Top 42 How To Turn On A Lmtv Quick Answer

You are looking for information, articles, knowledge about the topic nail salons open on sunday near me how to turn on a lmtv on Google, you do not find the information you need! Here are the best content compiled and compiled by the https://chewathai27.com/to team, along with other related topics such as: how to turn on a lmtv how to turn on lmtv lights, lmtv pmcs, lmtv tm m1083a1, tm 9-2320-391-10-2, m1078, lmtv pmcs checklist, lmtv pmcs item numbers, lmtv tm pdf

How many gears does an LMTV have?

Family of Medium Tactical Vehicles

M1078A1P2 2.5-ton LMTV cargo
Specifications
Transmission	Allison 3700 SP 7-speed automatic with integral single speed transfer case
Suspension	Parabolic tapered leaf springs and telescopic shock-absorbers
Fuel capacity	212 litres (56 US Gallons)

How much is an LMTV?

A ready-to-go LMTV from Grigsby will set you back about $50,000.

Is the LMTV reliable?

They were built specifically to operate in the most challenging conditions on the planet. The program has been an incredible success with over 90,000 FMTV’s delivered since 1993. They are the only wheeled vehicle to ever achieve the U.S. Army’s “Ultra Reliable” status and are still in production today.

How fast can an LMTV go?

xxx	LMTV 2.5-Ton Standard Cargo
Ground Clearance	22″ (559 mm)
x	Performance Characteristics
Maximum Speed	58 mph (94 km/h)
Range	400+ mi (645+ km)

12 thg 9, 1998

What is the high beam symbol?

The symbol for high beam headlights also resembles the letter “D” with lines protruding from it, although the high beam symbol uses horizontal lines, not downward-sloping ones. You should see a small blue high beam symbol in your gauge cluster when your high beams are on.

What kind of oil does a LMTV take?

Member. Schaffer 15/40 synthetic.

How fast will a M1078 go?

1. Aerodynamics and Structure Design. ]. Given that the top speed of the M1078 is 94 km/h (58 mph) and its average operating speed is much lower, minimal fuel economy gains are estimated.

What are LMTV used for?

LMTVs typically feature CTIS (Central Tire Inflation System) and the same Cat 3116 turbo diesel engine found in the MTV. CTIS alows the driver to input the terrain they are currently traveling over, which fluctuates the tire air pressure allowing for maximum traction.

How many soldiers can ride in an LMTV?

The cab accommodates driver and two passengers. Experience in Iraq led to development of an armored cab. It is known as Low Signature Armored Cab (LSAC). A team of 2 men can remove and replace the standard cab by an armored cab in the field conditions within 4 hours.

What are army cars called?

The High Mobility Multipurpose Wheeled Vehicle / HUMVEE comes in armored and unarmored variants. Also known as Hummers, the Humvee is described as a light four-wheel drive utility vehicle meant to replace Army jeeps, certain configurations of Army ambulances, and cargo vehicles.

Can Civilians Buy Oshkosh trucks?

Civilians can also own the Oshkosh L-ATV, provided they pass background checks. The car has a base price of $250,000, and one will have to pay $450,000 to include the weapons, the armor, and an R&D radio. A civilian isn’t allowed to own the $450,000 option because of the inclusion of military weapons.

What brand are army trucks?

Current vehicles

Company	Truck	Class
Astra	Astra HD	heavy trucks/tractor
BeiBen Truck	BeiBen 1928	heavy truck
Bryansky Avtomobilny Zavod	BAZ-64022	heavy tractor
Bryansky Avtomobilny Zavod	BAZ-69096	special wheeled chassis

Where is the blackout drive light located?

Blackout driving lights are mounted on the driver’s side of the vehicle, typically on the fender or grille. They give off a diffused beam of white light that takes the place of regular headlights when driving under blackout conditions. It is intended to give off just enough light for the driver to make their way.

What kind of oil does a LMTV take?

Member. Schaffer 15/40 synthetic.

How to operate LMTV, FMTV, M1078: How to start and operate

How to operate LMTV, FMTV, M1078: How to start and operate – YouTube

Article author: www.youtube.com
Reviews from users: 49930 Ratings
Top rated: 4.8
Lowest rated: 1
Summary of article content: Articles about How to operate LMTV, FMTV, M1078: How to start and operate – YouTube Updating …
Most searched keywords: Whether you are looking for How to operate LMTV, FMTV, M1078: How to start and operate – YouTube Updating #lmtv, #militaryvehiclesLMTV, FMTV, M1078
Table of Contents:

Article author: www.youtube.com
Reviews from users: 24749 Ratings
Top rated: 4.4
Lowest rated: 1
Summary of article content: Articles about Multifunction Lever-Turn signals and headlight high beam brights in 2018 Dodge Grand Caravan – YouTube Updating …
Most searched keywords: Whether you are looking for Multifunction Lever-Turn signals and headlight high beam brights in 2018 Dodge Grand Caravan – YouTube Updating Learn more about the Multifunction Lever in your 2018 Dodge Grand Caravan. This lever allows you to activate the turn signal switch when changing lanes. This…2018, moc2018, dodge, mocDodge, en_us, how-to, Grand, mocGrand, Caravan, operation, mocOperation
Table of Contents:

Multifunction Lever-Turn signals and headlight high beam brights in 2018 Dodge Grand Caravan - YouTube — Multifunction Lever-Turn signals and headlight high beam brights in 2018 Dodge Grand Caravan – YouTube

Article author: en.wikipedia.org
Reviews from users: 26184 Ratings
Top rated: 3.9
Lowest rated: 1
Summary of article content: Articles about Family of Medium Tactical Vehicles – Wikipedia Updating …
Most searched keywords: Whether you are looking for Family of Medium Tactical Vehicles – Wikipedia Updating
Table of Contents:

Contents

Development and production history[edit]

Technical description and variants[edit]

Variants[edit]

Armored cabs and fully armored derivatives[edit]

Prototype and developmental FMTVs[edit]

FMTV A2 requirement[edit]

Gallery[edit]

Operators[edit]

Family of Medium Tactical Vehicles

Series of US military vehicles (trucks)

“FMTV” redirects here. For other uses, see FMTV (disambiguation)

The Family of Medium Tactical Vehicles (FMTV) is a series of military vehicles that are based on a common chassis and vary by payload and mission requirements. The FMTV is derived from the Austrian Steyr 12M18 truck, but substantially modified to meet United States Army requirements, these including a minimum 50 percent U.S. content.[3][4]
There were originally 17 FMTV variants—four variants in the nominal 2.5 U.S. ton payload class, designated Light Medium Tactical Vehicle (LMTV), and 13 variants with a nominal 5 U.S. ton payload rating, called Medium Tactical Vehicle (MTV).[5]
Since the first FMTVs were fielded in January 1996 the family has been expanded and the overall design enhanced considerably. The FMTV was originally manufactured by Stewart & Stevenson (1996–2006), then by Armor Holdings (2006–2007), then by what is now BAE Systems Platforms & Services until 2011. It is currently manufactured by Oshkosh Corporation.[3]
Development and production history [ edit ]
FMTV’s origins trace back to a U.S. Army Training and Doctrine Command (TRADOC) requirements document issued in 1983 for a Medium Tactical Truck (MTT), the intended replacement for the in-service 2.5-ton truck. In July 1984 a program to look at a future 5-ton truck procurement to replace in-service 2.5- and 5-ton trucks began. Cost analysis demonstrated that the procurement should be for both 2.5- and 5-ton trucks, and in October 1984 FMTV formally began as a program. The request for proposals (RFP) for FMTV was released in 1988. At this time it was expected that around 120,000 trucks would be ordered over three five-year contracts.[3][6]
In October 1988, the United States Army awarded contracts to Stewart & Stevenson, the Tactical Truck Corporation (a 50/50 joint venture between General Motors Military Vehicles and the BMY Wheeled Vehicle Division of the Harsco Corporation), and Teledyne Continental Motors for 15 prototype vehicles each, these to be completed by January 1989. In October 1991 a five-year FMTV contract was awarded to Stewart & Stevenson. The initial contract order total was expected to be 20,000 vehicles, but this was reduced to 10,843 vehicles valued at US$1.2 billion. Some options were added and raised the total to 11,197 vehicles over what would be extended to seven contract years. The first FMTVs were fielded in January 1996.[3][6]
In October 1998 Stewart & Stevenson was awarded the second FMTV contract, this for 8,000 trucks and 1,500 companion trailers and with a value of $1.4 billion. Total quantities including options were 11,491 trucks and 2,292 trailers, delivered between September 1999 and October 2004. Trucks were the improved A1 model, with improvements including an uprated engine (1998 EPA compliant) and transmission, and the introduction of ABS braking. The first A1 models were fielded in July 2000.[3][6]
Stewart & Stevenson and Oshkosh Truck Corporation were awarded contracts in April 2001 for the Evaluation Phase (Phase 1) of the FMTV A1 Competitive Rebuy (FMTV A1 CR) program for the next FMTV production contract. Following trials and evaluation, in April 2003 the contract was awarded to Stewart & Stevenson. Production of the FMTV A1 CR (designated FMTV A1R) began in Q3 2004. Improvements to A1R models were numerous and included a new EPA 2004 compliant Caterpillar C7 engine. A total of 21,149 FMTVs and companion trailers were built under the FMTV A1R contract award.[3]
In May 2006, Stewart & Stevenson was acquired by Armor Holdings Inc., and in August 2007, Armor Holdings was acquired by BAE Systems.[8]
The United States Army had intended that the Future Tactical Truck System (FTTS) with just two variants would eventually replace virtually all of its tactical wheeled vehicle fleet including the FMTV. FTTS never materialized, however along with inputs from other efforts it continues to be used to define requirements for future United States Army trucks.[3] With FTTS already faltering, BAE Systems was awarded a bridging contract in June 2008 for up to 10,000 FMTVs or trailers, the contract including an option (which was exercised) for 10,000 additional vehicles.[9]
In May 2009 BAE Systems, Navistar Defense and Oshkosh Defense each announced they had submitted proposals for the FMTV A1P2 competitive rebuy program to the U.S. Army’s Tank-Automotive and Armaments Command (TACOM) Life Cycle Management Command. In August 2009, the United States Army announced that Oshkosh Defense had been awarded the FMTV A1P2 rebuy production contract. The award was protested by both BAE Systems and Navistar.[10]
The FMTV A1P2 rebuy was awarded as a five-year ‘build-to-print’ requirements-type award that at award allowed the U.S. government to order from 0 up to 12,415 trucks and 10,926 trailers through to calendar year 2014. Some FMTV variants are excluded from the rebuy competition, those excluded include specialist FMTV variants such as HIMARS, Patriot, MEADS and LVAD, plus all the armored cabs developed by BAE Systems.

According to the United States Army (in February 2012) all FMTV work with BAE Systems (minus a small number of armor B-kits) had concluded, BAE Systems and legacy companies having delivered around 74,000 FMTV trucks and trailers to the United States Army.

U.S. budgetary projections of March 2012 suggested that due to funding constraints the FMTV program would be terminated in FY14. Under the FMTV contract orders could be placed until December 2013, with first deliveries to commence within one year of that, with final deliveries one year later. Contract extensions have been made and the Justification and Approval (J&A) notice for the latest of these, which will extend the FMTV contract from 30 September 2016 to 25 August 2019 and will allow for the continued procurement of FMTV A1P2s, was released on 14 October 2016. One day earlier, on 13 October 2016 the U.S. Army solicited proposals for the FMTV A2 rebuy competition.

On 11 January 2017 Israel’s Ministry of Defense announced it would be acquiring 200 FMTVs from Oshkosh in a contract valued at $200 million. Deliveries are expected to start this year and conclude mid-2018. The MoD noted that additional orders are likely.[12] At this time Oshkosh confirmed that since deliveries started in 2010, the company had received orders for over 24,500 FMTV trucks and 11,400 FMTV trailers.[13]
On 21 September 2017 Oshkosh announced that the U.S. Army had announced an administrative modification to the FMTV A1P2 requirements contract with the company, this to establish the eighth, ninth and tenth Order Years’ pricing under the contract, at an estimated value of $466 million. This administrative modification authorizes future orders under the FMTV A1P2 contract through August 25, 2019. This contract extension will close out production of the FMTV A1P2.[13]
On 21 September an order for 1,065 FMTVs at a value of $260.1 million under Order Year 8 of the latest contract extension was announced.[13] On 27 September a further two Order Year 8 orders for a total of 148 FMTVs valued at more than $36 million was announced, with Oshkosh also confirming that the company had delivered more than 36,200 FMTV trucks and trailers.[14] On 6 November Oshkosh announced the delivery of the 25,000th FMTV truck to the US Army.[15] On 14 June 2018 Oshkosh announced that the U.S. Army Contracting Command had placed four additional orders for a total of 771 FMTV A1P2s, valued at $159.6 million.[16]
Oshkosh Defense announced on 27 February 2019 that the U.S. Army Tank-automotive and Armaments Command (TACOM) Life Cycle Management Command (LCMC) had placed orders with the company for a further 354 FMTV A1P2 trucks and trailers at a value of $75 million. By February 2019, Oshkosh had delivered more than 38,100 FMTVs since the award of the FMTV A1P2 contract.[17] On 28 June 2019 the US Department of Defence announced that Oshkosh had been awarded a $320,000,000 modification to domestic and Foreign Military Sales (Argentina, Djibouti, Iraq, Lebanon, Romania) contract W56HZV-09-D-0159 for procurement of Family of Medium Tactical Vehicle variants. Estimated completion date is 24 August 2021.[18]
In August 2021 Oshkosh confirmed that the company had produced over 40,500 A1P2 trucks and trailers.[19]
FMTVs are currently[when?] being reset at the Red River Army Depot on return from deployed operations, and current projections are for a Recap (Recapitalization) program to commence in 2020/2021.

Technical description and variants [ edit ]
The 2.5-ton (4×4) FMTV is designated as the Light Medium Tactical Vehicle (LMTV), while the 5-ton (6×6) is designated the Medium Tactical Vehicle (MTV).[6]
The FMTV is based on the Austrian Steyr 12 M 18 (4×4) truck, but substantially modified to meet United States Army requirements that included a minimum 50% US content. The original 15 FMTV prototypes were assembled in Austria and while based on the 12 M 18 chassis-cab, were fitted with a number of US-supplied/specification components including a Caterpillar diesel engine, Allison automatic transmission and Meritor drive axles.[3][6]
In a move away from previous United States Army designs, a Cab Over Engine (COE) design was selected for the FMTV as while the US Army did not specify this configuration, given the Cold War situation prevailing at the time it had indicated that overall length for shipboard transport was a consideration.

On a model-for-model basis the FMTV is around 3 ft. shorter than its bonneted predecessors, while retaining a C-130 Hercules transport capability. Subject to load dimensions, all original FMTV variants are C-130 transportable at GVWR and all models capable of being transported underslung by helicopter are fitted with a sliding outrigger system. Low Altitude Parachute Extraction System (LAPES), later revised to Low Velocity Air Drop (LVAD) variants of A0 production LMTV (M1081 cargo) and MTV (M1093 cargo and M1094 dump) variants were produced.

The chassis and cab of the FMTV feature extensive corrosion protection. It was the first truck to pass the United States Army’s 22-year accelerated corrosion test.[3][20]
The design of FMTV has never remained static and to further increase reliability, user friendliness and operational flexibility, detailed refinements/upgrades have continued throughout FMTVs production run.[6]
FMTV is built around a conventional bolted / huck-bolted, cold-formed C-section chassis with bolted-in tubular cross-members. The high-grade 758 MPa steel used is sourced from Sweden. LMTV variants can be fitted with a DP-10J winch with an 11,000 lb. line pull. MTV variants use a DP-515 winch with a 15,500 lbs. line pull.[20]
Current production FMTV A1P2s are powered by a 2007 Environmental Protection Agency (EPA) emissions compliant 7.2-liter six-cylinder Caterpillar C7 diesel engine developing 275 hp and 860 Lb.-Ft. torque in LMTV variants and 330 hp and 860 Lb-Ft.torque in MTV variants.[1][3] FMTV A1Rs have a 2004 EPA emissions compliant version of the same engine with the same power output. FMTV A1 variants have an earlier 1998 EPA emissions compliant version of this engine, the 3126 ATAAC which developed 275 hp at 2400 rpm and 815 Lb.-Ft.torque at 1,600 rpm in LMTV variants and 330 hp and 850 Lb.-Ft.torque in MTV variants. A 6.6-liter derivative of this engine, the 3116 ATAAC, was fitted to FMTV A0 models where it developed 225 hp and 735 Lb.-Ft. torque in LMTV variants, and 290 hp at 2600 rpm and 860 Lb.-Ft. torque in MTV variants.[20]
The Allison 3070 SP seven-speed transmission[1] fitted to A1P2 and A1R FMTVs has also evolved with the FMTV, its A1 designation being MD 3070 PT, its A0 designation being MD-D7. This has an integral single-speed transfer case. All-wheel drive is full-time, with a 30/70 per cent front/rear torque split for on-road driving, and a 50/50 per cent split for off-road driving.

All FMTV models are fitted with Meritor beam axles, the ratings and specifications of which have also evolved as the FMTV has developed. Suspension is by a combination of parabolic tapered leaf springs (inverted on the MTV rear bogie), shock-absorbers, and an anti-roll bar for the rear axle/bogie;[20]
Two cargo trailers are part of the Family of Medium Tactical Vehicles (FMTV). The M1082 single-axle trailer is used with the LMTV cargo truck and the M1095 twin-axle trailer is use with the MTV cargo truck. Both trailers have payloads that match that of the towing truck, and they share many components (including axles) with the towing truck.[1][6]
Variants [ edit ]
(sequenced by U.S. Army M number)

M1078 A0/A1/A1R/A1P2 – LMTV Cargo [5] NSN 2320-01-549-8577 [21]
A0/A1/A1R/A1P2 – LMTV Cargo NSN 2320-01-549-8577 M1078 A0/A1/A1R/A1P2 – LMTV Cargo with winch [5] NSN 2320-01-549-8611

A0/A1/A1R/A1P2 – LMTV Cargo with winch NSN 2320-01-549-8611 M1079 A0/A1/A1R/A1P2 – LMTV Van [5] NSN 2320-01-552-7745

A0/A1/A1R/A1P2 – LMTV Van NSN 2320-01-552-7745 M1079 A0/A1/A1R/A1P2 – LMTV Van with winch [5] NSN 2320-01-552-7749

A0/A1/A1R/A1P2 – LMTV Van with winch NSN 2320-01-552-7749 M1080 A0/A1/A1R/A1P2 – LMTV Chassis 3.9 m [5] NSN 2320-01-552-7791

A0/A1/A1R/A1P2 – LMTV Chassis NSN 2320-01-552-7791 M1081 A0 – LMTV Cargo-airdrop LVAD

A0 – LMTV Cargo-airdrop LVAD M1082 A1/A1R/A1P2 – Trailer, LMTV cargo [5] NSN 2320-01-449-1775

A1/A1R/A1P2 – Trailer, LMTV cargo NSN 2320-01-449-1775 M1083 A0/A1/A1R/A1P2 – MTV Cargo [5] NSN 2320-01-549-8610

A0/A1/A1R/A1P2 – MTV Cargo NSN 2320-01-549-8610 M1083 A0/A1/A1R/A1P2 – MTV Cargo with winch [5] NSN 2320-01-549-8565

A0/A1/A1R/A1P2 – MTV Cargo with winch NSN 2320-01-549-8565 M1084 A0/A1/A1R/A1P2 – MTV Cargo with material handling equipment (MHE) [5] NSN 2320-01-552-7739

A0/A1/A1R/A1P2 – MTV Cargo with material handling equipment (MHE) NSN 2320-01-552-7739 M1084 A0/A1/A1R/A1P2/RSV – MTV Cargo with MHE (HIMARS RSV) [5] NSN 2320-01-552-7767

A0/A1/A1R/A1P2/RSV – MTV Cargo with MHE (HIMARS RSV) NSN 2320-01-552-7767 M1085 A0/A1/A1R/A1P2 – MTV Cargo, Long Wheelbase Cargo (LWB) [5] NSN 2320-01-552-7773

A0/A1/A1R/A1P2 – MTV Cargo, Long Wheelbase Cargo (LWB) NSN 2320-01-552-7773 M1085 A0/A1/A1R/A1P2 – MTV LWB Cargo with winch [5] NSN 2320-01-552-7770

A0/A1/A1R/A1P2 – MTV LWB Cargo with winch NSN 2320-01-552-7770 M1085 A0/A1/A1R/A1P2 – MTV LWB Cargo w/ Sideboard Delete [5] NSN 2320-01-552-7770

A0/A1/A1R/A1P2 – MTV LWB Cargo w/ Sideboard Delete NSN 2320-01-552-7770 M1086 A0/A1/A1R/A1P2 – MTV LWB Cargo with MHE [5] NSN 2320-01-552-7780

A0/A1/A1R/A1P2 – MTV LWB Cargo with MHE NSN 2320-01-552-7780 M1086 A0/A1/A1R/A1P2 – MTV LWB Cargo with MHE & winch [5] NSN 2320-01-552-7776

A0/A1/A1R/A1P2 – MTV LWB Cargo with MHE & winch NSN 2320-01-552-7776 M1087 A1R/A1P2 – MTV Expansible Van [5] NSN 2320-01-552-7781

A1R/A1P2 – MTV Expansible Van NSN 2320-01-552-7781 M1088 A0/A1/A1R/A1P2 – MTV Tractor [5] NSN 2320-01-552-7759

A0/A1/A1R/A1P2 – MTV Tractor NSN 2320-01-552-7759 M1088 A0/A1/A1R/A1P2 – MTV Tractor with winch [5] NSN 2320-01-552-7759

A0/A1/A1R/A1P2 – MTV Tractor with winch NSN 2320-01-552-7759 M1089 A0/A1/A1R/A1P2 – MTV Wrecker Oshkosh-produced M1089 have different recovery equipment [5] NSN 2320-01-595-3994

A0/A1/A1R/A1P2 – MTV Wrecker NSN 2320-01-595-3994 M1090 A0/A1 – MTV Dump

A0/A1 – MTV Dump M1091 – MTV 1,500 gallon Fuel Tanker Type Classified but did not enter production [20]
– MTV 1,500 gallon Fuel Tanker M1092 A0/A1/A1R/A1P2 – MTV Chassis 4.1 m [5] NSN 2320-01-552-7793

A0/A1/A1R/A1P2 – MTV Chassis NSN 2320-01-552-7793 M1093 A0 – MTV Cargo-airdrop LVAD

A0 – MTV Cargo-airdrop LVAD M1094 A0 – MTV Dump-airdrop LVAD

A0 – MTV Dump-airdrop LVAD M1095 A1/A1R/A1P2 – Trailer, MTV Cargo [5] NSN 2320-01-449-1776

A1/A1R/A1P2 – Trailer, MTV Cargo NSN 2320-01-449-1776 M1096 A0/A1/A1R/A1P2 – MTV LWB Chassis 4.5 m [5] NSN 2320-01-552-7796

A0/A1/A1R/A1P2 – MTV LWB Chassis NSN 2320-01-552-7796 M1140 A1/A1R HIMARS High Mobility Artillery Rocket System, launcher chassis

A1/A1R HIMARS High Mobility Artillery Rocket System, launcher chassis M1147 LHS (palletized) Load Handling System Trailer [5] NSN 2320-01-508-7887

LHS (palletized) Load Handling System Trailer NSN 2320-01-508-7887 M1148 A1R/A1P2 LHS (palletized) Load Handling System Truck, eight metric tonnes / 8.8-ton [5] NSN 2320-01-557-4546

A1R/A1P2 LHS (palletized) Load Handling System Truck, eight / 8.8-ton NSN 2320-01-557-4546 M1157 A1R/A1P2 10-ton Dump [5] NSN 2320-01-552-7787

A1R/A1P2 10-ton Dump NSN 2320-01-552-7787 M1157 A1R/A1P2 10-ton Dump with winch [5] NSN 2320-01-552-7782

A1R/A1P2 10-ton Dump with winch NSN 2320-01-552-7782 XM1160 10-ton MEADS air defence chassis (5.5 m wheelbase )

10-ton MEADS air defence chassis (5.5 m wheelbase ) Mongoose Mobile Launcher Chassis (MLC) (cancelled)

M1273 A1P2 MTV 10-ton chassis[5] NSN 2320-01-621-6239

MHE: material handling equipment RSV: re-supply vehicle LHS: load handling system LWB: long wheelbase

Armored cabs and fully armored derivatives [ edit ]
Current and recent operational scenarios call for logistic trucks of the FMTV type to have at least the option of cab armoring. When it entered production, armoring was not considered an option for the FMTV. The first protection solution for the FMTV was not in answer to such scenarios, but was developed by Stewart & Stevenson and O’Gara-Hess & Eisenhardt Armoring Company (OHE). Called the Crew Protected Cab, it was specifically for the HIMARS variant and offered flash and Foreign Object Debris (FOD) protection during launch. Designs followed for an Enhanced Crew Protected Cab, and later an Armor Protected Cab, each adding more ballistic capability against direct fire, artillery burst and mines.[6]
To meet emerging threats on deployed operations, in March 2004 DRS Technical Services was awarded a $16.3 million contract to provide 272 armor protection kits for the FMTV. A total of 1,862 kits are understood to have been produced in total. These kits were based around ballistic-protection panels installed on standard FMTV cabs.[22]
In answer to demands for greater crew protection, BAE Systems developed the Low Signature Armored Cab (LSAC) for all variants of the FMTV. The LSAC replaced the standard FMTV cab (with which it shares internals) in a remove and replace operation.[23]
To meet the US Army’s current Long Term Armor Strategy (LTAS) for armored cabs, BAE Systems developed the LTAS cab for the FMTV. BAE Systems states that it produced over 9,000 LTAS cabs for the FMTV A1P2 variant. All Oshkosh FMTV vehicles include the company’s own LTAS-compliant armor solution.[1]
LTAS is based around the A and B kit principles, this allowing for vehicles to be armored as required, and with the add-on applique package adaptable to prevailing threats and upgradeable as new armoring technologies emerge. The A-Kit, which includes a new cab, modifies the FMTV to allow the addition of armour; the B-Kit being the bulk of the armor itself.[24]
The Caiman Mine Resistant Ambush Protected (MRAP) vehicle is based on the MTV A1R platform. The United States Marines placed an initial order with the then Armor Holdings for 1,170 Caiman in July 2007. In total 2,868 Caiman were ordered, with deliveries completed during November 2008. BAE Systems unveiled the Caiman MultiTerrain Vehicle (MTV) at AUSA in Winter 2010. The Caiman MTV is a modified version of the base Caiman that features a revised driveline, new chassis and upgraded fully independent suspension. BAE Systems received contracts to upgrade 2,071 (1,700 + 371) Caiman to Caiman MTV standard, these upgrades completed Q1/Q2 2014. Post-Afghanistan no Caiman MRAPs have been retained by U.S. armed forces, although some have been transferred to U.S. law enforcement agencies. Others have been offered as Excess Defense Articles (EDA) to Iraq, Jordan, Nigeria and the United Arab Emirates (UAE).[3]
BAE Systems unveiled the Caiman Light (CLT) in 2008, a five-man 4×4 version of the Caiman. To meet the Iraqi Light Armored Vehicle Requirement (ILAV) BAE Systems offered a fully armored LMTV on which the LSAC cab was extended rearwards into a troop carrying body. Neither of these proposals entered production.[3]
Prototype and developmental FMTVs [ edit ]
Working with Multidrive an LMTV was integrated with a powered companion trailer to produce a C-130 Hercules transportable vehicle with a 15,000 kg payload.

The FMTV Hybrid Hydraulic Vehicle (HHV) was selected as the test platform for the development of a hybrid hydraulic propulsion system.

The FMTV was selected as the platform to demonstrate that a 155 mm M777 howitzer and prime mover could, for the first time, be deployed in the same C-130 aircraft.

Stewart & Stevenson produced five hybrid electric FMTVs, each tailored for a specific application.

Stewart & Stevenson developed an 11-ton FMTV A1 demonstrator to demonstrate the growth potential of the FMTV family and C4ISR integration potential, via technology insertions, while retaining maximum commonality with the current FMTV fleet. A second vehicle with a tilt-type loadbed was also developed as part of the aborted Future Tactical Truck System (FTTS) requirement. A 13-ton demonstrator then followed.

Stewart & Stevenson developed a 13-ton Medium Tactical Truck Demonstrator (MTTD) that incorporated many of the technologies and capabilities that the Army then envisioned for its future trucks.

A number of 8×8 FMTVs have also been developed, these including examples for Australia’s Land 121 (awarded to Rheinmetall MAN Military Vehicles (RMMV)), a 13-ton demonstrator with a load handling system, and a pair of chassis as part of the Future Tactical Truck System (FTTS) undertaking.

Oshkosh Corporation unveiled the FMTV Enhanced Protection & Mobility Demonstrator (EPMD) during 2012. The FMTV EPMD is fitted with Oshkosh’s TAK-4 independent suspension system and a custom-fitted Oshkosh Underbody Improvement Kit (UIK). [25]
To help inform the U.S. Army’s FMTV A2 acquisition strategy and performance upgrade requirements Nevada Automotive Test Center was awarded a contract in 2014 to manufacture and test two FMTV Technology Demonstrators. These are based on government-supplied M1157 A1P2 10-ton Dump chassis produced by Oshkosh, but upgraded by NATC. Testing concluded in February 2016.

FMTV A2 requirement [ edit ]
Early in 2014 the U.S. Army’s Program Executive Officer for Combat Support and Combat Service Support (CS CSS) had suggested that the Army would be seeking a new medium truck family in the mid-2020s.[26] On 13 October 2016 the U.S. Army solicited proposals for the FMTV A2 rebuy competition.

The FMTV A2 request for proposals (RfP) stated the program would seek “to integrate higher capacity suspension, wheels, and tires; integrate underbody protection; increase engine power; integrate higher capacity alternator; integrate data bus upgrade; and integrate safety enhancements”. The winner of the contract would be asked to integrate such upgrades; build the vehicles, trailers, and kits; and provide program, maintenance, and logistics support. According to the RfP, the FMTV A2 contract is expected to cover five ordering years with two additional one-year option periods for a potential total of 2,400 vehicles if all options are exercise.[27] In a subsequent statement, an Army spokesman said the RfP “includes an estimated quantity of approximately 2,400 new production vehicles. However, the actual quantities in any future award are undetermined and will depend on proposed pricing for this quantity, army requirements, and available funding.”[28]
Oshkosh will build A2 FMTVs.

Oshkosh announced on 8 May 2017 that the company had submitted a proposal in response to the RfP for the Family of Medium Tactical Vehicles (FMTV) A2 production effort.[29] At this point, the U.S. Army anticipated a contract award announcement in the second quarter of fiscal year 2018 and stated that the next generation FMTV A2 would comprise 16 models and three trailers.[14]
The Army announced on 7 February 2018 that it had selected Oshkosh to build to FMTV A2. The initial estimated contract value is $476.2 million with no cap on the number of vehicles the Army may purchase. The firm fixed price contract covers a five-year ordering period plus two additional one-year options. The estimated date of completion has previously been quoted as February 2022. Both Oshkosh and AM General submitted bids for the requirement.[30] Following the FMTV A2 award Oshkosh initially built and delivered vehicles in support of Production Verification Testing (PVT), Live Fire Testing (LFT) and logistics development. In August 2021, it was announced by Oshkosh that the Army’s Tank-Automotive and Armaments Command (TACOM) Life Cycle Management Command (LCMC) had awarded the company a $152 million delivery order for 541 FMTV A2. The Army is expected to begin fielding the A2 FMTV variant in June 2023.[19]
FMTV A2 variants are:

M1078A2 LMTV cargo, CARGO

M1079A2 LMTV Van TRUCK, VAN

M1080A2 LMTV Chassis CHASSIS, TRUCK

M1082 Trailer TRAILER, Cargo, LMTV

M1083A2 MTV Cargo TRUCK, CARGO

M1084A2 MTV Cargo with MHE TRUCK, CARGO

M1085A2 MTV Cargo LWB TRUCK, CARGO

M1086A2 MTV LWB Cargo with MHE TRUCK,

M1087A2 MTV Expansible Van TRUCK, VAN

M1088A2 MTV Tractor TRUCK TRACTOR

M1089A2 MTV Wrecker TRUCK, WRECKER

M1092A2 MTV Chassis CHASSIS, TRUCK

M1095 Trailer TRAILER, Cargo, MTV XXXX-XX-

M1096A2 MTV LWB Chassis CHASSIS, TRUCK

M1147 Trailer, LHST TRAILER, FMTV Load Handling

M1148A2 LHS Truck TRUCK, MATERIALS HANDLING CONTAINER HOISTING

M1157A2 10 Ton Dump TRUCK, DUMP XXXX-

M1157A2 10 Ton Dump with winch TRUCK, DUMP

M1273A2 10 Ton Dump Chassis CHASSIS,

Gallery [ edit ]
(Production FMTVs are presented in U.S. Army M number sequence)

M1078 A1R (front), with an Oshkosh-produced M1083 A1P2 in A-kit configuration immediately behind

Oshkosh-produced M1083 A1P2 5-ton MTV cargo in A-kit configuration

At the Sealy, Texas production facility, a Stewart & Stevenson produced M1084 A1R MTV Cargo with Crane

Oshkosh-produced M1087 A1R MTV Expansible Van in A-kit configuration

At the Sealy Texas production facility, a Stewart & Stevenson produced M1088 A1R MTV Tractor Truck

Republic of China (Taiwan) army BAE Systems-produced M1088 FMTV tractor truck in the car park of Hukou Camp

Oshkosh-produced M1089 A1P2 MTV wrecker in A-kit configuration

At Stewart & Stevenson’s Sealy Texas production facility, a M1095 A1R MTV trailer

At Stewart & Stevenson’s Sealy Texas production facility, a M1096 A1R MTV Long Wheelbase (4.5 m) Chassis

Two Lockheed Martin/BAE Systems M1140 High Mobility Artillery Rocket System (HIMARS) of the U.S. Marines

Stewart & Stevenson produced M1148 A1R MTV LHS

Oshkosh-produced M1157 A1P2 MTV 10-ton Dump in B-kit configuration

Oshkosh’s M1087 A1P2 LTV-based Enhanced Protection & Mobility Demonstrator (EPMD) [25]
BAE Systems Caiman Mine-Resistant Ambush Protected (MRAP) vehicles in Iraq (Caiman is based on the FMTV)

Operators [ edit ]
Map with FMTV operators in blue

Specific details of FMTV export orders are seldom officially announced, with a large quantity of deliveries covered by assorted US Foreign Military Sales (FMS) awards. Djibouti, Lebanon and Romania were three countries listed as possible future recipients of FMTVs in a June 2019 US DoD FMS delivery announcement,[18] with Romania and Lebanon since confirmed.

(users of the FMTV-based Caiman MRAP are not included)

See also [ edit ]
References [ edit ]

We Bought a Military Truck So You Don’t Have To

Get full access to Outside Learn, our online education hub featuring in-depth fitness, nutrition, and adventure courses and more than 2,000 instructional videos when you sign up for Outside+ .

Looking for a truck that’s big enough for a family to live in, but still has true go-anywhere off-road capability? You could spend $100,000-plus on a purpose built rig. Or, my wife, Rachel, and I thought, you could spend a couple grand on a decommissioned military truck.

https://www.instagram.com/p/BYtaby_AnWT/

Meet the LMTV

It stands for Light Medium Tactical Vehicle. But remember we’re talking military terminology here, so in this case “light” actually translates to a curb weight over 19,000 pounds. To put that in perspective, a four-door Jeep Wrangler weighs 4,000 pounds.

Like pretty much all the U.S. military’s equipment, the LMTV is made in America. It’s powered by a 6.6-liter Caterpillar turbodiesel engine that sends power to all four wheels through a seven-speed Allison transmission, which is similar to commercial items used in big rigs and construction equipment. In other words, they’re designed to last a long time while working hard.

Our truck is the van version of the LMTV—designated the M1079—and was meant to be used as a radio communications vehicle. Only about one in 50 LMTVs is configured like this. The big aluminum box on the back has five huge windows that open for ventilation, and come equipped with blackout shades. The 47-inch tires are equipped with a built-in inflation system that allows the driver to air them up and down with the push of a button. That’s a huge time saver when it’s time to get back on the highway (which requires high tire pressures) after a few days playing in the sandy desert (low pressures).

https://www.instagram.com/p/BYJMYKbALy7/

Why Buy One?

Rachel and I had been planning to drive our 1987 Toyota 4Runner down to Tierra Del Fuego at the southern tip of South America. That was before our son, Wilder, came along last September, and before we decided to adopt a third dog. In order to keep traveling, we needed to find a larger vehicle. Something we could sleep, cook, and shower in.

We started considering the options. Would a four-wheel drive van be big enough? Could a school bus go off-road? Did it make sense to tow a trailer?

To help narrow the choices, we created a list of must-haves: secure seating for at least three, possibly four, humans; room for the dogs; diesel power for better fuel economy; at least 80 square feet of living space; and four-wheel drive for go-anywhere ability. And it couldn’t cost more than $50,000, including the build-out.

That last factor ruled out a Mercedes Sprinter, quad-cab Mitsubishi Fuso, and more exotic, custom-build off-road RVs like those made by Earthroamer or Sportsmobile. So we turned to the LMTV.

https://www.instagram.com/p/BUZ52Pmlqk6/

How Do You Buy One?

Buying an old military truck isn’t as straight forward as buying a normal used car. The most common way people acquire them is through an online military surplus auction, but that’s a process filled with potentially ruinous pitfalls. While numerous photos of each vehicle are included in each listing, as are the results of a perfunctory inspection, most of the trucks sold aren’t in running condition, and require a tractor trailer in order to collect them from the auction site. (Expect to pay $3 per mile for shipping.) Once you’ve gotten the vehicle home, getting it into roadworthy condition, and getting it registered, will likely prove extremely time consuming and expensive.

That hassle has created a cottage industry for resellers, who buy the trucks at auction for prices sometimes as low as a couple thousand dollars, perform the minimum work required to get them road legal, then turn a healthy profit by selling you a drivable machine. We went that route, purchasing an LMTV from a reseller in Maryland for $23,000.

https://www.instagram.com/p/BYTzUGiA2C_/

Six Months and $45,000 Later

From that moment on, we entered a half-year crash course in mechanics and industrial interior design.

Getting the truck from Maryland to Seattle was our first lesson and challenge. In this case, we phoned a friend, who thought the idea of driving a truck with a 55-mile-per-hour top speed coast-to-coast sounded like a good time and offered to fly out and get the LMTV for us. He checked the fluids and tire pressures, handed over our cashier’s check, and met us in Flagstaff, Arizona, at the Overland Expo, six days later.

From there, we wound our way back to the Pacific Northwest, taking 4×4 trails whenever possible. We crossed sand dunes, forded rivers, and slept on our inflatable sleeping pads in the back of the truck. LMTV life felt good all the way to a truck stop on the outskirts of Bend, Oregon, where the alternator failed. A new one cost 10 days and $900.

Once we got the truck home, we began stripping it down to turn it into the RV we wanted. Inside, we got rid of the avocado green paint and the bright, buzzing 48-inch fluorescent lights. 500-pounds of steel plates bolted to the floor got in the way of our insulation and wood flooring, so I ground off its two-inch-thick bolts and tugged the plate out the back door. We built a queen-size bed platform, stainless steel counters, a sink, shower, and installed a hot-water heater.

Next, we needed off-grid power. The truck’s roof was big enough to hold two commercial-grade 435-watt solar panels from Sunpower. The electricity they produce is fed through a Victron solar charge controller, and stored in four 100 amp-hour AGM batteries. That powers the water pump, fridge, and lighting, with enough left over to run a chop saw and charge batteries.

Building the interior was way easier than fixing the truck itself, where even seemingly routine upgrades took on biblical proportions. Take swapping out the 24-year-old tires, our first big project after replacing the alternator. A new tire runs $1,500, and you need five. (The LMTV has a full-size spare mounted on a hydraulic lift behind the cab.) Fortunately, we found a seller offering new old stock tires for $300 a piece. Shipping five up north was just $587 for all of them.

Of course, mounting those behemoths was nothing like putting a new set of rubber on a passenger car. Lacking the military’s specialist tools, I resorted to an angle grinder to cut the old tires’ beads off the rims. Loosening the lug nuts took 500 pound-feet of force. The whole project took most of a week. Pay someone else to do it and it’ll cost you $100 per hour, at five hours of labor per wheel.

I also did some other basic maintenance. For unknown reasons, the military specs motor oil in the transmission, so I replaced that with actual transmission fluid. The 6.6-liter engine takes 6.5 gallons, or $150, of oil. After sitting for so long, I figured it was a good idea to go ahead and replace all the other fluids and filters, too.

Since then, we’ve also insulated the cab for sound and heat. Yet with such a big motor sitting directly under our seats, the noise cancellation is negligible, and without AC (not a standard feature of the LMTV), the insulation really just prevents the cab from getting overly hot when the engine’s running.

What’s that all add up to? Getting the truck home ended up costing us $5,000. The initial build-out, the new tires, and the other basic maintenance added another $7,000. At this point, the truck wasn’t quite where we wanted, but I thought it was at least livable, safe, and reliable.

Then, while driving over a mountain pass a couple weeks after completing all that work, the oil light came on. We pulled over, and noticed that a small line had blown, emptying five gallons of oil before we’d stopped. It took us a few days to get a new line custom fabricated in a small mountain town. I thought that was the end of the issue, but eight miles later, the engine dropped a valve, cracking the head. Coolant and oil poured out of the truck as we stood watching helplessly.

Towing the LMTV to a shop capable of working on it cost $703. Through social media, I found another owner willing to sell me a low-mileage used engine for $3,700, and shipping that here was $686. Pulling the old motor and dropping in that new one should be $3,500. New fluids, seals, and some other miscellaneous parts will be $800. A Caterpillar machine shop is doing that right now.

https://www.instagram.com/p/BZcb4YaA4nq/

So…Is The LMTV Worth It?

As much work and headache as it has given us, we love this truck. It’s a true go-anywhere, do-anything, live-in-the-back vehicle with unlimited potential. It’s fun to drive, and the project of building it into our home as a family has been a great experience.

The dollar signs have been adding up faster than we planned, but I still think the LMTV makes sense—for us. Let’s compare it to the cheapest viable alternative—a Sprinter 4×4 converted into an RV—so you can see my thinking. A fully built-out Sprinter van getting 19 miles per gallon would have cost us at least $30,000 more than where we stand now. Probably close to $95,000 total to really get it nice inside.

Given the global average price of diesel fuel (about $3), a circuitous route from Prudhoe Bay, Alaska, to Tierra del Fuego, Argentina (about 20,000 miles, and our plan for next year), driving a Sprinter would cost $3,200 in fuel. Taking the 8.5 MPG LMTV will use $7,100 in fuel.

Given the huge difference in purchase price, we would have to make that trip eight times for the Sprinter to break even, and we wouldn’t have anything like the living space of the LMTV.

Of course, it’s not for everyone. A machine like this will require enormous amounts of work and it won’t be easy to find people to service it. But, if after all those caveats, you’re still interested in one of these things, then read on about how you can make the process a wee bitt better.

https://www.instagram.com/p/BYZO3qTDDtQ/

Learn from Our Experience

We bought our truck from a mediocre reseller, where only the absolute minimum work had been done to get it rolling. That’s what led to the maintenance backlog—and the blown engine. At the time, we thought that was our only option given our budget, and pressing need for a larger vehicle.

What I wish we’d been able to do was buy a totally restored truck from well-respected Grigsby Trucks, based in Bend, Oregon. They buy the trucks at auction, then go through them nut-and-bolt to improve their reliability and drivability. A ready-to-go LMTV from Grigsby will set you back about $50,000. That’s about equal to our total investment, just with an awful lot less headache. Grigsby can also help maintain your LMTV, and build it out into your ultimate overland RV.

https://www.instagram.com/p/BYbhmeJAqrz/

What’s Next?

Once this new engine is finalized, we’re heading to Colorado, where we plan to spend the winter in our family’s barn, completing the rest of the build out. We plan to hit the road full-time next fall with really only one date in calendar: July 2, 2019, for the total solar eclipse in Chile.

After that: Who knows?

So you have finished reading the how to turn on a lmtv topic article, if you find this article useful, please share it. Thank you very much. See more: how to turn on lmtv lights, lmtv pmcs, lmtv tm m1083a1, tm 9-2320-391-10-2, m1078, lmtv pmcs checklist, lmtv pmcs item numbers, lmtv tm pdf

Top 42 How To Turn On A Lmtv Quick Answer

How many gears does an LMTV have?

How much is an LMTV?

Is the LMTV reliable?

How fast can an LMTV go?

What is the high beam symbol?

What kind of oil does a LMTV take?

How fast will a M1078 go?

What are LMTV used for?

How many soldiers can ride in an LMTV?

What are army cars called?

Can Civilians Buy Oshkosh trucks?

What brand are army trucks?

Where is the blackout drive light located?

What kind of oil does a LMTV take?

How to operate LMTV, FMTV, M1078: How to start and operate – YouTube

Multifunction Lever-Turn signals and headlight high beam brights in 2018 Dodge Grand Caravan – YouTube

Family of Medium Tactical Vehicles – Wikipedia

We Bought a Military Truck So You Don’t Have To – Outside Online

how to turn on a lmtv

how to turn on a lmtv

Family of Medium Tactical Vehicles

We Bought a Military Truck So You Don’t Have To

Leave a Comment Cancel reply