Top 28 아두 이노 Lte 쉴드 Quick Answer

SIM7600CE-T 4G(LTE) Shield for Arduino

| Điện tử ProE

• Article author: www.proe.vn
• Reviews from users: 44011 Ratings
• Top rated: 3.3
• Lowest rated: 1
• Summary of article content: Articles about
  SIM7600CE-T 4G(LTE) Shield for Arduino

  | Điện tử ProE
  This shield is as small as a credit card and compatible with controller boards like Arduino UNO , arduino Leonardo , arduino Mega etc. …

• Most searched keywords: Whether you are looking for
  SIM7600CE-T 4G(LTE) Shield for Arduino

  | Điện tử ProE
  This shield is as small as a credit card and compatible with controller boards like Arduino UNO , arduino Leonardo , arduino Mega etc. NTRODUCTION SIM7600CE-T 4G(LTE) Shield is a 4G/3G/2G communication and GNSS positioning module. This shield is as small as a credit card and compatible with controller boards like Arduino UNO , arduino Leonardo , arduino Mega etc. The frequency bands that SIM7600CE-T 4G(LTE) Shield supports are LTE-TDD/ LTE-FDD/HSPA+/TSIM7600CE-T 4G(LTE) Shield for Arduino, SIMCOM, Shield, Narrowband IoT (NB-IoT), Arduino chính hãng, Máy tính nhúng, Raspberry Pi, GSM/GPRS/GPS/2G/3G/4G, Arduino, IoT-Internet Of Things, 3G HAT, 4g, 4G/3G/2G/GSM/GPRS/GNSS HAT, 4G ARDUINO SHIELD, 4G HAT, GNSS, gps, Internet Of Things, iot, lập trình nhúng, MODULE 4G, MODULE 4G RASPBERRY PI, Narrowband IoT, SIM 3G, SIM 4G, SIM7600, SIM7600CE, SIM7600CE-T 4G(LTE) Shield for Arduino, SIM7600E-H, SIM7600E-H 4G HAT, SIM7600G-H, SIM7600G-H 4G HAT, SIMCOM, Smart Home, Vi điều khiển, Điện tử ProE, www.proe.vn

• Table of Contents:

IoT-Internet Of Things

Kit phát triển vi điều khiển mạch nạp

Máy tính nhúng

Arduino

Module Cảm biến Camera

Linh kiện

Màn hình

Power Supply Battery UPS

StemRobotDrones3D Printers

Dụng cụ phụ kiện điện

0938946849

0938946849

Sản phẩm vừa xem

Sản phẩm cùng loại

Read More

SIM7600CE-T 4G(LTE) Arduino Shield – DFRobot

• Article author: www.dfrobot.com
• Reviews from users: 11187 Ratings
• Top rated: 3.5
• Lowest rated: 1
• Summary of article content: Articles about SIM7600CE-T 4G(LTE) Arduino Shield – DFRobot SIM7600CE-T 4G(LTE) Shield is an Arduino compatible multi-functional board which supports GNSS positioning, GPRS, TD-SCDMA, EDGE, SMS, LTE, SPS satellite, … …
• Most searched keywords: Whether you are looking for SIM7600CE-T 4G(LTE) Arduino Shield – DFRobot SIM7600CE-T 4G(LTE) Shield is an Arduino compatible multi-functional board which supports GNSS positioning, GPRS, TD-SCDMA, EDGE, SMS, LTE, SPS satellite, … SIM7600CE-T 4G(LTE) Shield is an Arduino compatible multi-functional board which supports GNSS positioning, GPRS, TD-SCDMA, EDGE, SMS, LTE, SPS satellite, 4G/3G/2G communication, SMS and data transmission. Simcom, GNSS, GPS, arduino shield, GSM, GPRS, TD-SCDMA, EDGE, SMS, LTE, GPS satellite, positioning, 4G, 3G, 2G, arduino, arduino board
• Table of Contents:

Read More

4G + GPS Shield for Arduino and Raspberry Pi Tutorial (LTE / WCDMA / HSPA+ / 3G / GPRS)

• Article author: www.cooking-hacks.com
• Reviews from users: 34894 Ratings
• Top rated: 3.9
• Lowest rated: 1
• Summary of article content: Articles about 4G + GPS Shield for Arduino and Raspberry Pi Tutorial (LTE / WCDMA / HSPA+ / 3G / GPRS) The new 4G shield for Arduino and Raspberry Pi enables the connectivity to high speed LTE, HSPA+, WCDMA cellular networks in order to make possible the … …
• Most searched keywords: Whether you are looking for 4G + GPS Shield for Arduino and Raspberry Pi Tutorial (LTE / WCDMA / HSPA+ / 3G / GPRS) The new 4G shield for Arduino and Raspberry Pi enables the connectivity to high speed LTE, HSPA+, WCDMA cellular networks in order to make possible the … Electronics for DIY and the Internet of Things (IoT) Community. Arduino, Raspberry Pi, 3D Printers and Robotic projects. Open Source Sensor Networks for developers
• Table of Contents:

Certifications

Choosing the right cellular module for Arduino and Raspberry Pi 4G 3G GPRS GSM

Features

Kits and Accessories

Article Index

1 Features

2 Hardware

3 Software

4 Using 4G module with AT commands

5 Using 4G module like a modem

6 GPS

7 Indoor Tracking using 4G and A-GPS mode with Arduino and Raspberry Pi (Geo-Location)

8 SMS

9 FTP

10 TCP and UDP

11 HTTP

12 SD

13 Device Compatibility

14 Certifications

15 Choosing the right cellular module for Arduino and Raspberry Pi 4G 3G GPRS GSM

16 Links and Documentation

Get the Shields and Kits

Read More

4G(LTE)/3G/GSM Shield for Arduino with GPS – SIM7600CE

• Article author: www.tinyosshop.com
• Reviews from users: 30948 Ratings
• Top rated: 4.9
• Lowest rated: 1
• Summary of article content: Articles about 4G(LTE)/3G/GSM Shield for Arduino with GPS – SIM7600CE Tinysine 4G (LTE) Shield can receive data from remote locations using a low-power 4G(LTE)/3G/GSM mobile phone network.This 4G shield has better coverage and … …
• Most searched keywords: Whether you are looking for 4G(LTE)/3G/GSM Shield for Arduino with GPS – SIM7600CE Tinysine 4G (LTE) Shield can receive data from remote locations using a low-power 4G(LTE)/3G/GSM mobile phone network.This 4G shield has better coverage and … TinySine SIM7600CE-T 4G(LTE) Arduino Shield is a 4G/3G/2G communication and GNSS positioning module. Arduino 4G Shield, GPRS shield, SIM7600CE, 4G Shield, 4G Shield for Arduino, Arduino GPRS Shield, SIM7600 arduino shield
• Table of Contents:

Read More

4G(LTE)/3G/GSM Shield for Arduino with GPS – SIM7600CE

• Article author: www.mouser.kr
• Reviews from users: 36340 Ratings
• Top rated: 3.6
• Lowest rated: 1
• Summary of article content: Articles about 4G(LTE)/3G/GSM Shield for Arduino with GPS – SIM7600CE DFRobot SIM7600CE-T 4G(LTE) Arduino Shield is an Arduino expansion board based on 4G/3G/2G communication and GNSS positioning technology. …
• Most searched keywords: Whether you are looking for 4G(LTE)/3G/GSM Shield for Arduino with GPS – SIM7600CE DFRobot SIM7600CE-T 4G(LTE) Arduino Shield is an Arduino expansion board based on 4G/3G/2G communication and GNSS positioning technology. TinySine SIM7600CE-T 4G(LTE) Arduino Shield is a 4G/3G/2G communication and GNSS positioning module. Arduino 4G Shield, GPRS shield, SIM7600CE, 4G Shield, 4G Shield for Arduino, Arduino GPRS Shield, SIM7600 arduino shield
• Table of Contents:

Read More

See more articles in the same category here: https://chewathai27.com/to/blog.

SIM7600CE-T 4G(LTE) Shield cho Arduino

GIỚI THIỆU

SIM7600CE-T 4G(LTE) Shield là module truyền thông 4G/3G/2G và định vị GNSS.

Đây là shield được thiết kế nhỏ gọn và tương thích với các board Arduino như Arduino Uno, Arduino Leonardo, Arduino Mega… Các băng tần mà SIM7600CE-T 4G(LTE) hỗ trợ gồm LTE-TDD/ LTE-FDD/HSPA+/TD-SCDMA/EVDO và GSM/GPRS/EDGE. Nó hỗ trợ mạng LTE-CAT4 ( với tốc độ uplink 50Mbps và tốc độ dowlink 150Mbps). Đây là sự lựa chọn hoàn hảo cho những ai đang tìm kiếm module hiệu suất ổn định, chi phí thấp và có khả năng truyền dữ liệu trong mức tiêu thụ điện năng thấp. So với các module GSM/GPRS/GPS khác trên thị trường, SIM7600CE-T 4G(LTE) có tính năng vượt trội về hiệu suất ổn định, truyền thông qua mạng 4G và định vị GNSS chính xác.

TÍNH NĂNG

Hỗ trợ truyền thông Multi-frequency

Định vị vị trí GNSS

Tương thích với các board mạch Arduino

THÔNG SỐ KĨ THUẬT

USB Voltage: 5V

Operationg Voltage: 5V

Input Voltage: VIN(7-23V)/USB(5V)

Support Network: ​TDD-LTE B38/B39/B40/B41 FDD-LTE B1/B3/B8 TD-SCDMA B34/B39 WCDMA/HSDPA/HSPA+ B1/B8 CDMA 1X/EVDO BC0 GSM/GPRS/EDGE 900/1800 MHz 4G Communication Rate: uplink rate 50Mbps, dowlink 150Mbps

​Support AT Command Control: ​3GPP TS 27.007,27.005 and SIM7500_SIM7600 Series_AT Command

Support GNSS Positioning

Support Low Power Consumption: 20mA@7V-Flight Mode

Support LED Status Display: display the power supply status, network connection and operating mode

Operation Temperature: -40℃ ~85℃

Size: 69*54mm/2.72*2.13inch

​TÀI LIỆU THAM KHẢO

​THÀNH PHẦN TRONG BỘ SẢN PHẨM

SIM7600CE-T 4G(LTE) Shield(V1.0) x1

GPS Antenna x1

4G LTF Antenna x1

CHÍNH SÁCH BẢO HÀNH

Khách hàng khi mua SIM7600CE-T 4G(LTE) tại MLAB, MLAB đảm bảo cung cấp board mạch nhập khẩu chính hãng tới tay khách hàng, cung cấp đầy đủ hóa đơn VAT cho cá nhân, các đơn vị doanh nghiệp, trường học, cơ quan nhà nước có yêu cầu.

LTE Cellular Shield for Arduino with Voice!

Show tips

This LTE shield just sits on top of an Arduino board!

Ever wanted to turn your Arduino into a phone with LTE technology? Sure, there are lots of 2G and 3G modules out there, but of the few that exist, not many LTE modules for Arduino are well-documented or are insanely expensive! With the SIM7500 shield that’s about to change! This shield not only has standard LTE technology with worldwide coverage but it also supports 3G, GPS positioning for asset tracking, and I’ve also thrown in an I2C temperature sensor in there as well, convenient for at least sending some data to the cloud. You’re also not stuck with using 5V Arduino; the shield allows you to configure your own logic voltage so you can interface this with Raspberry Pi and other 3.3V microcontrollers.

As a firm believer in great documentation I’ve set out on a journey to use just about every cellular module I can get my hands on, including theSIM7000module, this SIM7500 project, and hopefully others as well! Join me in this adventure, share your comments, and let’s get Arduino users all around the world connected to the cell towers!

The SIM7500 Shield

So what exactly is this project about? Basically it’s a “shield” that plugs into an Arduino Uno, Mega, Leonardo, etc. and gives it LTE cellular connectivity, kind of like a phone. You can send and receive text messages, utilize LTE data to send or receive sensor data, use the GPS to track location, call another device just as you would on your phone, and all sorts of other functions that I’m still documenting and unlocking. Below is a quick overview diagram showing the various features of the shield:

Beastly features in a compact shield form factor!

Compatible with Arduino Uno, Arduino Mega, and Arduino Leonardo or practically any 1.8-5V microcontroller if wired externally and set properly (see the shield pinouts in this tutorial)

LTE CAT-1 supporting uplink speed up to 5Mbps, downlink up to 10Mbps

The shield comes in two versions, SIM7500A and SIM7500E ( learn how to select a version) . Both support 4G LTE, 3G but the SIM7500E also supports 2G and 2.5G fallback

Supports text messaging, voice calling and microphone input

Supports TCP/IP/IPV4/V6 Multi-PDP, MT PDP and FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS

Integrated GNSS/GPS positioning capabilities

MCP9808 High-accuracy I2C temperature sensor with 0.25° typical accuracy

Micro USB for debugging and sending AT commands

SIM7500 module power and network status LEDs

Convenient u.FL antenna connectors for added flexibility

So, first things first: in order to use this module we need to decide which version is most appropriate since the SIM7500 comes in two versions, the SIM7500A and the SIM7500E (probably more versions coming soon). The main differences are the geographical regions in which they operate due to the supported LTE “bands”. For more info, please see this Github wiki page on how to select the appropriate version. As you can see, both versions support 3G but the SIM7500E also supports 2.5G and 2G fallback.

Now let’s explain some of the features. One cool thing about this shield is that it has both voice input (via an electret microphone) and audio put (speaker) support, unlike my other SIM7000 shield which used the low-bandwidth LTE CAT-M and NB-IoT technologies and voice isn’t really feasible or top-notch even if it were done. That means you can call your friend with your Arduino… how cool is that?

Perhaps the most important feature (and probably why you want this shield) is it’s LTE data capabilities. Want to make a DIY home security device that takes a picture and sends it to a server? No problem! With this shield you can enable data, do HTTP/HTTPS requests, FTP stuff, and many other cool things that I have yet to explore with you all!

On the software side things are really easy! Just follow these instructions to install the Arduino library (which is an improved version of the Adafruit FONA library) and run the examples!

Goals for This Project

My goal for this project is to share what I’ve done in creating a powerful shield for Arduino users to cellular-ize (I’ll say this with pride) their projects using LTE technology. I’m on a quest to document the latest and greatest cellular modems and make them easy to interface with Arduino and other ubiquitous platforms while providing full documentation!

Keep hacking!

~ Tim

SIM7600CE-T 4G (LTE) 아두이노 쉴드 : 쉴드/GPIO/확장보드 > 라즈베리파이 > 오픈소스 하드웨어 존 > MCU보드/제어모듈

SIM7600CE-T 4G (LTE) 아두이노 쉴드

제품설명

SIM7600CE-T 4G (LTE) Shield는 4G / 3G / 2G 통신 및 GNSS 포지셔닝 모듈입니다.

이 쉴드는 신용 카드만큼 작으며 Arduino UNO, arduino Leonardo, arduino Mega 등의

컨트롤러 보드와 호환됩니다. SIM7600CE-T 4G (LTE) Shield가 지원하는 주파수 대역은

LTE-TDD / LTE-FDD / HSPA + / TD입니다. -SCDMA / EVDO 및 GSM / GPRS / EDGE.

또한 LTE-CAT4 (업 링크 속도 50Mbps 및 다운 링크 속도 150Mbps)를 지원합니다.

안정적인 성능을 갖춘이 작은 비용 효율적인 확장 쉴드는 전력 소비가 매우 적은 SMS

및 데이터 전송을 실현할 수 있습니다. 또한 최신 SIM7600CE 모듈을 채택했습니다.

시중에 나와있는 다른 GSM / GPRS / GPS 모듈과 비교할 때이 모듈은 안정적인 성능과

4G 통신 및 정확한 GNSS 포지셔닝과 같은 강력한 기능이 뛰어납니다.

제품사양

USB 전압 : 5V

작동 전압 : 5V

입력 전압 : VIN (7-23V) / USB (5V)

지원 네트워크 :

TDD-LTE B38 / B39 / B40 / B41

FDD-LTE B1 / B3 / B8

TD-SCDMA B34 / B39

WCDMA / HSDPA / HSPA + B1 / B8

CDMA 1X / EVDO BC0

GSM / GPRS / EDGE 900/1800 MHz

4G 통신 속도 : 업 링크 속도 50Mbps, 다운 링크 속도 150Mbps

AT 명령 제어 지원 :

3GPP TS 27.007,27.005 및 SIM7500_SIM7600 Series_AT 명령

GNSS 포지셔닝 지원

저전력 소비 지원 : 20mA @ 7V 비행 모드

지원 LED 상태 표시 : 전원 공급 장치 상태, 네트워크 연결 및 작동 모드 표시

작용 온도 : -40 ℃ ~ 85 ℃

크기 : 69 * 54mm / 2.72 * 2.13inch

주의사항

So you have finished reading the 아두 이노 lte 쉴드 topic article, if you find this article useful, please share it. Thank you very much. See more: SIM7600, 아두이노 4g, SIM7600 Arduino, Module SIM7600CE, Module 4G Arduino, SIM7600CE Datasheet, Module SIM 4G, LTE 모듈