use a wrench or 14mm socket (9/16) to remove the four screws securing the safe to the skids. Reattach the four black caps. 3. Then close the door and extend the locking bolts by turning the handle counterclockwise. Make sure the door is properly latched before proceeding. 4. With assistance, slide the safe to one side of the pallet so that the safe extends over the back edge of the pallet. Carefully tip the safe over until the bottom of the safe touches the ground. Then tilt the safe a little more to allow the pallet underneath the safe to be removed. 5. Carefully lower the safe back down
9 17 TRANSPORTING YOUR SAFE WARNING: SAFES ARE VERY HEAVY AND EASY TO HANDLE. PLEASE BE EXTREMELY CAREFUL WHEN TRANSPORTING THE SAFE. THE USE OF A TRAINED PROFESSIONAL WITH THE PROPER MOVING EQUIPMENT IS STRONGLY RECOMMENDED. Gun safe location is very important and extreme care should be taken in this consideration. 1. To maximize the fire protection of your safe, we recommend placing the safe on lower levels in your home where fire temperatures are lower and away from easily combustible materials. 2. To maximize burglary protection and stability, it is recommended that the safe be fixed to the floor. 3. To maximize household security, we recommend placing your safe in a secluded location out of the reach and sight of children. 4. Move the safe to the desired location using a dolly that can support the size and weight of your safe. Please take all necessary precautions to protect your flooring and prevent damage. HELPFUL: TO DETERMINE WHETHER YOUR SAFE CAN GET THROUGH DOORS, STAIRS OR CORNERS, TAKE THE EMPTY SAFE BOX AND CHECK THAT IT WILL FIT INTO ITS FINAL PLACE. 1. The safe should be installed next to a side panel with minimal space on either side of the safe. The safe should lie as flat as possible against the wall and floor. If necessary, remove the baseboard and/or wall paneling. 2. Proximity and location of electrical outlets should be considered when installing powered gun cabinets. 3. Always make sure the safe is in an isolated and dry area. Never place the safe in direct contact with a wet floor. When installing your safe on a concrete floor, the use of a moisture/protective barrier is highly recommended. Otherwise, or if the safe is exposed to chemicals or other adverse environments, the warranty may be void. 4. If your safe appears uneven, you may need to chock the bottom of the safe to prevent the door from swinging open too quickly or closing itself. 18 SECURING YOUR SAFE WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS OPENED. HOWEVER, CAUTION SHOULD BE TAKEN TO AVOID TIPPING AND SAFETY HAZARDS. THE SAFE MUST BE FIXED TO THE FLOOR. Otherwise, the security and protection of the safe will be affected. FOR SPORTS AFIELD HAVEN, PSERVE, TAC LZ, JOURNEY & SANCTUARY SERIES SAFES (see pages 7 & 8 for specific model numbers) TOOLS REQUIRED TO BOLT SAFE TO CONCRETE SURFACE DRILL/HAMMER DRILL 1/2 DRILL (for installing in concrete with (hardware supplied ) WRENCH / 11/16 (17MM) HAMMER 1. Use the hardware provided or consult your dealer for hardware for your specific mounting surface 2. Open your gun safe door and locate and remove the four black caps on the safe floor. This will give you access to the factory drilled screw holes 3. To mount your safe to the floor you will first need to drill holes in the floor surface 4. Drill the appropriate diameter and depth of pilot holes based on the type of hardware being used and the type of floor surface For the supplied hardware (concrete floor mounting) we recommend using a hammer drill and a 1/2 concrete drill to drill the four corresponding holes in the concrete floor. 5. Insert the plastic anchor bolts and drive them into the pilot holes. You may need to use a hammer to fully seat the plugs into the pilot holes. 6. Secure the safe by threading and tightening all 4 anchor bolts through the factory drilled screw holes in the bottom of the safe. Make sure that the metal washer sits on the rubber washer. Tighten the screw to compress the rubber washer between the safe and the metal washer. Otherwise, in the event of a flood, water may enter the safe. Journey Series safes do not include rubber washers. 7. Put the four black caps back on the safe floor. SPORTS AFIELD MAXIMUM SECURITY SERIES SAFES (see page 8 for specific model numbers) ship without hardware. Contact your local hardware store for mounting hardware specific to your mounting surface and location. Follow the same steps as above to adjust the drill diameter and pilot hole depth based on the fastener material selected
10 USE AND MAINTENANCE 19 LOADING YOUR SAFE 1. When loading guns into your safe, make sure they are seated securely against the notches in the gun racks to prevent accidental tipping when the door is closed. 2. Store documents or heat-sensitive items in the bottom of the safe for maximum protection against fire damage. 3. Store ammo separately from valuables. 4. Don’t put anything in your safe that puts pressure on the door when you close it. 5. Select safe models have reinforced shelves, but as a good security precaution, store heavier items either on the bottom of the safe or away from the center of the shelves. 20 KEEPING THE SAFE DRY We recommend installing a moisture/protective barrier between your safe and the concrete floor to prevent moisture, mold and rust from damaging the safe. It is highly recommended that you place your safe in a location with air conditioning (heating in winter and cooling in summer). In areas with high humidity or frequent temperature fluctuations (garages), it is advisable to take appropriate precautions to protect against moisture damage. We strongly recommend using an internal dehumidifier and/or desiccant to protect your contents from rust or mold. Indoor dehumidifiers should not make direct contact with the side or back walls. 22 LOCKING PINS Occasionally it may be necessary to lubricate the active locking pins. To do this, pull out the locking bolts completely when the door is open. Wipe a small amount of oil/lubricant around each locking pin. 23 CLEANING To clean the surface of your safe, use a soft, non-abrasive cloth (we recommend lint-free polishing cloths). DO NOT use paper towels as they could scratch, mar or damage the finish of your safe. Water is often sufficient to clean the surface of your safe, but an ammonia-free window cleaner can also be used. DO NOT use metal polishes or solvents when cleaning. 24 HOW TO OBTAIN LOST KEYS To request replacement keys, please contact our Customer Services team on the number below. Please have all registration information ready before calling. Customer Service – (888) HINGES AND INTERNAL MECHANISM The hinges and internal locking mechanism are permanently lubricated and therefore require no maintenance. Opening your safe’s door panel may void your warranty. Always contact our customer service experts beforehand
11 25 NOTICES 26 WARRANTY SA Consumer Products, Inc. will repair or replace, at its option, any Sports Afield Gun Safe that has been damaged by fire, forced entry, violent assault or natural flooding for the life of the original owner. SA Consumer Products, Inc. will repair or replace, at its option, any Sports Afield Gun Safe with defective parts, paint or lock for the life of the original owner. If SA Consumer Products, Inc. determines that a replacement safe needs to be shipped, SA Consumer Products, Inc. will pay the freight cost of shipping the replacement safe to the original owner. This lifetime warranty is limited to the safe and specifically excludes any loss related to the contents of the safe. SA Consumer Products, Inc. reserves the right to obtain full evidence of your misfortune, such as: B. a police report and/or a letter of coverage from the homeowner. This warranty is not valid outside of the United States and Canada. Proof of registration and a copy of the proof of purchase must be available at the time of the claim. Visit our website at to register your safe. The lifetime guarantee only applies to the original owner of the safe. SA Consumer Products, Inc. is only responsible and liable if the safe is used in accordance with the instructions in your new Sports Afield Safe Owner’s Manual. SA Consumer Products, Inc. requires that repairs follow certain guidelines. The safe will be repaired at home if possible (parts and labor included); However, if a factory replacement is required (at the sole discretion of SA Consumer Products, Inc.), the replacement will be shipped freight prepaid, curbside. This warranty is inclusive and supersedes all other warranties, express or implied. The warranties of merchantability and suitability for a specific purpose are expressly excluded. This warranty is limited to the safe itself and/or its value and does not cover consequential damages of any kind, including but not limited to the contents in and inside the safe
Related searches to sports afield safe manual
Information related to the topic sports afield safe manual
Here are the search results of the thread sports afield safe manual from Bing. You can read more if you want.
You have just come across an article on the topic sports afield safe manual. If you found this article useful, please share it. Thank you very much.
